Adsorption behavior of hydrophobically modified polyelectrolytes onto amino- or methyl-terminated surfaces

The adsorption of hydrophobically modified polyelectrolytes derived from poly(maleic anhydride-alt-styrene) (P(MA-alt-St)) containing in their side chain aryl-alkyl groups onto amino- or methyl-terminated silicon wafers was investigated. The effect of the spacer group, the chemical nature of the side chain, molecular weight of polyelectrolyte, and ionic strength of solution on the polyelectrolyte adsorbed amount was studied by null ellipsometry. The adsorbed amount of polyelectrolyte increased with increasing ionic strength, in agreement with the screening-enhanced adsorption regime, indicating that hydrophobic interactions with the surface play an important role in the adsorption process. At constant ionic strength, the adsorbed amount was slightly higher for polyelectrolytes with larger alkyl side chain and decreased with the hydrophobicity of aryl group. The adsorption behavior is discussed in terms of the side chain flexibility of the polymer. Characteristics of the adsorbed layer were studied by atomic force microscopy (AFM) and contact angle measurements. AFM images show the presence of aggregates and closed globular structure of polyelectrolyte onto the amino- or methyl-terminated surface, which agrees with a 3D and 2D growth mechanism, respectively. Fluorescence measurements showed that the aggregation of polyelectrolyte containing the hydrophobic naphthyl group occurs already in the solution. However, the aggregation of polyelectrolytes containing the phenyl group in its side chain is not observed in solution but is induced by the amino-terminated surface. This difference can be explained in terms of the higher flexibility of side chain bearing the phenyl group. The polyelectrolyte films showed a high chemical heterogeneity and moderate hydrophobicity.     

Effect of molecular interactions on the photophysics of Rose Bengal in polyelectrolyte solutions and self-assembled thin films

Solutions and layer-by-layer self-assembled thin films containing Rose Bengal and poly(diallyldimethylammonium chloride) are studied with the aim of understanding the interactions controlling their structures and the photophysics of the dye in both media. A detailed spectroscopic and theoretical analysis shows that hydrophobic interactions among dye molecules contribute to the coiling of the polyelectrolyte chain in solution at low polyelectrolyte/dye ( P/ D) ratios, whereas extensive aggregation of the dye takes place even at ratios as high as 10(4) (expressed in monomeric units). A polyelectrolyte elongated form prevails in self-assembled thin films, providing an environment that reduces hydrophobic interactions and lowers the aggregation tendency. Self-assembled films with a roughly estimated overall dye concentration around 1 M at a P/ D ratio in the order of seven are fluorescent and photogenerate singlet molecular oxygen. This contrasts with the behavior of polyelectrolyte solutions, which are almost nonfluorescent and do not evidence triplet state generation at the same P/ D ratio.     

Human serum albumin self-assembly on weak polyelectrolyte multilayer films structurally modified by pH changes

Adsorption of proteins onto film surfaces built up layer by layer from oppositely charged polyelectrolytes is a complex phenomenon, governed by electrostatic forces, hydrogen bonds, and hydrophobic interactions. The amounts of the interacting charges, however, both in polyelectrolytes and in proteins adsorbed on such films are a function of the pH of the solution. In addition, the number and the accessibility of free charges in proteins depend on the secondary structure of the protein. The subtle interplay of all these factors determines the adsorption of the proteins onto the polyelectrolyte film surfaces. We investigated the effect of these parameters for polyelectrolyte films built up from weak "protein-like" polyelectrolytes (i.e., polypeptides), poly(L-lysine) (PLL), and poly(glutamic acid) (PGA) and for the adsorption of human serum albumin (HSA) onto these films in the pH range 3.0-10.5. It was found that the buildup of the polyelectrolyte films is not a simple function of the pure charges of the individual polyelectrolytes, as estimated from their respective pKa values. The adsorption of HSA onto (PLL/PGA)n films depended strongly on the polyelectrolyte terminating the film. For PLL-terminated polyelectrolyte films, at low pH, repulsion, as expected, is limiting the adsorption of HSA (having net positive charge below pH 4.6) since PLL is also positively charged here. At high pH values, an unexpected HSA uptake was found on the PGA-ending films, even when both PGA and HSA were negatively charged. It is suggested that the higher surface rugosity and the decrease of the alpha-helix content at basic pH values (making accessible certain charged groups of the protein for interactions with the polyelectrolyte film) could explain this behavior.     

