The Use of Butane Diacetals of Glycolic Acid as Precursors for the Synthesis of the Phytotoxic Calmodulin Inhibitor Herbarumin II

The total synthesis of phytotoxic nonenolide herbarumin II ( 1 ) has been achieved by implementation of butane diacetal (BDA)‐desymmetrised glycolate building blocks. Three of the four stereogenic centres present in the key coupling fragments were generated from both enantiomeric forms of the BDA building block in highly diastereoselective alkylation and aldol reactions.     

Diastereoselective aldol reactions with butane-2,3-diacetal protected glyceraldehyde derivatives

Diastereoselective aldol coupling reactions with butane-2,3-diacetal (BDA) protected glyceraldehyde derivatives are reported. Good selectivities of up to 20:1 for the homologated aldol products have been achieved in preparatively useful yields.     

Synthesis and diastereoselective Diels-Alder reactions of homochiral C2-symmetric butane-1,2-diacetal-based 1,3-dienes

The C₂-symmetric, butane diacetal (BDA) auxiliary-based dienes 2 and 3 are described, which display moderate to excellent diastereoselectivities in Diels-Alder reactions with a range of dienophiles under thermal and Lewis acid-catalysed conditions.     

含轴手性磺酸配体的镉配合物(英)

The crystal structure of [Cd(BDA)(phen)₂(H₂O)](H₂O)₂ (1) (BDA=6,6′-dibromo-2,2′-dimethoxy-1,1′-binaphthylene-4,4′-disulfonate, phen=1,10-phenanthroline)consists of a cadmium center whose coordination environment can be best described as a slightly distorted octahedron defined four nitrogen atoms from two phen ligands and two oxygen atoms differently from BDA ligand and water. There are strong hydrogen-bonding interactions between water and sulfonate group of BDA ligands to construct the 3D network. CCDC: 277921.     

Self-assembly of nanoscale,porous T-symmetric molecular adamantanoids

Treatments of lanthanide nitrate or perchlorate and C2-symmetric 2,2'-hydroxy-1,1'-binaphthalene-6,6'-dicarboxylic acid (6,6'-H2BDA) led to diastereoselective self-assembly of nanoscale, porous molecular adamantanoids [Ln4(BDA)6(H2O)12]*12DMF (Ln = Gd, La, 1a,b). These adamantanoid clusters possess perfect T symmetry as a result of the C2-symmetric nature of BDA bridging ligands and C3-symmetric nature of lanthanide ions. Face-to-face intercluster hydrogen bonds formed between 2,2'-dihydroxyl groups of BDA ligands and carboxylate oxygen atoms direct the assembly of 3D polycages based on chiral molecular adamantanoid building blocks which possess two different types of open channels.     

有机二磺酸锰配合物(英)

The crystal structure of [Mn(BDA)(bpy)₂(H₂O)](H₂O)₂ (1)(BDA=6,6′-dibromo-2,2′-dimethoxy-1,1′-binaphthylene-4,4′-disulfonate, bpy=2,2′-bipyridine) composes of a manganese center which is surrounded by two nitrogen atoms from 2,2′-bipyridine and four oxygen atoms from three water and sulfonate group of BDA that also participate in H-bonding interactions to form 3D network as well as some uncoordinated water. CCDC: 277922.     

Hierarchical assembly of homochiral porous solids using coordination and hydrogen bonds

A family of homochiral metal carboxylate coordination polymers have been synthesized by treating 2,2'-dihydroxy-1,1'-binaphthalene-6,6'-dicarboxylic acid (H(2)BDA) with metal salts at elevated temperatures. BDA ligands link adjacent metal centers to form 1D coordination polymeric chains using the carboxylate functionality, while the hydroxyl groups of BDA ligands form H-bonds with carboxylate oxygen atoms to link 1D coordination polymeric chains into open frameworks of higher dimensionality. We also present evidence for the important role played by H-bonds in the stabilization of open framework structures which allows for the hierarchical assembly of chiral porous solids.     

Microwave-assisted synthesis and antitumor activity of the supramolecular complexes of betulin diacetate with arabinogalactan

In this work, a water-soluble supramolecular complex was synthesized in an aqueous suspension of betulin diacetate (BDA) and arabinogalactan (AG) upon microwave heating. Microwave heating allows reducing the time required for the complex formation, compared with conventional heating in a water bath. The specific effect of microwave irradiation on the initial reagents and preparation of a supramolecular complex was studied. In contrast to conventional heating, under microwave heating AG macromolecules may break into roughly equal fragments when the temperature increases up to 100 °C. A change in the surface morphology of BDA crystals under microwave heating of the suspension suggests that microwave irradiation facilitates the dissolution of BDA in water. It has been shown that the use of dimethylsulfoxide as a reaction medium for microwave heating led to a decrease in BDA content in the product due to the inclusion of DMSO into AG macromolecules. The BDA–AG complex was isolated from the microwave-heated aqueous solution, after water evaporation, as a thin amorphous film, which exhibited antitumor activity against Ehrlich ascites carcinoma cells and can be a promising material for pharmacological applications.     

