Single crystal growth of La2(SO4)3 · 9 D2O

Single crystals of La₂(SO₄)₃ · 9 D₂O were grown from saturated D₂O solutions. According to X-ray diffraction measurements, the crystals have a hexagonal structure with unit cell parameters a = 10.996 Å and c = 8.077 Å (space group C–P6₃/m). Several physical properties were also determined (density, refractive indices, dielectric constants, specific heat, coefficient of linear expansion, microhardness).     

Stability Determinant of Anisotropic Phases

The thermodynamic stability of crystal determinant D) and nonstability D_{n st}⁽¹⁴) of the fourteenth order, their adiabatic and corresponding isodynamical coefficients are discussed.     

Density and mobility of anti-frenkel defects in SrF2 crystals

By fitting the theoretically calculated temperature-dependent conductivity σ to the measured dependencies log σT ÷ 1/T the following parameters have been determined: free formation enthalpy of anti-Frenkel defects g_AF = 2.05 eV – 6.35 kT; mobilities of F⁻ion vacancies F and interstitials F: v_νT = 600 exp (-0.70 eV/kT) cm² K/Vs, v_iT = 1.1 · 10⁴ exp (-0.93 eV/kT) cm² K/Vs. — The free association enthalpies of complexes consisting of single foreign ions (Sc³⁺, Y³⁺, La³⁺, Sm³⁺, Li⁺, K⁺, Na⁺, O⁻) and the charge-compensating defect were obtained. The vibration frequency of F⁻ ions in the neighbourhood of F and F is changed by a factor of 2.6 and 0.6, respectively.     

Absorption and ionic conductivity of oxygen-containing SrF2 crystals

An absorption band at 3644 cm⁻¹ is caused by isolated OH⁻ ions. O⁻ ions cause an absorption band at 213 nm the oscillator strength of which is 0.020. Charge-compensation of O⁻ ions is effected by F⁻ ion vacancies (F). As for CaF₂ crystals there occur monomers and dimers of [O⁻ – F] complexes. The mass action constants of association of F with oxygen centres are K_AD = ⅓ exp (4.28 – 0.82 eV/kT) for [O⁻ – F], K_AT = 4 exp (17.4 – 1.25 eV/kT) for [2 O⁻ – F] and K_AQ = exp (4.2 – 0.89 eV/kT) for [2 O⁻ – 2 F].     

Electromigration of 113Sn in Cu

Electromigration of ¹¹³Sn in Cu was investigated by the isothermal method in the temperature range from 918 to 1042 °C using the thin layer boundary condition. Following Gilder and Lazarus the welding interface was marked by help of a ¹⁸¹Hf-layer. The pseudo activation energy, which is (1.87 ± 0.29) eV, agrees within the experimental errors with the activation energy of impurity diffusion. Because of the fluctuation of the individual values a significant temperature dependence of the apparent effective charge could not been observed. The average value of the apparent effective charge z = −33 ± 2. The residual resistance due to electron scattering at the jumping atoms yields for the models of Fiks, Huntington, Bosvieux and Friedel (3.4 ± 0.3)μ Ω cm/at%, (6.8 ± 0.6) μΩ/at% and (5.7 ± 0.6) μΩ cm/at%, respectively.     

Thermoelectric properties of indium sesquiselenide single crystals

Single crystals of δ-In₂Se₃ were prepared in the solid state laboratory at Qena-Egypt, by means of Bridgman technique. The temperature dependence of the thermal e.m.f. α in the temperature range from 205 K up to 360 K of In₂Se₃ was studied. The δ-phase In₂Se₃ sample appeared to be n-type. The ratio of the electron and hole mobilities are found to be μ_n/μ_p = 1.378. The effective masses of charge carriers are m = 1.3 × 10⁻³⁰, m = 8.27 × 10⁻³¹ kg for holes and electrons, respectively. The diffusion coefficient was estimated to be D_n = 3.37 cm²/s and D_p = 2.45 cm²/s for both electrons and holes, respectively. The mean free time between collision can be deduced to be τ_n = 70 × 10⁻¹⁶ s and τ_p = 8 × 10⁻¹⁴ s for both electrons and holes. The diffusion length of the electrons and holes are found to be L_n = 1.5 × 10⁻⁷ cm and L_p = 4.4 × 10⁻⁷ cm.     

