磁场对聚乙烯基萘敏化AIBN引发苯乙烯本体光聚合反应的影响

<正> 近年来,Turro等人发现,外磁场能提高一些由油溶性酮类化合物(如二苄基酮)为引发剂的乳液聚合体系的分子量,并且显著地影响所生成聚合物的立体构型,因而引起了人们的注意。     

THE EFFECTS OF MAGNETIC FIELD ON GRAFT COPOLYMERIZATION OF METHYL METHACRYLATE ONTO POLYVINYL ALCOHOL IN THE PRESENCE OF BENZOPHENONE DURING UV IRRADIATION

The effects of magnetic field on the graft ratio and stereoregularity of grafts of PVA-g-MMA in the presence ofbenzophenone during UV irradiation are discussed. By means of IR, it was found that the graft ratio was increased with the increment of magnetic field strength. Furthermore, application of relative weak magnetic field of 0.4 Tesla had been shown to substantially enhance the stereo-regularity of graft copolymer. The maximum stereo-regularity appeared when the graft ratio approached to 85% with the magnetic field of 1.2 Tesla (T). The resistance to moisture and heat resistance of the grafted copolymer in the presence of magnetic field were also improved.     

细乳液聚合法合成高分子量聚乙烯醇的研究

采用十二烷基硫酸钠(SDS)为乳化剂、十六醇(CA)为难溶助剂,引发醋酸乙烯酯(VAc)进行细乳液聚合,以偶氮二异庚腈(ADMVN)为引发剂时,制得了平均聚合度达1.5×104~2.0×104聚醋酸乙烯酯(PVAc)和4.1×103~6.6×103的聚乙烯醇(PVA);以偶氮二脒基丙烷盐酸盐(AAPH)为引发剂时,制得了平均聚合度达1.5×104~2.0×104的PVAc和2.1×103~4.4×103的PVA.研究了引发剂浓度、温度、油水比对产物聚合度、转化率的影响,讨论了SDS∶CA摩尔比对PVAc微球粒径分布及其成粒机理的影响.当cCA∶cSDS=3∶1时得到的细乳液体系稳定性最好,以ADMVN和AAPH引发聚合时均为液滴成核为主,其中以ADMVN引发得到PVAc微球的粒度分布窄于AAPH.     

聚氯乙烯多乙烯多胺树脂催化合成正丁基苯基醚

研究了聚氯乙烯多乙烯多胺树脂催化合成正丁基苯基醚,考察了反应物摩尔比,反应温度,反应时间,催化剂用量等因素对产品收率的影响及催化剂的回收,套用性能,在本实验优化条件下,产品收率达９２％,催化剂回收和重复使用５次,重量未损失。活性未降低。     

聚乙烯醇与硬脂酸酯化反应及性能的研究

聚乙烯醇 (ＰＶＡ)具有良好的成纤成膜性能 ,膜的阻氧性、透明性、抗静电性、韧性、印刷性和耐化学性能优异 ,用途广泛 .ＰＶＡ的缺点是吸湿性大 ,耐水性差 ,熔融加工困难和热稳定性低 .吸湿后 ,ＰＶＡ的强度仅为其干强度的 55%～ 60 % ,膜的阻氧性下降 .ＰＶＡ在 1 60℃开始分子内脱水 ,2 30℃时开始分子间脱水变脆 .由于分子内和分子间有大量氢键存在 ,ＰＶＡ熔融温度高 ,不能熔融加工 ,而溶液成型工艺复杂、成本高、难于制备厚壁和形状复杂的制品 .降低熔融温度、提高热稳定性能是实现ＰＶＡ熔融加工成型的必要条件 .国内外在采用马来酸…     

聚乙烯醇缩对甲酰基偶氮胂的合成及性质

首次研究了聚乙烯醇缩对甲酰基偶氮胂(PV-pFASA)的合成、纯化及其鉴定方法.并初步探讨了在光度分析和非有机溶剂革取分离方面的应用.结果表明,小分子显色剂高分子化后.其分析性能有了明显改善,特别是显色灵敏度和萃取率均有不同程度的提高.     

