Quaternary liquid—liquid equilibrium. Cyclohexane—ethanol—benzene—acetonitrile

Nagata, I., 1986. Quaternary liquid—liquid equilibrium. Cyclohexane—ethanol—benzene—acetonitrile. Fluid Phase Equilibria, 26: 59–68.Experimental liquid—liquid equilibrium results are presented for the ternary acetonitrile—ethanol—cyclohexane and the quaternary cyclohexane—ethanol—benzene—acetonitrile systems at 25°C. The results agree well with the calculated values derived from the extended UNIQUAC equation (Nagata) with parameters from phase equilibrium data for the constituent binary mixtures or ternary tie-line data sets.     

Molecular dynamics and the structure of macrocycles —Solvent acetonitrile interactions

Microwave complex permittivities,* = -J, are reported in the 1–90 GHz frequency range for the macrocycles 18-crown-6 (18C6) and 15C5 added to acetonitrile in stoichiometric proportions, in the solvent CCl₄ at 25°C. Digitized infrared spectra of the CN stretch ₂ vibration of acetonitrile for the same systems are reported in the 2300–2200 cm^–1 spectral region. The macrocycle 12C4 added to CH₃CN has also been investigated in the infrared. Both the dielectric relaxation and infrared results are interpreted in terms of macrocycle-acetonitrile interactions, probably involving a methyl-hydrogen to ethereal-oxygen interaction. These interactions with CH₃CN diminish in strength according to the sequence: 18C6 > 15C5 > 12C4.This paper is dedicated to the memory of the late Dr C. J. Pedersen.     

What ion is generated when ionizing acetonitrile?

It has long been assumed that ionizing neutral acetonitrile produces ions with the same atomic connectivity, CH(3)CN(+*). Recent calculations on the C(2)H(3)N(+*) potential energy surface have suggested that it may be difficult to generate pure CH(3)CN(+*) when ionizing acetonitrile. We have probed the interconversion of CH(3)CN(+*) and its lower energy isomer CH(2)CNH(+*) by calculation, collision-induced dissociation mass spectrometry and ion-molecule reaction. The latter ion, ionized ketenimine, is co-generated upon electron or chemical ionization of neutral acetonitrile in the ion source of a mass spectrometer. An estimate of the ratio of the two isomers can be obtained from their respective ion-molecule reactions with CO(2) or COS. CH(3)CN(+*) reacts by proton-transfer with CO(2) and charge transfer with COS, whereas CH(2)CNH(+*) is unreactive.     

One—Pot Reaction of Aldehydes,α—Haloketones and （Phenylsulfonyl） acetonitrile Promoted by SmI3

One-pot reaction of aldehydes,α-haloketones and (phenylsulfonyl) acetonitrible promotes by SmI3 proceeded smoothyl to give 1-cyano-1-phenylsulfonyl-2-aryl-3-aroyl-propane derivatives in moderate good yields.     

Rayleigh and Raman light scattering in hydrogen-bonded acetonitrile–water

The structure, vibrational frequencies, light scattering activities and binding energies of CH₃CNH₂O are obtained from ab initio methods. The hydrogen NH bond distance is calculated as 2.06 Å, the dipole moment as 5.77 D and our best estimate for the binding energy is 3.5 kcal mol^–1 (14.7 kJ mol^–1), after correcting for zero-point vibrations. The calculated average dipole polarizability is 39.67 au and the anisotropy is fairly large, corresponding to 21.78 au. The changes in intramolecular vibrational frequencies are analyzed. The scattering activities and depolarization of the Rayleigh and Raman light scattered are calculated. In the Raman case the depolarization due to the intense NC stretching vibration is increased by 20% after the hydrogen bond. For the OH symmetric stretch of water there is a large redshift of 75 cm^–1 and a great intensification of the Raman scattering activity by a factor of 2 and a considerable increase of the depolarization by a factor of nearly 4.From the Proceedings of the 28th Congreso de Químicos Teóricos de Expresión Latina (QUITEL 2002)     

Raman study of molecular dynamics of inorganic fluoroxidizers in nonaqueous solutions—Part 1. Xenon difluoride in acetonitrile

The Raman spectra of the totally symmetric ν₁(Σ_g⁺) mode of XeF₂ molecules have been measured in CH₃CN solutions at various temperatures and concentrations. The vibrational and rotational correlation functions as well as the characteristics times have been calculated. It was concluded that the vibrational band width in these solutions is to be attributed to the vibrational dephasing, whereas the contribution from the rotational relaxation has been found to be of less importance.     

