The complexes of macromolecules and metal nanoparticles: pseudo-template synthesis and behavior

Metal sols composed of metal nanoparticles (1 - 10 nm in diameter) protected with polymer molecules may be regarded as dispersions of polymer-metal complexes formed due to cooperative non-covalent (e.g., hydrophobic, coulombic) interaction of polymer chains with the surface of metal nanoparticles. The sols are commonly prepared by reducing of metal ions in solutions of appropriate polymers. The interactions between macromolecules and nanoparticles are reversible. In the case of long polymer chains and minute particles, the equilibrium constant of the reaction exponentially depends on the surface area of the particle. The probability of mutual “recognition” (complex formation) of growing particle and a macromolecule rapidly increases from practically zero to practically unity in narrow interval of the particle's diameters. The recognition is followed with the shadowing of the particles and the stop of their growths. Such kind of processes was termed “pseudo-template”. In frame of the concept of pseudo-template processes can be estimated: (1) the conditions at which sol particles of desirable size can be prepared, (2) the influence of temperature, polymer concentration, nanoparticles size, and other conditions on the stability of polymer - particle complex having been prepared, and (3) the conditions at which stable sol does not exist and can not be prepared at all. The interactions between metal nanoparticles and macromolecules are highly selective regard to the structure of polymer chains. The property can be effectively used for the control the size characteristics of metal nanoparticles (in course of their formation) and the stability of metal sols. The selectivity provides high conversions in catalytic chemical modification reactions in which a macromolecule is the substrate and a component of the catalyst in the same time. As an example, the hydrolysis of lactame groups in monomer unites of poly(N-vinyl pyrrolidone) catalyzed with copper sols is discussed.     

Integral equation theory of randomly coupled multiblock copolymer melts: effect of block size on the phase behavior

The phase behavior of randomly coupled multiblock copolymer melts is studied using the polymer reference interaction site model integral equation theory. The molecules are modeled as flexible chains with random sequences of two types of blocks, each of which consists of the same number (R) of monomer beads. In the random copolymer (R=1) limit the theory predicts macrophase separation as the temperature is decreased for all values of the monomer correlation length lambda. For R>2, however, the theory predicts a microphase separation for values of lambda less than some critical value which increases as the block size increases.     

Template-directed adsorption of block copolymers on alkanethiol-patterned gold surfaces

Functionalized alkanethiols have been self-assembled on gold to modify the wetting properties of the surface and promote or hinder the adsorption of block copolymers containing both hydrophobic and hydrophilic blocks. X-ray photoelectron spectroscopy (XPS) studies of spin-coated polyethylene-block-poly(ethylene oxide) (PE-b-PEO) copolymers on 16-mercaptohexadecanoic acid (MHDA)-, octadecanethiol (ODT)-, and 1H,1H,2H,2H-perfluorodecanethiol (PFDT)-covered surfaces have been performed. In the case of an 80 wt % PEO block copolymer, spin-coating on a gold surface precovered with MHDA results in a polymer film thick enough to completely attenuate Au 4f photoelectrons; spin-coating on the more hydrophobic ODT and PFDT monolayers leads to significantly thinner polymer films and incomplete attenuation of the gold photoelectrons. The opposite results are observed when a 20 wt % PEO block copolymer is used. Angle-resolved XPS studies of the 80 wt % PEO block copolymer spin-coated onto an MHDA-covered surface indicate that the PE blocks of the polymer segregate to the near-surface region, oriented away from the hydrophilic carboxylic acid tails of the monolayers; the surface concentration of PE is further enhanced by annealing at 90 degrees C. Microcontact printing and dip-pen nanolithography have been used to pattern gold surfaces with MHDA, and the surfaces have been backfilled with ODT or PFDT, such that the unpatterned regions of the surface are covered with hydrophobic monolayers. In the case of backfilling with PFDT, spin-coating the 80 wt % PEO copolymer onto these patterned surfaces and subsequent annealing results in the block copolymer preferentially adsorbing on the MHDA-covered regions and forming well-defined patterns that mimic the MHDA pattern, as determined by scanning electron microscopy and atomic force microscopy. Significantly worse patterning, characterized by micron-sized polymer droplets, results when the surface is backfilled with ODT instead of PFDT. Using PFDT and MHDA, polymer features having widths as small as 500 nm have been formed. These studies demonstrate a novel method to pattern block copolymers with nanoscale resolution.     

