Metallosupramolecular Chemistry in Two Dimensions

Ultrathin films of metallosupramolecular coordination polyelectrolytes (MEPEs) on planar solid substrates assembled by electrostatic layer-by-layer self-assembly (ELSA) are characterized with UV-vis spectroscopy, optical ellipsometry, and X-ray reflectometry. MEPEs based on different ditopic ligands and transition metal ions are employed and shown to form regular ELSA multilayers. A quantitative analysis is in agreement with a surface coverage of approximately two MEPE monolayers per deposition step. In addition, we demonstrate that multilayers of MEPEs with different transition metal ions can be assembled. Even with kinetically labile metal ions, there is no metal ion exchange in these multilayers. Absorption spectra of multilayers on silicon show a band inversion of the MLCT band, which is rationalized in terms of optical effects.     

Redox processes of cytochrome c immobilized on solid supported polyelectrolyte multilayers

The heme protein cytochrome c (Cyt-c), immobilized on polyelectrolyte multilayers on a silver electrode, was studied by stationary and time-resolved surface-enhanced resonance Raman (SERR) spectroscopy to probe the redox site structure and the mechanism and dynamics of the potential-dependent interfacial processes. The layers were built up by sequential adsorption of polycations (poly[ethylene imine] (PEI); polyallylamine hydrochloride (PAH)) and polyanions (poly[styrene sulfonate] (PSS)). All multilayers terminated by PSS electrostatically bind Cyt-c. On PEI/PSS coatings, Cyt-c is peripherally bound and fully redox-active. Due to the interfacial potential drop, the apparent redox potential is lowered by 40 mV compared to that in solution. The rate constant for the heterogeneous electron transfer (ET) of ca. 0.1 s(-1) is consistent with electron tunneling through largely ordered PEI/PSS layers. ET is coupled to a reversible conformational transition of Cyt-c that involves a change of the coordination pattern of the heme. Additional (PAH/PSS) double layers cause a broadening of the redox transition and a drastic negative shift of the redox potential, which is attributed to the formation of PSS/Cyt-c complexes. It is concluded that Cyt-c can effectively compete with PAH for binding of PSS, resulting in a rearrangement of the layered structure and a penetration of the PSS-bound Cyt-c into the PAH/PSS double layers. This conclusion is consistent with SERR intensity and quartz microbalance measurements. ET was found to be overpotential-independent and faster than that for PEI/PSS coatings, which is interpreted in terms of specific PSS/Cyt-c complexes serving as gates for the heterogeneous ET.     

Hybrid Electrochromic Multilayer Films Based on Fe(II)-Metalloviologens and TiO2 Nanoparticles

Metallosupramolecular coordination polyelectrolyte, Fe(II)-metalloviologen(FEN), was prepared by the reaction of Fe(II) with a novel bisterpyridine ligand. As active components, FENs could be assembled into electrochromic multilayer films with negative charged polystyrene sulfate(PSS) by the sequential deposition layer-by-layer technique. Numerous analytical instruments, such as UV-Vis spectroscopy, atomic force microscopy(AFM), tunneling electron microscopy(TEM), zeta-potential measurement and electrochemical measurement have been utilized to characterize their morphology, optical and electrochromic properties. It has been observed that as-prepared films exhibited multi-colour changes by triggering with different potentials. However, the low optical contrast of multilayer films would limit their further applications. In order to overcome this problem, semiconductor TiO₂ nanoparticles(TiO₂) were incorporated into FEN multilayers by layer-by-layer approach. By carefully optimizing the film structure, as-resulted hybrid films containing FEN, TiO₂ and PSS exhibited high optical contrast, suitable response time and long-term stability. Such hybrid films should be promising candidates to meet the requirements for deve- loping flexible displays and electrochromic devices.     