The influence of the direct quench and indirect quench to Ta > Th on the decomposition behaviour of an Al-2 at.% Zn-1 at.% Mg alloy

The decomposition behaviour of an Al-2.0 at.% Zn-1.0 at.% Mg alloy after direct quench (DQ) and indirect quench (IQ:T = 23 °C, t) to the ageing temperature T = 160 °C (above the temperature of the rapid homogeneous nucleation, T_h) was investigated by means of TEM and isothermal resistivity measurements. The precipitation density of the η-particles yields a maximum value at pre-ageing times about 10 min at T = 23 °C. To clear up the reason for that phenomenon a loop-formation and clustering model was introduced.     

Thermoelectric power of indium sesquisulphide single crystals

The investigation covers a temperature range from 200 to 450 K. Thermoelectric power measurements of In₂S₃ crystals showed that all samples under investigation have a positive TEP in all temperature ranges, indicating n-type conductivity for In₂S₃ crystals. The ratio of the electron and hole mobilities is μ_n/μ_p = 4.71. The effective mass of electrons m is found to be 0.00008 × 10⁻³¹ kg. The obtained effective masses of holes m = 1.893 × 10⁻³¹ kg. The diffusion coefficient for both carriers (electrons and holes) is evaluated to be 84.71 cm²/s and 17.985 cm²/s respectively. The mean free time between collision is estimated to be τ_n = 1.7 × 10⁻²⁰s, and τ_p = 8.5 × 10⁻¹⁷s. The estimated diffusion length for electrons is found to be L_n = 1.2 × 10⁻⁹ cm and L_p = 3.9 × 10⁻⁸ cm.     

Strukturelle Umklapp-Vorgänge in metastabilen β1-Kupfer-Zink-Mischkristallen bei tiefen und höheren Temperaturen (I). Gitterdynamische Skizze1)

The quantity of the shear-modulus G′ = (c₁₁ – c₁₂)/2 is a measure for the probability of structural Umklapp-processes to occur in metastable β₁-Cu-Zn-solid solutions. Such processes take place, if G′ = G′(T, x) would fall below a critical limit, G′_crit, e.g. by lowering of temperature T or/and Zn-concentration x, because the Fermi-contribution to G′will sink in the 1^st and with him additional the Coulomb-contribution in te 2^nd case. Both ones are the authoritative stabilizing factors for β₁ and therefore specific fo its lattice-dynamical behaviour, especially in the longwavy range of thermoacoustic lattice-vibrations, by which the cooperative Umklapp-motion will escape. Umklapping can also be initiated by favourably oriented dislocations, is G′ would approach to G′_crit in their neighbourhood: G′_critG′(xM8), with xM8  Umklapp-concentration. This is possible by variation of x during isothermal reactions, in the course of whicht he β₁-matrix will heterogenize itself into Zn-poorer and -richer districts β and β (pre-diffusion by means of quenchy vacancies). Both kinds of districts, among which the latter ones will enhance their degree of stability, are joint together coherently. They build up a so called β /β -parquet. The parquet-bricks can reach a critical size, which is necessary that sufficient large atom-collectives can simultaneously be caused to an Umklapp-motion and to occupate new equilibrium positions by thermo-acoustic shear-waves (comparison with a sin-wave beeing changed to a zigzag-line). Only at higher temperatures the bricks come up to the critical size. Umklapping comes about only in the β -bricks, which turn by it to a transition lattice (β₂) with a structure similary to that of the lowtemperature-martensite β′′. After that β₂ changes to α-phase. The way β ⇒ α is marked by the following steps: prediffusion, Umklapping + dislocation, leading to β₂, and a further dislocation dissoziation, leading the atoms to the equilibrium positions in the α-lattice. The so stepped mechanism acts an nucleationmechanism of the α-phase. After the nucleation the α-nuclei grow at the cost of too much formed β (postdiffusion). By isothermal reactions at too low temperatures a mini-herterogenized state of the β₁-matrix will be caused comparable with coldhardening states of other alloys (Guinier-Preston-zones). A β₁-matrix in such a state is unable to isothermal Umklapping, so that α-crystals can be formed – provided that the mini-heterogenities are resolved by increasing of the reaction temperature.     