Interaction between block copolymer micelles and azobenzene-containing surfactants: from coassembly in water to layer-by-layer assembly at the interface

In this paper, we describe the use of block copolymer micelles to incorporate Azo-AOT, an azobenzene-containing amphiphile having a structure suitable for reverse micelle formation and the fabrication of polyelectrolyte/micelle multilayer films. Interestingly, it is found that the PS21-PAA157 micelles can incorporate more Azo-AOT molecules than the PS115-PAA15 micelles, which is different from the case of incorporation of noncharged hydrophobic molecules. Moreover, Azo-AOT incorporated into the PS21-PAA157 micelles undergoes a faster photoisomerization than in the PS115-PAA15 micelles, which seems to be related to different aggregation states of Azo-AOT in the two micelles. From the data of UV-vis spectra, we can infer that Azo-AOT adopts a reverse micelle-like aggregation state in the PS115-PAA15 micelles and disperses in the interface between the core and corona of PS21-PAA157 micelles. These polyelectrolyte/micelle films incorporating functional amphiphiles have great potential in the field of functional thin films.     

The role of complex formation in the flocculation of negatively charged sols with anionic polyelectrolytes

Summary Flocculation of negatively charged colloids by anionic polyelectrolytes, resulting from the adsorption of polymers on the colloid surface and from bridging of polymer chains between solid particles, is only possible if an appropriate concentration of electrolyte is present in the solution. Complex formation in the immediate vicinity of the sol surface between the counter cation and the functional groups of the polyelectrolyte plays a major role in the attachment of anionic polyelectrolytes to negative hydrophobic sols.Stability constants for Cu(II) polyacrylate and for the Ca complexes of a polyacrylic acid, hydrolyzed polyacrylamide and polystyrene sulfonate have been determined, and the effect of solution variables upon flocculation of AgBr/Br^– sols by anionic polyelectrolytes have been investigated. Ca⁺² ions affect the adsorption of polystyrenesulfonate on a negatively polarized mercury surface, as reflected in measurements of the differential capacitance; the presence of complex bound functional groups apparently changes the structure and orientation ability of the adsorbed polymer.With 5 figures in 10 details and 2 tables     

Counterions in layer-by-layer films--influence of the drying process

The amount of counterions, measured by means of X-ray photoelectron spectroscopy (XPS), in layer-by-layer (LbL) films of poly(allylamine hydrochloride) (PAH) and poly(styrene sulfonate) (PSS), prepared from solutions with various NaCl concentrations, is shown to be greatly influenced by the film drying process: a smaller amount of counterions is observed in films dried after adsorption of each layer, when compared with films that were never dried during the film preparation. This is attributed to the formation of NaCl nanocrystals during the drying process which dissolve when the film is again immersed in the next polyelectrolyte solution. The presence of bonded water molecules was confirmed in wet films indicating that the counterions near the ionic groups are immersed in a water network. The number of counterions is dependent on the amount of salt in polyelectrolyte solutions in such a way that for a concentration of 0.2 M the relative amount of counterions attains saturation for both dried and wet samples, indicating that the process which leads the aggregation of counterions near of the ionic groups is not influenced by the drying process. Moreover, it is proven for wet samples that the increase in salt concentration leads to a decrease in the number of PAH ionized groups as predicted by the Muthukumar theory [J. Chem. Phys. 120 (2004) 9343] accounting for the counterion condensation on flexible polyelectrolytes.     