嵌段序列对聚合物囊泡形成过程影响的Monte Carlo模拟

采用Monte Carlo模拟方法研究了具有相同链长和组分比的不同嵌段序列的AB两嵌段共聚物与ABA三嵌段共聚物在选择性溶剂中形成囊泡的动力学过程. 模拟结果表明, AB两嵌段共聚物囊泡的形成与ABA三嵌段共聚物囊泡的形成的动力学过程不同. 在慢速退火条件下, ABA三嵌段共聚物囊泡是通过亲水链段向胶束的表面和中心扩散而形成的, 而AB两嵌段共聚物囊泡则由片层弯曲闭合而形成. 相对而言, 退火速度对AB两嵌段共聚物囊泡形成的动力学过程没有显著影响, 其改变仅影响亲水链段与疏水链段发生相分离的难易程度. 当退火速度较快时, 亲水链段和疏水链段发生相分离的速度较快且相分离发生在囊泡形成之前; 而当退火速度较慢时亲水链段和疏水链段之间的相分离在囊泡形成之后仍在进行.     

Behavior of a Thermosensitive Star-Shaped Polymer with Polyethyloxazoline-<Emphasis Type="Italic">block</Emphasis>-Polyisopropyloxazoline Copolymer Arms

The aqueous solutions of the star-shaped eight-arm polymer in which arms consist of the block copolymer of poly(2-ethyl-2-oxazoline) and poly(2-isopropyl-2-oxazoline) and a more hydrophilic poly(2- ethyl-2-oxazoline) is attached to the calix[8]arene core are studied by light scattering and turbidimetry. For the sake of comparison, the linear block copolymer modeling arms of the star-shaped polymer is examined. The temperature and concentration dependences of light scattering intensity and optical transmission, the hydrodynamic radii of particles occurring in solutions, and their fraction in solution are determined. At room temperature, solutions of the linear copolymer are molecularly dispersed because of a high hydrophilicity of blocks and aggregates are formed in solutions of the star-shaped polymer as a result of interaction between hydrophobic calix[8]arene cores. As the temperature grows, the dehydration of poly(2-isopropyl-2-oxazoline) units initially occurs and entails both the compaction and aggregation of star-shaped molecules. At higher temperatures, the dehydration of poly(2-ethyl-2-oxazoline) leading to phase separation begins. The temperature of phase separation grows upon dilution. A high intramolecular density of the star-shaped polymer is responsible for a marked deceleration of self-organization processes. This effect is especially pronounced in the vicinity of the phase-separation temperature.     

Surface Reconstruction by a Coassembly Approach

Materials with switchable surfaces, capable of changing surface properties under external stimuli, are playing a pivotal role in many applications, such as tissue engineering, biosensors, and drug/protein delivery. In this research silica particles with patterned and switchable surfaces are fabricated. Surface micelles on silica particles are formed by coassembly of polymer brushes and “free” block copolymer chains in a selective solvent. The cores of the surface micelles are crosslinked by anthracene photodimerization. After quaternization of the coronae, amphiphilic surface micelles are prepared. The surface micelles are able to rearrange in different media. After treatment with an organic solvent, the surfaces of silica particles are occupied by hydrophobic polymer components; in aqueous solution, the positively charged polymer chains are on the surfaces. The switching of the surface micelles results in changes in surface composition and wetting behaviors.     

Multicompartment micelles from silicone-based triphilic block copolymers

An amphiphilic linear ternary block copolymer was synthesised in three consecutive steps via reversible addition–fragmentation chain transfer polymerisation. Oligo(ethylene glycol) monomethyl ether acrylate was engaged as a hydrophilic building block, while benzyl acrylate and 3-tris(trimethylsiloxy)silyl propyl acrylate served as hydrophobic building blocks. The resulting “triphilic” copolymer consists thus of a hydrophilic (A) and two mutually incompatible “soft” hydrophobic blocks, namely, a lipophilic (B) and a silicone-based (C) block, with all blocks having glass transition temperatures well below 0 °C. The triphilic copolymer self-assembles into spherical multicompartment micellar aggregates in aqueous solution, where the two hydrophobic blocks undergo local phase separation into various ultrastructures as evidenced by cryogenic transmission electron microscopy. Thus, a silicone-based polymer block can replace the hitherto typically employed fluorocarbon-based hydrophobic blocks in triphilic block copolymers for inducing multicompartmentalisation.     

