Intra- and intermembrane pairwise molecular recognition between synthetic hydrogen-bonding phospholipids

Multivalency and preorganization are fundamental aspects of molecular recognition at the lipid membrane-water interface and can render weak monomeric binding interactions selective and robust; this concept is important throughout biology, biotechnology, and materials science. Though hydrogen bonding is typically weakened in water, intramembrane hydrogen bonding between native lipids has been well-studied and is thought to contribute to lipid bioactivity and membrane function. We hypothesized that avidity and preorganization effects at the lipid-water interface could overcome solvent competition and allow for selective hydrogen-bond recognition between small, unstructured components. We have found that electrostatically identical vesicular membranes composed of cyanuric acid and melamine functionalized phospholipids 1 and 2 undergo selective apposition, fusion and adhesion in suspension and on solid support, indicating that their well-known low-dielectric hydrogen bonding properties translate effectively to the lipid-water interface. This work is notable and of general interest given the few detailed studies of aqueous phase hydrogen-bonding systems; we have extensively characterized this system, gaining structural, functional, and thermodynamic data. Furthermore, we have found that the designed lipid-lipid headgroup interactions result in dramatic alteration of the lipid phase morphology, providing insight into the coupling of molecular interactions with assembly state. As such, this work contributes to our understanding of fundamental phenomena such as molecular recognition at the lipid-water interface membrane chemistry and further illustrates the general possibility of designing selective hydrogen-bonding adhesive interactions from simple starting materials at other polar-apolar interfaces; this could have numerous materials and biotechnological applications.     

Biomolecular engineering by combinatorial design and high-throughput screening: small, soluble peptides that permeabilize membranes

Rational design and engineering of membrane-active peptides remains a largely unsatisfied goal. We have hypothesized that this is due, in part, to the fact that some membrane activities, such as permeabilization, are not dependent on specific amino acid sequences or specific three-dimensional peptide structures. Instead they depend on interfacial activity: the ability of a molecule to partition into the membrane-water interface and to alter the packing and organization of lipids. Here we test that idea by taking a nonclassical approach to biomolecular engineering and design of membrane-active peptides. A 16,384-member rational combinatorial peptide library, containing peptides of 9-15 amino acids in length, was screened for soluble members that permeabilize phospholipid membranes. A stringent, two-phase, high-throughput screen was used to identify 10 unique peptides that had potent membrane-permeabilizing activity but were also water soluble. These rare and uniquely active peptides do not share any particular sequence motif, peptide length, or net charge, but instead they share common compositional features, secondary structure, and core hydrophobicity. We show that they function by a common mechanism that depends mostly on interfacial activity and leads to transient pore formation. We demonstrate here that composition-space peptide libraries coupled with function-based high-throughput screens can lead to the discovery of diverse, soluble, and highly potent membrane-permeabilizing peptides.     

Comparison between RGD-peptide-modified titanium and borosilicate surfaces

The use of synthetic peptides containing adhesive sequences, such as the Arg-Gly-Asp (RGD) motif, represents a promising strategy to control biological interactions at the cell–material interface. These peptides are known to improve the tissue–material contact owing to highly specific binding to cellular membrane receptors known as integrins, thereby promoting the adhesion, migration and proliferation of cells. The peptides were coupled to borosilicate glass and titanium surfaces using silanisation chemistry. A tryptophan residue was incorporated into the amino acid sequences of selected peptides to facilitate the detection of the covalently bound peptides. Successful peptide immobilisation was proven by fluorimetric measurements. The confocal imaging analysis suggests a homogeneous distribution of the immobilised peptide across the biomaterial surface. In vitro cell proliferation assays were employed to compare the adhesion potentials of the well-known RGD-containing peptides GRGDSP, GRADSP and RGDS to the three peptides designed by our group. The results demonstrate that the RGD sequence is not necessarily required to enhance the adhesion of cells to non-biological surfaces. Moreover, it is shown that the number of adhering cells can be increased by changes in the peptide hydrophobicity. Changes in the cytoskeleton are observed depending on the type of RGD-peptide modification.     