Study of Belousov—Zhabotinsky oscillators in water—acetonitrile medium employing EMF and EPR techniques with o-vanillin,p-vanillin and adrenaline as substrates

The oscillatory behaviour of three substrates, ortho-vanillin, para-vanillin and adrenaline, in mixed media (water plus 20% acetonitrile) has been investigated using EPR and EMF techniques. All these substrates exhibit two types of oscillation involving Br₂/Br⁻ and Mn(III)/Mn(II) redox couples. From the oscillatory characteristics (total time, number of oscillations and time per oscillation) obtained by employing these techniques, the reactivities of the vanillins have been correlated. The Field—Koros—Noyes mechanism, suggested for catalysed systems in pure aqueous medium, is established to be applicable even in mixed media.     

Volumetric properties of H2O, D2O, and methanol in acetonitrile at 278.15—318.15 K

The densities of H₂O, D₂O, and MeOH solutions in acetonitrile with the solute concentrations up to 0.07 molar fractions at 278.15, 288.15, 298.15, 308.15, and 318.15 K were measured using vibrating-tube densimetry with an error 8·10^–6 g cm^–3. The limiting partial molar volumes for the H/D isotopomers of water and IaII in acetonitrile (V^– ₂ ) and the isotope effects in V^– ₂ and in excess molar volumes of acetonitrile—water mixtures were calculated. Molecules of H₂O, D₂O, and IaII form associates with acetonitrile molecules via hydrogen bonds. The associates have the packing volumes close to those in the individual solute. The water and methanol molecules were assumed to be incorporated into the acetonitrile structure without substantial changes in the latter. However, this process results in some compression of the system with a simultaneous increase in its expansibility.     

Sorption of adamantane phenylamide derivatives on hyper-cross-linked polystyrene from water–acetonitrile eluents

Study of the main physicochemical features of the sorption of phenylamide adamantane derivatives on hyper-cross-linked polystyrene from water–acetonitrile solutions shows that both hydrophobic and electronic interactions make a large contribution to retention, especially for a chlorine-containing derivative in which there are π–p and π–d interactions between the outer-shell electrons of the chlorine atom in addition to π–π interactions between aromatic fragments of the sorbate and sorbent.     

Preparation and properties of derivatives of dithiolylidene-(4′-phenyldiazonium)acetonitrile

Thefluoroborates of (4,5-dimethyl-1,3-dithiolylidene)-(4-phenyldiazonium)acetonitrile and (4,5-ethylenedithio-1,3-dithiolylidene)-(4-phenyldiazonium)acetonitrile have been prepared; these compounds are photosensitive in the visible region of the spectrum. The quantum yield in the photolysis of the fluoroborates in acetonitrile solution amounts to 0.1 moteleinstein.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 2, p. 179–181, February, 1994. Original article submitted November 29, 1993.     

Solvation thermodynamics of benzene,nitrobenzene, and aniline in water–acetonitrile mixtures

The enthalpies of dissolution of benzene, nitrobenzene, and aniline in water–acetonitrile mixtures are determined via calorimetry. The concentration dependences of the standard enthalpies of solvation of solutes are calculated. It is found that the concentration dependences of the standard enthalpies of solvation pass through maxima. The height of the observed maxima is shown to depend largely on the nature of the substituent. In the presence of a hydrophilic amino group capable of forming strong hydrogen bonds with water molecules, the value of a maximum falls; in the presence of a nitro group, it rises. The enthalpy parameters of pair interaction between molecules of water and benzene and its derivatives are calculated.     

A comprehensive self-consistent spectrophotometric acidity scale of neutral Brønsted acids in acetonitrile

For the first time, the self-consistent spectrophotometric acidity scale of neutral Br?nsted acids in acetonitrile (AN) spanning 24 orders of magnitude of acidities is reported. The scale ranges from pK(a) 3.7 to 28.1 in AN. The scale includes 93 acids that are interconnected by 203 relative acidity measurements (DeltapK(a) measurements) and contains compounds with gradually changing acidities, including representatives from all of the conventional families of OH (alcohols, phenols, carboxylic acids, sulfonic acids), NH (anilines, diphenylamines, disulfonimides), and CH acids (fluorenes, diphenylacetonitriles, phenylmalononitriles). The CH acids were particularly useful in constructing the scale because they do not undergo homo- or heteroconjugation processes and their acidities are rather insensitive to traces of water in the medium. The scale has been fully cross-validated: the relative acidity of any two acids on the scale can be found by combining at least two independent sets of DeltapK(a) measurements. The consistency standard deviation of the scale is 0.03 pK(a) units. Comparison of acidities in many different media has been carried out, and the structure-acidity relations are discussed. The large variety of the acids on the scale, its wide span, and the quality of the data make the scale a useful tool for further acidity studies in acetonitrile.     