Compaction of TiO2 suspension utilizing hydrophilic/hydrophobic transition of cationic thermosensitive polymers

Compaction of TiO2 suspended particles utilizing the hydrophilic/hydrophobic transition of a cationic thermosensitive copolymer of N-isopropylacrylamide (NIPAM) and N-dimethylaminopropylacrylamide (DMAPAA) was examined. The surface of suspended TiO2 particles were sufficiently covered with the adsorbed polymer molecules at room temperature, and the suspension was subsequently heated above the transition temperature of the polymer. The thrusting motion of a plunger was used in order to provide an adequate mechanical force to compact the TiO2 suspended particles. The transition temperature was dependent on the DMAPAA content in the copolymer and the pH of the suspension. The transition temperature increased with increasing DMAPAA content and decreased with increasing pH. While suspended TiO2 particles were not compacted with poly(NIPAM), hard compacted sludge was readily obtained for cationic copolymer even if the content of DMAPAA groups was as low as 0.23 mol%. Furthermore, residual polymer molecules in the supernatant were not detected even if the polymer dosage was increased. These findings were attributed to the hydrophobic interaction of thermosensitive copolymer molecules adsorbed on TiO2 particles.     

Formation of block copolymer-protected nanoparticles via reactive impingement mixing

Reactive impingement mixing was employed to produce polymer-protected nanoparticles. Amphiphilic block copolymer was formed in situ by reactive coupling of hydrophobic and hydrophilic blocks. Simultaneously, a hydrophobic compound and the copolymer coprecipitated to form nanoparticles in the range of 100 nm. Specifically, beta-carotene was stabilized by the amphiphilic diblock copolymer, formed from the reaction of an amino-terminated hydrophilic block, poly(ethylene glycol) (PEG-NH2), with an acid chloride-terminated hydrophobic block, either poly(epsilon-caprolactone) (PCL-COCl) or polystyrene (PS-COCl). Spherical particles were observed by scanning and cryogenic transmission electron microscopy. Process conditions, including feed concentration of beta-carotene and feed concentrations of polymeric stabilizers, had little or no effect on average particle sizes over the range studied. Further, for Reynolds numbers greater than 500 the feed flow rates also had no effect. The effect of glass transition temperature (Tg) of the hydrophobic polymer on morphology and particle formation mechanism is discussed.     

Poly(N-isopropylacrylamide)-grafted dual stimuli-responsive filter paper for protein separation

Thermal and salt dual stimuli-responsive filter-paper-based membranes were prepared by UV-induced grafting of NIPAM-based polymers on paper surface. The grafting ratio could be controlled by monomer concentration during grafting polymerization. The results from pressure drop measurement of the mobile phase flowed cross the membrane demonstrate that an appropriate grafting ratio would be 8%-10%. Protein adsorption on the membrane through hydrophobic interaction could be promoted by increasing temperature and lyotropic salt concentration. The effect of grafted polymer structure on protein binding performance was studied. Filter paper grafted with NIPAM-based branched copolymer consisting of hydrophobic monomer moieties shows ten times higher protein binding capacity than that of the original filter paper. The separation of plasma proteins using the dual stimuli-responsive membrane was examined to demonstrate feasible application for hydrophobic interaction chromatographic separation of proteins.     

Sorption of anionic amphiphilic block copolymers by a network polycation

The interaction of amphiphilic block copolymers comprising an anionic block (polyacrylate or polymethacrylate) and a hydrophobic block (polystyrene, poly(butyl acrylate) or polyisobutylene) with lightly crosslinked poly(N,N-diallyl-N,N-dimethylammonium chloride) is studied for the first time. It is shown that the cationic hydrogel can sorb anionic amphiphilic block copolymers via electrostatic interaction with the corona of block copolymer micelles. The rate of sorption of block copolymer polyelectrolytes is significantly lower than the rate of sorption of linear polyions and is controlled by the lengths of the hydrophilic and hydrophobic blocks and the flexibility of the latter blocks. The sorption of amphiphilic block copolymers is accompanied by their self-assembly in the polycomplex gel and formation of a continuous hydrophobic layer impermeable to water and the low-molecular-mass salt dissolved in it.     