Probing the pi-stacking induced molecular aggregation in pi-conjugated polymers, oligomers, and their blends of p-phenylenevinylenes

The role of pi-stack induced molecular aggregation on solution and solid-state luminescent properties was investigated for the tricyclodecane substituted bulky (p-phenylenevinylene)s (BTCD-60, with 60% bulky group), oligophenylenevinylenes (MEH-OPV and BTCD-OPV)s, and their polymer-oligomer binary blends. The natures of the solvent, concentration, solvent combinations (good or bad), and temperature were employed as stimuli to probe the origin of the molecular aggregates in bulky conducting polymers. Absorption, photoluminescence (PL), and time-resolved fluorescence spectroscopic techniques were employed as tools to trace aggregation in solvents such as toluene, tetrahydrofuran (THF), THF and methanol, or THF and water as well as in the solid state. The absorbance spectra of poly(2-methoxy-5-(2-ethylhexyloxy))-1,4-phenylenevinylene (MEH-PPV) and BTCD-60 indicated that the films obtained from polymers that were dissolved in aromatic solvents such as toluene were found to possess more pi-stacking as compared to that of films obtained from a good solvent such as THF. The solid-state emission spectrum of BTCD-60 was found to show almost a 5-6 times enhancement in PL intensity as compared to that of MEH-PPV. Concentration dependent excitation spectra of the polymers confirmed the presence of aggregated polymer chains in MEH-PPV, which is the main reason for the quenching of luminescence intensity in the polymer. Solvent induced aggregation studies of polymers in THF and methanol mixture further supports the existence of strong aggregation in MEH-PPV as compared to that of bulky BTCD-60. Variable temperature absorption studies confirmed the reversibility of molecular aggregation on heating/cooling cycles, and the extent of aggregation was found more in MEH-PPV chains as compared to that of BTCD-60. MEH-PPV/OPV binary blends were prepared in the entire composition range from 0 to 100% via solution blending techniques. Through selective PL excitation techniques, the effect of oligomer-to-polymer energy transfer and also luminescent enhancement in MEH-PPV via interchain separation were investigated. Both the energy transfer and the interchain separation were found to be more effective on the enhancement of luminescence properties in the BTCD blends as compared to that of MEH blends. Time-resolved fluorescence studies confirmed the existence of two types of species corresponding to the free and aggregated chains in the polymer matrix with lifetimes in the range of 0.5-2.0 ns. In the present investigation, we have successfully shown that the molecular aggregation of the pi-conjugated polymers, oligomers, and their binary blends can be controlled via suitable bulky substitution to tune their emission properties in solution as well as in the solid state.     

Multilayers of weak polyelectrolytes of low and high molecular mass assembled on polypropylene and self-assembled hydrophobic surfaces

Hydrophobic self-assembled octadecyltrichlorosilane (ODTS), ultrathin films of polypropylene, and ODTS modified with cationic dioctadecyldimethylammonium bromide are employed as substrates for deposition of multilayers of poly(allylamine hydrochloride) and poly(acrylic acid) from aqueous solution. The assembly of highly dissipative polyelectrolyte multilayers (PEMs) is demonstrated by quartz crystal microgravimetry. The initial rate of adsorption is faster and the adsorbed amount larger on the cationic surface, while the detailed structure of the PEMs, as determined by atomic force microscopy imaging, is related primarily to the molecular weight of the adsorbing polymers. A more extensive PEM adsorption on the hydrophobic surfaces takes place with increasing ionic strength of the background electrolyte solution. The water contact angle depends on the type of polymer adsorbed as the outermost layer, indicating that, despite the expected interdiffusion for the different polymer chains, there is a net macromolecular segregation to the free surface. Surface modification with the high molecular weight PEMs produces a more marked reduction of the hydrophilicity of the substrate.     

