聚酯酰胺的合成

聚（酯酰胺）（PEA）的主链中同时具有酯键和酰胺键,兼具了聚酯（polyester）的生物降解性和相容性以及聚酰胺（polyamide）优异的机械性能,在药物控释、组织工程以及热塑性弹性体等领域应用广泛。缩合聚合是合成聚酯酰胺最初的方法,近年来开环聚合（ROP）成为制备聚酯酰胺的主要策略,本文从环状单体均聚、环状单体共聚、环状单体和线形单体共聚等方面总结了聚酯酰胺合成的研究进展。同时,介绍了基于多组分聚合反应（MCP）的新合成方法,并对聚酯酰胺材料的发展进行了探讨和展望。     

铁系化合物催化脂肪族环酯聚合反应

以常见铁系化合物为催化剂对L-丙交酯（L-LA）及与ε-己内酯（ε-CL）的开环聚合反应进行了研究,探讨了体系反应温度、反应时间和催化剂用量等因素对聚合反应的影响,以及L-丙交酯在以铁系化合物作为催化剂时的开环聚合反应机理。用凝胶渗透色谱（GPC）、核磁共振氢谱（1H-NMR）、电感耦合-等离子发射光谱（ICP-AES...     

Living Ring-Opening Polymerization of Cyclic Esters with Epoxide-Derived Titanium Alkoxides

Summary: The Ti^IIICp₂Cl-catalyzed radical ring opening of epoxides produces Ti alkoxides which initiate the ring-opening polymerization of ε-caprolactone. A linear dependence of on conversion, linear kinetics, low values, and the synthesis of block copolymers demonstrate a living process, while NMR spectroscopy confirms the presence of the initiator chain end. Epoxides are thus introduced as a new class of initiators for the Ti-catalyzed living ring-opening polymerization of cyclic esters.

The TiCp₂Cl-catalyzed radical ring opening of epoxides followed by the initiation of the living ring-opening polymerization of ε-caprolactone.     

Ring-Opening Polymerization of Cyclic Monomers with Aluminum Triflate

A green method for the controlled synthesis of aliphatic polymers is presented. The ring-opening polymerizations of cyclic monomers including several lactones, such as caprolactone (CL) or pentadecalactone (PDL), and cyclic anhydride monomers, such as succinic anhydride (SUC) and tetrahydrofuran (THF), catalyzed by a series of metal triflates (trifluoromethanesulfonate) were studied. Aluminum triflate was found to be an advantageous candidate to catalyze the ring-opening polymerization of cyclic monomers. The details of the ring-opening polymerization of CL catalyzed by aluminum triflate were studied. The maximum number average molecular weight (M_n), polydispersity (M_w/M_n) and yield of the obtained poly(-caprolactone) (PCL) at 60 °C for 6 hours were 18,400, 1.94 and 89 wt%, respectively. Those of poly(pentadecalactone) (PPDL) at 100 °C for 6 hours were 12,400, 2.24 and 49 wt%, respectively. The M_n, M_w/M_n and yield of the obtained poly(butylene succinate) (PBS) from SUC and THF at 100 °C for 48 hours were 4,900, 2.03 and 84 wt%, respectively. Furthermore, the mechanism of the polymerization was discussed based on the relationship between the conversion of CL and time. The molecular weight buildup of PCL was linear with a conversion in 50 min before the conversion reached 100 % and with M_w/M_n stabilized at about 1.5. The M_w/M_n of PCL then gradually increased. From these data, a living polymerization with a small transesterification was suggested from the PCL polymerization by aluminum triflate.     

Ring-Opening Polymerization of L-Lactide in Supercritical Chlorodifluoromethane

The ring-opening polymerization of L -lactide initiated by 1-dodecanol/stannous 2-ethylhexanoate (DoOH/Sn(Oct)₂) was carried out in supercritical chlorodifluoromethane at various reaction times, pressures, and temperatures. The monomer conversion increased to ca 70 % on increasing the reaction time to 25 h. The molecular weight of the product also increased to ca 75,000 g/mol over the same period. Increasing the pressure resulted in an accelerated polymerization rate. The pressure-induced increase in the rate of L -LA polymerization can be explained by the formation of chemical bonds in the transition state, which implies the production of a transition state with a lower partial molar volume than the reactants.     

Melt Polymerization of Adipic Anhydride (Oxepane-2,7-Dione)

Oxepane-2,7-dione (1) was prepared by the reaction of adipic acid and acetic anhydride followed by catalytic depolymerization under vacuum. the ring-opening polymerization of (1) was investigated in the melt, and was studied as a function of polymerization temperature, time and concentration of catalyst (stannous 2-ethylhexanoate). from ¹H-NMR and IR spectra it can be deduced that stannous 2-ethylhexanoate coordinates with the anhydride bond of the ring, and that the resulting species reacts with the monomer by ring-opening of the acyl-oxygen bond. These observations indicate a non-ionic insertion polymerization mechanism at the beginning of the reaction, but after 2 h at 80°C, anhydride exchange appears to be the dominating reaction. Ring-opening melt polymerization of (1) resulted in low molecular weight poly (adipic anhydride).     

