The Influence of Activating Agents on the Controlled Synthesis of Poly(methyl methacrylate) in the Presence of Ruthenacarboranes

The radical polymerization of methyl methacrylate catalyzed by systems based on the carborane complexes of ruthenium(III) is studied in the presence of a number of activating agents: tin 2-ethyl hexanoate, aluminum isopropoxide, isopropylamine, and AIBN. It is shown that in the presence of the systems under consideration, polymerization proceeds in a controlled mode via the ATRP mechanism (AGET or ICAR ATRP) at catalyst concentrations with ppm level relative to that of the monomer. As the degree of monomer conversion grows, the molecular weight of the polymer increases linearly while its polydispersity coefficients decrease linearly. The role of the mentioned agents is to transfer the catalyst to the active form containing a metal atom in the oxidation number +2 and able to interact with halogen-terminated dormant polymer chains. It is first shown that the carborane complexes of ruthenium(II) are applicable for the catalysis of controlled radical polymerization.     

梳形接枝共聚物的合成(Ⅱ)——载体化钌卡宾络合物催化降冰片烯基聚苯乙烯的开环岐化聚合

由石油化工副产C₅馏份提取双环戊二烯(DCPD)、以聚合物负载三氟化硼为催化剂进行DCPD与烯丙基氯(AC)的Diels-Alder反应合成5-氯甲基-2-降冰片烯(NBCH₂Cl),经锂代反应后用以引发苯乙烯的活性阴离子聚合合成了降冰片烯(NB)基聚苯乙烯(PS)大分子环烯单体NB-PS,在聚合物负载钌卡宾络合物[RuCl₂(PPh₃)₂(=C=CHtBu)]催化(引发)作用下进行大分子单体NB-PS的开环歧化聚合(ROMP)合成了梳形接枝共聚物PNB-g-PS.实验结果表明所合成聚合物负载硼、钌络合物催化剂的性能均明显优于对应非负载体.讨论了上述催化剂的聚合物载体效应的机理及温度、溶剂等对活性阴离子聚合反应的影响.     

ESIMS Studies and Calculations on Alkali‐Metal Adduct Ions of Ruthenium Olefin Metathesis Catalysts and Their Catalytic Activity in Metathesis Reactions

Electrospray ionization mass spectrometry (ESIMS) and subsequent tandem mass spectrometry (MS/MS) analyses were used to study some important metathesis reactions with the first‐generation ruthenium catalyst 1 , focusing on the ruthenium complex intermediates in the catalytic cycle. In situ cationization with alkali cations (Li⁺, Na⁺, K⁺, and Cs⁺) using a microreactor coupled directly to the ESI ion source allowed mass spectrometric detection and characterization of the ruthenium species present in solution and particularly the catalytically active monophosphine–ruthenium intermediates present in equilibrium with the respective bisphosphine–ruthenium species in solution. Moreover, the intrinsic catalytic activity of the cationized monophosphine–ruthenium complex 1 a ?K⁺ was directly demonstrated by gas‐phase reactions with 1‐butene or ethene to give the propylidene Ru species 3 a ?K⁺ and the methylidene Ru species 4 a ?K⁺, respectively. Ring‐closing metathesis (RCM) reactions of 1,6‐heptadiene ( 5 ), 1,7‐octadiene ( 6 ) and 1,8‐nonadiene ( 7 ) were studied in the presence of KCl and the ruthenium alkylidene intermediates 8 , 9 , and 10 , respectively, were detected as cationized monophosphine and bisphosphine ruthenium complexes. Acyclic diene metathesis (ADMET) polymerization of 1,9‐decadiene ( 14 ) and ring‐opening metathesis polymerization (ROMP) of cyclooctene ( 18 ) were studied analogously, and the expected ruthenium alkylidene intermediates were directly intercepted from reaction solution and characterized unambiguously by their isotopic patterns and ESIMS/MS. ADMET polymerization was not observed for 1,5‐hexadiene ( 22 ), but the formation of the intramolecularly stabilized monophosphine ruthenium complex 23 a was seen. The ratio of the signal intensities of the respective with potassium cationized monophosphine and bisphosphine alkylidene Ru species varied from [I _4a ]/[I ₄ ]=0.02 to [I _23a ]/[I ₂₃ ]=10.2 and proved to be a sensitive and quantitative probe for intramolecular π‐complex formation of the monophosphine–ruthenium species and of double bonds in the alkylidene chain. MS/MS spectra revealed the intrinsic metathesis catalytic activity of the potassium adduct ions of the ruthenium alkylidene intermediates 8 a , 9 a , 10 a , 15 a , and 19 a , but not 23 a by elimination of the respective cycloalkene in the second step of RCM. Computations were performed to provide information about the structures of the alkali metal adduct ions of catalyst 1 and the influence of the alkali metal ions on the energy profile in the catalytic cycle of the metathesis reaction.     