Silver electrodeposition from water–acetonitrile mixed solvents in the presence of tetrabutylammonium perchlorate

In this paper, surface-enhanced Raman spectroscopy has been used to investigate the electrode/electrolyte interface during Ag electrodeposition from water–acetonitrile mixed solvents. The reactivity of acetonitrile during Ag electrodeposition has been monitored, promoted by the electrocatalytic activity of silver clusters electrodeposited onto the electrode surface. The effect of the addition of tetrabutylammonium cations to the mixed solvents has been investigated and its adsorption and tilting on the silver surface has been followed as a function of the cathodic overpotential.     

Catalytic oxidation of cyclohexene to cyclohexanone by a triple system in acidic aqueous acetonitrile medium

The catalytic oxidation of cyclohexene to cyclohexanone using Pd(OAc)2/HQ/FePc was investigated in an acidic aqueous solution of acetonitrile. The role of each component of this system in the oxidation of cyclohexene was explored by means of UV-VIS, IR, XPS spectroscopy and cyclic voltammetry, respectively. Based on the experimental results, the mechanism of the oxidation of cyelohexene catalyzed by Pd(OAc)2/HQ/FePc was elucidated.     

Heat capacities and volumes of methanol+acetonitrile mixtures at 5 and 25°C

Densities and heat capacities of methanol + acetonitrile mixtures were determined over the whole composition range at 5 and 25°C. Apparent and partial molar volumes and heat capacities for both components of the mixture were calculated from these data. These functions for acetonitrile run monotonously over the whole composition range of the mixture at both temperatures, while those for methanol exhibit extrema (volumes-minimum and heat capacities-maximum) at high acetonitrile content. The reasons of the observed behavior of the system are discussed.     

Brønsted basicities of diamines in the gas phase, acetonitrile, and tetrahydrofuran

A comprehensive basicity study of alpha,omega-alkanediamines and related bases has been carried out. Basicities in acetonitrile (AN, pK(a) values), tetrahydrofuran (THF, pK(alpha) values), and gas phase (GP, GB values), were measured for 16, 14, and 9 diamine bases and for several related monoamines. In addition the gas-phase basicities and equilibrium geometries were computed for 19 diamino bases and several related monoamines at the DFT B3LYP 6-311+G** level. The effects of the different factors (intrinsic basicity of the amino groups, formation of intramolecular hydrogen bonds, and molecular strain) determining the diamine basicities were estimated by using the method of isodesmic reactions. The results are discussed in terms of molecular structure and solvation effects. The GP basicity is determined by the molecular size and polarizability, the extent of alkylation, and the energy effect of intramolecular hydrogen bond formation in the protonated base. The basicity trends in the solvents differ very much from those in GP: 1) The solvents severely compress the basicity range of the bases studied (3.5 times for the 1,3-propanediamine family in AN, and 7 times in THF), and 2) while stepwise alkylation of the basicity center leads to a steady basicity increase in the gas phase, the picture is complex in the solvents. Significant differences are also evident between THF and AN. The high hydrogen bond acceptor strength of THF leads to this solvent favoring the bases with "naked" protonation centers. In particular, the basicity order of N-methylated 1,3-propanediamines is practically inverse to that in the gas phase. The picture in AN is intermediate between that of GP and THF.     

Complexation of metal ions with double-armed diazadithia lariat ether carrying anthracene moieties in acetonitrile–dioxane

A new 14-membered crown ether with nitrogen–sulfur donor atom carrying two anthryl groups was designed and synthesized by the reaction of the corresponding macrocyclic compound and 9-(chloromethyl) anthracene. The influence of metal cations such as Al³⁺, Zn²⁺, Fe²⁺, Fe³⁺, Co²⁺, Ni²⁺, Mn²⁺, Cu²⁺, Cd²⁺, Hg²⁺ and Pb²⁺ on the spectroscopic properties of the ligand was investigated in acetonitrile–dioxane solution (1/1) by means of absorption and emission spectrometry. The results of spectrophotometric titration experiments disclosed the complexation stoichiometry and complex stability constant of the novel ligand with Fe²⁺, Fe³⁺, Al³⁺, Cd²⁺, Cu²⁺, Zn²⁺, Pb²⁺ and Hg²⁺ cations. Absorption spectra show isobestic points in the spectrophotometric titration of these cations. The presence of excess of Al³⁺, Zn²⁺, Fe²⁺, Fe³⁺, Co²⁺, Ni²⁺, Mn²⁺, Cu²⁺, Cd²⁺, Hg²⁺ and Pb²⁺ cations caused an enhancement of anthryl fluorescence. Especially, the enhancement in case of the interaction of Hg²⁺ and Al³⁺ cations with the ligand was pronounced.     

