Dynamics of grafted star-branched polymers. A Monte Carlo study

Monte Carlo simulations of simple models of star-branched polymers were carried out. The model chains were confined to simple cubic lattice and consisted of f = 3 branches of equal length and the total number of polymer segments as well as the density of grafted chains on the surface were varied. The chains have had one arm end attached to an impenetrable plate. The simulations were performed by employing the set of local micromodifications of the chain conformations. The model chains were athermal, i.e. good solvent conditions were modeled, the excluded volume effect was present at the model. The density of grafted chains on the surface was varied from a single chain up to 0.3. The static and dynamic properties of the system were studied. The influence of polymer concentration as well as the polymer length on static and dynamic properties of the system studied was shown. The relation between the structure and short-time dynamics (relaxation times) was discussed.     

Star-branched polymers in an adsorbing slit: a Monte Carlo study

A coarse-grained model of star-branched polymer chains confined in a slit was studied. The slit was formed by two parallel impenetrable surfaces, which were attractive for polymer beads. The polymer chains were flexible homopolymers built of identical united atoms whose positions in space were restricted to the vertices of a simple cubic lattice. The chains were regular star polymers consisted of f = 3 branches of equal length. The chains were modeled in good solvent conditions and, thus, there were no long-range specific interactions between the polymer beads-only the excluded volume was present. Monte Carlo simulations were carried out using the algorithm based on a chain's local changes of conformation. The influence of the chain length, the distances between the confining surfaces, and the strength of the adsorption on the properties of the star-branched polymers was studied. It was shown that the universal behavior found previously for the dimension of chains was not valid for some dynamic properties. The strongly adsorbed chains can change their position so that they swap between both surfaces with frequency depending on the size of the slit and on the temperature only.     

Properties of branched confined polymers

A model of star-branched polymer chains confined in a slit formed by two parallel surfaces was studied. The chains were embedded to a simple cubic lattice and consisted of f=3 branches of equal length. The macromolecules had the excluded volume and the confining surfaces were impenetrable for polymer segments. No attractive interactions between polymer segments and then between polymer segments and the surfaces were assumed and therefore the system was a thermal. Monte Carlo simulations were carried out employing the sampling algorithm based on chain's local changes of conformation. Lateral diffusion of star-branched chains was studied. Dynamic properties of star-branched chains between the walls with impenetrable rod-like obstacles were also studied and compared to the previous case. The density profiles of polymer segments on the slit were determined. The analysis of contacts between the polymer chain and the surfaces was also carried out.     

Structure of Adsorbed Polymer Chains: A Monte Carlo Study

The structure of adsorbed polymer chains was studied using simplified lattice models. The model chains were adsorbed on an impenetrable surface with an attractive potential. The dynamic Monte Carlo simulations based in the Metropolis scheme were carried out using these models. The influence of the internal chain architecture (linear, star‐branched and ring chains) and the degree of adsorption on the chain's structure was studied. It was shown that for weakly adsorbed chain regime the ring polymers which exhibit an almost twice as high degree of adsorption compared to linear and star chains have a higher number of adsorbed parts of chain (trains). But the length of such train remains almost the same for all types of a polymer chain. Star‐branched chains exhibit a slightly different change in number and the mean length of trains, loops and tails with the temperature and the chain total length compared to two other types of chain.     

Computer Simulation of Adsorbed Polymer Chains with a Different Molecular Architecture

Simulations of simple models of polymer chains were carried out by the means of the dynamic Monte Carlo method. The model chains were confined to a simple cubic lattice. Three different chain architectures were studied: linear, star‐branched and ring chains. The polymer model chain interacted with an impenetrable surface with a simple contact attractive potential. It was found that size parameters of all these polymers obey scaling laws. The temperatures of the transitions from weakly to strongly adsorbed chain were determined. It was shown for weakly adsorbed chains that ring polymers are always ca. 50% more adsorbed than linear and star‐branched ones. The properties of adsorbed linear and star‐branched polymers are very similar in the length of chain and the strength of adsorption studied. Strongly adsorbed ring polymers are still more adsorbed but differences between all kinds of chains become less pronounced.     