Assembly of Alternated Multivalent Ion/Polyelectrolyte Layers on Colloidal Particles. Stability of the Multilayers and Encapsulation of Macromolecules into Polyelectrolyte Capsules

Alternating adsorption of multivalent ions and oppositely charged polyelectrolytes on colloid particles has been investigated. Multilayer films composed of Tb³⁺/polysterene sulfonate (PSS) and 4-pyrene sulfate/polyallylamine (PAH) were successfully assembled on polysterene sulfonate (PS) and melamine formaldehyde (MF) latex particles. The amount of assembled material was estimated by fluorescence and the linear growth of the film versus the number of layers was demonstrated. These multilayers are not stable and can be decomposed by salt and temperature. Dissolution of MF particles leads to formation of hollow capsules consisting of multivalent ion/polyelectrolyte multilayers. Comparative analysis of the capsules was done by confocal and scanning force microscopy. Complex hollow spheres consisting of Tb³⁺/PSS or 4-PS/PAH as an inner shell and stable PSS/PAH as an outer shell were produced. Due to selective permeability of the outer shell after degradation of the inner shell the multivalent ions are released out of the capsule while the polyelectrolytes fill the capsule interior. This is indicative of swelling of the capsule by osmotic pressure. The filled capsules were studied by confocal and scanning electron microscopy. Possibilities of encapsulating macromolecules in defined amounts per capsule are discussed.     

新型“内标”式双重荧光自组装膜的制备和DNA的界面传感

为了有效降低依据单一荧光强度定量分析的误差, 充分发挥自组装膜设计灵活、制备简单且分析灵敏度高的优点, 提高荧光定量分析的准确度和灵敏度, 本文提出构建“内标”式自组装膜, 即于硅烷化石英表面分别组装吖啶橙(AO)和量子点CdTe. 以AO为内标, CdTe为荧光探针, 通过静电吸引作用于AO和CdTe之间, 依次组装聚苯乙烯磺酸钠(PSS)和壳聚糖(CS). PSS和CS的组装有效地“屏蔽”了AO, 使其荧光强度I1不随分析物种浓度的引入而变化, 这样既可发挥荧光内标作用, 又使膜外层量子点CdTe的荧光强度I2随分析物种浓度的改变而改变. 所构建的自组装膜双重荧光强度比I2/I1不随激发光强度的波动和传感器位置的移动等微环境变化而变化, 但与被分析物种的浓度呈良好的线性关系, 从而实现了直接利用I2/I1准确定量的“内标”式荧光分析, 显著提高了荧光分析的准确度.     

Poly(ethylene glycol)–poly(L‐lactide) star block copolymer hydrogels crosslinked by metal–ligand coordination

The aqueous solution behavior and thermoreversible gelation properties of pyridine‐end‐functionalized poly(ethylene glycol)–poly(L ‐lactide) (PEG–(PLLA)₈–py) star block copolymers in the presence of coordinating transition metal ions were studied. In aqueous solutions, the macromonomers self‐assembled into micelles and micellar aggregates at low concentrations and formed physically crosslinked, thermoreversible hydrogels above a critical gel concentration (CGC) of 8% w/v. In the presence of transition metal ions like Cu(II), Co(II), or Mn(II), the aggregate dimensions increased. Above the CGC, the gel–sol transition shifted to higher temperatures due to the formation of additional crosslinks from intermolecular coordination complexes between metal ions and pyridine ligands. Furthermore, as an example, PEG–(PLLA)₈–py hydrogels stabilized by Mn(II)–pyridine coordination complexes were more resistant against degradation/dissolution when placed in phosphate buffered saline at 37 °C when compared with hydrogels prepared in water. Importantly, the stabilizing effect of metal–ligand coordination was noticeable at very low Cu(II) concentrations, which have been reported to be noncytotoxic for fibroblasts in vitro. These novel PEG–(PLLA)₈–py metallo‐hydrogels, which are the first systems to combine metal–ligand coordination with the advantageous properties of PEG–PLLA copolymer hydrogels, are appealing materials that may find use in biomedical as well as environmental applications like the removal of heavy metal ions from waste streams. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Oligosilsesquioxanes as versatile building blocks for the preparation of self-assembled thin films

