Effect of polarization on laser-induced surface-temperature rise

A model was developed to investigate the effect of polarization on laser-induced surface-temperature rise in absorbing materials. GaAs is taken as a substrate material in this study. The polarization was found to significantly affect the laser-induced temperature rise on the substrate surface. This is due to the different surface absorption for the beams with different polarization directions. The laser beam with p polarization can induce higher temperature rise than that with s polarization. If the substrate has a high imaginary value in the complex refractive index, the peak laser-induced surface temperature falls concurrently. A similar effect of polarization to the laser-induced surface temperature rise can be expected to all other absorbing materials.     

Laser-induced quadrupoleben quadrupole collisional energy transfer in Xe-Kr

By considering the relative velocity distribution function and multipole expansion interaction Hamiltonian, a three-state model for calculating the cross section of laser-induced quadrupole-quadrupole collisional energy transfer is presented. Calculated results in Xe-Kr system show that in the present system, the laser-induced collision process occurs for ~4 ps, which is much shorter than the dipole-dipole laser-induced collisional energy transfer (LICET) process. The spectrum of laser-induced quadrupole-quadrupole collisional energy transfer in Xe-Kr system has wider tunable range in an order of magnitude than the dipole-dipole LICET spectra. The peak cross section decreases and moves to the quasi-static wing with increasing temperature and the full width at half peak of the profile becomes larger as the system temperature increases.     

Analysis of thermal radiation from laser-heated nanoparticles formed by laser-induced decomposition of ferrocene

Thermal radiation, originating from laser-heated gas-phase nanoparticles, was detected in the 400–700 nm wavelength range by means of optical emission spectroscopy. The particles were formed upon laser-induced photolytic decomposition of ferrocene (Fe(C₅H₅)₂) and consisted of an iron core surrounded by a carbon shell. The laser-induced excitation was performed as the particles were still within the reactor zone, and the temperature of the particles could be determined from thermal emission. Both the temperature of the nanoparticles and the relative intensity changes of the emission were monitored as a function of time (with respect to the laser pulse), laser fluence and Ar ambient pressure. At high laser fluences, the particles reached high temperatures, and evidence was found for boiling of iron. Modeling of possible energy-releasing mechanisms such as black-body radiation, thermionic electron emission, evaporation and heat transfer by the ambient gas was also performed. The dominant cooling mechanisms at different ranges of temperature were clarified, together with a determination of the accommodation factor for the Ar–nanoparticle collisions. The strong evaporation at elevated temperatures also led to significant iron loss from the produced particles. PACS 61.46.+w; 81.16.Mk; 65.80.+n     

A new method of flame temperature measurement utilizing the acoustic emissions from laser-induced plasmas

The optical emissions from laser-induced plasmas have been successfully exploited for elemental composition measurements in flames; however, the information from the accompanying plasma-generated acoustic emissions has not been well utilized. In this study, we investigated the influence of flame temperature and composition on the acoustic emissions from laser-induced plasmas in an ethylene-air premixed flame. The acoustic emissions are sensitive to temperature, and a negative correlation can be established. The effect of composition on acoustic emissions was found to be second order compared to that of temperature. Based on these findings, we introduce acoustic-based laser-induced breakdown thermometry (LIBT). A statistical analysis was performed to mitigate the bias introduced by anomalous extreme values. The spatial and temporal resolution of LIBT were also analyzed to demonstrate its potential to perform simultaneous composition and temperature measurements when used along with laser induced breakdown spectroscopy (LIBS). Finally, the temperature distribution in an ethylene-air counter-flow diffusion flame was measured; and the results compared favorably with numerical results.     

