ZSM-5的水热改性及其在合成气经二甲醚制汽油中的应用

对合成气经二甲醚制汽油两段等压反应系统中的ZSM-5分子筛催化剂进行原位水热处理,研究了不同温度下水蒸气处理ZSM-5分子筛的结构、表面酸性及催化反应性能。XRD、XRF、BET、NH₃-TPD 和 TPO等表征手段表明,水热处理温度为400℃时会使ZSM-5分子筛大部分非骨架铝脱除,酸中心数量减少,比表面积增加,提高了催化剂的活性及产物选择性。     

几种分子筛催化剂对丁烯-2齐聚反应的催化性能

采用连续固定床反应器,考察了几种具有不同酸性和孔道尺寸的分子筛催化剂上丁烯-2齐聚反应的性能,并与固体磷酸(SPA)催化剂进行了对比.结果表明,分子筛催化剂的酸性和孔道尺寸是影响丁烯-2齐聚反应活性和选择性的重要因素.具有八元环孔道的分子筛的扩散阻力大,反应活性很低;十二元环分子筛的孔道降低了扩散阻力,有利于提高催化剂的低温活性和C9= 选择性;十元环分子筛的孔道尺寸和强酸中心可以提高催化剂的活性,促进C9= 生成.SPA催化剂上C9= 选择性低于30%,而具有强酸中心的十元环ZSM-5和ZSM-22分子筛,以及十二元环β分子筛催化剂上可高达50%以上,这说明分子筛催化剂具有更好的齐聚催化性能.     

ZSM-5/ZSM-57复合分子筛催化剂上混合C4烃的催化转化反应

以ZSM-5/ZSM-57复合分子筛为催化剂, 考察了其对混合C4烃催化转化的反应性能. 采用氨程序升温脱附(NH3-TPD)和吡啶吸附傅立叶变换红外(FT-IR)光谱技术表征复合分子筛的酸性质. 结果表明, 当复合分子筛中ZSM-5的含量较低时, 比ZSM-5具有更高的催化活性及乙烯和丙烯选择性, 这是因为此时复合分子筛酸强度较高、酸量较多, 且小孔ZSM-57有利于乙烯和丙烯的择形反应. 而当复合分子筛中ZSM-5的含量较高时, 具有较高的苯和甲苯选择性, 其原因可能是其孔结构及共晶生长时的结构匹配性对芳构化反应有利.     

ZSM-5酸改性对甲醇芳构化性能的影响

利用硝酸、草酸和酒石酸溶液对ZSM-5分子筛进行改性,并采用XRD、SEM、NH₃-TPD、XRF、²⁷Al MAS NMR、吡啶吸附红外光谱和N₂吸附-脱附对ZSM-5分子筛结构、酸量、比表面积及孔体积等物化性质进行表征分析。在反应温度为422℃,甲醇质量空速为4.74 h^-1的条件下,考察了ZSM-5分子筛的催化活性。结果表明,采用不同酸改性ZSM-5分子筛,影响了分子筛的比表面积、酸性及孔体积,从而改变了催化剂的催化性能。在甲醇芳构化（MTA）反应中,酸改性后的分子筛表现出良好的催化活性,且草酸改性后的催化剂表现出较高的催化活性及选择性,反应8 h时,芳烃及BTX收率分别达到57.40%和39.40%。     

ZSM-5分子筛晶粒尺寸对C4烯烃催化裂解制丙烯的影响

 采用水热法合成了晶粒尺寸分别为20～30,1～2和0.2～0.3 μm的三种ZSM-5分子筛样品,并用SEM,XRD,氮低温物理吸附,NH3-TPD和TGA等技术对ZSM-5分子筛进行了表征,以考察其晶粒尺寸对C4烯烃裂解生产丙烯过程中催化剂活性和稳定性的影响. 结果表明,在常压,WHSV=10 h-1和550 ℃的条件下,以ZSM-5分子筛为催化剂,通过C4烯烃的催化裂解可以获得高收率的丙烯,反应初期丙烯的单程收率可达38%; 尽管三种晶粒尺寸的分子筛具有相近的比表面积和总酸量,但小晶粒的ZSM-5分子筛(粒径0.2～0.3 μm)具有微孔短、外比表面积大和孔口多等特点,因而表现出较强的容积炭能力和较好的稳定性; 小晶粒的ZSM-5分子筛催化剂经过10次再生重复使用,其催化生成丙烯的收率没有明显降低.     