Trends in Ring-Opening Metathesis Polymerization

Abstract

Several transition metal alkylidene complexes are first discussed as catalysts for the ring-opening metathesis reaction. A new ruthenium catalyst with a slightly enhanced reaction rate is introduced. The stereochemistry and kinetics of the catalysts are investigated with different norbornene derivatives. Then it is shown that MgCl₂ alone is a good heterogeneous catalyst for the ring-opening polymerization (ROMP) of norbornene compounds. This is the first catalyst which does not need activation by a transition metal compound or another organometallic cocatalyst. Applications of the ROMP reaction for the synthesis of polymer specialities covering conjugated liquid crystals and optically active polymers are shown. Poly(cyclopentadienylene vinylene) and sidechain liquid crystal polymers are discussed in more detail. Finally, the synthesis of liquid crystalline elastomers by incorporation of bifunctional monomers during the ROMP reaction is described. It is shown that this kind of polymer can be used for the fabrication of optically anisotropic materials.     

Electrooxidative Ruthenium‐Catalyzed C−H/O−H Annulation by Weak O‐Coordination

Electrocatalysis has been identified as a powerful strategy for organometallic catalysis, and yet electrocatalytic C?H activation is restricted to strongly N‐coordinating directing groups. The first example of electrocatalytic C?H activation by weak O‐coordination is presented, in which a versatile ruthenium(II) carboxylate catalyst enables electrooxidative C?H/O?H functionalization for alkyne annulations in the absence of metal oxidants; thereby exploiting sustainable electricity as the sole oxidant. Mechanistic insights provide strong support for a facile organometallic C?H ruthenation and an effective electrochemical reoxidation of the key ruthenium(0) intermediate.     

Side‐chain functionalized polymers containing bipyridine coordination sites: Polymerization and metal‐coordination studies

Monomers containing (trisbipyridine) ruthenium(II), (bisbipyridine) palladium(II), and heteroleptic ruthenium complexes were synthesized and polymerized via ruthenium‐catalyzed ring‐opening metathesis polymerization in nonpolar solvents. The solubility of the resulting polyelectrolytes in nonpolar solutions could be tuned by alkyl functionalization of the ligands around the metal centers. These polymers are the first polynorbornenes containing a 2,2′‐bipyridine‐based metal complex at each repeating unit and might be used in numerous applications, including luminescent and electroluminescent materials. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2973–2984, 2004     

In situ‐generated Ru(III)‐mediated ATRP from the polymeric Ru(III) complex in the absence of activator generation agents

Past research has examined the atom transfer radical polymerization (ATRP) with high oxidation state metal complexes and without the need for any additives such as reducing agent or free radical initiator. To extend this research, half‐metallocene ruthenium(III) (Ru(III)) catalysts were used for the polymerization of methyl methacrylate (MMA) for the first time. These catalysts were generated in situ simply by mixing phosphorus‐containing ligand and pentamethylcyclopentadienyl (Cp*) Ru(III) polymer ((Cp*RuCl₂)_n). The complexes in their higher oxidation state such as Cp*RuCl₂(PPh₃) were air‐stable, highly active, and removable catalysts for the ATRPs of MMA with both precision control of molecular weight and narrow polydispersity index. The addition of ppm amount of metal catalyst contributed to the formation of very well‐defined homopolymers and copolymers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Ring‐opening metathesis polymerization of cis‐cyanocyclooct‐4‐ene: Search for active catalysts,variation of monomer to catalyst ratios and monomer concentrations