聚苯胺／聚乙烯醇导电复合膜的制备及性质研究

用较简单的化学氧化现场吸附聚合法（ｉｎ－ｓｉｔｕｐｏｌｙｍｅｒｉｚａｔｉｏｎ）制得了聚苯胺（ＰＡｎ）／聚乙烯醇（ＰＶＡ）导电复合膜．该膜具有较好的导电性和机械性能；其电导率可达５．８ｓ／ｃｍ，拉伸强度达１３ＭＰａ，断裂伸长率为１１０％左右．本文讨论了制备的各种条件对复合膜导电性能及力学性能的影响、稳定性及电化学活性；并采用循环伏安曲线、扫描电镜（ＳＥＭ）、ＦＴＩＲ谱及元素分析对该复合膜的结构和性能进行了表征．     

三价锰离子引发烯类单体在聚乙烯醇上接枝聚合的研究

<正> 无论是淀粉;纤维素,还是聚乙烯醇(PVA)的接枝反应,Ce(Ⅳ)被认为是一个十分有效的引发剂,已有较详尽的研究。与Ce(Ⅳ)相类似,Mn(Ⅲ)也可以和一些高聚物组成氧化还原引发体系,由此产生自由基,引发烯类单体在高分子主干上进行接枝聚合。Ranby等人,以焦磷酸络合的三价锰离子引发烯类单体在纤维素和淀粉的接枝反应中,获得了高效的接枝产物。有用这种引发体系在淀粉上接枝丙烯腈获得吸水276     

STUDY ON THE MORPHOLOGY OF POLYVINYL CHLORIDE/POLYSTYRENE BLENDS BY ELECTRON MICROPROBE ANALYSIS*

The morphology of polyvinyl chloride/polystyrene (PVC/PS) blend samples with different mass ratios, preparedby means of solution casting and melt mixing, have been successfully examined by electron microprobe analysis (EMP). Thisexperiment was performed in a scanning electron microscope attached to an energy dispersive X-ray analyzer. Differentialscanning calorimetry was also used to investigate the phase separation of the blends. The results show that PVC and PS areincompatible and the blends have sea-islands phase structures. Blends prepared via melt mixing have finer phase-dispersionthan those prepared via solution casting.     

PVC-二亚乙基三胺(DETA)-Pd对Heck反应的催化性能研究

以聚氯乙烯为原料,用较简单的方法得到了聚氯乙烯二亚乙基三胺负载钯配合物(PVC-DETA-Pd).PVC-DETA-Pd具有较高的热稳定性,可以满足Heck反应所需要的高温条件.在110℃、氮气氛围,四丁基溴化铵(TBAB)做溶剂的条件下,PVC-DETA-Pd催化溴苯与苯乙烯的反应产率可以达到99%.PVC-DETA-Pd在多种缚酸剂的存在下均可有效地催化芳基溴的Heck反应,但在三丁胺中具有最好的效果.在适当的反应条件下,以PVC-DETA-Pd为催化剂,各种带取代基芳基溴、芳基氯均可以有效地与乙烯基化合物反应,反应产率>70%.PVC-DETA-Pd还具有较好的重复使用性能.     

Synthesis and characterization of polyvinyl butyral–Al(NO<Subscript>3</Subscript>)<Subscript>3</Subscript> composite sol used for alumina based fibers

The polyvinyl butyral–Al(NO₃)₃ composite sol used for alumina based fibers was synthesized by the sol–gel process in an aqueous solution using the polyvinyl butyral (PVB) and Al(NO₃)₃ · 9H₂O (AN). The alumina fibers with smooth surface and uniform diameter were prepared. PVB, AN, PVB–AN composite sol and alumina fibers have been studied by X-ray diffraction (XRD), derivative thermo-gravimetric/differential scanning calorimetry (DTG/DSC), Fourier transform infrared (FTIR) spectroscopy, and scanning electron microscopy (SEM). The interaction between PVB and AN was reported. The presence of a new weak peak at low angle and deviation of diffraction angle in XRD patterns implied that the reaction between PVB and AN took place. DTG/DSC curves showed the decomposition temperatures of AN increased and that of PVB decreased in the PVB–AN composite sol, which was considered to be caused by the interaction between PVB and AN. FTIR spectroscopy of PVB–AN gel showed a new absorption peak due to the COOH group, which implied the presence of new reaction product. The schematic reaction formula was shown in this paper. The XRD pattern of fibers sintered at 1,200 °C showed the formation of α-alumina and the fibers showed smooth surface and uniform diameter.     