Semicontinuous seeded emulsion copolymerization of vinyl acetate and methyl acrylate

The semicontinuous seeded emulsion copolymerization of vinyl acetate and methyl acrylate was investigated. The effect of type of process (starved process versus semi-starved process), type of feed (neat monomer addition versus monomer emulsion addition), amount of seed initially charged in the reactor, and feed rate on the time evolution of the overall conversion, copolymer composition, and polymer particle size was analyzed. It was found that, in the case of the starved process, both monomers, but mainly vinyl acetate, accumulated in the reactor. The preferential accumulation of vinyle acetate resulted in a drift of the copolymer composition. Both monomers accumulation and copolymer composition drift were reduced by increasing the amount of seed initially charged in the reactor and by decreasing the feed rate. For the semi-starved process, it was found that a vinyl aceatate rich copolymer was formed when a low methyl acrylate feed was used, whereas a methyl acrylate rich copolymer was obtained at high methyl acrylate feed rates. For both starved process and semi-starved process, the total number of polymer particles, after an initial increase, reached a plateau value which was the same in all of the experiments carried out. These results were analyzed by means of a mathematical model developed for this system.     

Micelle density regulated by a reversible switch of protein secondary structure

Protein secondary structures may exhibit reversible transitions that occur in an abrupt and controllable manner. In this report, we demonstrate that such transitions may be utilized in the design of a "smart" protein micellar system, in which a stimulus-induced change in protein structure triggers a rapid change in micelle compacticity and size. Specifically, recombinant DNA methods were used to prepare a protein triblock copolymer containing a central hydrophilic block and two hydrophobic end blocks derived from elastin-mimetic peptide sequences. Below the copolymer inverse transition temperature (T(t)), dilute solutions of this amphiphilic protein formed monodispersed micelles in a narrow range of R(H) of approximately 100 nm. When the the temperature was raised above T(t), an abrupt increase in micelle internal density was observed with a concomitant reduction in micelle size. This reversible change in micelle compacticity was triggered by helix-to-sheet protein folding transition. Significantly, these protein polymer-based micelles, which are rapidly responsive to environmental stimuli, establish a new mechanism for the design of controlled drug delivery vehicles.     

新型疏水缔合丙烯酰胺/2-苯氧乙基丙烯酸酯共聚物的合成与性质

采用胶束共聚方法合成了一种新型的疏水缔合共聚物 ,它由丙烯酰胺 (AM)和少量的 2 苯氧乙基丙烯酸酯 (POEA) (<1 0mol% )组成 ,具有良好的水溶性 .当溶液浓度超过一定值c 后 ,由于分子间的疏水缔合 ,产生很大的增粘作用 .研究了不同聚合条件下包括单体浓度、投料比和SMR值对聚合物的结构和性能的影响 .实验结果表明 ,聚合物的粘度性质和缔合行为取决于其分子量的大小、疏水单体含量及其嵌段的长度和分布 .     

全氟甲基乙烯基醚和其它含氟单体乳液共聚合的竞聚率测定

分别通过气相色谱法测定了全氟甲基乙烯基醚 (PMVE)与偏氟乙烯 (VDF)以及PMVE与四氟乙烯(TFE)二元乳液共聚反应中的气相单体组成和共聚物组成 ,然后用非线性回归法 (RREVM )计算得TFE PMVE及VDF PMVE乳液共聚合反应的表观竞聚率分别为γTFE =3 89和γPMVE =0 0 5以及γVDF =1 0 6和γPMVE =0 11.结合已经测定的TFE VDF二元乳液共聚的表观竞聚率 ,计算了由VDF TFE PMVE三元乳液共聚合反应合成的共聚物组成 ,后者与由1 9F NMR实测的共聚物组成吻合     

Surface attachment of nanoparticles using oligonucleotides

Colloidal polymer particles are widely used in a variety of applications ranging from chromatography to surface modified bioreactors in protein arrays. In the present study, surface attachment of polystyrene particles to a polystyrene substrate has been performed using oligonucleotide hybridization. Thiolated complementary oligomers of cytosine and guanine have been covalently coupled to a pyridyl disulphide (PDS) modified polyethyleneglycol tether, forming part of a triblock copolymer which is adsorbed to the polystyrene surfaces via hydrophobic polypropylene oxide center blocks. The ability to withstand shear forces was studied using a laminar flow cell and the uptake of oligomers on the particles was quantified using two complementary techniques: UV-spectroscopy and sedimentation field flow fractionation. The possibility to tether particles in a flow cell suitable for practical use in e.g. a FIA-system is demonstrated.     