Recent Advances in Metal-Mediated Stereoselective Ring-Opening Polymerization of Functional Cyclic Esters towards Well-Defined Poly(hydroxy acid)s: From Stereoselectivity to Sequence-Control

Poly(hydroxy acid)s are a family of biocompatible and (bio)degradable polyesters with various outcomes in different domains of application. To date, poly(hydroxy acid)s are best prepared by ring-opening polymerization (ROP) of the corresponding cyclic esters. Using racemic chiral monomers featuring side-chain groups enables to access, providing a stereoselective catalyst/initiator system is implemented, stereoregular functional polymers, thereby improving their physico–chemical properties, and ultimately, widening their range of uses. Here, we highlight a few important advances in metal-mediated stereoselective ROP of cyclic esters towards the synthesis of (functional) stereoregular poly(hydroxy acid)s that have recently been disclosed, emphasizing on (functional) β- and γ-lactones, diolide and O-carboxyanhydride (OCA) monomers and yttrium-based catalysis. Fine-tuning of the substituents flanked on the catalyst ligand enables reaching poly(hydroxy acid)s with syndiotactic and also isotactic microstructures. The stereocontrol mechanisms at work and their probable origin, relying on steric but also electronic factors imparted in particular by the ligand substituents, are discussed. Taking advantage of such stereoselective ROPs, original copoly(hydroxy acid)s with gradient or alternated patterns then become accessible from the use of mixtures of chemically different, oppositely configured enantiopure monomers.     

酚酞聚芳醚酮酮环状齐聚物的合成及开环聚合

从4,4’-二氟三苯二酮(DFTBDK)和酚酞出发,利用"拟高稀(pseudo high dillution)"技术,一步法制备酚酞聚芳醚酮酮环状齐聚物(c-PEKK-C),成环率78%。基质辅助激光解吸电离飞行时间质谱MALDI-TOF MS数据表明,聚合产物系聚合度为n=2~8的环状低聚物,其中以二、三聚体为主要成分(占环化产物的85%)。运用J-S高分子环化理论证实4,4’-二氟三苯二酮的单体结构有利于形成环状化合物。以4,4’-联苯二酚钾盐为催化剂,在300~350℃范围内,N2气保护下,环状齐聚物进行熔融开环聚合反应得到相应的线性高相对分子质量酚酞聚芳醚酮酮(ROP-PEKK-C),GPC测得其Mw为1.2×105。     

Synthesis and Polymerization Reactions of Cyclic Imino Ethers. 4. Aromatic Poly(ester amide)s of the AA+BB Type on the Basis of 2-Oxazolines

Poly(ester amide)s were prepared by thermally initiated polymerization from two aromatic bis(2-oxazoline)s and four aromatic dicarboxylic acids. Polymerizations were performed in bulk and in solution. The structure of the polymers formed was confirmed by spectral analysis. The synthesis is limited by the thermal stability of the starting compounds. Limitation of the solution polymerization is the solubility of the starting compounds and the products in the solvent used. The prepared polymers have very good thermal properties.     

沸石咪唑酯骨架-67高效催化L-丙交酯的开环聚合反应

为了探究沸石咪唑酯骨架材料(Zeolitic Imidazolate Frameworks,ZIFs)结构中的金属单元对其催化活性的影响,我们采用室温法合成了ZIF-8、Zn/Co-ZIF和ZIF-67,并用其催化L-丙交酯的本体开环聚合反应。 在相同的反应条件下,ZIF-67具有最高的催化活性。 与2-甲基咪唑(配体)作为催化剂相比,ZIF-67催化得到的聚乳酸具有高度全同立构结构。 此外,基质辅助激光解吸-飞行时间(MALDI-TOF)质谱表明,ZIF-67催化得到的聚乳酸主要为线状结构。 经过3次循环反应后,ZIF-67的催化活性没有明显降低。     

NMP与ROP相结合制备PCL-b-PSt共聚物及其性能研究

以4-羟基-2,2,6,6-四甲基哌啶氮氧自由基（HTEMPO）为引发剂,通过ε-己内酯（ε-CL）的开环聚合,合成末端基为氮氧自由基的聚己内酯（PCL-T）。在其调控下,进行过氧化苯甲酰（BPO）引发苯乙烯（St）的自由基聚合,合成结构规整的聚己内酯-b-聚苯乙烯（PCL-b-PSt）共聚物。用氢核磁共振（1H-NM...     