不同样品温度下聚焦透镜到样品表面距离对激光诱导铜击穿光谱的影响

研究了不同温度下聚焦透镜到样品表面距离对激光诱导击穿光谱(laser-induced breakdown spectroscopy,LIBS)强度的影响,使用Nd:YAG脉冲激光激发样品并产生等离子体,探测的等离子体发射的光谱线为Cu(Ⅰ)510.55 nm,Cu(Ⅰ)515.32 nm和Cu(Ⅰ)521.82 nm.使用透镜的焦距为200 mm,测量的聚焦透镜到样品表面距离的范围为170—200 mm,样品温度从25℃升高到270℃,激光能量为26 mJ.总体上,升高样品温度能有效地提高LIBS光谱的辐射强度.在25℃和100℃时,光谱强度随着聚焦透镜到样品表面距离的增加而单调增加;在样品温度更高(150, 200, 250和270℃)时,光谱强度随着距离的增加出现先升高而后又降低的变化.同时,在样品接近焦点附近,随着样品温度的升高,LIBS光谱强度的变化不明显,还可能出现光谱强度随着样品温度升高而降低的情况,这在通过升高样品温度来提高LIBS光谱强度中特别值得我们注意.为了更进一步了解这两个条件对LIBS的影响,计算了等离子体温度和电子密度,发现等离子体温度和电子密度的变化与光谱强度的变化几乎一致,更高样品温度下产生的等离子体温度和电子密度更高.     

Temperature measurement in fuel-rich non-sooting low-pressure hydrocarbon flames

Several temperature measurement techniques were compared for the investigation of fuel-rich, premixed, flat, low-pressure flames of propene, acetylene, and cyclopentene with maximum temperatures around 2400 K. Vibrational Stokes/anti-Stokes Raman measurements with a KrF excimer laser using CO, H₂, and H₂O as temperature indicators were examined at 50 and 200 mbar for different flame stoichiometries. Also, laser-induced fluorescence (LIF) of OH in the A-X band was used, and complementary lifetime measurements were performed to account for a variation of fluorescence quantum yield with rotational quantum number. LIF using seeded NO (0.2-1.0%) was applied both in point-wise and 1D temperature measurement in spite of the anticipated interaction of NO with the fuel-rich flame chemistry. Furthermore, thermocouple measurements were performed in the preheat zone. These techniques were compared with respect to accuracy and the potential for routine applications under fuel-rich low-pressure conditions.     

Expedited laser damage profiling of KDxH(2-x)PO4 with respect to crystal growth parameters

We investigate the laser-induced damage resistance at 355 nm in deuterated potassium dihydrogen phosphate (DKDP) crystals grown with varying growth parameters, including speed of growth and temperature. The aim is to explore a new expedited method to study the growth parameters affecting the laser-induced damage resistance in DKDP material to obtain crystals with enhanced performance.     

Application of laser-induced breakdown spectroscopy to the analysis of metals in soils

In this paper, the influence of plasma temperature on quantitative laser-induced breakdown spectroscopy (LIBS) measurements is discussed, and a simple theoretical approach is used to model the plasma generation. It is shown that an estimate of the temperature of the laser-induced plasma and its inclusion in a model for line emission allows for substantial reduction of the matrix effect. To illustrate the benefits of the proposed correction, some experimental results, obtained with the use of some reference sample soils, are finally presented.     

Spatially,temporally, and spectrally resolved measurement of laser-induced plasma in air

Images and emission spectra of sparks produced by laser-induced breakdown in air were investigated with a high degree of spatial and temporal resolution. The laser-induced breakdown was generated by focusing a 532-nm nanosecond pulse from a Q-switched Nd:YAG laser. The data were collected using a framing intensified charged coupled device (CCD) camera and a multi-fiber Cassegrain optics system coupled to an intensified CCD spectrometer. The results provided information about the different stages of laser-induced breakdown. The plasma shape and emission spectrum were very reproducible. Different ionization levels in the plasma kernels, which were observed using the high spatial resolution of the multi-fiber Cassegrain optics system, occurred during the plasma formation and cooling and at different locations within the plasma. This was due mainly to the thickness of the plasma relative to the laser wavelength, which created different ionization levels and energy absorption rates throughout. These observations were correlated with the plasma visualizations obtained with the framing ICCD camera. The plasma emission analysis permitted us to study the temperature evolution along the plasma during the laser-induced breakdown process. The analysis demonstrated the validity of a laser-supported wave model during the first stages of laser-induced breakdown and illustrated the weak dependence of the plasma temperature on the input energy. PACS 52.50.Jm; 52.70.-m; 51.50.+v     

Laser-induced thermal effects on Si/SiO<Subscript>2</Subscript> free-standing superlattices