Molecular-weight distribution and structural transformation in water-soluble complexes of poly(acrylic acid) and bovine serum albumin

Interaction of polyacrylic acid (PAA) with bovine serum albumin (BSA) at different pH values and in a wide range of mixing molar ratios, γ = n_BSA/n_PAA, of components was investigated by size-exclusion high performance liquid chromatography with on-line refractive index, UV, light scattering and viscometer detectors. The results revealed the formation of stable water-soluble polymer-protein complexes at pH 5.0. For the soluble complexes thus formed, the number of the bound BSA molecules with one PAA molecule was expressed by a Langmuir-type equation as a function of the amount of excess BSA existing free in the solution. At saturation, one BSA molecule is bound to about 48 acrylic acid residues.The γ-dependencies of molecular properties and structural parameters (molecular weights, molecular-weight distribution, radius of gyration, and the Mark-Houwink equation constants) of aqueous solutions of polycomplex particles have been studied. It has been concluded from these results that the complex molecule is formed by the molecular association-dissociation processes between particles depending on protein molecules in mixtures. We assume that side-by-side association of BSA-PAA complex particles took place at γ ? 5. At γ > 5, dissociation of the aggregates occurred by the including certain protein molecules into composition and by the compactization of polycomplex particles.     

Self-assembled supramolecular gels of reverse poloxamers and cyclodextrins

A series of supramolecular aggregates were prepared using a poly(propylene oxide)-poly(ethylene oxide)-poly(propylene oxide) (PPO-PEO-PPO) block copolymer and β- or α-cyclodextrins (CD). The combination of β-CD and the copolymer yields inclusion complexes (IC) with polypseudorotaxane structures. These are formed by complexation of the PPO blocks with β-CD molecules producing a powder precipitate with a certain crystallinity degree that can be evaluated by X-ray diffraction (XRD). In contrast, when combining α-CD with the block copolymer, the observed effect is an increase in the viscosity of the mixtures yielding fluid gels. Two cooperative effects come into play: the complexation of PEO blocks with α-CD and the hydrophobic interactions between PPO blocks in aqueous media. These two combined interactions lead to the formation of a macromolecular network. The resulting fluid gels were characterized using different techniques such as differential scanning calorimetry (DSC), viscometry, and XRD measurements.     

Estimation of Reactivity Ratios from Multicomponent Copolymerizations

Abstract

The composition of the copolymer formed from n monomers in addition polymerization can be expressed in terms of the monomer feed composition and n(n - 1) binary reactivity ratios, according to the familiar simple copolymer model. Reactivity ratios are determined experimentally from cor-responding feed and monomer compositions in binary co-polymerizations. This article reports methods for deriving such reactivity ratios directly from multicomponent polymerization data. Analytical solution of the multi-component copolymer equations is not feasible because of the limited number of experimental points and experimental uncertainty in the copolymer composition. Computer-assisted procedures have been developed to estimate re-activity rates by optimizing the fit of predicted and experimental copolymer compositions, given the monomer feed composition and preliminary values of the reactivity ratios. All n(n - 1) reactivity ratios are adjustable. The methods are demonstrated for styrene/methacrylonitrile/ a-methylstyrene, butadiene/styrene/2-methyl- 5-vinyl- pyridine and acrylonitrile/methyl methacrylate/& methylstyrene systems. Binary reactivity ratios predict ternary copolymer compositions generally well in these cues. Reasons are suggested why reactivity ratios from multicomponent experiments may not match the corresponding parameters from binary copolymerizations.     

嵌段共聚物PVCH-b-PE-b-PVCH的多重结晶行为

通过采用差示扫描量热仪(DSC)主要研究了结晶-非晶嵌段共聚物聚乙烯基环己烷-b-聚乙烯-聚乙烯基环己烷(PVCH-b-PE-b-PVCH)溶液结晶样品的熔融与非等温再结晶过程.探讨了溶液结晶样品中微相分离结构的形成对嵌段共聚物受限结晶的影响,并发现样品在熔融后的非等温结晶过程中出现了多重结晶峰.通过对嵌段共聚物有序、...