乙烯系单体自由基聚合的阻聚效应——Ⅸ.受阻胺-醌类电荷转移络合物对甲基丙烯酸甲酯自由基聚合的阻聚及历程

用膨胀计法研究了西氯苯醌(CA)、苯醌(BQ)与受阻胺二异丙胺(DIPA)、2,2,6,6-四甲基-4-羟基哌啶(TMP)形成的电荷转移络合物(CTC)对偶氮二异丁腈(AIBN)引发的甲基丙烯酸甲酯(MMA)自由基聚合阻聚效应。结果表明,CA-DIPA、CA-TMP、BQ-DIPA和BQ-TMP对MMA的自由基聚合均产生较单独的醌或胺更显著的阻聚能力。其中以CA-DIPA阻聚效果更佳。比较了MMA在苯或乙腈中的溶液聚合,得类似结果。初步讨论了受阻胺-醌电荷转移络合物对MMA自由基聚合的阻聚反应机理。     

基于双层纳米金修饰的高灵敏电位型乙肝表面抗原免疫传感器研究

基于电沉积和层层自组装技术，提出了一种新的生物分子固定化方法，研制成一种高灵敏电位型乙肝表面抗原免疫传感器。利用L-半胱胺酸（LCys）的双官能团结合双层纳米金，从而通过比表面积大，生物相容性好的纳米金胶吸附大量抗体，同时用聚乙烯醇缩丁醛（PVB）薄膜的笼效应把乙肝表面抗体（HBsAb）和纳米金固定在玻碳电极上，从而制得了高灵敏度、高稳定性的电位型免疫传感器。采用循环伏安法（CV）对电极的层层自组装过程进行了考察，并对该免疫传感器的性能进行了详细的研究。该免疫传感器线性范围是8．5～256．0ng／mL，线性相关系数为0．9978，灵敏度为89．0，检出限为3．1ng／mL。已用于病人的血清样品分析。     

聚乙烯醇纤维金属配合物的合成和表征

以聚乙烯醇纤维(PVA)为配体原料,分别与FeCl3、NiCl2、CuCl2和Pb(Ac)2反应,制备了宏观上仍保持原纤维形态的PVA Fe(Ⅲ)、PVA Ni(Ⅱ)、PVA Cu(Ⅱ)、PVA Pb(Ⅱ)纤维配合物(用PVA M表示).用红外光谱仪分别对PVA和4种配合物在4000～400cm-1范围进行傅立叶变换红外光谱测量,对各PVA M的FTIR主要吸收峰做了经验归属,并与PVA的相应吸收峰做对比分析,结果表明,与金属离子形成配合物后,PVA分子中O—H氢键缔合状态被破坏,向高波数位移了65～86cm-1,PVA中的羟基氧与金属离子发生配位作用.PVA Fe(Ⅲ)的XPS显示,PVA中O1s只出现532.5eV单峰,而PVA Fe(Ⅲ)中O1s分裂为531.4eV和532.3eV两个峰,且Fe2p只有一个峰710.9eV,比FeCl3的结合能值711.2eV下降,说明OH氧与Fe3+形成配位键.     

Potentiometric Immunosensor Based on Immobilization of Hepatitis B Surface Antibody on Platinum Electrode Modified Silver Colloids and Polyvinyl Butyral as Matrixes

A highly sensitive immunosensor based on immobilization of hepatitis B surface antibody (HBsAb) on platinum electrode (Pt) modified silver colloids and polyvinyl butyral (PVB) as matrixes has been developed for potentiometric immunoanalysis to detect hepatitis B surface antigen (HBsAg) in this study. HBsAb molecules were immobilized successfully on nanometer‐sized silver colloid particles associated with polyvinyl butyral on a platinum electrode surface. The modification procedure was electrochemically monitored by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The HBsAb‐silver‐PVB‐modified electrode exhibited direct electrochemical behavior toward HBsAg. The factors influencing the performance of the resulting immunosensor were studied in detail. More than 94.7% of the results of human serum samples obtained by this method were in agreement with those obtained by enzyme‐linked immunosorbent assays (ELISAs). The resulting immunosensor exhibited a sigmoid curve with log HBsAg concentration, high sensitivity (39.8 mV/decade), wide linear range from 16.0 to 800 ng mL^?1 with a detection limit of 3.6 ng mL^?1, fast potentiometric response (<3 min) and long‐term stability (>4 months). The response mechanism of the immunosensors was also studied with AC impedance techniques.     