用于环酯单体开环聚合的无金属引发/催化体系

环酯单体在不同引发/催化体系作用下的开环聚合是制备可生物降解脂肪族聚酯的主要方法。综述了近年来用于环酯单体开环聚合的无金属引发/催化体系,主要涉及水、醇、胺、羧酸等引发剂及质子酸、膦类、氮杂环类化合物等催化剂体系。     

用于环酯单体开环聚合的无金属引发/催化体系

环酯单体在不同引发/催化体系作用下的开环聚合是制备可生物降解脂肪族聚酯的主要方法.综述了近年来用于环酯单体开环聚合的无金属引发/催化体系,主要涉及水、醇、胺、羧酸等引发剂及质子酸、膦类、氮杂环类化合物等催化剂体系.     

Thermodynamic and Kinetic Polymerizability of Cyclic Esters

Recent advances in the controlled ring-opening polymerization (ROP) of cyclic aliphatic esters are reviewed with a particular attention to thermodynamics and kinetics of the polymerization of industrially important monomers, namely: lactide (LA), 1,4-dioxan-2-one (DX), and ϵ-caprolactone (CL). For comparison, polymerization of β-lactones is discussed. Progress in stereocontrolled polymerization of monomers bearing centers of chirality [LA and β-butyrolactone (BL)] is also briefly reviewed.     

Poly(ester amide)s derived from L‐tartaric acid and amino alcohols. II. Aregic polymers

A series of aregic poly(ester amide)s (a‐PEAT6) with ester/amide ratios (a : b) varying from 1 : 19 to 1 : 2 were prepared with L ‐tartaric acid, 6‐aminohexanol, and 1,6 hexanediamine as the starting materials. Polycondensation in a solution of the diamine with mixtures of pentachlorophenyl‐activated di‐O‐methyl‐L ‐tartaric and 6‐aminohexyl‐di‐O‐methyl‐L ‐tartaric acids led to a‐PEAT6(a : b), with the a : b ratio determined by the composition of the feed. The newly synthesized poly(ester amide)s were characterized by elemental analysis, size exclusion chromatography, and IR and NMR spectroscopy. They had number‐average molecular weights between 25,000 and 45,000 and were highly crystalline, showing melting temperatures ranging from 100 to 230 °C and glass‐transition temperatures oscillating between 50 and 100 °C. The thermal degradation of a‐PEAT6(a : b) began above 200 °C and concluded with a final weight loss between 60 and 90% of the initial mass. The process evolved with the formation of cyclic tartarimide units and extensive main‐chain scissions. The degradation mechanism is discussed in relation to the chemical composition and microstructure of the polymers. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2687–2696, 2000     

Cyclic(arylene ether) oligomers containing the phenylphosphine oxide moiety

A series of cyclic(arylene ether) oligomers containing the phenylphosphine oxide moiety has been synthesized by reaction of bis(4-fluorophenyl)phenylphosphineoxide with dihydroxy compounds 1a–d as well as 1,2-dihydro-4-(4-hydroxyphenyl) (2H)phthalazin-1-one in DMF in the presence of anhydrous K₂CO₃ under high dilution conditions. These cyclic oligomers are amorphous and have high solubility in organic solvents. The MALDI-TOF-MS technique has been used as a powerful tool to analyze these cyclic systems. The cyclic(arylene ether) oligomers readily undergo anionic ring-opening polymerization in the melt at 350°C by using potassium 4,4′-biphenoxide as the initiator, affording linear, high molecular weight poly(arylene ether)s containing the phenylphosphine oxide moiety. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 519–526, 1998     

Solid Phase Synthesis of 4（1H）Quinolones from Resin—Bound Cyclic Malonic Ester

The solid phase synthesis of 4(1H) quinolones has been reported.     

Synthesis of poly(glycolic acid‐alt‐12‐aminododecanoic acid): The thermal polymerization kinetics of sodium N‐chloroacetyl‐12‐aminododecanoate

A new regular poly(ester amide) consisting of glycolic acid and 12‐aminododecanoic acid was synthesized by a thermal polycondensation method involving the formation of a metal halide salt. Polymerization could start in liquefied or solid phases, depending on the reaction temperature. The polymerization kinetics were investigated by isothermal and nonisothermal isoconversional methods. The reaction model was selected with both Coats–Redfern and isokinetic relationships. The activation energy was higher when the reaction took place mainly in the solid state. A compensation effect was found between the frequency factor and the activation energy. The thermal properties of the new polymer were studied as well as the isothermal crystallization from the melt state. Melt‐grown spherulites were studied by means of polarizing optical microscopy. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1199–1213, 2006