Angular distributions of photoelectrons in resonantly enhanced multiphoto ionization via the 7s[1 1/2]0 1 and 8s[1 1/2]0 1 states of Xe

Photoelectron angular distributions have been measured for the three-photon resonant one-photon ionization, (3+1), of Xe via the 7s[1 1/2]⁰ ₁ and 8s[1 1/2]⁰ ₁ states. The results are in good agreement with the theoretical predictions of Tang and Lambropoulos [13] for the 8s[1 1/2]⁰ ₁, but not for the 7s[1 1/2]⁰ ₁ state. Furthermore, the results are compared to those which have been obtained by Blazewicz et al. [1] for the three-photon resonant two-photon ionization, (3+2), of Xe via the 6s[1 1/2]⁰ ₁ state.     

Correlation of the Solubilizing Abilities of 1-Butyl-1-methyl-pyrrolidinium Tris(pentafluoroethyl)trifluorophosphate, 1-Butyl-1-methylpyrrolidinium Triflate and 1-Methoxyethyl-1-methylmorpholinium Tris(pentafluoroethyl)trifluorophosphate

Chromatographic retention data were measured for a wide range of organic solutes on 1-butyl-1-methylpyrolidinium tris(pentafluoroethyl)trifluorophosphate ([BMPyrr]⁺[FAP]^?), 1-butyl-1-methylpyrrolidinium triflate, ([BMPyrr]⁺[Trif]^?), and 1-methoxyethyl-1-methylmorpholinium tris(pentafluoroethyl)trifluorophosphate, ([MeoeMMorp]⁺[FAP]^?), stationary phases at (323, 353 and 383) K. The measured retention factors were combined with published infinite dilution activity coefficient and gas-to-water partition coefficient data to yield gas-to-anhydrous ionic liquid (IL) and water-to-anhydrous IL partition coefficients. The three sets of partition coefficients were analyzed using the Abraham model. The derived Abraham model correlations describe the observed gas-to-IL (log₁₀ K) and water-to-IL (log₁₀ P) partition coefficient data to within average standard deviations of about 0.11 and 0.15 log₁₀ units, respectively.     

(Z)-1-alkylidene- and 1-arylmethylidene-5,5-dimethyl-3-oxopyrazolidin-1-ium-2-ides and their cycloaddition to N-arylmaleimides

The reaction of (Z)-1-arylmethylidene-5,5-dimethyl-3-oxopyrazolidin-1-ium-2-ides with para-substituted N-arylmaleimides at 110°C is cis-stereoselective [cis/trans-adduct ratio ??(9?C10): 1]. Under analogous conditions, the conversion of (Z)-1-(2,6-dichlorophenylmethylidene)-5,5-dimethyl-3-oxopyrazolidin-1-ium-2-ide in the reaction with N-(4-methoxyphenyl)maleimide in 6-7 h did not exceed 1?C2%. The cycloaddition of (Z)-1-ethylidene- and (Z)-1-(2-methylpropylidene)-5,5-dimethyl-3-oxopyrazolidin-1-ium-2-ides to N-arylmaleimides, regardless of the substituent in the phenyl group of the latter, gave preferentially the corresponding trans-adducts, which cannot be rationalized only by steric effect of substituents in terms of the concerted mechanism.     

Studies towards the synthesis of (1R,2S)- and (1S,2S)-1,2-epoxy-3-hydroxypropylphosphonates and (1S,2S)- and (1R,2S)-2,3-epoxy-1-hydroxypropylphosphonates