Functional determinants of a synthetic vesicle fusion system

Selective membrane mergers may be driven by small-molecule recognition between synthetic surface-displayed fusogens which bear vancomycin glycopeptide and its native binding target, D-Ala-D-Ala dipeptide. These recognition motifs are membrane anchored by antimicrobial peptide magainin II and a phosphatidylethanolamine lipid derivative, respectively. We report herein characterization of this synthetic membrane fusion reaction with regard to the following: effects of fusogen concentration, lipid composition, and membrane charge. Our findings indicate that these parameters are determinants of fusion rate, vesicle stability, peptide binding, catalytic fusion and membrane disruption during fusion. Notably, these data indicate the importance of coupling between molecular recognition and insertion for bilayer activation as well as the critical role of membrane subdomain formation for membrane fusion reactivity. These phenomena are general to lipid membrane chemistry, and therefore these findings provide a guideline for understanding more complex biomembrane systems.     

Cell-Penetrating Peptides: Correlation between Peptide-Lipid Interaction and Penetration Efficiency

Cell-penetrating peptides are used in the delivery of peptides and biologics, with some cell-penetrating peptides found to be more efficient than others. The exact mechanism of how they interact with the cell membrane and penetrate it, however, remains unclear. This study attempts to investigate the difference in free energy profiles of three cell-penetrating peptides (TAT, CPP1 and CPP9) with a model lipid bilayer (DOPC) using molecular dynamics pulling simulations with umbrella sampling. Potential mean force (PMF) and free energy barrier between the peptides and DOPC are determined using WHAM analysis and MM-PBSA analysis, respectively. CPP9 is found to have the smallest PMF value, followed by CPP1 and TAT, consistent with the experimental data. YDEGE peptide, however, does not give the highest PMF value, although it is a non-cell-permeable peptide. YDEGE is also found to form water pores, alongside with TAT and CPP9, suggesting that it is difficult to distinguish true water pore formation from artefacts arising from pulling simulations. On the contrary, free energy analysis of the peptide-DOPC complex at the lipid-water interface with MM-PBSA provides results consistent with experimental data with CPP9 having the least interaction with DOPC and lowest free energy barrier, followed by CPP1, TAT and YDEGE. These findings suggest that peptide-lipid interaction at the lipid-water interface has a direct correlation with the penetration efficiency of peptides across the lipid bilayer.     

Antimicrobial activity and protease stability of peptides containing fluorinated amino acids

Selective fluorination of peptides results in increased chemical and thermal stability with simultaneously enhanced hydrophobicity. We demonstrate here that fluorinated derivatives of two host defense antimicrobial peptides, buforin and magainin, display moderately better protease stability while retaining, or exhibiting significantly increased bacteriostatic activity. Four fluorinated analogues in the buforin and two in the magainin series were prepared and analyzed for (1) their ability to resist hydrolytic cleavage by trypsin; (2) their antimicrobial activity against both gram-positive and gram-negative bacterial strains; and (3) their hemolytic activity. All but one fluorinated peptide (M2F5) showed retention, or significant enhancement, of antimicrobial activity. The peptides also showed modest increases in protease resistance, relative to the parent peptides. Only one of the six fluorinated peptides (BII1F2) was degraded by trypsin at a slightly faster rate than the parent peptide. Hemolytic activity of peptides in the buforin series was essentially null, while fluorinated magainin analogues displayed an increase in hemolysis compared to the parent peptides. These results suggest that fluorination may be an effective strategy to increase the stability of biologically active peptides where proteolytic degradation limits therapeutic value.     

