CoO/SrTiO3的合成及光催化分解水制氢性能

通过添加碱金属化合物矿化剂,以Sr(NO3)2和钛酸四丁酯的水解产物TiO(OH)2为原料进行固态反应,制得结晶完整性较好的SrTiO3粉末.再由浸渍法负载CoO,制备出光催化分解水催化剂CoO/SrTiO3,在400 W高压汞灯照射下,产氢速率可达到480μmol•g cat－1•h－1. SEM、UV-Vis漫反射光谱表征结果显示,合成SrTiO3时加入KOH矿化剂可使固态反应完全,SrTiO3结晶完整性提高,进而促进其光催化活性提高.确定了适宜的KOH矿化剂用量为2.0％(w).     

助剂调变对CoO／γ-Al2O3催化性能的影响

采用XRD、TPR和催化活性评价等技术,考察了负载型CoO催化剂的表面特征和其对CH4与CO2重整制合成气反应的催化性能.实验结果表明,采用浸渍法和焙烧温度为400℃时制备的11.0%CoO/γ-Al2O3催化剂,在反应温度为750 ℃和空速(GHSV)为2 500 h-1下,对CH4和CO2转化反应具有最佳的催化初活性,而大量的Co3O4晶粒的存在能导致催化剂因积炭而快速失去活性.CaO、MgO和La2O3助剂的添加能有效地改善其催化剂的抗积炭能力和还原性能,CoO/(CaO-γ-Al2O3)催化剂显示出最佳的催化反应稳定性,在750 ℃、GHSV=2 500 h-1、CH4/CO2原料比为1:1下,连续反应100 h催化剂活性较为稳定.CoO/(CaO-γ-Al2O3)和CoO/γ-Al2O3催化剂的表面特性本质上是不相同的.     

水热法制备氧化钇稳定的氧化锆纳米晶及水溶胶

以氧氯化锆为原料,以氨水作为沉淀剂,用NaOH调节pH并充当矿化剂,采用水热法制备了8%Y2O3稳定的ZrO2纳米粉体(YZS)及分散均匀的水溶胶;利用透射电子显微镜研究了反应温度、反应时间、体系pH、浆料浓度、有机添加剂丙三醇等对晶体形成过程的影响.结果表明,NaOH在调节产物矿化和控制反应体系pH方面具有重要作用;所制备的YZS样品晶粒分散均匀,粒径大约为7~8nm.     

高压下TiSi2可见光光热催化分解水制氢的研究

系统地研究了高压下一系列TiSi2催化剂的可见光光热催化分解水制氢行为.研究结果表明,压力增加显著提高了TiSi2催化剂光催化分解水制氢速率.添加NaOH和Na2CO3有利于水分解制氢的反应进行,在一定范围内,NaOH和Na2CO3浓度增加,放氢速率增加.研究还发现,担载贵金属Pt或Ru对反应速率没有显著影响.本文还采...     

光系统II杂化Z型水分解体系中产氢助催化剂上逆反应的抑制

光催化Z型水分解反应有望发展成为一种生产太阳氢能的有效方法.将具有优异水氧化性能的自然光系统Ⅱ与人工半导体产氢材料进行耦合,以构建生物-人工杂化光催化Z型水分解反应体系,对于深入理解自然光合作用原理和促进人工太阳能转化具有重要意义.由于Fe(CN)_6~(3-)可从光系统Ⅱ接受电子,因此氧化还原电对Fe(CN)_6~(3-/4-)成为研究光系统Ⅱ基杂化Z型水分解体系时常用的电子体递.然而,在该Z型水分解反应中,正向的产氢反应经常受到由Fe(CN)_6~(3-)引起的逆反应的阻碍,致使水分解过程中产氢产氧失衡,不能实现有效的全分解水反应.本文通过在光系统Ⅱ杂化Z型水分解体系中的人工光催化剂ZrO_2/TaON上沉积产氢助催化剂PtCrOx,有效抑制了逆反应的发生,从而使体系实现了全分解水反应.实验发现,在光催化剂ZrO_2/TaON上沉积金属Pt作为产氢助催化剂时,以Fe(CN)_6~(4-)为电子供体的光催化产氢半反应基本没有产氢活性,而当沉积氧化物PtCrO_x作为产氢助催化剂时,产氢半反应活性可提高至～35μmolh–1.进一步研究发现,这种产氢活性的差异主要是由于两种不同助催化剂对于Fe(CN)_6~(3-)引起的氢气氧化逆反应的催化行为不同.金属Pt表面对于氢气具有吸附和活化作用,光催化反应中产生的氢气和Fe(CN)_6~(3-)在Pt-ZrO_2/TaON催化作用下发生快速的氧化还原逆反应;而由于PtCrO_x表面对氢气的吸附和活化作用较弱,上述氢气氧化的逆反应在PtCrO_x-ZrO_2/TaON存在时不发生.此外,在产氢过程中,光生电子虽然迁移到助催化剂PtCrO_x上,但PtCrO_x中高氧化态的Pt~Ⅱ和Pt~Ⅳ并未被还原,因此使PtCrO_x-ZrO_2/TaON具有稳定的光催化产氢反应活性.基于PtCrO_x-ZrO_2/TaON在Fe(CN)_6~(4-)作为电子供体时有效的产氢半反应,我们以Fe(CN)_6~(3-/4–)作为电子递体,将光系统Ⅱ与PtCrOx-ZrO_2/TaON耦合构建了生物-人工杂化Z型全分解水体系,通过调节Fe(CN)_6~(3-)/4–的初始浓度,最终实现了杂化体系的全分解水反应,产氢和产氧活性分别为～20μmol H_2 h~(–1)和～10μmol O_2 h~(–1).这为理解和抑制以Fe(CN)_6~(3-)/4–作为电子递体的光系统Ⅱ-人工杂化Z型水分解体系中的逆反应提供了新的思路.     

