Electroplex emission from a blend of poly(N-vinylcarbazole) and 2,9-dimethyl-4,7-diphenyl-1, 10-phenanthroline

The PL and EL spectra of poly(N-vinylcarbazole) (PVK) : 2,9-dimethyl-4,7-diphenyl-1, 10-phenanthroline (BCP) (1:1 w/w) film were found completely different. The PL spectrum is a single peak at 415 nm that originates from excitons emission from PVK, and the tail of the spectrum is suggested to be excimer emission from BCP molecules. However, a new emission at 595 nm was found in the EL spectra of devices ITO/PEDOT:PSS(50 nm)/PVK:BCP(1:1)(100 nm)/Al. After aggregate, exciplex and product of electrochemical reaction were ruled out, the new emission was proposed to be electroplex emission that occurred between PVK and BCP molecules. Under high voltage, only electroplex emission can be observed in the EL spectra.     

Suppression of secondary PL emission by indirect photoexcitation

A blend of a newly synthesized polyfluorene(PDHBF) and polyvinylcarbazole(PVK) exhibits a photoluminescence(PL) emission spectrum of PDHBF without an increase in the PL intensity on photoexcitation at 340 nm, the UV-visible absorption maximum of PVK, despite of a substantial spectrum overlap. However, the indirect photoexcitation of the blend suppresses the secondary emission of the PL with the maximum at 520 nm. The chromophores generating the secondary emission are formed when the chromophores are photoexcited above the critical energy level of an excited state. The chromophores formed by the energy transfer have energy lower than the critical energy and fail to form the excimers. A low temperature PL study of the blend in a cryogenic chamber proves that the energy transfer in the system takes place mainly between the excimers of PVK generated by the partially eclipsed dimeric states of two carbazole units and the fluorophores of PDHBF.     

Excimer suppression mechanism in light emitting polymer blends

Alternating copolymer of distyrylenediethylhexyloxyphenylene and phenyltriazine(PPVT) or hydroxyphenyltriazine(PVOT) is synthesized in order to enhance the electron mobility in the light emitting polymers. Photoluminescence(PL) spectrum of PPVT shows excimeric characteristics but PVOT generates excitonic PL emission. A blend of PVOT with polyvinylcarbazole(PVK) enhances the PL intensity of PVOT on photoexcitation of PVK indicating an efficient energy transfer. The excimeric PL emission of PPVT is suppressed on photoexcitation of a blend with PVK at the UV-visible absorption(AB) maximum of PVK, which is an indirect photoexcitation, while the energy transfer from PVK to PPVT is not completed.     

Photoluminescence and Electroluminescence Properties of 2,5-Bis[2,2′-bis(5-phenyl)-1,3,4-oxadiazole] Thiophene(T-OXD)and T-OXD/Poly(9-vinylcarbazole) Blends

The photoluminescence(PL) and the electroluminescence(EL) properties of a novel organic compound, 2,5-bis(2,2′-bis(5-phenyl)-1,3,4-oxadiazole(T-OXD), were studied in chloroform and in a solid thin film. The PL and the EL properties of T-OXD/poly(9-vinylcarbazole)(PVK) blends were also studied, which contained various contents of T-OXD. The PL maximum emission peaks of T-OXD/PVK blends show gradual bathochromtic-shift with the increase of the T-OXD content. The EL spectra of T-OXD/PVK devices are similar to their PL spectra, and all the EL maximum emission peaks show bathochromtic-shift compared with the corresponding PL spectra, which is ascribed to the formation of electroplex. The turn-on voltages for ITO/T-OXD:PVK/Al devices decreased from 13.5 V of the device cotaining 0.1% T-OXD(mass fraction) to 5 V of the device containing 5% T-OXD, which suggests that T-OXD improves the energy level match between T-OXD and PVK and enhances the emission efficiency. The experimental results indicate that T-OXD can be used as a good electron transporting material.     