Molecular dynamics simulations of the interactions of kinin peptides with an anionic POPG bilayer

We have performed molecular dynamics simulations of peptide hormone bradykinin (BK) and its fragment des-Arg9-BK in the presence of an anionic lipid bilayer, with an aim toward delineating the mechanism of action related to their bioactivity. Starting from the initial aqueous environment, both of the peptides are quickly adsorbed and stabilized on the cell surface. Whereas BK exhibits a stronger interaction with the membrane and prefers to stay on the interface, des-Arg9-BK, with the loss of C-terminal Arg, penetrates further. The heterogeneous lipid-water interface induces β-turn-like structure in the otherwise inherently flexible peptides. In the membrane-bound state, we observed C-terminal β-turn formation in BK, whereas for des-Arg9-BK, with the deletion of Arg9, turn formation occurred in the middle of the peptide. The basic Arg residues anchor the peptide to the bilayer by strong electrostatic interactions with charged lipid headgroups. Simulations with different starting orientations of the peptides with respect to the bilayer surface lead to the same observations, namely, the relative positioning of the peptides on the membrane surface, deeper penetration of the des-Arg9-BK, and the formation of turn structures. The lipid headgroups adjacent to the bound peptides become substantially tilted, causing bilayer thinning near the peptide contact region and increase the degree of disorder in nearby lipids. Again, because of hydrogen bonding with the peptide, the neighboring lipid's polar heads exhibit considerably reduced flexibility. Corroborating findings from earlier experiments, our results provide important information about how the lipid environment promotes peptide orientation/conformation and how the peptide adapts to the environment.     

Membrane binding and structure of de novo designed alpha-helical cationic coiled-coil-forming peptides.

We introduce a de novo designed peptide model system that enables the systematic study of 1) the role of a membrane environment in coiled-coil peptide folding, 2) the impact of different domains of an alpha-helical coiled-coil heptad repeat on the interaction with membranes, and 3) the dynamics of coiled-coil peptide-membrane interactions depending on environmental conditions. Starting from an ideal alpha-helical coiled-coil peptide sequence, several positively charged analogues were designed that exhibit a high propensity toward negatively charged lipid membranes. Furthermore, these peptides differ in their ability to form a stable alpha-helical coiled-coil structure. The influence of a membrane environment on peptide folding is studied. All positively charged peptides show strong interactions with negatively charged membranes. This interaction induces an alpha-helical structure of the former random-coil peptides, as revealed by circular dichroism measurements. Furthermore, vesicle aggregation is induced by a coiled-coil interaction of vesicle-bound peptides. Dynamic light scattering experiments show that the strength of vesicle aggregation increases with the peptide's intrinsic ability to form a stable alpha-helical coiled coil. Thus, the peptide variant equipped with the strongest inter- and intra-helical coiled-coil interactions shows the strongest effect on vesicle aggregation. The secondary structure of this peptide in the membrane-bound state was studied as well as its effect on the phospholipids. Peptide conformation within the peptide-lipid aggregates was analyzed by (13)C cross-polarization magic-angle spinning NMR experiments. A uniformly (13)C- and (15)N-labeled Leu residue was introduced at position 12 of the peptide chain. The (13)C chemical shift and torsion angle measurements support the finding of an alpha-helical structure of the peptide in its membrane-bound state. Neither membrane leakage nor fusion was observed upon peptide binding, which is unusual for amphiphatic peptide structures. Our results lay the foundation for a systematic study of the influence of the alpha-helical coiled-coil folding motif in membrane-active events on a molecular level.     

Membrane activation: selective vesicle fusion via small molecule recognition

We report herein the induction of selective vesicle fusion with biological recognition motifs not natively associated with lipid bilayer fusion, thus broadening the scope of recognition-guided membrane activation. Our system employs vancomycin glycopeptide, coupled to the antimicrobial peptide magainin, and D-Ala-D-Ala-OH dipeptide coupled to a phospholipid derivative, as surface-bound fusogens. Fusion was characterized by dynamic light scattering and FRET experiments with lipid bound fluorophores. We have demonstrated here that appropriately designed membrane anchored molecular recognition motifs have the biomimetic ability to activate specific membrane mergers; this principle has resonance with goals in targeted chemical delivery and nanoscale compartmentalized chemistry.     