The thermal effects produced by continuous-wave laser radiation on free-standing Si/SiO₂ superlattices are studied. We compare two samples with different SiO₂ layer thicknesses (2 and 6 nm) and the same Si layer thickness (2 nm). The as-prepared free-standing superlattices contain some amount of Si nanocrystals (Si-nc). Intense laser irradiation at 488 nm of the as-prepared samples enhances the Raman scattering of Si-nc by two orders of magnitude. This laser-induced crystallization originates from melting of Si nanostructures in silica, which makes Si-nc better ordered and better isolated from the oxide surrounding. Continuous-wave laser control of Si-nc stress was achieved in these samples. In the proposed model, intense laser radiation melts Si-nc, and Si crystallization upon cooling down from the liquid phase in a silica matrix leads to compressive stress. The Si-nc stress can be tuned in the ∼3 GPa range using laser annealing below the Si melting temperature. The high laser-induced temperatures were verified with Raman spectroscopy. The laser-induced heat leads to a strongly nonlinear rise of light emission. The light emission is also observed in the anti-Stokes region, and its temperature dependence is practically the same for the two studied samples. The laser-induced temperature is essentially controlled by the absorbed laser power. PACS 78.55.-m; 78.20.-e; 68.55.-a; 78.30.-j     

Induced probe-beam modulation and resonatorless optical bistability in semiconductor (CdSxSe1−x)-doped glass

Induced probe-beam modulation in semiconductor-doped glass was observed. The dephasing between pump and probe modulation is dependent on the pump power, the modulation frequency and the selenium concentration. At room temperature, with a proper choice of these parameters, the dephasing can change from 0° (laser-induced clearing) to –180° (laser-induced darkening). A slow switching behaviour and optical bistability without external feedback are also reported.     

Annealing effects on structure and laser-induced damage threshold of Ta2O5/SiO2 dielectric mirrors

The effects of annealing on structure and laser-induced damage threshold (LIDT) of Ta₂O₅/SiO₂ dielectric mirrors were investigated. Ta₂O₅/SiO₂ multilayer was prepared by ion beam sputtering (IBS), then annealed in air under the temperature from 100 to 400 °C. Microstructure of the samples was characterized by X-ray diffraction (XRD). Absorption of the multilayer was measured by surface thermal lensing (STL) technique. The laser-induced damage threshold was assessed using 1064 nm free pulsed laser at a pulse length of 220 μs.

It was found that the center wavelength shifted to long wavelength gradually as the annealing temperature increased, and kept its non-crystalline structure even after annealing. The absorbance of the reflectors decreased after annealing. A remarkable increase of the laser-induced damage threshold was found when the annealing temperature was above 250 °C.     

不同波长三倍频DKDP晶体的激光损伤

采用传统降温法,利用高纯原料从氘化程度为80%的溶液生长了四方相磷酸二氘钾(DKDP)晶体,并按Ⅱ类三倍频方式切割晶体。三倍频用DKDP晶体的最大问题在于其抗光伤阈值低于KDP晶体,严重限制了激光输出的能量密度和晶体使用寿命。考察了不同波长下三倍频DKDP晶体的损伤阈值,以及激光退火效应。实验表明,激光退火对于DKDP晶体的损伤阈值有显著的提升作用,基频、倍频、三倍频的提升效果分别达到1.4,1.9,2.7倍,是改善DKDP晶体抗光伤能力的有效途径。     

Measurements of plasma temperature and electron density in laser-induced copper plasma by time-resolved spectroscopy of neutral atom and ion emissions

Plasma produced by a 355 nm pulsed Nd:YAG laser with a pulse duration of 6 ns focussed onto a copper solid sample in air at atmospheric pressure is studied spectroscopically. The temperature and electron density characterizing the plasma are measured by time-resolved spectroscopy of neutral atom and ion line emissions in the time window of 300–2000 ns. An echelle spectrograph coupled with a gated intensified charge coupled detector is used to record the plasma emissions. The temperature is obtained using the Boltzmann plot method and the electron density is determined using the Saha-Boltzmann equation method. Both parameters are studied as a function of delay time with respect to the onset of the laser pulse. The results are discussed. The time window where the plasma is optically thin and is also in local thermodynamic equilibrium (LTE), necessary for the laser-induced breakdown spectroscopy (LIBS) analysis of samples, is deduced from the temporal evolution of the intensity ratio of two Cu I lines. It is found to be 700–1000 ns.     