A self-assembly approach to the preparation of nanocomposite siliceous thin films by using oligosilsesquioxanes as building blocks is presented. Poly(styrene-4-sulfonate), PSS, and octa(3-aminopropyl)silsesquioxane, NSi8, were layer-by-layer (LbL) assembled onto planar substrates and polystyrene (PS) particles, thus forming composite multilayers. We have clarified the binding properties of NSi8 to PSS by examining the pH influence on film buildup by microelectrophoresis (zeta-potential) and quartz crystal microgravimetry (QCM). The regular growth of PSS/NSi8 multilayers on planar supports was confirmed by surface plasmon resonance (SPR) spectroscopy and QCM. By applying the LbL coating procedure to spherical templates, we prepared compact, microporous hollow silica spheres by calcining PS spheres coated with (poly(allylamine hydrochloride) (PAH)/PSS)(2)/(NSi8/PSS)(n) (n varying from 3 to 12), at 750 degrees C, because of sintering of the octameric clusters (NSi8). Hollow spheres derived from coatings with n = 3 drastically altered in size (relative to the template core), depending on the size of the PS particles used. The novelty of this method for the nanofabrication of siliceous films stems from the use of well-defined and discrete building blocks, such as NSi8, leading to homogeneous organic-silica composite films as well as individual siliceous particles of variable size and shape.     

Metallosupramolecular Thin Polyelectrolyte Films

Molecular recognition and electrostatic interaction of oppositely charged polyelectrolytes are combined in the fabrication of ultrathin metallosupramolecular multilayers [shown schematically in the picture, PEI=polyethyleneimine, PSS=poly(styrene sulfonate)]. The layers between the PSS layers are composed of an iron(II ) bis(terpyridine) coordination polymer.     

Layer‐by‐layer self‐assembly of a metallo‐supramolecular coordination polyelectrolyte studied by infrared spectroscopy,microgravimetry, and X‐ray reflectance

Layer‐by‐Layer self‐assembly on planar substrates of a Fe(II) metallo‐supramolecular coordination polyelectrolyte (MEPE) and poly‐(styrene sulfonate) (PSS) is investigated with a variety of surface sensitive techniques. Results from reflection‐absorption infrared (RAIR) spectroscopy and microgravimetry are in agreement with linear multilayer build‐up. Furthermore, RAIR spectroscopy indicates close to complete counter ion exchange during polyion deposition. The multilayers contain approximately 20 mass‐percent water under ambient conditions. Water uptake and loss is completely reversible. Annealing to 250°C in air does not affect the structural integrity of the film as demonstrated by XRR measurements.     

New characterization of layer-by-layer self-assembly deposition of polyelectrolytes on cotton fabric

Layer-by-layer self-assembly deposition of polyelectrolytes on textile materials might provide a new approach to endue different functions to textiles. Two simple characterization methods for electrostatic self-assembly deposition of two typical polyelectrolytes, poly(sodium 4-styrenesulfonate) (PSS) and poly(diallyldimethylammonium chloride) (PDDA) on cotton fabrics were investigated in this paper. Dyeing of the PSS/PDDA assembled cotton fabrics with anionic Direct Red 80 and cationic Methylene Blue shows regular and observable “odd–even” oscillations in terms of color depth (K/S value), which could be utilized for the assessment of the variation of surface electric property of the cotton substrate due to the alternate fabrication of PSS and PDDA on it. A linear increase in UV absorbance at 226 and 261 nm of treated cotton fabrics further revealed that the growth of these layer-by-layer multilayers could be recorded by monitoring UV spectra of assembled cotton specimens. ATR FT-IR spectra did not show any identifiable differences between cotton substrates with and without deposition of PSS/PDDA multilayers.     