Unique behaviors of polymers having metalloporphyrin as their side chains

Several kinds of polymers having tetraphenylporphyrin (TPP) or some metallotetraphenylporphyrin (AgTPP, CuTPP, VOTPP or ZnTPP) moieties as their side chains have been prepared by the radical polymerization of the corresponding vinyl monomers. Visible spectra of these polymers show the clear hypochromism in the Soret bands of the tetraphenylporphyrin moieties as compared with those of the corresponding monomers. Polymer effects were clearly observed in the magnetic behaviors and the oxygen adsorption of paramagnetic metalloporphyrin moieties. In addition, polymer effects on photophysical and photochemical behaviors of ZnTPP were found in the amphiphilic polymers covalently tethered with small amounts of ZnTPP and hydrophobic substituents above a critical content, which form hydrophobic domains due to aggregation of the hydrophobic groups in aqueous solution.     

Novel Azobenzene-Functionalized Polyelectrolytes of Different Substituted Head Groups 2: Control of Surface Wetting in Self-Assembled Multilayer Films

A novel set of light-responsive polyelectrolytes has been developed and studied, to control and tune surface wettability by introducing various types of substituted R head-groups of azo polyelectrolytes in self-assembled multilayer (SAMU) films. As part of a larger project to develop polymer surfaces where one can exert precise control over properties important to proteins and cells in contact, photo-reversibly, we describe here how one can tune quite reliably the contact angle of a biocompatible SAMU, containing a photo-reversible azo chromophore for eventual directed cell growth. The azo polyelectrolytes described here have different substituted R head-group pairs of shorter-ionized hydrophilic COOH and SO₃H, shorter non-ionized hydrophobic H and OC₂H₅, and larger non-ionized hydrophobic octyl C₈H₁₇ and C₈F₁₇, and were employed as polyanions to fabricate the SAMU onto silicon substrates by using the counter-charge polycation PDAC. The prepared SAMU films were primarily characterized by measurement of their contact angles with water. The surface wetting properties of the thin films were found to be dependent on the type of substituted R-groups of the azo polyelectrolytes through their degree of ionization, size, hydrophobicity/hydrophilicity, solubility, conformation, and inter-polymeric association and intra-polymeric aggregation. All these factors appeared to be inter-related, and influenced variations in hydrophobic/hydrophilic character to different extents of aggregates/non-aggregates in solution because of solvation effects of the azo polyanions, and were thus manifested when adsorbed as thin films via the SAMU deposition process. For example, one interesting observation is significantly higher contact angles of 79° for SAMU films of larger octyl R groups of PAPEA-C₈F₁₇ and PAPEA-C₈H₁₇ than for others with contact angles of 64° observed for non-polar R-groups of OC₂H₅ and H. Furthermore, lower contact angle values of 59° for SAMU films with polar R-groups of COOH and SO₃H relative to that of non-polar R-groups are in accordance with their expected order of the hydrophilicity or hydrophobicity. It is possible that the large octyl groups are more effective in shielding the ionic functional groups on the substrate surface, and contributed less to the water drop-molecule interactions with ionic groups of the PDAC and/or AA groups. In addition, higher hydrophobicity of the SAMU films may be due to the incorporation of bulky and hydrophobic groups in these polyelectrolytes, which can produce aggregates on the surfaces of the SAMU films. Through understanding and controlling the complex aggregation behavior of the different substituted R-groups of these azo polyelectrolytes, and hence their adsorption on substrates, it appears possible to finely tune the surface energy of these biocompatible films over a wide range, enhance the photo-switching capabilities of the SAMU films, and tailor other surface properties for the development and application of new devices in diverse areas of microfluidics, specialty coatings, sensors, and biomedical sciences.     