Ru3(CO)9(TPPTS)3催化的水/有机两相芳香硝基化合物CO选择性还原的研究

将水溶性膦/钌配合物Ru₃(CO)₉(TPPTS)₃(TPPTS:三苯基膦三-间磺酸钠)用于以CO为还原剂的水/有机两相芳香硝基化合物选择还原为芳胺的反应,发现相转移催化剂对反应有明显的促进作用,其中以添加十六烷基三甲基溴化铵(CTAB)的效果最好.以邻氯硝基苯为底物考察了相转移催化剂浓度、NaOH浓度、反应温度、压力等对反应转化率和选择性的影响.当反应条件为120℃,4MPa,3mol/LNaOH时,反应8h,邻氯硝基苯的转化率和邻氯苯胺的选择性均可达到99.9%.而且对含有羰基、氰基的芳香硝基化合物也有很高的活性和选择性.催化剂循环3次后,邻氯硝基苯的转化率和邻氯苯胺的收率仍可达到92%.     

水热合成Co_3O_4的制备参数调变及其催化分解N_2O性能（英文）

以十六烷基三甲基溴化胺(CTAB)为模板剂,通过调变CTAB浓度水热合成了氧化钴前驱体,焙烧制得棒状形貌的Co_3O_4,在其表面浸渍K_2CO_3溶液制得K改性的Co_3O_4催化剂,用于N_2O分解。用X射线衍射(XRD)、N_2物理吸附(BET)、扫描电镜(SEM)、X射线光电子能谱(XPS)、H_2程序升温还原(H_2-TPR)和O_2程序升温脱附(O_2-TPD)等技术对催化剂进行了表征,考察了CTAB/钴及尿素/钴物质的量比等制备参数对Co_3O_4催化分解N_2O活性的影响。结果表明,CTAB浓度为0.05 mol/L、CTAB/钴离子物质的量比为1、尿素/钴离子物质的量比为4时,所制备的Co_3O_4催化剂具有较高的N_2O分解活性,而K改性可以进一步提升其催化性能。K改性的Co_3O_4在有氧有水气氛中400℃下进行N_2O分解反应,50 h后N_2O转化率仍保持在91%以上。     

刊首语

采用FT-IR、 NH_3-TPD和~(27)Al MAS NMR等催化剂表征手段和间歇反应方法,系统研究了NaOH溶液(0.2～0.4mol/L)的碱改性和NaOH溶液与硝酸溶液(0.2 mol/L)的碱-酸组合改性对一种氢型Y沸石(Si/Al=7.5)的物化性质和环己酮肟液相贝克曼重排反应性能的影响.结果表明,碱改性具有脱硅作用,可使Y沸石的表面Bro¨nsted酸中心和Lewis酸中心数量显著增加.酸处理具有脱铝作用,可以选择性地脱除Y沸石中的一部分非骨架铝,从而降低碱改性催化剂的Lewis酸性.用0.2 mol/L NaOH溶液和0.2 mol/L硝酸溶液通过碱-酸组合改性得到的催化剂DeSiAl-Y-0.2在环己酮肟液相重排反应中表现出较好性能.在以苯甲腈为溶剂、反应温度和时间分别为130℃和3 h的条件下,其环己酮肟转化率和己内酰胺选择性都达到了82.9%,分别比Y沸石母体提高了18%和1.5%.在DeSiAl-Y-0.2催化剂上初步开展了反应条件和溶剂效应的研究工作,从中可以看出研制用于环己酮肟液相重排反应的Y型沸石催化剂的关键在于提高其己内酰胺选择性.     

琥珀酸酐均相催化加氢生成γ-丁内酯的反应动力学研究

以RuCl3 /PPh3 为催化剂体系研究了琥珀酸酐均相催化加氢反应动力学 .结果表明当催化剂浓度小于1.0× 10 -2 mol /L ,n(PPh3 ) /n(Ru) =7,SA浓度小于 2 .2 5mol /L和反应氢压PH2 小于 2 .2 5MPa时 ,反应速率方程为R =k1[Ru][SA]PH2 ;当反应氢压PH2 大于 2 .77MPa时 ,反应速率方程为R =k2 [Ru][SA].琥珀酸酐加氢生成γ -丁内酯的活化能Ea为 85 .2kJ/mol,活化焓△H≠ 为 81.8kJ /mol     

碱性溶液中空气电极催化剂Co-N/C的研究

采用简单热处理方式制备了空气电极用氧还原电催化剂Co-N/C(800),利用线性电位扫描、控电流极化曲线及单电池测试等方法评价Co-N/C(800)的氧还原反应(ORR)催化活性。结果表明:该催化剂在碱性溶液中(1 mol/LNaOH)对ORR有很好的催化活性,起始氧还原电位约为0.04 V(vs.Hg/HgO);在室温及空气气氛条件下,以Co-N/C(800)制备的空气电极在7 mol/L NaOH溶液中时性能最佳,在电极电位为-0.6 V(vs.Hg/HgO)时电流密度达100 mA/cm2;自制的空气电极与纯锌片所组装的锌-空气电池,以7 mol/L NaOH为电解液,在电池过电位为0.8 V时,电流密度超过了100 mA/cm2,催化性能优于常规MnO2催化剂;同时进行了单电池放电测试,放电平台保持在1.25～1.30 V且性能稳定。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.