Membrane insertion of a lipidated ras peptide studied by FTIR,solid-state NMR,and neutron diffraction spectroscopy

Membrane binding of a doubly lipid modified heptapeptide from the C-terminus of the human N-ras protein was studied by Fourier transform infrared, solid-state NMR, and neutron diffraction spectroscopy. The 16:0 peptide chains insert well into the 1,2-dimyristoyl-sn-glycero-3-phosphocholine phospholipid matrix. This is indicated by a common main phase transition temperature of 21.5 degrees C for both the lipid and peptide chains as revealed by FTIR measurements. Further, (2)H NMR reveals that peptide and lipid chains have approximately the same chain length in the liquid crystalline state. This is achieved by a much lower order parameter of the 16:0 peptide chains compared to the 14:0 phospholipid chains. Finally, proton/deuterium contrast variation of neutron diffraction experiments indicates that peptide chains are localized in the membrane interior analogous to the phospholipid chains. In agreement with this model of peptide chain insertion, the peptide part is localized at the lipid-water interface of the membrane. This is revealed by (1)H nuclear Overhauser enhancement spectra recorded under magic angle spinning conditions. Quantitative cross-peak analysis allows the examination of the average location of the peptide backbone and side chains with respect to the membrane. While the backbone shows the strongest cross-relaxation rates with the phospholipid glycerol, the hydrophobic side chains of the peptide insert deeper into the membrane interior. This is supported by neutron diffraction experiments that reveal a peptide distribution in the lipid-water interface of the membrane. Concurring with these experimental findings, the amide protons of the peptide show strong water exchange as seen in NMR and FTIR measurements. No indications for a hydrogen-bonded secondary structure of the peptide backbone are found. Therefore, membrane binding of the C-terminus of the N-ras protein is mainly due to lipid chain insertion but also supported by interactions between hydrophobic side chains and the lipid membrane. The peptide assumes a mobile and disordered conformation in the membrane. Since the C-terminus of the soluble part of the ras protein is also disordered, we hypothesize that our model for membrane binding of the ras peptide realistically describes the membrane binding of the lipidated C-terminus of the active ras protein.     

A de novo designed peptide ligase: a mechanistic investigation.

A 33-residue de novo designed peptide ligase is reported which catalyzes the template-directed condensation of suitably activated short peptides with catalytic efficiencies in excess of 10(5) ([k(cat)/K(m)]/k(uncat)). The ligase peptide, derived from natural and designed alpha-helical coiled-coil proteins, presents a surface for substrate assembly via formation of a hydrophobic core at the peptide interface. Charged residues flanking the core provide additional binding specificity through electrostatic complementarity. Addition of the template to an equimolar fragment solution results in up to 4100-fold increases in initial reaction rates. Dramatic decreases in efficiency upon mutation of charged residues or increase in ionic strength establishes the importance of electrostatic recognition to ligase efficiency. Although most of the increase in reaction efficiency is due to entropic gain from binding of substrates in close proximity, mechanistic studies with altered substrates demonstrate that the system is highly sensitive to precise ordering at the point of ligation. Taken together these results represent the first example of a peptide catalyst with designed substrate binding sites which can significantly accelerate a bimolecular reaction and support the general viability of alpha-helical protein assemblies in artificial enzyme design.     

Membrane-mediated capillary electrophoresis: interaction of cationic peptides with bicelles

Electrokinetic capillary chromatography is applied to determine the membrane affinity of peptides using both 1,2-dihexanoyl-sn-glycero-3-phosphocholine (DHPC) micelles and DHPC/1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) bicelles under controlled conditions. The effect of temperature and the bicelle q value in surface association with cationic peptides is studied. The cationic peptides selected have a well-defined membrane structure (indolicidin), induced secondary structure (melittin, magainin 2), or do not possess classical secondary structure (atrial natriuretic peptide (ANP) 1-28, 4-28, 5-27). Electrokinetic capillary chromatography facilitated by DMPC and DHPC additives provides a rapid means of estimating lipophilicity and screening for peptides that have membrane affinity.     