Effect of Charge and Hydrophobicity on Adsorption of Modified Starches on Polyester

Polyester fabric (poly(ethylene terephthalate)) is a hydrophobic polymer. Its hydrophobic nature can be a disadvantage for certain applications like dyeing, finishing, detergency, etc. Physical or chemical modification of the polyester to make it more hydrophilic is therefore desirable for certain performance characteristics. Surface modification of polyester to make it hydrophilic can be achieved by adsorbing polymers on the polyester surface. Starch is a commonly available, hydrophilic polymer used in many textile applications that can be used to modify polyester. However, it needs to be chemically modified so that it can adsorb on the polyester fabric and physically modify the fabric characteristics. The polymers used in this study are two different modified starches—cationic and anionic starches and mixtures of the two. The adsorption kinetics on a polyester substrate was studied. The effect of charge and hydrophobicity on adsorption was investigated. Cationic starches were shown to readily adsorb on polyester and this was attributed to electrostatic interactions. Hydrophobic substituents on the cationic moiety resulted in increased adsorption. This was attributed to the weak hydrophobic interaction between the polymer chains which could result in a more coiled polymer conformation. It is hypothesized that more starch molecules are required for surface coverage of the polyester, resulting in an increase in adsorption. Anionic starch was adsorbed on the substrate but at a slower rate than the cationic starches. It is likely that there is a H bonding between acid groups on the starch and the ester groups of the polyester. However, the anionic starch is desorbed when the polyester is placed in an aqueous medium. When a blend of cationic starch and anionic starch was used, a low concentration of anionic starch was seen to increase adsorption, indicating that the polyelectrolyte complex itself may be adsorbing on the substrate. Further increases cause a decrease in adsorption as no sites may be available on the complex for adsorption. When hydrophobic substituents are present, addition of the anionic starch causes a decrease in adsorption at all concentrations. This was attributed to the “crosslinking” between the hydrophobically modified starch and the anionic polymer.     

Polymer colloids formed by polyelectrolyte complexation of vinyl polymers and polysaccharides in aqueous solution

The polyelectrolyte complex formed from the polyanion and polycation was studied by turbidimetry, static and electrophoretic light scattering, and elementary analysis. Sodium salts of polyacrylate (PA) and heparin (Hep) were chosen as the polyanion, and hydrochloric salts of poly(vinyl amine) (PVA) and chitosan (Chts) as the polycation. Although these vinyl polymers and polysaccharides have remarkably different backbone chemical structures and linear charge densities, all the four combinations PA-PVA, PA-Chts, Hep-PVA, and Hep-Chts provide almost stoichiometric polyelectrolyte complexes which are slightly charged owing to the adsorption of the excess polyelectrolyte component onto the neutral complex. The charges stabilize the complex colloids in aqueous solution of a non-stoichiometric mixture, and the aggregation number of the complex colloids increases with approaching to the stoichiometric mixing ratio. The mixing ratio dependence of the aggregation number for the four complexes is explained by the model proposed in the previous study.     

Nanostructured micellar films formed via layer-by-layer deposition of photoactive polymer

Photoactive nanostructured micellar films were prepared from the amphiphilic copolymer poly(sodium styrenesulfonate- stat-2-vinylnaphthalene) (PSSS- stat-VN) and cationic polyelectrolyte poly(diallyldimethylammonium chloride) (PDADMAC) or poly(allylamine hydrochloride) (PAH) on quartz and silicon substrates via layer-by-layer (LbL) electrostatic self-assembly. The macromolecules of this amphiphilic copolymer adopt a coiled micellar conformation in aqueous solution that is preserved in the films as evidenced by atomic force microscopy (AFM) and spectroscopic studies. The hydrophobic domains present in the film can serve as host sites for various organic molecules. The probe molecules reside in those isolated nanosize domains. Their aggregation and quenching of their emission is eliminated. The experiments showed a regular growth of multilayer thickness and the content of solubilized compounds in the films. Thus, a defined amount of the hydrophobic compounds of interest may be introduced into these water-processable polymeric films. Some stratification of the films was induced by the presence of stiff nanoparticle-like micelles. That makes these films an important new material for studies of photoinduced energy and electron transfer.     