Preparation and Characterization of Polyesterurethane Metallopolymers Containing Transition Metal Ions

Several series of metallopolymers (MP) were synthesized from a MDI-based polyesterurethane and various transition metal ion species, namely, copper(II), manganese(II), cobalt(II), iron(III) and chromium(III). Each series of MP were prepared by using different initial molar ratios urethane groups/metal ions (U/M). MP were characterized in comparison with the parent polyurethane (PU) by atomic absorption spectrometry (AAS), UV-vis absorption spectroscopy, FT-IR spectroscopy, differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), thermogravimetric analysis (TGA) and tensile testing. The transition metal ions form coordination complexes with polyurethane functional groups, the intermolecular complexation resulting in the crosslinking of polymer chains. As a consequence, modifications take place in the original structure of PU, e.g. hydrogen bonding and crystallinity of the hard-segment domains. MP compared with PU present differences in viscoelastic and mechanical behaviors, which generally indicate the reinforcing effect of metal ions on the polyurethane matrix, as well in thermal stability. It was revealed that each transition metal ion has specific effects on the structure and properties of PU. The implications and mechanisms behind these observations are discussed.     

Manganese(II)-containing MRI contrast agent employing a neutral and non-macrocyclic ligand

The ligand N,N'-bis(2-pyridylmethyl)-bis(ethylacetate)-1,2-ethanediamine (debpn) coordinates divalent transition metal ions in either a pentadentate or hexadentate fashion. The coordination number correlates with the ionic radius of the metal ion, with larger cations being heptacoordinate as assessed by solid-state analysis. With Mn(II), the debpn ligand is hexadentate and remains bound to the oxophilic metal ion, even when dissolved in water. The ligand's incomplete coordination of the manganous ion allows water molecules to coordinate to the metal center. These two properties, coupled with the high paramagnetism associated with the S = 5/2 metal center, enable [Mn(debpn)(H(2)O)](ClO(4))(2) to serve as a stable and effective magnetic resonance imaging contrast agent despite the ligand's lack of both a macrocyclic component and an anionic charge.     

Counterions and water in polyelectrolyte multilayers: a tale of two polycations

Attenuated total internal reflectance Fourier transform infrared, ATR-FTIR, spectroscopy was used to compare the water uptake and doping within polyelectrolyte multilayers made from poly(styrene sulfonate), PSS, and a polycation, either poly(allylamine hydrochloride), PAH, or poly(diallyldimethylammonium chloride), PDADMAC. Unlike PDADMA/PSS multilayers, whose water content depended on the solution ionic strength, PAH/PSS multilayers were resistant to doping by NaCl to a concentration of 1.2 M. Using (infrared active) perchlorate salt, the fraction of residual counterions in PDADMA/PSS and PAH/PSS was determined to be 3% and 6%, respectively. The free energy of association between the polymer segments, in the presence of NaClO4, was about 5 kJ mol-1 and -10 kJ mol-1, respectively, for PDADMA/PSS and PAH/PSS, indicating the relatively strong association between the polymer segments in the latter relative to the former. Varying the pH of the solution in contact with the PAH/PSS multilayer revealed a transition to a highly swollen state, interpreted to signal protonation of PAH under much more basic conditions than the pKa of the solution polymer. The increase in the multilayer pKa suggested an interaction energy for PAH/PSS in NaCl of ca. 16 kJ mol-1.     

Polymer-metal complexes in polyelectrolyte multilayer films as catalysts for oxidation of toluene

We report on the binding of metal ions (Me(2+); Co(2+) and Cu(2+)) with weak polyelectrolyte multilayers (PEMs), as well as on catalytic activity of PEM-Me(2+) films for oxidation of toluene. Using several types of PEM films constructed using branched polyethyleneimine (BPEI) or quaterinized poly-4-vinylpyridines (QPVPs) as polycations and poly(acrylic acid) (PAA) or poly(styrene sulfonate) (PSS) as polyanions, we found that binding of Co(2+) and Cu(2+) ions with a PEM matrix can occur both through coordination to polycationic amino groups and/or ionic binding to polyacid groups. The amount of metal ions loaded within the film increased linearly with film thickness and was strongly dependent on polyelectrolyte type, film assembly pH, and fraction of permanent charge in polymer chains. Among various PEM-Me(2+) systems, BPEI/PAA-Co(2+) films assembled at pH 8.5 show the best catalytic performance, probably because of the preservation of high mobility of Co(2+) ions coordinated to amino groups of BPEI in these films. With BPEI/PAA-Co(2+) films, we demonstrated that films were highly permeable to reagents and reaction products within hundreds of nanometers of the film bulk; i.e., film catalytic activity increased linearly with layer number up to 30 bilayers and slowed for thicker films.     