Stimulated Raman scattering of lattice translational modes in liquid heavy water

A study was conducted on stimulated Raman scattering (SRS) when laser-induced plasma is formed in heavy water by focusing an intense picosecond pulsed Nd:YAG laser beam with wavelength 532 nm at room temperature. An unexpected 280 cm(-1) low frequency SRS line attributed to the lattice translational modes is observed. This SRS line and the internal-mode SRS lines indicate that the ice VII structure is formed in heavy water under the condition of laser-induced shockwave production.     

Finite element analysis of three-dimensional laser-induced transient thermal grating in diamond/ZnSe system

This paper uses finite element method to obtain the three-dimensional temperature field of laser-induced transient thermal grating （TTG） for two-layered structure of diamond film on ZnSe substrate. The numerical results indicate that unique two-times heating process is gradually experienced in the area between two adjacent grating stripes. However, there is a little change for the temperature field along the depth direction for the diamond film due to its great thermal conductivity. It further finds that the thickness of the diamond film has a significant influence on the temperature field in diamond/ZnSe system. The results are useful for the application of laser-induced TTG technique in film/substrate system.     

基于激光的燃烧场温度诊断方法综述

在燃烧相关的研究中,温度场、速度场、组分场、压力场的时空分布特性非常重要.为了计算热传导、热对流和热辐射或捕捉火焰区域,最直接的方法是获取燃烧场的温度.近年来,基于激光的非接触诊断技术快速发展,Rayleigh散射温度测量、激光诱导荧光、激光诱导磷光、Raman散射测温法、相干反Stokes Raman散射、简并四波混频、可调谐二极管激光吸收光谱等技术已经被成功地应用在温度诊断研究中.文章综述了上述激光测温技术的基本工作原理和应用条件,为从事相关领域工作的研究人员提供一定的参考.      

双飞秒激光脉冲诱导击穿光谱增强特性研究

在大气环境中,以钴为样品,通过单脉冲飞秒激光诱导击穿光谱及共轴双飞秒脉冲激光诱导击穿光谱的对比实验,研究了双脉冲激光诱导击穿光谱的谱线增强机制,测量了双脉冲激光诱导击穿光谱随脉冲时间间隔的变化趋势。结果表明,在最优化的脉冲时间间隔条件下,双脉冲激光诱导等离子体光谱获得明显增强。进一步,通过线性Boltzmann法得出了电子温度随脉冲时间间隔的演化,发现了谱线增强因子和电子温度随脉冲时间间隔呈现出相同的演化趋势,并经历两个明显的变化过程,得出了谱线信号强度的增强依赖于电子温度升高的结论。     

Laser diagnostics of NO reburning in fuel-rich propene flames

Absolute NO concentrations were measured by laser-induced fluorescence (LIF) in three different fuel-rich non-sooting propene flames (φ=1.5, 1.8 and 2.3). The experiments were performed in low-pressure premixed propene flames with 0.2%-1% NO added. Laser diagnostics was applied as a tool for investigating reburn chemistry. The Q₂(25.5) line in the A-X(0,0) band was excited because of the small temperature dependence of its ground state population. The NO fluorescence lifetimes were measured directly and compared to theoretical values. The initial NO levels are strongly reduced in all three flames. According to modeling results, the HCN mole fraction increases strongly with stoichiometry. As guidelines for laser diagnostics applications in such systems, the modeling results were analyzed with respect to the main reaction channels and reaction partners in fuel-rich flames. Received: 1 March 2000 / Revised version: 20 April 2000 / Published online: 20 September 2000     

Experimental investigation of ablation efficiency and plasma expansion during femtosecond and nanosecond laser ablation of silicon

Femtosecond laser (Ti:sapphire, 100 fs pulse duration) ablation of silicon in air was compared with nanosecond laser (Nd:YAG, 3 ns pulse duration) ablation at ultraviolet wavelength (266 nm). Laser ablation efficiency was studied by measuring crater depth as a function of pulse number. For the same number of laser pulses, the fs-ablated crater was about two times deeper than the ns-crater. The temperature and electron number density of the laser-induced plasma were determined from spectroscopic measurements. The electron number density and temperature of fs-induced plasmas decreased faster than ns-induced plasmas due to different energy deposition mechanisms. Images of the laser-induced plasma were obtained with femtosecond time-resolved laser shadowgraph imaging. Plasma expansion in both the perpendicular and the lateral directions were compared. PACS 52.38.Mf; 52.30.-q