PC/ABS及PC/ABS/PE-g-MAH共混体系相容性的研究

研究了聚碳酸酯与ＡＢＳ（ＰＣ／ＡＢＳ）及ＰＣ／ＡＢＳ与马来酸酐接枝聚乙烯共聚物（ＰＣ／ＡＢＳ／ＰＥ－ｇ－ＭＡＨ）共混体系的力学性能和应力开裂性能。用ＤＳＣ和ＳＥＭ研究了共混体系的相容性。结果表明：ＡＢＳ的加入能提高ＰＣ的冲击强度,ＡＢＳ的含量及品种影响ＰＣ／ＡＢＳ合金的力学性能,ＡＢＳ能提高ＰＣ的耐溶剂应力开裂性能。ＰＣ／ＡＢＳ／ＰＥ－ｇ－ＭＡＨ共混体系的力学性能和相容性优于ＰＣ／ＡＢＳ共混体系,     

增容聚苯乙烯共混物的研究进展

综述了增容聚苯乙烯与聚乙烯、聚丙烯、聚酰胺共混物的研究进展。不同共混物采用不同的增容剂,可使增容聚苯乙烯共混物改善分散相尺寸、界面相互作用与粘结,达到提高共混物的力学性能的目的。增容效果与增容剂的类型、用量和分子结构有关。     

Morphological and Structural Studies of sPS/aPS Blends

Inrecentyears,thenewsedricrystallinepolymersyndiotacticp0lystyrene(sPS)hasat-ITactedmuchattentionduetoitsg0odchendcalresistanceandenhancedmechanicalperformanceatelevatedtemPeratUre.'H0wever,itexhibitshighbrittlenessandpoorimPact-resistanceandtCar-resistance.2Therefore,itisnecessarytomodifyitwithtougheningpolyIners.AsimPlemeth0dto0verc0methedriscibilityofatwo-phaseblendofsPSandatougheningpolymristotwrovetheinterfacialaffmity,wheretheadditionofablockcoP0lymerisconsideredtobemosteffective.3…     

两个不同分子量聚苯乙烯混合体系的玻璃化转变

用差示扫描热量法测定了两个分子量不同的聚苯乙烯混合体系的玻璃化转变温度随组成的变化，并与Ｆｏｘ方程，Ｇｏｒｄｏｎ－Ｔａｙｌｏｒ方程和Ｃｏｕｃｈｍａｎ方程的预测结果进行了比较，以验证这些经验方程的适用性。     

聚氯乙烯／线性低密度聚乙烯共混体系的相容性

用动态力学分析（ＤＭＡ）和傅利叶变换红外光谱（ＦＴＩＲ）研究了氢化聚丁二烯－ｂ－聚甲基丙烯酸甲酯（ＨＰＢＤ－ｂ－ＰＭＭＡ）共聚物增容剂对聚氯乙烯（ＰＶＣ）与线性低密度聚乙烯（ＬＬＤＰＥ）共混体系的增容作用．增容剂使共混物中两相的玻璃化温度发生变化，说明其相容性增加．ＦＴＩＲ的结果表明，增容剂中羰基与ＰＶＣ的α氢形成氢键，使ＣＯ，Ｈ─Ｃ及Ｃ─Ｃｌ的振动频率变化，峰形加宽．     

LLDPE／EAA共混体系结晶行为及相容性

通过ＤＭＡ、ＤＳＣ、偏光显微镜（ＰＬＭ）、ＷＡＸＤ及力学性能测试等方法，对线性低密度聚乙烯（ＬＬＤＰＥ）／乙烯－丙烯酸共聚物（ＥＡＡ）共混体系的研究表明，ＬＬＤＰＥ与ＥＡＡ的非晶相可部分相容，结晶相不能形成共晶；共混物结晶时，两组分相互影响，ＬＬＤＰＥ的结晶速度高于ＥＡＡ，两者结晶没有进入对方晶胞中．还发现ＬＬＤＰＥ与ＥＡＡ力学性能上相容．低含量ＥＡＡ共混体系显示出较佳的力学性能．     