A simple model of stiff and flexible polymer chain adsorption: the influence of the internal chain architecture

In this study, we investigated the process of random sequential adsorption of stiff and flexible polymer chains on a two-dimensional square lattice. The polymer chains were represented by sequence of lattice points forming needles, T shapes, and crosses as well as flexible linear chains and star-branched chains consisted of three and four arms. The Monte Carlo method was employed to generate the model systems. The percolation threshold and the jamming threshold were determined for all systems under consideration. The influence of the chain length and the chain architecture on both thresholds was calculated and discussed. The changes in the ordering of the system were also studied.     

Dynamics of star branched polymers in a matrix of linear chains — a Monte Carlo study

A simple cubic lattice model of the melt of 3-arm star-branched polymers of various length dissolved in a matrix of long linear chains (n₁ = 800 beads) is studied using a dynamic Monte Carlo method. The total polymer volume fraction is equal to 0,5, while the volume fraction of the star polymers is about ten times smaller. The static and dynamic properties of these systems are compared with the corresponding model systems of isolated star-branched polymers and with the melt of linear chains. It has been found that the number of dynamic entanglements for the star polymers with arm length up to 400 segments is too small for the onset of the arm retraction mechanism of polymer relaxation. In this regime dynamics of star-branched polymers is close to the dynamics of linear polymers at corresponding concentration and with equivalent chain length. The entanglement length for star polymers appears to be somewhat larger compared with linear chains.     

Influence of the molecular architecture on the adsorption onto solid surfaces: comb-like polymers

The processes of adsorption of grafted copolymers onto negatively charged surfaces were studied using a dissipative quartz crystal microbalance (D-QCM) and ellipsometry. The control parameters in the study of the adsorption are the existence or absence on the molecular architecture of grafted polyethyleneglycol (PEG) chains with different lengths and the chemical nature of the main chain, poly(allylamine) (PAH) or poly(L-lysine) (PLL). It was found out that the adsorption kinetics of the polymers showed a complex behavior. The total adsorbed amount depends on the architecture of the polymer chains (length of the PEG chains), on the polymer concentration and on the chemical nature of the main chain. The comparison of the thicknesses of the adsorbed layers obtained from D-QCM and from ellipsometry allowed calculation of the water content of the layers that is intimately related to the grafting length. The analysis of D-QCM results also provides information about the shear modulus of the layers, whose values have been found to be typical of a rubber-like polymer system. It is shown that the adsorption of polymers with a charged backbone is not driven exclusively by the electrostatic interactions, but the entropic contributions as a result of the trapping of water in the layer structure are of fundamental importance.     

Properties of star-branched and linear chains in confined space: a computer simulation study

We studied the properties of simple models of linear and star-branched polymer chains confined in a slit. The polymer chains were built of united atoms and were restricted to a simple cubic lattice. Two macromolecular architectures of the chain linear and star-branched with three branches (of equal length) were studied. The excluded volume was the only potential introduced into the model and thus, the system was athermal. The chains were put between two parallel and impenetrable surfaces. Monte Carlo simulations with a sampling algorithm based on chain’s local changes of conformation were carried out. The differences and similarities in the global size and the structure and of linear and star-branched chains were shown and discussed.     

The Structure of Star-Branched Chains in a Confined Space

Summary. We studied the properties of a simplified model of star-branched polymers confined in a slit formed by two parallel and impenetrable surfaces. The chains were built of identical united atoms (segments) whose positions were restricted to vertices of a simple cubic lattice. The polymer excluded volume and polymer segment-surface contact interactions were also introduced into the model. The properties of the model chains were determined by means of Monte Carlo simulations with a Metropolis-type sampling algorithm based on local changes of chain’s conformation. The structure of star-branched chains was investigated and the influence of the confinement and the temperature on the chain dimensions and structure was studied. It was shown that for chains in the adsorbing slits their sizes do not exhibit a universal behavior contrary to confined athermal polymers. The polymers in narrow slits at higher temperatures still exhibited features of a three-dimensional chain. It was also shown that chains in small slits and at low temperatures were fully adsorbed at one of the surfaces but could also switch the surface rapidly.     