Synthesis and light-emitting properties of 2-(<Emphasis Type="Italic">N</Emphasis>-phenyl-α-naphthylamino) and 2-dimesitylboron-7-(<Emphasis Type="Italic">N</Emphasis>-phenyl-α-naphthylamino)-9,9-diethylfluorene

A fluorescent organic triarylamine with a symmetric structure, 2,7-bis(N-α-naphthyl-phenylamino)-9,9-diethylfluorene (NPAEF) was synthesized using two methods, modified Ullmann coupling and modified palladium-catalyzed amination. An activated copper and a combination of Pd(OAc)₂/P(t-Bu)₃ and Pd(dba)₂/P(t-Bu)₃ were selected as catalysts to improve yields of reactions. These synthetic procedures were also successfully applied to an asymmetric 2-dimesitylboron-7-(N-phenyl-α-naphthylamino)-9,9-diethylfluorene (BNPEF). Photoluminescent emission peaks in solid film and in diluted solution of NPAEF were both observed at 461 nm, while the main emission peaks of BNPEF appeared at 422 nm in hexane, and at 480 nm in methanol. The double emission peaks of BNPEF in hexane reflected fine structure in the vibrational state. With an increasing polarity of solvent, the main PL emission peaks were red-shifted and vibrational fine structure disappeared. Additionally, energy levels of NPAEF were investigated and an electroluminescence (EL) device of ITO/PVK:NPAEF/Al was fabricated, which showed a turn-on voltage of 9 V and peaked at 462 nm. The EL spectrum was in good agreement with PL spectrum, which indicated that they were from the same emitting center in the device. Supported by the National Natural Science Foundation of China (Grant Nos. 20674004, 60776039, 60825407 & 10434030), Beijing Commission of Education (Grant No. KM200710015009), Beijing Sustentation Fund for Elitist (Grant No. 20041D0500410), Laboratory of Printing and Packaging Material and Technology and Beijing Area Major Laboratory Project (Grant No. KF200811) and BJTU Fund (Grant No. 2006XM043).     

Covalent Modification of MoS2 with Poly(N‐vinylcarbazole) for Solid‐State Broadband Optical Limiters

New soluble MoS₂ nanosheets covalently functionalized with poly(N‐vinylcarbazole) (MoS₂–PVK) were in situ synthesized for the first time. In contrast to MoS₂ and MoS₂/PVK blends, both the solution of MoS₂–PVK in DMF and MoS₂–PVK/poly(methyl methacrylate) (PMMA) film show superior nonlinear optical and optical limiting responses. The MoS₂–PVK/PMMA film shows the largest nonlinear coefficients (β_eff) of about 917 cm GW^?1 at λ=532 nm (cf. 100.69 cm GW^?1 for MoS₂/PMMA and 125.12 cm GW^?1 for MoS₂/PVK/PMMA) and about 461 cm GW^?1 at λ=1064 nm (cf. ?48.92 cm GW^?1 for MoS₂/PMMA and 147.56 cm GW^?1 for MoS₂/PVK/PMMA). A larger optical limiting effect, with thresholds of about 0.3 GW cm^?2 at λ=532 nm and about 0.5 GW cm^?2 at λ=1064 nm, was also achieved from the MoS₂–PVK/PMMA film. These values are among the highest reported for MoS₂‐based nonlinear optical materials. These results show that covalent functionalization of MoS₂ with polymers is an effective way to improve nonlinear optical responses for efficient optical limiting devices.     