A low energy electron microscopy study of the initial growth, structure, and thermal stability of 4,4'-biphenyldicarboxylic acid domains on Cu(001)

The growth of 4,4(')-biphenyldicarboxylic acid (BDA) on Cu(001) has been studied using low energy electron microscopy and selective area low energy electron diffraction. The emergence of large islands and hydrogen bonding to perpendicularly oriented, adjacent molecules is confirmed. The two benzene rings of adsorbed BDA are twisted along the molecular axis. Unconventional growth of the domains, followed by a second nucleation stage, is observed at room temperature. This unanticipated feature is attributed to the accumulation of stress in the islands. Ostwald ripening in the films and the decay of BDA domains at 448 K exhibits features that are consistent with diffusion limited behavior.     

Influence of functional groups on charge transport in molecular junctions

Using density functional theory (DFT), we analyze the influence of five classes of functional groups, as exemplified by NO(2), OCH(3), CH(3), CCl(3), and I, on the transport properties of a 1,4-benzenedithiolate (BDT) and 1,4-benzenediamine (BDA) molecular junction with gold electrodes. Our analysis demonstrates how ideas from functional group chemistry may be used to engineer a molecule's transport properties, as was shown experimentally and using a semiempirical model for BDA [Nano Lett. 7, 502 (2007)]. In particular, we show that the qualitative change in conductance due to a given functional group can be predicted from its known electronic effect (whether it is sigma/pi donating/withdrawing). However, the influence of functional groups on a molecule's conductance is very weak, as was also found in the BDA experiments. The calculated DFT conductances for the BDA species are five times larger than the experimental values, but good agreement is obtained after correcting for self-interaction and image charge effects.     

Exploring Network Formation of Tough and Biocompatible Thiol‐yne Based Photopolymers

This work deals with the in‐depth investigation of thiol‐yne based network formation and its effect on thermomechanical properties and impact strength. The results show that the bifunctional alkyne monomer di(but‐1‐yne‐4‐yl)carbonate ( DBC ) provides significantly lower cytotoxicity than the comparable acrylate, 1,4‐butanediol diacrylate ( BDA ). Real‐time near infrared photorheology measurements reveal that gel formation is shifted to higher conversions for DBC /thiol resins leading to lower shrinkage stress and higher overall monomer conversion than BDA . Glass transition temperature (T_g), shrinkage stress, as well as network density determined by double quantum solid state NMR, increase proportionally with the thiol functionality. Most importantly, highly cross‐linked DBC /dipentaerythritol hexa(3‐mercaptopropionate) networks (T_g ≈ 61 °C) provide a 5.3 times higher impact strength than BDA , which is explained by the unique network homogeneity of thiol‐yne photopolymers.

     

Synthesis and properties of 4,4′-biphenyldicarboxylic acid and 2,6-naphthalenedicarboxylic acid

This article describes the synthesis and the properties of polyesters and copolyesters prepared from ethylene glycol, terephthalic acid, 4,4′ biphenyldicarboxylic acid (BDA), and 2,6-naphthlenedicarboxylic acid (NDA). The effect of incorporating varying levels of BDA and NDA on polyethylene terephthalate (PET) is described. Depending on the concentration, incorporation of BDA into PET leads to an improvement in glass transition temperature (T_g), strength, modulus, and barrier properties. Copolymers of PET containing up to about 50% BDA derived units are clear and have T_g's ranging from 85 to 105°C, making them suitable for applications where a high T_g along with clarity is important. Copolymers with higher BDA concentration are highly crystalline, with high rates of crystallization from the melt. Copolymerization of NDA with oligoethyleneterephthalate leads to copolymers that are generally amorphous. Crystallinity can be developed in copolymers with low concentration of NDA by thermal annealing. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3139–3146, 1999     

Boron dipyrromethene fluorophore based fluorescence sensor for the selective imaging of Zn(II) in living cells

A simple PET fluorescence sensor (BDA) for Zn2+ that utilizes 1,3,5,7-tetramethyl-boron dipyrromethene as a reporting group and di(2-picolyl)amine as a chelator for Zn2+ has been synthesized and characterized. BDA has an excitation (491 nm) and emission wavelength (509 nm) in the visible range. The fluorescence quantum yields of the zinc-free and zinc-bound states of BDA are 0.077 and 0.857, respectively. With a low pKa of 2.1 +/- 0.1, BDA has the advantage of less sensitivity to pH than fluorescein-based Zn2+ sensors, and the fluorescence emission of zinc-binding is pH-independent in the range of pH 3-10. Under physiological conditions, metal ions such as Na+, K+, Ca2+, Mg2+, Mn2+ and Fe2+ have little interference. The apparent dissociation constant (Kd) is 1.0 +/- 0.1 nM. Using fluorescence microscopy, the sensor is shown to be capable of imaging intracellular Zn2+ changes.     