Copolymerization of styrene and acrylonitrile with functional silanes

Styrene has been copolymerized to high conversions with vinylmethyl diacetoxysilane (VMDAS) and vinylmethyldiethoxysilane (VMDES) in bulk and in toluene at 60 using azobisisobutyronitrile (AIBN) as initiator. Acrylonitrile has also been copolymerized with VMDAS at 50 in bulk using AIBN. The compositions of the copolymers were determined from the silicon contents; reactivity ratios were calculated by the Kelen-Tüdös method. The reactivity ratio r₁ (styrene) is higher for styrene-VMDES than for styrene-VMDAS, indicating higher reactivity of VMDAS towards polystyryl radical. VMDAS was found to be more reactive towards the polyacrylonitrile than towards the polystyrene radical. The influences of the silicon comonomer on properties such as intrinsic viscosity, solubility, molecular weight distribution and thermal behaviour were also studied.     

以锆盐为交联剂的耐盐型聚乙烯醇高吸水树脂的合成

以锆盐为交联剂的耐盐型聚乙烯醇高吸水树脂的合成刘德荣，颜杰，刘习奎，刘兴勇（四川轻化工学院化学工程系自贡６４３０３３）关键词聚乙烯醇锆盐络合树脂，耐盐型聚乙烯醇吸水树脂，磷酸化聚乙烯醇本研究采用两种方法在聚乙烯醇中引人磷酸根．（ｌ）聚乙烯醇和磷酸反应...     

A FLUORESCENCE STUDY OF THE INTERACTION OF INDOLIC COMPOUNDS WITH SYNTHETIC POLYELECTROLYTES

Abstract— –The interaction of indole derivatives with synthetic polyelectrolytes was investigated using UV absorption and fluorescence spectroscopy. The presence of both sodium poly(styrene sulfonate) (PSS) and sodium polyvinyl sulfonate) (PVS) inhibits the fluorescence quenching of 1-pyrene sulfonic acid by tryptamine. The effect is more marked for PSS than for PVS. There was no polyelectrolyte effect on the quenching by tryptophan. It was also found that aromatic polyelectrolytes strongly quench the fluorescence of indole derivatives of opposite charge by a static mechanism. This is accompanied by a new absorption in the red extreme of the UV spectrum of the mixtures. The systems investigated were tryptamine-PSS and polyvinyl benzyl trimethylammonium chloride) with the anions of indole-3-alkanoic acids. Equilibrium constants for the binding of the indole derivatives to the polyelectrolytes were determined. The fluorescence of zwitterionic tryptophan is not affected by the presence of the polyelectrolytes.     

聚乙烯醇硫酸钾水凝胶电机械化学行为研究

通过将交联聚乙烯醇硫酸酯化的方法制备了一种新型电刺激响应性聚乙烯醇硫酸钾(PVSK)智能水凝胶,并探讨了溶液离子强度和pH对PVSK水凝胶的溶胀吸水率、机械性能以及电机械化学行为的影响.结果表明,制备的PVSK水凝胶的平衡溶胀比随NaCl溶液离子强度的增大而减小,在pH2.39～10.83范围内基本不受溶液pH的影响;经不同离子强度和pH的NaCl溶液充分溶胀的PVSK水凝胶具有良好的机械性能,在非接触的直流电场作用下,该水凝胶向电场负极弯曲,凝胶的弯曲速度和弯曲偏转量随外加电场强度的增加而增大,随NaCl溶液离子强度的增大出现临界最大值,但不随溶液pH(2.08～10.53)的改变而改变;在循环电场作用下,PVSK水凝胶的电机械化学行为具有良好的可逆性.     

不同引发剂引发SBS接枝马来酸酐的机理研究

采用FTIR和1 H NMR研究了引发剂过氧化二苯甲酰 (BPO)和偶氮二异丁腈 (AIBN)对聚苯乙烯 聚丁二烯 聚苯乙烯 (SBS)接枝马来酸酐 (MAH)的影响 ,讨论了相应的接枝机理 ,通过丁二烯 (PB)段碳碳双键(CC)随接枝率变化的规律进一步验证了机理 .结果表明 ,BPO与AIBN引发接枝的机理不同 ,BPO可引发PB的双键和烯丙位碳氢键 ,但引发烯丙位的速率比引发双键大 ;当BPO浓度达到一定量时 ,大量烯丙位的引发保护了碳碳双键 ,随BPO浓度的增大 ,碳碳双键的含量先减少后增加 .AIBN不能引发PB段烯丙位的碳氢键 ,只能引发双键接枝