The trans-configured fosfomycin analogue, diethyl (1S,2S)-1,2-epoxy-3-hydroxypropylphosphonate, was synthesised by the intramolecular Williamson reaction of diethyl (1S,2R)-1,3-dihydroxy-2-mesyloxypropylphosphonate. The cis-analogue was obtained as O-ethyl or O,O-diethyl (1R,2S)-1,2-epoxy-3-hydroxypropylphosphonates, when (1R,2R)-1,3-dihydroxy-2-mesyloxypropylphosphonate or its 3-O-trityl derivative were used as starting materials, respectively. The intramolecular Williamson cyclisations of diethyl (1S,2R)- and (1R,2S)-1-benzyloxy-3-hydroxy-2-mesyloxypropylphosphonates led to diethyl (1S,2S)- and (1R,2S)-2,3-epoxy-1-benzyloxypropylphosphonates, respectively, with the concomitant formation of diethyl (E)-1-benzyloxy-3-hydroxyprop-1-en-1-phosphonate. From diethyl (1S,2S)- and (1R,2S)-2,3-epoxy-1-benzyloxypropylphosphonates, enantiomerically pure diethyl (1S,2S)- and (1R,2S)-1,2-dihydroxypropylphosphonates were obtained by catalytic hydrogenation, while diethyl (1S,2S)- and (1R,2S)-3-acetamido-1,2-dihydroxypropylphosphonates were produced after epoxide ring opening with dibenzylamine, acetylation and hydrogenolysis.     

Enzymatic resolution of methyl (1RS)-N-tBoc-6-hydroxy-3,4-dihydro-1H-isoquinoline-1-carboxylate by Seaprose S

An efficient biocatalytic process has been developed for the resolution of methyl (1RS)-N-tBoc-6-hydroxy-3,4-dihydro-1H-isoquinoline-1-carboxylate rac-1 by means of Seaprose S-mediated enantioselective hydrolysis to afford (1S)-2 and (1R)-1 in 87% and 93% isolated yield, 101% and 96% potency, and ee >99.8% and >99.5%, respectively.     

Rearrangements of 1-(1-methylprop-1-en-1-yl)-1,2-dimethylacenaphtyylenonium ions

It was discovered by means of dynamic NMR that the 1-(cis-1-methylprop-1-en-1-yl)-1,2-dimethylacenaphthylenonium ion generated under conditions of “long life” for carbocations underwent fast (ΔG^#35.8 kJ mol^?1 at ?103°C) degenerate 1,2-shift of the cis-dimethylvinyl group. Quantum-chemical calculations by DFT method predict lower rate of 1,2-shift for the trans-dimethylvinyl group compared to cis-dimethylvinyl group and dependence on the cations conformation of the rates of these processes and of the rearrangement mechanism into the ions of phenalenyl type.     

Über 1-Alkyl-bzw. 1-Aryl-dihydro-6-methyl-2(1H)-pyrimidinthione

The title compounds7 are formed in a general reaction by heating β-isothiocyanoketones3 with primary amines in inert solvents, or by thermal elimination of water from tetrahydro-6-hydroxy-6-methyl-2(1H)-pyrimidinethiones5, also in inert solvents. The 1-alkyl compounds can also be prepared under similar conditions from α,β-unsaturated ketones by reaction with alkylammonium rhodanides. The NMR-spectra show that the 1-substituted dihydro-6-methyl-2(1H)-pyrimidinethiones are in tautomeric equilibrium with the tetrahydro-6-methylene-2(1H)-pyrimidinethiones13. The reactivity of 1-alkyl and 1-aryldihydro-6-methyl-2(1H)-pyrimidinethiones is similar to that of dihydro-4,4,6-trimethyl-2(1H)-pyrimidinethione7 j, although their ring stability is certainly less.     

Efficient sulfonation of 1-phenylsulfonyl-1H-pyrroles and 1-phenylsulfonyl-1H-indoles using chlorosulfonic acid in acetonitrile

The sulfonation of various 1-phenylsulfonyl-1H-pyrroles and 1-phenylsulfonyl-1H-indoles using chlorosulfonic acid in acetonitrile has been studied, leading to the development of a clean and operationally simple protocol allowing direct synthesis of the corresponding 1-phenylsulfonyl-1H-pyrrole-3-sulfonyl chlorides and 1-phenylsulfonyl-1H-indole-3-sulfonyl chlorides, respectively, both of which may be easily converted to various sulfonamide derivatives by treatment with nitrogen nucleophiles. Efficient and selective removal of the phenylsulfonyl- or tosyl groups in the sulfonamide series may be achieved under mild conditions.     