ZSM-5分子筛催化剂稳定性的研究

为观察C₄烯烃转化制丙烯过程中影响催化剂稳定性的因素，对经历不同反应时间（即新鲜、反应48h、反应650h、反应650h后再生和再生后再进行反应48h）的系列ZSM-5分子筛催化剂进行了表征。结果表明，经历长期反应后，催化剂微孔体积和BJH吸附累积孔体积明显降低；再生后，孔体积可以恢复到新鲜催化剂的初始值。与此同时，NH₃-TPD酸量不仅降低，而且再生后也不能得到恢复。与高温水蒸气处理的催化剂相比较，²7Al MAS NMR表征结果说明，积炭因素对催化剂孔体积的影响可通过再生消除，而分子筛骨架铝丢失和分子筛晶胞参数的降低对催化剂酸量的持续减少起主要作用。长期在高温水蒸气条件下运行后，催化剂酸量可维持在一定水平，使催化剂长期稳定运行成为可能。     

不同晶粒ZSM-5沸石分子筛对合成气羰基化反应性能的影响

对沸石分子筛而言,分子筛的孔道、孔径、孔容和微孔等物理性质和酸性影响它的活性.通过调节和控制以上物理性质能够提高产物选择性和收率,降低副产物,从而促进反应性能提高活性.我们考察了ZSM-5分子筛的晶粒度和硅铝比对合成气羰基化反应性能的影响.结果表明,晶粒度小及具有一定比例的中强酸中心的ZSM-5沸石分子筛对反应有利,但晶粒度比较大即1和3μm的ZSM-5沸石分子筛目标产物选择性比较低.纳米级的ZSM-5沸石分子筛催化剂在反应中表现出较高的活性及较低的副产物选择性,是适宜的合成气羰基化反应催化剂载体.温度考察结果可知,反应温度为300℃时,效果为最佳.其中, 30～50 nm的ZSM-5沸石分子筛催化剂CO转化率为55%,乙酸甲酯和甲酸甲酯选择性之和为52%,而晶粒度3μm时, CO转化率仅为25%,乙酸甲酯和甲酸甲酯选择性之和为20%,是30～50 nm沸石分子筛的一半.当反应继续升温时,副产物的选择性也随之增加,是因为所生成的中间产物和甲醇等继续进行各种反应生成二甲醚、芳烃、烷烃以及裂解生成CO_2等干气.     

不同粒径ZSM-5分子筛在苯与甲醇烷基化反应中催化性能及反应条件优化

采用水热合成法合成了不同粒径的ZSM-5分子筛催化剂,系统考察了分子筛粒径变化对苯与甲醇烷基化反应的影响。研究结果表明,随着ZSM-5分子筛粒径增大,不但苯的转化率和二甲苯选择性降低,而且催化剂稳定性明显下降。其中,粒径为0.25 μm的ZSM-5分子筛在苯烷基化反应中的催化性能最佳,且催化剂稳定性最好。另外,采用拉曼光谱和热重等方法对催化剂积碳物种和失活机理进行了深入研究,发现催化剂失活主要是由于反应过程中生成的大分子稠环芳烃堵塞了分子筛孔道并覆盖活性位点造成的。最后,考察了反应温度、原料组成及空速对苯烷基化反应的影响并优化出最佳的苯烷基化反应条件。     

无粘结剂ZSM-11催化剂上异丁烯直接胺化生成叔丁胺

叔丁胺是一种重要的化工原料和中间体,广泛应用于制备橡胶促进剂、医药、农药和着色剂等下游产品.异丁烯在分子筛催化剂上直接胺化生产叔丁胺是一个经济环保过程,其中ZSM-5和BEA分子筛的催化性能优于其它系列分子筛.ZSM-11与ZSM-5分子筛具有相似的孔道结构,我们以前的实验结果表明,与ZSM-5相比,ZSM-11表现出更优越的芳构化反应性能,在干气中乙烯低温芳构化方面也有明显优势.在此基础上,我们进行无粘结剂ZSM-11分子筛催化剂合成,并应用于异丁烯直接胺化生产叔丁胺反应.传统水热技术合成的分子筛通常为粉末,机械强度不能达到实际应用的要求,在工业化过程中分子筛粉末一般需要加入粘结剂成型使其具备一定的机械强度和形状,但是粘结剂会降低分子筛催化剂的活性和选择性,有可能会引发一些副反应,因此无粘结剂分子筛催化剂引起人们广泛关注.无粘结剂分子筛是指分子筛颗粒中不含惰性粘结剂或只含有少量粘结剂,主要依靠分子筛晶粒间的相互作用支撑存在,具有一定形状、尺寸和机械强度的催化材料.无粘结剂分子筛催化剂中分子筛含量较高,可利用的有效表面积较大,在离子交换及工业催化等方面具有明显优势.本文采用水热合成的ZSM-11分子筛原粉与二氧化硅机械混合(ZSM-11/SiO2=70/30)挤条后,通过气固相合成法制备了无粘结剂ZSM-11分子筛催化剂(Cat-C).作为对比,还分别制备了ZSM-11和SiO2机械混合(ZSM-11/SiO2=70/30)样品HZSM-11+SiO2及ZSM-11和氧化铝机械混合(ZSM-11/Al2O3=70/30)样品HZSM-11+Al2O3.利用X射线衍射、透射电镜、NH3程序升温脱附和吸附吡啶红外光谱等对分子筛催化剂的物理化学性能进行了表征.同时,以这些分子筛样品为催化剂,在固定床反应装置上进行了异丁烯胺化反应评价,反应条件为270℃,5.0 MPa,氨烯比为4和异丁烯空速0.5 h?1.结果表明,与HZSM-11+SiO2和HZSM-11+Al2O3相比,Cat-C上叔丁胺生成速率最高.关联催化剂物化性能和反应性能发现,催化剂孔道结构与叔丁胺生成并不存在明显的关联性,而较多的Br?nsted酸和较少的Lewis酸才是Cat-C具有良好反应性能的主要原因.具有一定机械强度的无粘结剂ZSM-11分子筛催化剂制备简单,在异丁烯直接胺化过程中叔丁胺生成速率高,具有很好的工业化应用前景.     