Performance of short-chain alcohols versus acetonitrile in the surfactant-mediated reversed-phase liquid chromatographic separation of β-blockers

Organic solvents are traditionally added to micellar mobile phases to achieve adequate retention times and peak profiles, in a chromatographic mode which has been called micellar liquid chromatography (MLC). The organic solvent content is limited to preserve the formation of micelles. However, at increasing organic solvent contents, the transition to a situation where micelles do not exist is gradual. Also, there is no reason to neglect the potentiality of mobile phases containing only surfactant monomers instead of micelles (high submicellar chromatography, HSC). This is demonstrated here for the analysis of β-blockers. The performance of four organic solvents (methanol, ethanol, 1-propanol, and acetonitrile) was compared in mobile phases containing the anionic surfactant sodium dodecyl sulphate in the MLC and HSC modes. The association of the organic solvent molecules with micelles gives rise to a significant loss in the elution strength of the organic solvent; whereas upon disruption of micelles, it tends to that observed in the hydro-organic mode. The elution behaviour of the β-blockers was modelled to predict the retention times. This allowed the detailed exploration of the selectivity and resolution of the chromatographic systems in relatively wide ranges of concentration of surfactant and organic solvent. The best performance in terms of resolution and analysis time was achieved using HSC with acetonitrile, being able to base-line resolve a mixture of eight β-blockers. Ethanol also provided a good separation performance, significantly improved with respect to methanol and 1-propanol. In contrast, the hydro-organic mode using acetonitrile or any of the short-chain alcohols could not succeed with the separation of the β-blockers, owing to the poorer selectivity and wider peaks.     

Silver electrodeposition from water–acetonitrile mixed solvents and mixed electrolytes in the presence of tetrabutylammonium perchlorate. Part I—electrochemical nucleation on glassy carbon electrode

Nucleation and growth of silver, electrodeposited from water–acetonitrile (CH₃CN from 0 to 100% by volume) mixed solvents on glassy carbon electrodes, was studied by means of double-sweep voltammetry, current–time transients (CTT) and scanning electron microscopy (SEM). The effects of the addition of the specifically interacting tetrabuthylammonium cation were also investigated. From voltammetries, the formal potential, the nucleation potential and the cathodic current efficiency have been evaluated as a function of the mixed solvent composition. The key role on nucleation kinetics of transferring Ag⁺ from the bulk phase to the CH₃CN-enriched electrode/solution interphase has been highlighted. CTT transients were described by a model combining instantaneous and progressive nucleation mechanisms. SEM images highlighted the effects of the presence of the organic solvent, which yields to a more regular growth, and of the quaternary ammonium salt, which exhibits grain-refining properties.     

The photogalvanic effect of Fe(II)-β-diketonate/thionine systems in aqueous acetonitrile

Summary The photogalvanic effect of ferrousbis-(acetylacetonate) (Fe(II)(acac)₂) and ferrousbis-(trifluoroacetylacetonate) (Fe(II)(tfac)₂) complexes in aqueous acetonitrile thionine dye solutions has been studied in a photogalvanic cell of 70 cm³ capacity with identical platinum electrodes (area: 0.25 cm²) using visible light (80 mW/cm²) at 25°C. The theoretical Sunlight Engineering Efficiency (SEE) was determined for both complexes and it was found that the best SEE was obtained when Fe(II)(tfac)₂ was used at a concentration of 1.5×10^–4 mol/dm³ with a thionine concentration of 1×10^–4 mol/dm³ atpH=4 in 40% aqueous acetonitrile. Effects of incident light intensity and temperature on the photogalvanic performance and the action spectrum of the present system were also investigated. A mechanism of the photoredox reaction between the Fe(II)-complex and the dye molecule is proposed.

---

Der photogalvanische Effekt von Fe(II)--Diketonat/Thionin-Systemen in wäßrigem Acetonitril

Zusammenfassung Der photogalvanische Effekt von Eisen(II)-bis-(acetonylacetonat) (Fe(II)(acac)₂) und Eisen(II)-bis-(trifluoracetylacetonat) (Fe(II)(tfac)₂ in wäßriger acetonitrilischer Thioninlösung wurde in einer photogalvanischen Zelle (70 cm³) mit identischen Platinelektroden (Fläche: 0.25 cm²) mit sichtbarem Licht (80 mW/cm²) bei 25°C untersucht. Für beide Komplexe wurde die theoretische Sunlight Engineering Efficiency (SEE) bestimmt; der beste SEE-Wert wurde für Fe(II)(tfac)₂ bei einer Konzentration von 1.5×10^–4 mol/dm³ beipH=4 in 40%igem Acetonitril gefunden (Thioninkonzentration: 1.0×10^–4 mol/dm³). Effekte, die durch Änderung der Lichtintensität und der Temperatur hervorgerufen werden, werden diskutiert. Ein Mechanismus für die Photoredoxreaktion zwischen dem Fe(II)-Komplex und dem Farbstoffmolekül wird vorgeschlagen.