Quadrupole ion trap studies of the structure and reactivity of transition metal ion pair complexes

Ion pairs are common species observed in the electrospray mass spectra of transition metal coordination complexes. To understand the nature of these ion pairs, a systematic study of the gas-phase chemistry of these species using ion-molecule reactions and collision-induced dissociation (CID) was carried out. Ion pair complexes of the type MLnX+ (where M is Mn(II), Fe(II), Co(II), Ni(II), Cu(II) or Zn(II), L is 1,10-phenanthroline, 2,2'-bipyridine, ethylenediamine, diethylenetriamine or 1,4,8,11-tetraazacyclotetradecane and X is Cl-, NO3-, acetylacetonate, ClO4-, acetate or SCN-) were studied. Ion-molecule reactions can distinguish whether the counterion in an ion pair is an inner- or outer-sphere ligand and can determine the coordination mode of the counterion. In addition, CID and ion-molecule reactions reveal some interesting chemistry of these complexes and unique coordination modes for some of the anions studied here were inferred from the ion-molecule reactions. For example, the thiocyanate ion is found to coordinate in a bidentate fashion in Zn(II) and Ni(II) complexes, contrasting behavior typically observed in solution. Also, certain Co(II) and Fe(II) ion pair complexes undergo oxidation reactions in which species such as dioxygen and nitric oxide from the counterions ClO4- and NO3- are transferred to the Co(II) and Fe(II) complexes, showing the inherent affinity of these metals for these molecules. These complexes were also studied by ion-molecule reactions and CID. Dioxygen in complexes formed by CID is demonstrated to be bidentate, suggesting the formation of a peroxo ligand with concurrent oxidation of the metal.     

Hydrothermal-induced structure transformation of polyelectrolyte multilayers: from nanotubes to capsules

The assembled polyelectrolyte nanotubes composed of poly(styrenesulfonate) and poly(allylamine hydrochloride) multilayers by using the layer-by-layer assembly combined with the porous template method can be transformed into capsules by a high-temperature treatment. Scanning electron microscopy and confocal laser scanning microscopy images revealed the whole transition process. The structure transformation of polyelectrolyte multilayers after annealing can be initiated by the input of thermal energy which leads to a breakage of ion pairs between oppositely charged polyelectrolyte groups. The transition process from tubes to capsules is supposed to be driven by the Raleigh instability and leads to the generated polyelectrolyte capsules with different sizes.     

Ligand and metal-ion effects in metal-ion clusters used for chiral analysis of alpha-hydroxy acids by the kinetic method

Chiral recognition of alpha-hydroxy acids has been achieved, and mixtures of enantiomers have been quantified in the gas phase, by using the kinetics of competitive unimolecular dissociation of singly-charged transition metal ion-bound trimeric complexes, [M(II)(A)(ref*)(2)-H](+) (M(II)=divalent transition metal ion; A=alpha-hydroxy acid; ref*=chiral reference ligand), to form the dimeric complexes [M(II)(A)(ref*)-H](+) and [M(II)(ref*)(2)-H](+). Chiral selectivity, the ratio of these two fragment ion abundances for the complex containing the analyte in one enantiomeric form expressed relative to that for the fragments of the corresponding complex containing the other enantiomer, ranges from 0.65 to 7.32. Chiral differentiation is highly dependent on the choice of chiral reference compound and central metal ion. The different coordination geometry of complexes resulting from the different d-orbital electronic configurations of these transition metal ions plays a role in chiral discrimination. Of all the transition metal ions examined chiral recognition is lowest for Cu(II), because of large distortion of the coordination complexes, and hence weak metal-ligand interactions and small stereochemical effects. It seems that two independent pi-cation interactions occur when N-acetyl-substituted aromatic amino acids used as the reference ligands and this accounts for improved chiral discrimination. If both metal-ligand and ligand-ligand interactions are optimized, large chiral selectivity is achieved. The sensitive nature of the methodology and the linear relationship between the logarithm of the fragment ion abundance ratio and the optical purity, which are intrinsic to the kinetic method, enable mixtures to be analyzed for small enantiomeric excess ( ee) by simply recording the ratios of fragment ion abundances in a tandem mass spectrum.     