A novel four-component reaction of diethylamine, an aromatic aldehyde and an alkyl isocyanide with dialkyl acetylenedicarboxylates in the presence of silica gel: an efficient route for the regio- and stereoselective synthesis of sterically congested alkenes

The 1:1 intermediate generated by the addition of an isocyanide to a dialkyl acetylenedicarboxylate is trapped by the iminium ion intermediate that forms from the reaction between an aromatic aldehyde and diethylamine. The reactions were completed in the presence of silica gel powder. The product dialkyl 2-[(alkylamino)carbonyl]-3-[(Z)-1-(diethylamino)-1-arylmethylidene]succinates, were produced in acceptable yields. The reactions are completely regio- and stereoselective.     

Plate-to-plate fluorous solid-phase extraction for solution-phase parallel synthesis

A commercially available Argonaut VacMaster-96 plate-to-plate solid-phase extraction (SPE) station equipped with 24 FluoroFlash cartridges is employed for parallel purification of fluorous reaction mixtures. Each cartridge charged with 3 g of fluorous silica gel has the capability to produce up to 100 mg of purified small molecules. The 24-well receiving plate has a standard footprint that can be directly concentrated in a Genevac vacuum centrifuge. Important issues such as sample loading, product cross-contamination, cartridge reuse, and reproducibility are investigated. The SPE system has been demonstrated in the purification of three small libraries that were produced involving amine scavenging reactions with fluorous isatoic anhydride, amide coupling reactions with 2-chloro-4,6-bis[(perfluorohexyl)propyloxy]-1,3,5-triazine (fluorous CDMT), and amide coupling reactions with a newly developed fluorous Mukaiyama condensation reagent.     

Design, synthesis and characterization of a novel pH-sensitive hydrogel

A novel degradable pH-sensitive hydrogel with pendent carboxyl groups was designed and synthesized from ethylenediaminetetraacetic dianhydride （EDTAh） and butanediamine （BDA） with dicyclohexylcarbodiimide （DCC） as a condensating agent and BDA as a crosslinking agent. The obtained polymers were characterized by ^13C NMR, ^1H NMR and FTIR. The swelling experiments of the hydrogel in pH 3, 7, and 12 media indicated much higher swelling ratio in pH 12 media than in pH 3 and pH 7 media, exhibiting sound pH sensitivity. The pH sensitivity of this type of hydrogel may be regulated through controlling the type and the dose of the crosslinking agent.     

消旋的有机二磺酸三邻菲咯啉锌配合物(英)

Compound [Zn(phen)₃][BDA] (1) (BDA=6,6′-dibromo-2,2′-dimethoxy-1,1′-binaphthylene-4,4′-disulfonate, phen= 1,10-phenanthroline) composes of the anion part (racemic-(R,S)-6,6′-dibromo-2,2′-dimethoxy-1,1′-binaphthylene-4,4′-disulfonate ) and the cation part which consists of a racemic octahedrally coordinated zinc center defined six nitrogen atoms from three phen rings to form an inorganic chirality that can be resolution by chiral organic ligand, the 3D framework was formed through the strong H-bonding interaction between sulfonate and water. CCDC: 277924.     

光化学反应中的磁场效应——吸附在硅胶表面上的芳砜的光解

本文研究了吸附在硅胶表面上的芳砜的光化学,发现硅胶表面限制光解产生的自由基的移动,外加约150高斯的磁场显著地改变产物的分配比例,对这种磁场效应的机理进行了讨论。     

Silicon tetraacetate as a sol-gel precursor

Variations in the starting materials, solvent, catalyst, and water to alkoxide ratio affect gel times and gel properties in sol-gel reactions. Silicon tetraacetate-derived sols gel surprisingly quickly. This paper discusses the acid catalyzed hydrolysis and condensation of silicon tetraacetate in an attempt to understand this rapid gelation. ²⁹Si and ¹H NMR spectra show that tetraethoxysilane is an intermediate, and ethyl acetate is produced via a secondary reaction. A correlation between gel times and H⁺ concentration is demonstrated.     

Preparation of stationary phases for open-tubular capillary electrochromatography using the sol-gel method

Capillary electrochromatography requires the deposition of a stationary phase inside the capillary. In this paper the sol-gel method is proposed for this purpose. The gels were prepared externally and injected into a fused-silica capillary, where anchorage to the capillary wall was possible through condensation reactions between the silanol groups of the capillary wall and the residual silanol groups the gel. Contrary to a commonly used practice, alkaline pretreatment of the inner capillary wall prior to the introduction and anchoring of the gel was found to be only marginally effective in improving the mechanical stability of the column. The influence of various parameters, such as the pH, the water content, the presence of alcohol (ethanol) on the formation of tetraethoxysilane (TEOS)-n-octyltriethoxysilane (C8-TEOS) hybrid gels of varied composition is discussed. The pH and the amount of water present were found to be the determining factors in the preparation of a stable gel with the desired mechanical and chromatographic properties. By carrying out the gel formation at 80 degrees C, capillary columns could be produced in 2.5 h. While an acidic pH was required during (external) gel formation, subsequent treatment of the gel inside the capillary with an alkaline solution ('aging') was found to improve separation and stationary phase capacity significantly. The capillary columns were subsequently used to separate a mixture of polycyclic aromatic hydrocarbons in less than 3 min.