Synthesis and characterization of a soluble blue light emitting alternating copolymer

An alternating copolymer with monomer units of fluorene and phenylenedivinylene was synthesized by reaction between n-hexyl fluorene phosphonium salt and isophthalic aldehyde based on the Wittig reaction. The polymer solution in chloroform was made into a film with a very fine surface by spin-casting on indium-tin oxide (ITO) coated glass to fabricate a light emitting diode (LED) with an aluminum negative electrode. The optical absorption spectrum of the solid film shows a peak at 370 ran while the PL spectrum has the main peak at 560 nm with a secondary peak at 440 nm and the EL spectrum has a single peak at 560 nm showing the Stokes shift of 190 nm. The peak in the PL spectrum shifts to 420 nm with a vibronic structure at 440 nm on either dilution by chloroform or blending with polyvinylcarbazole (PVK). The emissive polymer bulk seemed to generate sites for excimers and molecular aggregates which were diminished on the dilution or blending. The peak in the EL spectrum also shifts to 440 nm on blending of 20% of the copolymer with PVK. Further dilution to 10% of the copolymer shifts the EL peak to 420 nm with the onset potential of 15 V and the highest quantum efficiency of 0.01% in this series. The concentrated channels were developed in the blends with severe phase separation to show a lower onset potential but poor quantum efficiency.     

TOF-GISANS investigation of polymer infiltration in mesoporous TiO2 films for photovoltaic applications

The structure of porous TiO₂ films and TiO₂:poly(N-vinylcarbazole) (PVK) composite films is investigated with time-of-flight grazing incidence small-angle neutron scattering (TOF-GISANS). The TiO₂ films have been prepared by application of a sol–gel process with a diblock copolymer as structure directing agent, and the conductive polymer PVK is infiltrated in the porous network by spin coating and solution casting. The films show a hierarchical pore structure with mesopores 52 nm in size and additional large macropores with a diameter of about 180 nm. By matching the scattering contrast of the TiO₂ with the polymer information about the penetration of the polymer in the pores is determined. Whereas in the PVK film prepared by solution casting the pores are filled to a high degree; in the spin coated film, PVK wets only the TiO₂ pore walls and forms a solid overlying layer. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1628–1635, 2010     

A π‐stacked and conjugated hybrid based on poly(N‐vinylcarbazole) postfunctionalized with terfluorene for stable deep‐blue hole‐transporting materials

The combination of π‐stacked with π‐conjugated building blocks offers an essential strategy to construct multifunctional organic semiconductors (MOSs) with the unique optoelectrical properties. Covalent hybrids can efficiently avoid the intrinsic phase‐separation defects in corresponding blend system. In this contribution, poly(vinylcarbazole) tethered with terfluorene, PVK‐TF, as a double‐channeled π‐stacked and π‐conjugated hybrid (SCH), has been constructed via Friedal‐Crafts click postmodification (FCCP). The chemical structure and optoelectrical property were determined by GPC, UV–vis, PL, TGA, DSC, and CV. Its PL spectra in the annealing thin film at N₂ atmosphere without low‐energy emission bands centered at the 530 nm indicates that no π‐stacks between carbazole and TF or among TFs dominate the whole condensed phase, which is in agreement with the intrachain T‐shaped π‐pitched motifs in molecular modeling simulation due to steric hindrance effect in complicated diarylfluorenes (CDAFs). A supporting prototype stable deep‐blue PLED was successfully obtained with an Internationale de l'Eclairage (CIE) coordinates of (0.20, 0.10) and a width at half maximum (FWHM) of about 60 nm at high current density of 100 mA/cm² (35 V). Deep‐blue PVK‐TF is a promising MOS for hole‐transporting and host materials. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5221–5229, 2009     

Poly(N‐vinylcarbazole) chemically modified graphene oxide

A new soluble donor‐acceptor type poly(N‐vinylcarbazole)‐covalently functionalized graphene oxide (GO‐PVK) has been synthesized by reaction of DDAT (S‐1‐dodecyl‐S′‐(α,α′‐dimethyl‐α″‐aceticacid)trithiocarbonate)‐PVK with GO‐toluene‐2,4‐diisocynate. The incorporation of sufficient amount of PVK chains makes the modified GO nanosheets readily dispersible in organic solvents. The resulting material exhibits an enhanced solubility of 10 mg/mL in organic solvents. Covalent grafting of PVK onto the edge and surface of GO nanosheets did not change the carbazole absorption in the ultraviolet region, but substantially reduced the absorption intensity of GO in the visible region. The intensity of the emission band of GO‐PVK at 437 nm was a little bit quenched when compared with that of DDAT‐PVK, suggesting intramolecular quenching from PVK to GO. Such intramolecular quenching process may involve energy or electron transfer between the excited singlet states of the PVK moiety and the GO moiety. The HOMO/LUMO values and the energy bandgap of GO‐PVK experimentally estimated by the onset of the redox potentials are ?5.60, ?3.58, and 2.02 eV, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2642–2649, 2010     