Crystallization and Thermoelectric Power of Tl2Te3 Single Crystals

Thermoelectric power (TEP) of Tl₂Te₃ was measured in the temperature range from 150 to 480 K. The crystal was found to have a p-type conductivity throughout the whole range of temperature. The effective masses of holes and electrons were determined at room temperature and found to be m = 1.1 × 10⁻³⁴ kg and m = 1.72 × 10⁻³⁵ kg, respectively. Also at the same temperature the mobility μ_p was found to be 1737.8 cm²/V.s and μ_n was 3962.2 cm²/V.s. The hole and electron diffusion coefficients were obtained as 44.84 cm²/s, and 102.23 cm²/s. The relaxation times for holes and electrons were calculated and yielded the values τ_p = 1.19 × 10¹² s and τ_n = 4.25 × 10¹³ s, respectively.     

Hyperfine structure of Cr5+ EPR spectra in X-irradiated potassium halide crystals doped with CrO and Ca2+

The hyperfine structure has been investigated in the EPR spectra of X-irradiated KCl: CrO, Ca²⁺ and KBr: CrO, Ca²⁺ crystals. Preliminarily spectra were simplified by means of heating the crystals up to 400 K for KCl and 440 K for KBr, that destroys the less stable CrO · V centers. It is ascertained, that principal directions of g- and A-tensors do not coincide, and principal A-values are determined. Calculations, making use of the experimental meanings of g- and A-tensor components, showed, that the degree of distortion of oxygen tetrahedra in CrO · Ca²⁺ · V centers is almost the same in both KCl and KBr crystals; besides, these calculations suggest the existence of a strong covalent bonding between the central Cr⁵⁺ ion and four oxygen ligands in CrO ions.     

Impurity band conduction effects in liquid phase epitaxial Te-doped GaP grown from tin solution

GaP layers were grown by liquid phase epitaxy from tin solution on semi-insulating GaAs substrates with various amounts of Te added to the melt (x_Te = 10⁻⁴ …︁ 3 · 10⁻²). The Sn and Te concentrations in the layers were determined by chemical analysis as function of x. An analysis of the electrical measurements shows that the carrier transport in the layers is essentially determined by impurity band conduction effects.     

Equilibrium dopant incorporation in CVD silicon epitaxy

In-situ doping of epitaxial silicon layer with arsenic is controlled either by means of a mixed equilibrium – kinetical mechanism characterised by the influence of layer growth rate, or by means of a pure equilibrium-related mechanism showing no layer growth rate effect. Layer growth rate can be selected to mark the transition from one mode to the other by introducing a characteristic rate v. Equilibrium controls dopant incorporation when v_epi 〈 v 〉 0 is ture. That critical rate depends on temperatur as well as on input partial pressure of arsine and can be expressed by the three different empirical quantities A, B, and E. The former two of them are defined by conventional dopant incorporation theory. The additional quantity E is a function of arsine input pressure. That function not only defines an upper limit E= E_∞ but also a lower limit E= 0 at which v= 0 is valid.     