Monte Carlo simulations of the exchange kinetics of polymers adsorbed on a solid surface

The exchange kinetics of polymers adsorbing on a solid surface is extensively studied by dynamic Monte Carlo simulations. A model employed simulates a semidilute polymer solution placed in contact with a solid surface that attracts polymer segments by the adsorption interaction (χ_s). The exchange process of polymer chains, between the solution and the adsorbed polymer layer, is examined under various conditions. The exchange kinetics shows two characteristic regimes with increasing chain length. One is the diffusion‐controlled regime found with a small χ_s , and the other the detachment‐controlled regime with a large χ_s . These two regimes are well described by a kinetic theory. Various dynamic quantities show that the diffusion‐controlled regime is not due to sluggish dynamics near the surface, but rather to bulk diffusion of chains. The diffusion‐controlled regime found in this study is considered to appear at the high temperature limit.     

Adsorption of novel thermosensitive graft-copolymers: Core-shell particles prepared by polyelectrolyte multilayer self-assembly

The adsorption properties of thermosensitive graft-copolymers are investigated with the aim of developing self-assembled multilayers from these copolymers. The copolymers consist of a thermoreversible main chain of poly(N-isopropylacrylamid) and a weak polyelectrolyte, poly(2-vinylpyridine), as grafted side chains. Zeta-potential, single particle light scattering and adsorption isotherms monitor the adsorption of the thermoreversible copolymers to precoated colloidal particles. The results show a smaller surface coverage for a larger density of grafted chains. The surface coverage is discussed in terms of surface charge density in the adsorbed monolayer. Taking into account the monolayer adsorption properties, conditions are developed for the multilayer formation from these copolymers. A low pH provides a sufficient charge density of the grafted chains to achieve a surface charge reversal of the colloids upon adsorption. The charge reversal after each adsorbed layer is monitored by zeta-potential and the increase of the thickness is determined by light scattering. Stable and reproducible multilayers are obtained. The results imply that the conformation of the thermosensitive component in multilayers depends strongly on the grafting density, where the polymer with a higher grafting density adsorbs in a flat conformation while that with a lower grafting density adsorbs with more loops.     

Study of modified silicas by inverse gas chromatography. Influence of chain length on the conformation of n-alcohols grafted on a pyrogenic silica

Summary A fumed silica surface was systematically modified by the grafting of n-alkyl chains with increasing carbon numbers. The samples were characterized by the dispersive component of the surface energy, their specific interaction potential and enthalpies of adsorption of polar, in particular, alcohol probes. It is shown that the variation of the surface properties and adsorption capacities depend on the chain length of the graft. For instance, minimum values are recorded when the surface coverage by methylene groups corresponds either to one or two CH₂ surface layers. This behaviour is related to the mobility of the grafted alkyl chains, mobility which was examined by solid state NMR.     

Dynamics of Adsorbed Star‐Branched Polymer Chains: A Computer Simulation Study

The simple cubic‐lattice model of polymer chains was used to study the dynamic properties of adsorbed, branched polymers. The model star‐branched chains consisted of f = 3 arms of equal lengths. The chain was modeled with excluded volume, that is, in good solvent conditions. The only interaction assumed was a contact potential between polymer segments and an impenetrable surface. This potential was varied to cover both weak and strong adsorption regimes. The classical Metropolis sampling algorithm was used for models of star‐branched polymers in order to calculate the dynamic properties of adsorbed chains. It was shown that long‐time dynamics (diffusion constant) and short‐time dynamics (the longest relaxation time) were different for weak and strong adsorption. The diffusion of weakly adsorbed chains was found to be qualitatively the same as for free nonadsorbed chains, whereas strongly adsorbed chains behaved like two‐dimensional polymers. The time‐dependent properties of structural elements such as tails, loops, and trains were also determined.

The mean lifetimes of tails, loops, and trains versus the bead number for the chain with N = 799 beads for the case of the weak adsorption ε_a = −0.3.     

Motion of a branched polymer chain in confinement: a Monte Carlo study

The aim of the study was a theoretical investigation of the polymer molecules located between two parallel and impenetrable surfaces which were also attractive for polymer segments. The chains were constructed of identical segments and were restricted to knots of a simple cubic lattice. Since the chains were at good solvent conditions the only interactions between the segments of the chain were the excluded volume. The properties of the model chains were determined by means of Monte Carlo simulations with a sampling algorithm based on the chain's local changes of conformation. The differences and similarities in the structure for different adsorption regimes and the size of the slit were shown and discussed. It was observed that at certain conditions the polymer chain was adsorbed at one of the confining surfaces, and then after a certain period of time it detached from this surface and approached the opposite wall; this switch was repeated many times. The influence of the strength of the adsorption, the size of the slit, and the chain's length on the frequency of these jumps were determined. The mechanism of the chain's motion during the switch was also shown.     