甘油脱水合成丙烯醛ZSM-5催化剂的孔结构和酸性调控

研究了ZSM-5 孔结构和表面酸性对甘油脱水合成丙烯醛反应性能的影响. 在碱浓度为0.2 mol·L^-1的NaOH溶液中, 分别在65和85 ℃条件下对ZSM-5进行化学刻蚀, 成功地制备了含微介孔的ZSM-5催化剂, 提高了催化剂的表面强酸密度. 碱处理后的ZSM-5催化剂在甘油脱水反应中的稳定性得到显著提高, 在ZSM-5-at85 (经85 ℃碱处理的ZSM-5)催化剂上甘油转化率在反应10 h 后仍可保持95%以上, 丙烯醛选择性达到78%. 采用N₂吸附-脱附等温线、X射线粉末衍射(XRD)、²⁷Al 固体核磁共振(²⁷Al MAS-NMR)和透射电子显微镜(TEM)等手段对ZSM-5 结构和表面性质进行了表征, 实验结果表明在碱处理过程中骨架中的硅发生了溶脱现象, 在分子筛表面上形成了大量介孔, 但是ZSM-5 的MFI 拓扑结构没有发生变化, 骨架中的大部分铝得到保持. X射线光电子能谱(XPS)、X射线荧光光谱(XRF)和氨气程序升温脱附(NH₃-TPD)证实了在碱处理后ZSM-5分子筛外表面的Si/Al 摩尔比低于其骨架中的比例, 由此表明脱硅现象主要发生在ZSM-5 的外表面, 在新产生的介孔区域由于Si/Al 摩尔比的降低使得强酸密度得到提高. 具有微介孔结构和较高酸密度的ZSM-5催化剂增强了反应物扩散性能和容碳能力, 这对于提高甘油脱水合成丙烯醛催化剂的活性和稳定性起到了关键作用.     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

Synthesis of phenolic components of Grains of Paradise

Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.     

Summary of development of the theory of stability of colloids and thin films

In this review, the research of the author in the field of colloidal systems is summarized. The factors influencing colloidal stability are systematized and analyzed. Examples are presented to illustrate the practical utilization of the theory of stability of colloids and thin films.This review was prepared on the basis of the works of the author, which were awarded the State Premium for 1991 in the field of science and technology, chemistry section.Institute of Physical Chemistry, Russian Academy of Sciences, 117915 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 8, pp. 1708–1717, August, 1992.     

Study of hydration of two cements of different strengths

Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, M_o, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700^oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date.     

氯氧化镁生成热的研究

用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。     

Thermodynamics of the formation of oxosulfides of rare-earth elements

The enthalpies of solution of several oxosulfides of rare-earth elements and the high-temperature enthalpies of oxosulfides and oxosulfates of lanthanum and yttrium were measured using solution calorimetry and high-temperature microcalorimetry techniques. Standard enthalpies of formation and some thermodynamic properties of oxosulfides and oxosulfates were calculated. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2 pp. 294–297, February, 1997.     

探究“铁的锈蚀条件”实验创新设计

设计了铁的锈蚀实验,说明了铁钉的处理方法,增加了温度、酸、碱的影响条件,实现了铁跟蒸馏水及空气中氧气快速反应而生锈,使实验在5 min左右就能够得到准确的结果。