Dependence of the Electric Properties and the Positron Lifetimes on the Dopant Content in La-doped SrTiO3

The resistivity, the dielectric constant, and the positron lifetimes in La-doped SrTiO₃ have been measured for La content x of 0—10 at.%. It was found that with increasing x, the variations of the resistivity and the dielectric constant and the positron lifetime parameters are nonmonotonic. The positron experiments have shown that the La-doping induces mainly formation of Sr vacancies and variation of Sr vacancy configuration; the most probable configuration is the isolated Sr vacancies (V) as x < 0.5 at.%, the associated defects (La V) for 0.5 < x < 1 at.%, and the associated defects (2 La V) above x = 1 at.%. The results suggest that the variation of the resistivity can be regarded as variation of electron density, and the variation of the dielectric constant results mainly from variations of the space-charge polarizaion and Sr-vacancy concentration and configuration.     

On the mechanism of chemical polishing of GaAs crystals

In order to establish reproducible conditions for chemical lap polishing of GaAs with NaOCl solutions, containing also OH⁻- and CO -ions, the mechanism of dissolution was investigated using the rotating disk arrangement. In solutions with excess OCl⁻ concentrations likewise diffusion and a reaction of the first order with respect to OH⁻ and CO, complexing agents for Ga-ions, control the dissolution rate, and the surfaces of the wafers are polished. OH⁻ and CO₃^2– concentrations in excess with respect to OCl⁻ lead to rate determining OCl⁻ diffusion and to irregularly polished or film covered surfaces. Diffusion constants for OH⁻, CO and OCl⁻ are given.     

Thermal expansion anisotropy and individual bond expansion coefficients in ternary chalcopyrite compounds

The individual bond expansion coefficients of the A^IIB^IVC and A^IB^IIIC₂^VI chalcopyrite compounds are calculated from the principal linear thermal expansion coefficients of the lattice parameters using the regular B C tetrahedron model and a model with a temperature independent free parameter of the lattice. It is shown that the bond expansion coefficients derived from the latter model are in better agreement with the trends found for the interatomic forces in the chalcopyrite compounds and observed for the thermal expansion coefficients in the binary AC, A^IIC and BC compounds.     

Interface Kinetical Limitations in Closed-Tube Chemical Vapour Transport (I)

A semiempirical method is proposed, by which the role of kinetical constraints to the growth in closed tube chemical vapour transport can be evidenced. The method is based on the evaluation of the ratio (Φ) between the quantity D which is related to the semiempirically-determined average diffusivity of the gaseous species during the growth process, and the quantity D, which is related to the maximum average diffusivity of the gaseous species as is predicted, through the choice of a suitable diffusional model, by the equilibrium thermodynamics and diffusion properties of the vapour phase.     

Some correlations in liquid phase growth (I)

In this work we consider some circumstances of the growth process of an n-component solid phase from an n-component liquid phase and provide some general relationships, which must be observed in this growth process. In more detail we treat the two extreme cases: growth when (∂C/∂t = 0) — the stationary case; growth when (∂C/∂x = 0) — no concentration gradients in the liquid phase. In our opinion these theoretical considerations will simplify the investigations of multicomponent systems.     

Calculation of the Fourier Coefficients of the Generalized Spherical Functions

Generalized spherical functions which are used in texture analysis may be developed into Fourier series. The coefficients a of this series may be expressed as a simple product of much smaller a number of other coefficients Q. This may greatly simplify the numerical calculation of these functions and hence also of the texture function itself.     

Paramagnetic centres in X-irradiated LiNaSO4 single crystals

The EPR and optical absorption spectra of paramagnetic centers produced by X-irradiation in LiNaSO₄ single crystals were investigated. 7 EPR lines are observed at room temperature and 6 more lines – at LNT. The angular dependences of line positions at LNT are studied and the principal g-factor values are defined. The comparison with published data permitted to assign six the most anisotropic lines to ion-radical SO with different orientations in the lattice; two lines to ion-radical SO; slightly anisotropic doublet line – to O ozonide ion; isotropic line with g = 2. 0045 – to ion radical SO.