Hydroxyapatite surface-induced peptide folding

Herein, we describe the design and surface-binding characterization of a de novo designed peptide, JAK1, which undergoes surface-induced folding at the hydroxyapatite (HA)-solution interface. JAK1 is designed to be unstructured in buffered saline solution, yet undergo HA-induced folding that is largely governed by the periodic positioning of gamma-carboxyglutamic acid (Gla) residues within the primary sequence of the peptide. Circular dichroism (CD) spectroscopy and analytical ultracentrifugation indicate that the peptide remains unfolded and monomeric in solution under normal physiological conditions; however, CD spectroscopy indicates that in the presence of hydroxyapatite, the peptide avidly binds to the mineral surface adopting a helical structure. Adsorption isotherms indicate nearly quantitative surface coverage and Kd = 310 nM for the peptide-surface binding event. X-ray photoelectron spectroscopy (XPS) coupled with the adsorption isotherm data suggests that JAK1 binds to HA, forming a self-limiting monolayer. This study demonstrates the feasibility of using HA surfaces to trigger the intramolecular folding of designed peptides and represents the initial stages of defining the design rules that allow HA-induced peptide folding.     

Modeling peptide binding to anionic membrane pores

Peptide‐induced pore formation in membranes can be dissected into two steps: pore formation and peptide binding to the pore. A computational method is proposed to study the second step in anionic membranes. The electrostatic potential is obtained from numerical solutions to the Poisson–Boltzmann equation and is then used in conjunction with IMM1 (implicit membrane model 1). A double charge layer model is used to incorporate the effects of the membrane dipole potential. Inhomogeneity of the charge density in the pore, characterized by explicit membrane simulations of toroidal pores, is included in the model. This approach was applied to two extensively studied peptides, magainin and melittin. In agreement with previous work, binding to toroidal pores is more favorable than binding to the flat membrane. The dependence of binding energy on anionic content exhibits different patterns for the two peptides, in correlation with the different lipid selectivity that has been observed experimentally. © 2013 Wiley Periodicals, Inc.     

Understanding lipid recognition by protein-mimicking cyclic peptides

This paper describes our investigation of the structural determinants of a designed cyclic peptide (cLac, cyclic peptide mimicking lactadherin) (Zheng, H.; Wang, F.; Wang, Q.; Gao, J. J. Am. Chem. Soc.2011, 133, 15280–15283) for phosphatidylserine (PS) recognition. A highly efficient strategy that takes advantage of the native chemical ligation (NCL) chemistry has been developed for the synthesis and labeling of cyclic peptides in general. Ala scanning of the cLac peptide revealed a sophisticated model for PS binding, in which the peptide scaffold assembles multiple polar residues to balance the desolvation and electrostatic interactions (salt bridge and hydrogen bonding) to achieve lipid selectivity. The results suggest that cLac effectively mimics the membrane binding mechanism of the parent protein lactadherin.     

Antimicrobial peptides in action

Molecular dynamics simulations of the magainin MG-H2 peptide interacting with a model phospholipid membrane have been used to investigate the mechanism by which antimicrobial peptides act. Multiple copies of the peptide were randomly placed in solution close to the membrane. The peptide readily bound to the membrane, and above a certain concentration, the peptide was observed to cooperatively induce the formation of a nanometer-sized, toroidally shaped pore in the bilayer. In sharp contrast with the commonly accepted model of a toroidal pore, only one peptide was typically found near the center of the pore. The remaining peptides lay close to the edge of the pore, maintaining a predominantly parallel orientation with respect to the membrane.     

Thermodynamic study of small hydrophobic ions at the water-lipid interface

The thermodynamics of binding of two small hydrophobic ions such as norharman and tryptophan to neutral and negatively charged small unilamellar vesicles was investigated at pH 7.4 using fluorescence spectroscopy. Vesicles were formed at room temperature from dimyristoyl phosphatidylcholine (DMPC) or DMPC/dimyristoylphosphatidic acid and DMPC/dimyristoylphosphatidylglycerol. The changes in fluorescence properties were used to obtain association isotherms at variable membrane surface negative charge and at different ionic strengths. The binding of both ions was found to be quantitatively enhanced as the percentage of negative phospholipid increases in the membrane. Also, a decrease in ion binding was found to occur as the concentration of monovalent salt was increased (0.045-0.345 M). If electrostatic effects were ignored, the experimental data showed biphasic behavior in Scatchard plots. When electrostatic effects were taken into account by means of the Gouy-Chapman theory, the same data yielded linear Scatchard plots that were described by a simple partition equilibrium of the hydrophobic ion into the lipid-water interface. We demonstrate that the effective interfacial charge, nu, of the ion is a determinant factor to obtain a unique value of the intrinsic (hydrophobic) binding constant independently of the surface charge density of the lipid membrane.     