Hydration contributions to association in polyelectrolyte multilayers and complexes: visualizing hydrophobicity

Thin films of polyelectrolyte complex were assembled using the multilayering method with direct, in situ observation of all multilayer components using attenuated total internal reflectance FTIR (ATR-FTIR). Buildup and ion doping of two representative combinations of positive and negative polyelectrolytes are controlled by salt type. The internal hydration of multilayers, measured precisely by ATR-FTIR, depends on the chemical identities of the polymers and the salt ions. The efficiency of doping inversely tracks the degree of hydration: less hydrated ("hydrophobic") ions are more efficient dopants, and less hydrated polyelectrolye complexes are harder to dope. Given that polyelectrolyte complexation is essentially entropy-driven, driving forces for doping, or association (the inverse of doping), are rationalized by counting all species in the condensed polyelectrolyte phase, including water molecules. For any combination of uni-univalent salt ions and polyelectrolyte, the strength of polyelectrolyte association is described by a single universal parameter. The magnitudes of the interactions per repeat unit are not high--a few kT--and are proportional to the number of water molecules released from the polymers when they form ion pairs. Hydration within multilayers due to residual salt is extensive but may be removed by an external osmotic stressing agent.     

Selective Ni-P electroless plating on photopatterned cationic adsorption films influenced by alkyl chain lengths of polyelectrolyte adsorbates and additive surfactants

We demonstrated that the photopatterned single-layer adsorption film of poly(1-dodecyl-4-pyridinium bromide) on a silica surface was available for a template of nickel-phosphorus (Ni-P) electroless plating through sensitization with a SnCl(2) aqueous solution and activation with a PdCl(2) aqueous solution. Four kinds of poly(1-alkyl-4-vinylpyridinium halide)s bearing methyl, propyl, hexyl, and dodecyl groups were prepared. The cationic polymers were adsorbed by a negatively charged silica surface from their solutions, to form single-layer adsorption films exhibiting desorption-resistance toward deionized water and ethanol. The organic adsorption films could be decomposed completely by exposure to 172 nm deep-UV light. The formation and decomposition of the single-layer films were confirmed by deep-UV absorption spectral measurement and zeta-potential measurement. Ni-P electroless plating was carried out on the photopatterned adsorption films, using three types of SnO(x) colloidal materials without and with cationic or anionic surfactant as catalyst precursors in the sensitization step. In the case of the negatively charged SnO(x) colloids surrounded by anionic surfactant, Ni-deposition took place preferentially on the cationic adsorption films remaining in unexposed regions. The Ni-deposition was accelerated significantly on the cationic adsorption film bearing dodecyl groups. It was obvious by ICP-AES analyses that the hydrophobic long-chain dodecyl groups in the adsorption film could promote the adsorption of the negative SnO(x) colloids on the film surface, followed by much nucleus formation of zerovalent Pd catalysts useful for the electroless plating. The result of our experiment clearly showed that, in addition to electrostatic interaction, van der Waals interaction generating between the hydrophobic long-chain hydrocarbons of the adsorption film and the surfactant improved significantly the adsorption stability of the SnO(x) colloids, resulting in highly selective Ni-deposition in accord with the photopattern shape of the cationic single-layer adsorption film.     

Adsorption of model surfactantlike copolymers on nanopatterned surfaces

The adsorption of polymers, copolymers, surfactants, and biopolymers is often used to engineer surfaces. Towards improving our understanding of polymer adsorption we report simulation results for the adsorption of model copolymers, resembling surfactants, on nanoscale patterned hydrophobic surfaces at infinitely dilute concentrations. The surfactants are composed by a hydrophobic tail and a hydrophilic head. Surfactant adsorption on the hydrophobic surface occurs in the tail-down configuration in which the tail segments are in contact with the surface. We investigate how the presence of a solid hard mask, used to create the nanoscale pattern on the underlying hydrophobic surface, affects the surfactant adsorption. We find that surfactant adsorption on the underlying hydrophobic surface is prevented when the characteristic dimensions of the solid hard mask are less than twice the radius of gyration. We also show that details about mask-surfactant head effective interactions have the potential to alter the characteristics of adsorption. When the mask repels the head segments, the surfactants hardly adsorb on the underlying hydrophobic surface. When the mask strongly attracts the surfactant heads, the surfactants may preferentially adsorb on the mask rather than on the underlying hydrophobic surface. Under these latter circumstances the adsorbed surfactants in some cases assume a head-down configuration in which the head segments are in contact with the mask and the tail segments extend towards the bulk solution. We explain our results in terms of enthalpy and entropy of adsorption and discuss practical implications.     