The ring‐opening metathesis polymerization (ROMP) of cis‐cyanocyclooct‐4‐ene initiated by ruthenium‐based catalysts of the first, second, and third generation was studied. For the polymerization with the second generation Grubbs catalyst [RuCl₂(?CHPh)(H₂IMes)(PCy₃)] (H₂IMes = N,N′‐bis(mesityl)‐4,5‐dihydroimidazol‐2‐ylidene), the critical monomer concentration at which polymerization occurs was determined, and variation of monomer to catalyst ratios was performed. For this catalyst, ROMP of cis‐cyanocyclooct‐4‐ene did not show the features of a living polymerization as M_n did not linearly increase with increasing monomer conversion. As a consequence of slow initiation rates and intramolecular polymer degradation, molar masses passed through a maximum during the course of the polymerization. With third generation ruthenium catalysts (which contain 3‐bromo or 2‐methylpyridine ligands), polymerization proceeded rapidly, and degradation reactions could not be observed. Contrary to ruthenium‐based catalysts of the second and third generation, a catalyst of the first generation was not able to polymerize cis‐cyanocyclooct‐4‐ene. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

SYNTHESIS OF A COMB GRAFT COPOLYMER VIA RING OPENING METATHESIS POLYMERIZATION CATALYZED BY SUPPORTED RHUTHENIUM CARBENE COMPLEX

Comb graft copolymers (CGC), a special kind of the hyper-branched polymer series, have unique and excellent properties [1,2]. Synthesizing CGC via ring opening metathesis polymerization (ROMP) of cycloolefinyl macromonomer catalyzed (initiated) by the molybdenum carbene complex (Schrock complex) is a newly-developed method [3,4]. Though showing excellent catalytic behavior the complex has the disadvantage of highly moisture and oxygen sensitive and is hence operation-inconvenient. We repor…     

Ruthenium alkylidenes: modulation of a new class of catalysts for controlled radical polymerization of vinyl monomers

Air-stable and readily available ruthenium benzylidene complexes of the general type [RuCl2(=CHPh)(L)(L')] (L, L' = PCy3 and/or N-heterocyclic carbene) constitute a new class of catalyst precursors for atom-transfer radical polymerization (ATRP) of methyl methacrylate and styrene, and provide an unprecedented example for the involvement of ruthenium alkylidenes in radical reactions. They promote the polymerization of various monomers with good to excellent yields, and in a controlled way with methyl methacrylate and styrene. Variations of their basic structural motif provide insights into the essential parameters responsible for catalytic activity. The ligands L (PCy3 and/or N-heterocyclic carbene) turned out to play a particularly important role in determining the rate of the polymerizations. A similarly pronounced influence is exerted by the substituents on the N-heterocyclic carbene. Our results indicate that the catalysts decompose quickly under ATRP conditions, and polymerizations are mediated by both [RuCl2(=CHPh)(L)(L')] complexes and ruthenium species bereft of the benzylidene moiety, through a pathway in which both tricyclohexylphosphane and/or N-heterocyclic carbene ligands remain bound to the metal center. Polymerization of n-butyl acrylate and vinyl acetate is not controlled and most probably takes place through a redox-initiated free-radical process.     

SYNTHESIS OF A COMB GRAFT COPOLYMER VIA RING OPENING METATHESIS POLYMERIZATION CATALYZED BY SUPPORTED RHUTHENIUM CARBENE COMPLEX

5－Chloromethyl-2-norbornene was synthesized via Diels-alder reaction of cyclopentadiene and allyl chloride using a polymer supported boron trifluoride as the catalyst,and was then lithiated and used to initiate a livcing anionic polymerization of styrene to prepare a macromonome,5-polystryl-2-norbornene NB-PS,Comb graft copolymer PNB-g-PS was synthesized via ring opening metathesis polymerization of the macromonomer under the catalysis of ruthenium carbene complex RuCl2(PPh3)2(=CCHtBu)and its polymer supported correspondent.Experimetal results showed that the behavior of both the supported boron and supported ruthenium catalysts are superior to their unsupported counterparts.The possible promotion mechanism of the tailor-made supports is discussed.     