轻度磺化聚苯乙烯与聚苯乙烯共混物的流变性能表征

采用DSR-200动态应力流变仪研究了磺化度为0.98%(摩尔分数)的轻度磺化聚苯乙烯(SPS)离聚物及其锌盐(ZnSPS)与聚苯乙烯(PS)的共混物(PS/SPS,PS/ZnSPS)的流变性能.由于离聚物中离子聚集的物理交联作用,使其流变性能与PS相比有明显差别.动态频率实验结果表明,所有样品均可采用时温等效处理.另外,在与分子链运动相关的低频区,由于离子聚集的作用使得离聚物的模量远大于PS的模量.离聚物在稳态剪切作用下,由于离子聚集的破坏而表现出明显的屈服现象,并能用Utracki的屈服应力公式表征其屈服应力和零切粘度.此外,离聚物的屈服现象还与温度相关.由于动态和稳态实验分别测试离子聚集存在和破坏的不同材料状态,因此对离聚物无法应用Cox-Merz规则.动态和稳态实验结果均表明,PS/SPS和PS/ZnSPS的性能与组成的变化规律不同,意味着二者之间存在不同的离子聚集结构或相互作用.     

PES／PC共混体系的相容性与力学性能

ＰＥＳ／ＰＣ共混体系的相容性与力学性能姜振华，马荣堂，寇喜春，安立佳（吉林大学化学系长春）（中国科学院长春应用化学研究所长春１３００２２）关键词聚醚砜，聚碳酸酯，共混物，力学性能聚醚砜（ＰＥＳ）是一种性能优异的特种工程塑料，它具有强度高、刚性大、耐热...     

Influence of Domain Size on Toughness of Poly(styrene‐block‐butadiene) Star Block Copolymer/Polystyrene Blends

Summary: The toughness of poly(styrene‐block‐butadiene) star block copolymer/polystyrene (PS) blends have been investigated using the essential‐work‐of‐fracture approach. The blends show a co‐continuous or layer‐like structure of polystyrene‐rich and polybutadiene‐rich domains arising from the used extrusion process. A tough‐to‐brittle transition at a critical domain size of polystyrene‐rich domains of about 50 nm and a maximum in the non‐essential work of fracture at 20–30% PS (co‐continuous morphology) have been found.

Non‐essential work of fracture as a function of the mean thickness of polystyrene‐rich domains, demonstrating a tough‐to‐brittle transition at a critical domain thickness about 50 nm. AFM micrograph of a star block copolymer/PS‐blend containing 40% PS.     

HDPE/EPO共混体系的相容性及共晶结构

聚乙烯、聚丙烯、乙丙共聚物等非极性聚合物不相容[1],共混可以获得具有良好综合性能的材料。本文选用乙烯 丙烯 辛烯 1三元共聚物(EPO)和HDPE/EPO共混体系,在乙丙共聚物主链上引人较长的支链,以期改善其不相容性。1　实验部分高密度聚乙烯(HDPE:日本三井油化公司,商品号7000F);乙烯 丙烯 辛烯 1三元共聚物(EPO,长春应用化学研究所,重量比E/P/O=92 63/7 37/0 5)。称取HEPE/EPO(w/w):0/100、10/90、30/70、50/50、70/30、90/10、100/0样品溶于二甲苯中,加热溶解1h(溶液浓度5% 10%),搅拌均匀后趁热倒入大量无水乙醇中沉淀,静…     

超临界CO2溶胀聚合法制备聚丙烯酸/尼龙1313及聚苯乙烯/尼龙1313共混物

超临界CO2溶胀聚合法制备聚丙烯酸/尼龙1313及聚苯乙烯/尼龙1313共混物;超临界CO2;聚丙烯酸;聚苯乙烯;尼龙1313;共混     

Blends of bisphenol-A polycarbonate and acrylic polymers: III. Effect of imide concentration on compatibility

Imide units copolymerized with MMA units have been selected in order to improve compatibility between PC and acrylics through specific interaction or internal repulsion. Good dispersion of acrylic inside a PC matrix has been observed upon melt mixing, which can be partially explained by the good rheological agreement between these two polymers. Transmission electron microscopy has shown that the system remains phase separated from 5 to 95 wt % of PC. Phase diagrams for three different imide concentrations have been drawn. Results obtained by DSC (conventional and with enthalpy relaxation) are similar to those obtained by optical cloud point detection. The phase diagrams show the raise of the PC/PMMA demixtion curve (LCST type) when percentage of imide increases in the acrylic phase. Theoretical calculations on binary interaction energy density show a slight improvement of the interaction between acrylic and PC when imide percentage increases. Cloud point measurements on 50/50 PC/acrylic blends varying the imide concentration show that the improvement of compatibility deduced from the raise of the demixtion curve (LCST type) is more related to a kinetic effect (the high T_g of imidized samples is reducing macromolecule mobility) than specific interactions. The calculated favorable interactions are probably too weak to be detected with cloud point measurements. The microstructures obtained after crystallization of the PC phase under solvent vapors in phase separated PC/acrylics blends can also be explained by T_g effects. Moreover, solvent vapor exposure could be a powerful tool to determine the real thermodynamic behavior of the blends at room temperature. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 749–761, 1997     