Wetting Films of the Aqueous Cationic Polyelectrolyte Solutions on Quartz

It was shown that the stability of the wetting films of aqueous cationic polyelectrolyte solutions on the flat quartz surface depends on solution concentration. At a low concentration, the films are stable owing to the electrostatic repulsive forces. At a high polyelectrolyte concentration, the films are unstable due to the hydrophobization of quartz and the appearance of the hydrophobic attractive forces in the films. In the intermediate concentration range, the films are metastable and their lifetime depends upon the competition between the electrostatic repulsive and hydrophobic attractive forces. Thus, the concentration of cationic polyelectrolyte substantially affects the wetting conditions of the quartz surface. This conclusion can also be extended to other solid surfaces negatively charged in aqueous solutions, which is inherent to the majority of natural materials.     

Cationic electrolyte adsorption layers on hydrophilic and hydrophobic surfaces

The capillary electrokinetics method (measurements of streaming potential and current in original and hydrophobized fused quartz capillaries with radii of 5–7 μm) is employed to study the formation of adsorption layers upon contact with solutions containing a cationic polyelectrolyte, poly(diallyldimethylammonium chloride). It is shown that polyelectrolyte adsorption causes the charge reversal of both hydrophilic and hydrophobic surfaces, with a smaller amount of the substance being adsorbed on the hydrophobic than on the hydrophilic surface. The adsorption on both surfaces increases with the polymer solution concentration. The cationic polyelectrolyte adsorption on the pure quartz surface occurs mainly due to the electrostatic attraction, while, in the case of the hydrophobic surface, the contribution of hydrophobic interactions increases. The study of the layer deformability shows that, on the hydrophilic surfaces, the layer ages and its structure depends on the polymer solution concentration. On the modified surface, the deformation of even freshly formed layers is slight, which suggests that a denser layer is formed on the hydrophobic surface. In contrast to the hydrophilic surface, the polyelectrolyte is partly desorbed from the hydrophobic surface.     

Microcalorimetric evidence of hydrophobic interactions between hydrophobically modified cationic polysaccharides and surfactants of the same charge

We synthesized and characterized a series of new polymers-hydrophobically modified cationic polysaccharides-based on dextran having pendant N-(2-hydroxypropyl)-N,N-dimethyl-N-alkylammonium chloride groups randomly distributed along the polymer backbone. These polymers are good candidates for studying the hydrophobic effect on polymer/surfactant association. In previous papers we reported their interactions with oppositely charged surfactants. For further insight into the relative importance of the hydrophobic interaction in the association process now we studied the thermodynamics of the interaction of these hydrophobically modified polymers with surfactants of the same charge (DMRX/CnTAC) by isothermal titration calorimetry (ITC). In order to try to discriminate the solution behavior of these polymer/surfactant systems, we analyzed separately the interaction of unmodified dextran with ionic surfactants and the interactions between the corresponding cationic surfactants. The interaction enthalpies for DMRX/CnTAC systems were derived from a proposed thermodynamic model with equations that describe the polymer-surfactant interactions. The thermodynamic parameters for the DMRX/CnTAC aggregation process as well as surfactant micellization in the presence of the polymer were also calculated. From all the results we were able to ascertain the effect on the interactions of changing the alkyl chain length of the polyelectrolyte pendant groups or the surfactant. The importance of the polymer aggregation state on the mechanism of interaction was also addressed.