载体化络合催化开环歧化聚合合成梳形接枝共聚物研究

由环戊二烯（CPD）及烯丙基氯（AC）经聚合物支载三氟化硼催化的Diels-Alder反应合成了5-氯甲基-2-降冰片烯（NB-CH2Cl),锂代后用以引发甲基丙烯酸甲酯（MMA）及苯乙烯（S）的活性阴离子聚合,合成了带聚合物取代基的降冰片烯大分子单体NB-PMMA及NB-PS。在聚合物支载钌卡宾络合物催化作用下进行所合成大分子单体的开环歧化聚合反应（ROMP）,合成了二种接枝于开环歧化聚降冰片烯（PNB）主链的梳形接技共聚物PNB-g-PMMA及PNB-g-PS。实验结果表明所研制聚合物支载硼、钌络合物催化性能明显优于对应非支载活性种。     

Metal‐Free Hydrosilylation Polymerization by Borane Catalyst

The first example of metal‐free hydrosilylation polymerization between dienes and disilanes is developed by using a borane catalyst, B(C₆F₅)₃ to replace precious transition‐metal‐based systems. Under the easy‐to‐handle and mild conditions, a step‐growth polymerization of two readily available diene and disilane units was achieved with high degrees of polymerization. Various combinations of dienes and disilanes produced polycarbosilanes with a broad range of structures and properties.     

FUNCTIONAL TELECHELIC POLYMER SYNTHESIS VIA ADMET POLYMERIZATION

ABSTRACT

Acyclic Diene METathesis (ADMET) polymerization of 1,9-decadiene with epoxy-containing monoolefins using ruthenium based Grubbs' catalyst gave epoxy terminated telechelic polymers. The number of methylene spacers between the olefin and the epoxy from the oxygen side of the epoxy-containing monoolefins was varied from one to three. The optimal condition for the present ADMET polymerization was determined as monomer/catalyst ratio of 200/1 for 96 hr at 90°C. All polymer structures were characterized by FT-IR and ¹H NMR spectroscopy. It is quite interesting that even 1,2-epoxy-4-pentene with one methylene spacer metathesizes successfully using ruthenium catalyst despite this monoolefin suffers a stronger negative neighboring group effect than the other monoolefins. The telechelic polymer was reacted with toluene diisocyanate to give a higher molecular weight segmented copolymer connected with oxazolidone linkage.     

碱性离子液体催化金属调节的甲基丙烯酸甲酯的电子转移活化原子转移自由基聚合

通过电子转移活化原子转移自由基聚合（AGET ATRP）,以2-溴代异丁酸乙酯（EBiB）为引发剂、维生素C（VC）为还原剂。 以碱性离子液体1-丁基-3-甲基咪唑氢氧化盐([Bmim][OH])分别和FeCl3·6H2O、CuCl2及RuCl3形成的配合物为催化剂催化甲基丙烯酸甲酯（MMA）的本体和溶液聚合。 催化量的[Bmim][OH]即可提高聚合速率,并且得到相对分子质量分布可控的PMMA（Mw/Mn为1.20～1.40）。 研究了[Bmim][OH]的加入量对聚合速率和相对分子质量分布的影响,3种催化体系催化性质通过循环伏安曲线表征。 扩链反应证明了碱性离子液体催化甲基丙烯酸甲酯的聚合为“活性”/可控自由基聚合。 碱性离子液体良好的溶解性使其成为活性自由基聚合的良好催化剂。     

Relationships between basicity and reactivity of zeolite catalysts

A wide variety of characterization methods, including UV-vis spectroscopy of adsorbed I₂, microcalorimetry of CO₂ adsorption, and x-ray absorption spectroscopy at the Cs L_III edge of zeolite cations, was applied to a series of alkali containing zeolites in order to elucidate the nature of the basic sites on these materials. In addition, three catalytic reactions involving basic zeolites were studied. In the first case, alkali-exchanged zeolites (L, Beta, X and Y) were used as catalysts for the side-chain alkylation of toluene with methanol to form styrene and ethylbenzene. Zeolites with low base site densities and appropriate base strengths catalyzed toluene alkylation without decomposing methanol to carbon monoxide. In the second example, ruthenium metal clusters were supported on alkali and alkaline earth exchanged X zeolites and tested as catalysts for ammonia synthesis. Zeolites containing alkaline earth ions exhibited rates greater than those containing alkali ions. Finally, zeolite X loaded with alkali metal was an active catalyst for toluene alkylation with ethylene whereas zeolite X loaded with alkali oxide was inactive for the reaction. These results suggest that exciting opportunities exist for the use of basic zeolites as catalysts and catalyst supports.     