给体-受体-给体窄带隙染料掺杂聚芴发光二极管

合成了一系列给体-受体-给体型窄带隙荧光分子, 并将其作为掺杂剂与主体(Host)宽带隙聚芴共混制备发光二极管. 荧光分子为4,7-二呋喃-苯并噻二唑(O-S)、4,7-二噻吩-苯并噻二唑(S-S)、4,7-二(N-甲基吡咯)-苯并噻二唑(N-S)、4,7-二硒吩-苯并噻二唑(Se-S)和4,7-二(N-甲基吡咯)-苯并硒二唑(N-Se). 溶液中荧光分子的紫外-可见吸收峰位于447~472 nm, 荧光发射峰位于563~637 nm. 该系列荧光分子掺杂聚芴(PFO)发光器件的电致发光峰位于580~633 nm. 当器件结构为ITO/PEDOT/PVK/PFO+N-Se/Ba/Al时, 最大外量子效率为1.28%, 电流效率1.31 cd/A.     

PVK与新型D-π-A分子掺杂体系的能量转移及发光性质

通过对PVK与4种新型D-π-A分子(分别简写为CKD, TKD, PKD, NKD)掺杂体系的吸收光谱、激发光谱和光致发光光谱的研究, 分析了掺杂体系的光致发光特性和能量转移现象. 制备了结构为ITO/PEDOT/PVK∶D-π-A ω/Alq3/Al的电致发光器件, 研究了掺杂体系的电致发光性能. 研究结果表明, 通过改变D-π-A分子中不同给电子能力的电子给体, 可以调控其带隙, 进而实现对D-π-A分子发光峰位的调节; 给电子基团空间立构效应越高, 其荧光量子效率越高. 在掺杂体系的光致发光和电致发光中, PVK与D-π-A分子之间都发生了有效的能量转移, 通过调节PVK与D-π-A分子的比例, 可以调节掺杂体系的发光性能. 当TKD在PVK中的掺杂质量分数为6％时, 电致发光器件发光亮度为729.1 cd/m2时, 发光效率达到1.75 cd/A.     

The synthesis and characterization of C60 chemically modified poly(N-vinylcarbazole)

Addition of C₆₀ moiety, a powerful electron acceptor to poly(N-vinylcarbazole) (PVK) by chemical reaction modifies considerably the physical and chemical properties of PVK. The characterization techniques employed are UV-visible, IR, DSC, TGA, ESR, ¹³C-NMR spectroscopy, scanning electron microscopy, XRD, and cyclic voltammetry. The fullerenated PVK, which has a visibly earthy yellow cast when compared with the unreacted polymer, has a new structure in the UV-vis absorption spectrum with the active range extending from about 280 to 870 nm, its apparent temperature sensitivity is intriguing, and an unusual temperature dependence for the ESR spectrum is observed. Considerable difference of electronic structure between pure PVK and C₆₀-PVK copolymer is indicated. The thermal stability and oxidation-reduction activation of pure PVK are enhanced by C₆₀-chemical modification. © 1996 John Wiley & Sons, Inc.     