弹性体型聚氨酯和聚碳酸酯共混物的形态结构

用ＤＳＣ、ＷＡＸＤ和ＳＡＸＳ研究了溶液共混的弹性体型聚氨酯（ＰＵ）／聚碳酸酯（ＰＣ）共混物的结构。结果表明，ＰＵ／ＰＣ为部分相容体系；共混过程中，溶剂ＤＭＦ的诱导作用使ＰＣ形成结晶，其长周期与ＰＵ硬段形成微相的长周期相近     

线性低密度聚乙烯／乙烯醋酸乙烯共聚物共混体系的相容性及性能

线性低密度聚乙烯／乙烯醋酸乙烯共聚物共混体系的相容性及性能杨毓华＊白春霞花荣于李三喜（中国科学院长春应用化学研究所长春１３００２２）（沈阳化工学院高分子科学与工程系沈阳）关键词线性低密度聚乙烯，乙烯醋酸乙烯共聚物，共混，相容性，ＤＳＣ，ＷＡＸＤ，力...     

含碱性功能基聚合物反应性增容体系的研究

含碱性功能基聚合物反应性增容体系的研究胡静，张邦华，宋谋道，周庆业（南开大学高分子化学研究所，天津，３０００７１）关键词聚合物共混，反应性聚合物，碱性功能基，反应性增容通过共混单体方法制备聚合物“合金”是聚合物高性能化、开发材料新品种的主要方法。对于...     

Compatibilizing effect of polyarylate-polystyrene block copolymer in polyarylate/polystyrene blends

The compatibilizing effect of polyarylate-polystyrene (PAR-PS) block copolymer prepared from macroazo initiator was examined in polyarylate/polystyrene blends from the view-points of morphology, density, and thermal, mechanical, and rheological properties. PARPS block copolymer enhanced the mutual dissolution of the homopolymers. Reduced dispersed-domain size and increased density showed the efficiency of the block copolymer as a compatibilizing agent. Results from mechanical and rheological properties could also be explained by the compatibilizing effect of PAR-PS block copolymer in the blends. © 1994 John Wiley & Sons, Inc.     

双路易斯酸催化原位增容乙烯辛烯共聚物/苯乙烯共混物的研究

采用新型双路易斯酸, 三甲基氯硅烷和三氯化铟,为催化剂引发傅氏烷基化反应,实现了乙烯辛烯共聚物（POE）和聚苯乙烯（PS）共混物的原位增容。红外光谱验证了接枝物的存在。用扫描电镜观察了反应共混体系和简单物理共混物的形态, 前者分散相的尺寸小于1 μm, 后者分散相的尺寸则较大, 一般为3～4 μm。原位生成的接枝物起到相容剂的作用,增容后的样品的力学性能得到较明显的提升。如：当POE /PS 为40/60 (wt%) 时, 与相同组成的物理共混的POE/PS 相比, 其悬臂梁冲击强度由1.9 kJ/m2 增加到9.7 kJ/m2, 断裂伸长率由3.4%提高到46.3%。增容后共混物的流变性能与物理共混物相比也发生了显著的变化。     

iPS－b－iPP共聚物对iPS／iPP共混物的性能和形态影响的研究

报道了苯乙烯－丙烯等规嵌段共聚物（ｉＰＳ－ｂ－ｉＰＰ）增溶作用及ｉＰＳ－ｂ－ｉＰＰ／ｉＰＳ／ｉＰＰ三组分共混体系微观形态和力学性能的研究结果。ｉＰＳ－ｂ－ｉＰＰ的加入明显地改善了ｉＰＳ／ｉＰＰ二组分共混物的力学性能;共聚物含量超过１５％时,三组分共混物的抗冲击强度超过ＮＩＰＳ的抗冲击强度,并具有较高的耐热性。ＳＥＭ结果表明,ｉＰＳ－ｂ－ｉＰＰ在ｉＰＳ／ｉＰＰ共混中起到了相分散和相间“偶联”作用,并降低了共混体系的微相尺寸和增加相间相互作用或粘附性。ｉＰＳ－ｂ－ｉＰＰ／ｉＰＳ／ｉＰＰ共混合金具有高的软化温度和刚性。