Effect of Activated Carbon as a Support on Metal Dispersion and Activity of Ruthenium Catalyst for Ammonia Synthesis

IntroductionSince the beginning of the 2 0 th century,ammonia has been produced over the fused ironcatalyst known as Haber- Bosch process.Thecatalyst most widely used is Fe,promoted withK2 O and Al2 O3and other un- reducible oxides.Thefused iron catalyst has many advantages,such aslow unit price and long lifetime,worldwide about1 40 million tons of ammonia is manufactured peryear in the presence of Fe catalyst.But its lowactivity below40 0℃ makes it necessary to carryout the process at a …     

Single Turnover at Molecular Polymerization Catalysts Reveals Spatiotemporally Resolved Reactions

Multiple active individual molecular ruthenium catalysts have been pinpointed within growing polynorbornene, thereby revealing information on the reaction dynamics and location that is unavailable through traditional ensemble experiments. This is the first single‐turnover imaging of a molecular catalyst by fluorescence microscopy and allows detection of individual monomer reactions at an industrially important molecular ruthenium ring‐opening metathesis polymerization (ROMP) catalyst under synthetically relevant conditions (e.g. unmodified industrial catalyst, ambient pressure, condensed phase, ca. 0.03 m monomer). These results further establish the key fundamentals of this imaging technique for characterizing the reactivity and location of active molecular catalysts even when they are the minor components.     

Encapsulation of transition metal catalysts by ligand-template directed assembly

Encapsulated transition metal catalysts are presented that are formed by templated self-assembly processes of simple building blocks such as porphyrins and pyridylphosphine and phosphite ligands, using selective metal-ligand interactions. These ligand assemblies coordinate to transition metals, leading to a new class of transition metal catalysts. The assembled catalyst systems were characterized using NMR and UV-vis spectroscopy and were identified under catalytic conditions using high-pressure infrared spectroscopy. Tris-3-pyridylphosphine binds three mesophenyl zinc(II) porphyrin units and consequently forms an assembly with the phosphorus donor atom completely encapsulated. The encapsulated phosphines lead exclusively to monoligated transition metal complexes, and in the rhodium-catalyzed hydroformylation of 1-octene the encapsulation of the catalysts resulted in a 10-fold increase in activity. In addition, the branched aldehyde was formed preferentially (l/b = 0.6), a selectivity that is highly unusual for this substrate, which is attributed to the encapsulation of the transition metal catalysts. An encapsulated rhodium catalyst based on ruthenium(II) porphyrins and tris-meta-pyridyl phosphine resulted in an even larger selectivity for the branched product (l/b = 0.4). These encapsulated catalysts can be prepared easily, and various template ligands and porphyrins, such as tris-3-pyridyl phosphite and ruthenium(II) porphyrins, have been explored, leading to catalysts with different properties.     

Ruthenium Complexation in an Aluminium Metal–Organic Framework and Its Application in Alcohol Oxidation Catalysis

A ruthenium trichloride complex has been loaded into an aluminium metal–organic framework (MOF), MOF‐253, by post‐synthetic modification to give MOF‐253‐Ru. MOF‐253 contains open bipyridine sites that are available to bind with the ruthenium complex. MOF‐253‐Ru was characterised by elemental analysis, N₂ sorption and X‐ray powder diffraction. This is the first time that a Ru complex has been coordinated to a MOF through post‐synthetic modification and used as a heterogeneous catalyst. MOF‐253‐Ru catalysed the oxidation of primary and secondary alcohols, including allylic alcohols, with PhI(OAc)₂ as the oxidant under very mild reaction conditions (ambient temperature to 40 °C). High conversions (up to >99 %) were achieved in short reaction times (1–3 h) by using low catalyst loadings (0.5 mol % Ru). In addition, high selectivities (>90 %) for aldehydes were obtained at room temperature. MOF‐253‐Ru can be recycled up to six times with only a moderate decrease in substrate conversion.