Layer-by-layer enzyme/polyelectrolyte films as a functional protective barrier in oxidizing media

The influence of a catalase (Cat) layer located at different depths in the layer-by-layer hemoglobin/polystyrene sulfonate films with an (Hb/PSS)(20)(-)(x)/(Cat/PSS)/(Hb/PSS)(x) (x = 0-20) architecture on kinetics of hemoglobin degradation under treatment with hydrogen peroxide solutions of different concentrations and features of H(2)O(2) decay in surrounding solutions has been studied. While assembled on the top of the multilayers, the catalase layer shows the highest activity in hydrogen peroxide decomposition. Hemoglobin in such films retains its nativity for a longer period of time. The effect of catalase layers is compared with that of protamine, horseradish peroxidase, and inactivated catalase. Positioning an active layer with catalytic properties as an outer layer is the best protection strategy for layer-by-layer assembled films in aggressive media.     

The CO/PC analogy in coordination chemistry and catalysis

This short account summarizes recent results obtained in the coordination chemistry of phosphinines and emphasizes their analogy with CO ligands. Reduced complexes can be easily assembled through the reaction of reduced 2,2′-biphosphinine dianions with transition metal fragments. Theoretical calculations were performed to establish the oxidation state of the metal in these complexes. Though many reduced complexes are available, phosphinines proved to be too sensitive toward nucleophiles to be used as efficient ligands in most catalytic processes. However, the high electrophilicity of the phosphorus atom can be exploited to synthesize phosphacylohexadienyl anions which exhibit a surprising coordination chemistry. When phosphino sulfide groups are incorporated as ancillary tridentate anionic SPS ligands can be easily produced. These ligands can bind different transition metal fragments such as M-X (M = group 10 metal, X = halogen), Rh-L (L = 2 electron donor ligand), Cu-X and Au-X (X = halogen). Palladium(II) complexes proved to be active catalyst in the Miyaura cross-coupling reaction. Bidentate anionic PS ligands were also synthesized following a similar approach. Their Pd(II) (allyl) derivatives showed a very good activity in the Suzuki catalyzed cross-coupling process that allows the synthesis of biphenyl derivatives through the reaction of phenylboronic acid with bromoarenes.     

Donnan permselectivity in layer-by-layer self-assembled redox polyelectrolye thin films

Redox polyelectrolyte multilayers have been assembled with use of the layer-by-layer (LBL) deposition technique with cationic poly(allylamine) modified with Os(bpy)(2)ClPyCHO (PAH-Os) and anionic poly(styrene)sulfonate (PSS) or poly(vinyl)sulfonate (PVS). Different behavior has been observed in the formal redox potential of the Os(II)/Os(III) couple in the polymer film with cyclic voltammetry depending on the charge of the outermost layer and the electrolyte concentration and pH. The electrochemical quartz crystal microbalance (EQCM) has been used to monitor the exchange of ions and solvent with the external electrolyte during redox switching. At low ionic strength Donnan permselectivity of anions or cations is apparent and the nature of the ion exclusion from the film is determined by the charge of the topmost layer and solution pH. At high electrolyte concentration Donnan breakdown is observed and the osmium redox potential approaches the value for the redox couple in solution. Exchange of anions and water with the external electrolyte under permselective conditions and salt and water under Donnan breakdown have been observed upon oxidation of the film at low pH for the PAH-Os terminating layer. Moreover, at high pH values and with PVS as the terminating layer EQCM mass measurements have shown that cation release was masked by water exchange.