Photoluminescent properties of poly(p‐phenylene vinylene thiophene‐co‐siloxane)

A new p‐phenylene–vinylene–thiophene‐based siloxane block copolymer has been synthesized. The copolymer consists of alternating rigid and flexible blocks. The rigid blocks are composed of phenylene–vinylene–thiophene‐based units, and the flexible blocks are derived from 1,3‐dialkyldisiloxane units. The former component acts as the chromophore, and allows fine tuning of band gap for blue‐light emission, while the latter imparts good solubility of the copolymer in organic solvents, and thus, should enhance processibility of the resulting copolymer. The thermal properties of the copolymer have been characterized by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The photoluminescence (PL) of the copolymer in solution and in cast film has been studied. The effects of concentration on the PL intensity of the new copolymer in polymer blends with poly(methyl methacrylate) (PMMA) and poly(vinyl carbazole) (PVK) have also been described. Efficient energy transfer from PVK to the new block copolymer in the blended film was observed. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1450–1456, 2000     

Multiwalled carbon nanotubes covalently functionalized with poly(N‐vinylcarbazole) via RAFT polymerization: Synthesis and nonliner optical properties

The poly(N‐vinylcarbazole)‐grafted MWNTs (MWNT‐PVK) hybrid materials were synthesized in the presence of S‐1‐Dodecyl‐S′‐(α, α′‐dimethyl‐α″‐acetic acid) trithiocarbonate (DDAT)‐covalently functionalized multiwalled carbon nanotubes (MWNT‐DDAT) as reversible addition–fragmentation chain transfer (RAFT) agent. Incorporation of the PVK moieties onto the MWNTs surface can considerably improve the solubility and processability of MWNTs. For all MWNT‐PVK hybrid materials, they are soluble in some common organic solvents such as toluene, THF, chloroform, DMF and others. In contrast to the UV/Vis spectrum of DDAT‐PVK, which was synthesized by use of DDAT as RAFT agent under the same synthetic condition, in the visible region, the absorption spectrum of MWNT‐PVK exhibited a typical electronic absorption characteristics of solubilized carbon nanotubes, in which the absorbance decreases gradually in the range of 350–600 nm. At the same level of linear transmission the MWNT‐PVK with 79.2% PVK moieties in the material structure possesses best optical limiting performance in comparison with the other MWNT‐PVK composites, MWNTs and C₆₀. The significant NLO responses manifest the MWNT‐PVK materials suitable candidate for viable optical limiting devices. Light scattering, originating from the thermal‐induced microplasmas and/or microbubbles, is responsible for the optical limiting. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3161–3168, 2010     

Synthesis and electroluminescent properties of naphthalimide derivatives

Naphthalimide derivatives, N-ethyl-4-acetylamino-l ,8-naphthalimide (EAAN) and polymer with N-propyl-4-acetylamino-l,8-naphthalimide (PAAN) side-chain (P-PAAN) were successfully synthesized. Electroluminescent devices of ITO/PVK(120nm)/EAAN(50nm)/Al(150nm) (Ⅰ) and ITO/PVK P-PAAN( 10:1) (50nm)/Al(150nm) (Ⅱ) constructed with EAAN and P-PAAN as the emitting layer were investigated, whereas the single-layer devices of ITO/EAAN or P-PAAN(50nm)/Al(l50nm) (Ⅲ) were not observed to have any e-mission light. The emission results revealed that the exciton recombination formed by positive and negative charge carriers injected from electrodes of devices Ⅰ and Ⅱ was much more balanced than that of devices Ⅲ, which implied that naphthalimide derivatives are a new type of electron-transporting materials with high performance. The electron-transporting properties of naphthalimide derivatives were also elucidated by investigation of the electroluminescent behaviors from both devices of ITO/PPV (80nm)/Al and ITO/P     

Green exciplex emission from a bilayer light-emitting diode containing a rare earth ternary complex

A bilayer organic light-emitting diode using a blue-fluorescent yttrium complex, tris(1-phenyl-3-methyl-4-isobutyryl-5-pyrazolone)-(2,2^′-dipyridyl) yttrium [Y(PMIP)₃(Bipy)] (YPB) as an emitting material and poly(N-vinylcarbazole) (PVK) as a hole-transporting material emitted bright green light instead of blue light. It was attributed to the exciplex formation at the solid interface between the PVK and YPB layers, which was demonstrated by the measurement of the absorption, photoluminescence (PL) and photoluminescence excitation (PLE) spectra of the mixture of PVK and YPB (molar ratio 1:1). The device exhibited a maximum luminance of 177 cd/m² and a peak power efficiency of 0.02 lm/W.     