Transmembrane Signaling of T Lymphocytes by Ligand-Induced Receptor Complex Assembly

T lymphocytes (T cells) are the central cell type initiating all immune responses. They are able to recognize other cells in the body that have been invaded by foreign living or nonliving matter. In such cells, foreign peptides generated by intracellular breakdown are complexed with molecules of the major histocompatibility complex (MHC) specially designed for peptide binding. Peptide-loaded MHC molecules appear on the surface of these cells and alert the immune system. The molecular complex which T cells use for recognition of peptide-loaded MHC molecules is among the most sophisticated and versatile receptor systems in biology. It consists of specific and nonspecific transmembrane components which assemble to a functional signal transduction unit as the result of ligand binding. Correct assembly leads to activation and relocation of enzymes including membrane-associated, tyrosin-specific protein kinases and phosphatases. Transmembrane signaling in T cells depends on the correct assembly and cooperation among multiple molecular components. This may be related to a multitude of different cellular responses of T cells at different stages of differentiation, all elicited through the T cell receptor complex.     

Amphiphilic 4-helix bundles designed for biomolecular materials applications

Artificial peptides previously designed to possess alpha-helical bundle motifs have been either hydrophilic (i.e., soluble in polar media) or lipophilic (i.e., soluble in nonpolar media) in overall character. Realizations of these bioinspired bundles have succeeded in reproducing a variety of biomimetic functionality within the appropriate media. However, to translate their functionality into any biomolecular device applications at the macroscopic level, the bundles must be oriented in an ensemble, for example, at an interface. This goal has been realized in a new family of alpha-helical bundle peptides which are amphiphilic; namely, they assemble into 4-helix bundles with well-defined hydrophilic and hydrophobic domains. These peptides are capable of binding metalloporphyrin prosthetic groups at selected locations within these domains. We describe here the realization of one of the first members of this family, AP0, successfully designed for vectorial incorporation into soft interfaces between polar and nonpolar media.     

Synthesis and biological evaluation of two chemically modified peptide epitopes for the class I MHC protein HLA-B*2705

The T-cell receptor of a CD8(+) T-cell recognises peptide epitopes bound by class I major histocompatibility complex (MHC) glycoproteins presented in a groove on their upper surface. Within the groove of the MHC molecule are 6 pockets, two of which mostly display a high degree of specificity for binding amino acids capable of making conserved and energetically favourable contacts with the MHC. One type of MHC molecule, HLA-B*2705, preferentially binds peptides containing an arginine at position 2. In an effort to increase the affinity of peptides for HLA-B*2705, potentially leading to better immune responses to such a peptide, we synthesised two modified epitopes where the amino acid at position 2 involved in anchoring the peptide to the class I molecule was replaced with the alpha-methylated beta,gamma-unsaturated arginine analogue 2-(S)-amino-5-guanidino-2-methyl-pent-3-enoic acid. The latter was prepared via a multi-step synthetic sequence, starting from alpha-methyl serine, and incorporated into dipeptides which were fragment-coupled to resin-bound heptameric peptides yielding the target nonameric sequences. Biological characterisation indicated that the modified peptides were poorer than the native peptides at stabilising empty class I MHC complexes, and cells sensitised with these peptides were not recognised as well by cognate CD8(+) T-cells, where available, compared to those sensitised with the native peptide. We suggest that the modifications made to the peptide have decreased its ability to bind to the peptide binding groove of HLA-B*2705 molecules which may explain the decrease in recognition by cytotoxic T-cells when compared to the native peptide.