Properties of simple models of polymer networks. A Monte Carlo simulation

A model polymer network was constructed from branched chains. Each chain was built on a simple cubic lattice forming a star-branched polymer consisting of f = 3 arms of equal lengths. The fragment of network under consideration consisted of 1, 2 and 3 star polymers with different topology of connections. The only potential used was excluded volume (athermal chains). The properties of the network were determined by the means of computer simulations using the classical Metropolis sampling algorithm (local micromodifications of chain conformation). The behaviour of linear chains of the same molecular weight was also studied as a state of reference. The influence of attaching the next star-branched chain to the network on its static and dynamic properties was studied. The short-time dynamic behaviour of chain fragments was determined and discussed.     

How Does a Polymer Brush Repel Proteins？

The captioned question has been addressed by the steric effect; namely, the adsorption of proteins on a surface grafted with linear polymer chains decreases monotonically as the grafting density increases. However, there is no quantitative and satisfactory explanation why the adsorption starts to increase when the grafting density is sufficiently high and why polyethylene glycol（PEG） still remains as one of the best polymers to repel proteins. After considering each grafted chain as a molecular spring confined inside a ＂tube＂ made of its surrounding grafted chains, we estimated how its free energy depends on the grafting density and chain length, and calculated its thermal energy-agitated chain conformation fluctuation, enabling us to predict an adsorption minimum at a proper grafting density, which agrees well with previous experimental results. We propose that it is such a chain fluctuation that slows down the adsorption kinetically.     

Polymer adsorption on a fractal substrate: numerical study

We study the adsorption of flexible polymer macromolecules on a percolation cluster, formed by a regular two-dimensional disordered lattice at critical concentration p(c) of attractive sites. The percolation cluster is characterized by a fractal dimension d(s) (p(c))=91/49. The conformational properties of polymer chains grafted to such a fractal substrate are studied by means of the pruned-enriched Rosenbluth method. We find estimates for the surface crossover exponent governing the scaling of the adsorption energy in the vicinity of transition point, φ(s)(p(c))=0.425±0.009, and for adsorption transition temperature, T(A)(p(c))=2.64±0.02. As expected, the adsorption is diminished when the fractal dimension of the substrate is smaller than that of a plain Euclidean surface. The universal size and shape characteristics of a typical spatial conformation which attains a polymer chain in the adsorbed state are analyzed as well.     

Influence of electric field intensity, ionic strength, and migration distance on the mobility and diffusion in DNA surface electrophoresis

In order to increase the separation rate of surface electrophoresis while preserving the resolution for large DNA chains, e.g., genomic DNA, the mobility and diffusion of Lambda DNA chains adsorbed on flat silicon substrate under an applied electric field, as a function of migration distance, ionic strength, and field intensity, were studied using laser fluorescence microscope. The mobility was found to follow a power law with the field intensity beyond a certain threshold. The detected DNA peak width was shown to be constant with migration distance, slightly smaller with stronger field intensity, but significantly decreased with higher ionic strength. The molecular dynamics simulation demonstrated that the peak width was strongly related with the conformation of DNA chains adsorbed onto surface. The results also implied that there was no diffusion of DNA during migration on surface. Therefore, the Nernst-Einstein relation is not valid in the surface electrophoresis and the separation rate could be improved without losing resolution by decreasing separation distance, increasing buffer concentration, and field intensity. The results indicate the fast separation of genomic DNA chains by surface electrophoresis is possible.     

Properties of star-branched polymer brushes

A simple model of a polymer brush was constructed. The star polymers with three arms were terminally attached with one arm (the stem) to an impenetrable surface with the other two arms (branches) free. The excluded volume effect was included into the model as the only interaction. Therefore, the system was studied in good solvent conditions. The simulations were carried out by means of the dynamic Monte Carlo method using the local changes of chain conformations to sample efficiently the conformational space. The influence of both the number of chains (the grafting density) and the length of chains on the static properties of the polymer brush was studied. The internal and local structure of a formed polymer layer was determined. It was shown that the size of the stems increased rapidly with the increase of the grafting density, while the size of the branches diminished. The changes of the spatial orientations of the stems and the branches for different grafting densities were shown and discussed.