新型铱配合物的合成及电致发光性质研究

合成了一种新型橙红色磷光材料铱的配合物(npp)₂Ir(acac)(npp=2-(1-萘基)-4-苯基吡啶，acac=乙酰丙酮)，通过 ¹H NMR、MS、元素分析对其结构进行了表征。以铱配合物(npp)₂Ir(acac)作为发光体，制备了结构为ITO/Ir(5%)：PVK(60 nm)/F-TBB(15 nm)/Alq₃(15 nm)/LiF(1 nm)/Al(150 nm)的电致发光器件，研究了其电致发光性质。结果表明器件的最大发射波长在599 nm，最大发光亮度为3 841 cd·m^-2，最大电流效率达3.9 cd·A^-1。     

Triplet level-dependent photoluminescence and photoconduction properties of π-conjugated polymer thin films doped by iridium complexes

Triplet energy level-dependent decay pathways of excitons populated on iridium (Ir) complexes within π-conjugated polymeric matrices were studied by means of photoluminescence (PL) and photoconduction action spectroscopy. We chose a set of matrices, poly(9-vinylcarbazole) (PVK), poly[9,9-bis(2-ethylhexyl)fluorene-2,7-diyl] (PF2/6), poly [2-(5′-cyano-5′-methyl-hexyloxy)-1,4-phenylene] (CNPPP), and poly [2-(5′-cyano-5′-methyl-hexyloxy)-1,4-phenylene-co-pridine] (CNPPP-py10 and CNPPP-Py20), having triplet energy levels ranging from 2.2 up to 3.0 eV. As Ir-complex dopants, we selected three phosphorescent emitters, iridium(III)bis(2-(2′-benzothienyl) pyridinato-N-acetylacetonate) (Ir(btp)₂acac), iridium(III)fac-tris(2-phenylpyridine) (Ir(ppy)₃), and iridium(III)bis[(4,6-fluorophenyl)-pyridinato-N,C^2′]picolinate (FIrpic), having triplet energy levels of 2.1, 2.5, and 2.7 eV, respectively. It was found that the triplet emission from the dopants, being populated via energy transfer from the matrices, was strongly dependent on the matching of triplet energy levels between matrix polymers and Ir-complexes. Photocurrent action spectra confirm effective exciton confinement at the dopants sites in the case of PVK matrix systems.     

Mass spectrometric investigation of the aggregation and coalescence of fullerenes in C60-modified poly(N-vinylcarbazole) by UV-laser ablation

The phenomena of aggregation and coalescence of fullerenes in the UV-laser ablation time-of-flight mass spectrometric investigation of C₆₀-modified poly(N-vinylcarbazole) both in the positive and in the negative ion channels have been observed. The results indicate that in C₆₀ chemically modified PVK (C₆₀–PVK) copolymer the nascent fullerene fragments ruptured from main chain can easily coalesce into large fullerenes through collisions, whereas in the C₆₀-doped PVK the aggregation and coalescence of C₆₀ were relative weak due to nonbounding action and incomplete charge transfer behavior between C₆₀ and PVK. Furthermore, the photoinduced electron transfer behavior between C₆₀ and carbazole units in the C₆₀ chemically modified poly(N-vinylcarbazole) in benzonitrile by laser flash photolysis at 355 nm has also been investigated. Efficiency of the anion radical of C₆₀ in copolymer at 1080 nm is higher than that of the C₆₀-doped poly(N-vinylcarbazole) polymers. The formation of a C₆₀ radical anion may be ascribed to photoinduced electron transfer between C₆₀ pendanted on the main chain backbone and the inter-, and intrachain carbazole units in the copolymer. © 1997 John Wiley & Sons, Inc. 35 : 1185–1190, 1997