The cycloaddition reaction of 3,4-dimethyl-1-thio-1-phenylphosphole with tropone

3,4-Dimethyl-1-thio-1-phenylphosphole reacts, under elevated temperatures, with tropone to give two [4+2] isomeric adducts: Endo-syn-5,6-dimethyl-3-thio-3-phenyl-3-phosphatricyclo [5.3.2.0^2,6]dodec-4,8,11-trien-10-one (1) and Endo-anti-5,6-dimethyl-3-thio-3-phenyl-3-phosphatricyclo[5.3.2.0^2,6]dodec-4,9,11-trien-8-one (2). In addition to the endo-exo,syn-anti relationship the phosphorus configuration in 1, 2 and some derivatives was also elucidated by means of NMR-shift reagents and ²J_PH coupling constants.     

Total synthesis of (+)-piericidin A1 and (−)-piericidin B1

The convergent syntheses of (+)-piericidin A₁ 1 and (?)-piericidin B₁ 2 have been achieved based on classical Julia-Lythgoe olefination between 4-hydroxy-5,6-dimethoxy-3-methyl-2-[5-oxo-3-methyl-pent-(2E)-enyl]-pyridine 3 corresponding to the left half of the final molecule, and chiral phenyl sulfones, (4R,5R)-2,4,6-trimethyl-5-methoxy-1-phenylsulfonyl-octa-(2E,6E)-diene 20 and (4R,5R)-5-tert-butyldimethylsiloxy-2,4,6-trimethyl-1-phenylsulfonyl-octa-(2E,6E)-diene 33, corresponding to the right halves. The construction of the two stereogenic centers in the right half of piericidins was achieved based on lipase-catalyzed hydrolysis of methyl (2,3)-anti-3-acetoxy-2,4-dimethyl-hex-(4E)-enoate (±)-22.     

Stereospecific preparation of symmetrical (1Z, 3Z)- and (1E, 3E)-2,3-difluoro-1,4-disubstituted-buta-1,3-dienes from 1-bromo-1-fluoroalkenes

A straightforward method to prepare symmetrical (1Z, 3Z)- and (1E, 3E)-2,3-difluoro-1,4-disubstituted-buta-1,3-dienes is described. High E/Z ratio 1-bromo-1-fluoroalkenes, prepared by isomerization from the E/Z ≈ 1:1 isomeric mixtures, reacted with Bu₃SnSnBu₃ and Pd(PPh₃)₄ to afford (1Z, 3Z)-2,3-difluoro-1,4-disubstituted-buta-1,3-dienes in good yield. (Z)-1-Bromo-1-fluoroalkenes, which were prepared by kinetic reduction from 1-bromo-1-fluoroalkenes (E/Z ≈ 1:1), can undergo similar reaction with Bu₃SnSnBu₃ and Pd(PPh₃)₄/CuI to prepare (1E, 3E)-2,3-difluoro-1,4-disubstituted-buta-1,3-dienes.     

Observation of the electric-field-inducedE1 transition between 5s4d 1 D 2 and 5s 2 1 S 0 levels in Sr I

The angular distribution of the electric-field-inducedE1 radiation is asymmetric with respect to the external electric field direction. Measurement of this asymmetry for the 5s4d ¹ D ₂ → 5s ^{2 1} S ₀ transition in strontium permits the experimental determination of the 5s5p ¹ P ₁ → 5s4d¹ D ₂ decay rate. The result is:A(¹ P ₁ →¹ D ₂)=(4.37±0.93±0.66) × 10³ s ^?1.     

Steric mode of enzymic hydroxylation at primary carbon atoms: Hydroxylation of (1R)- and (1S)-[1-3H, 2H, 1H][1-14C]-octanes by Pseudomonas Oleovorans

(1R)- and (1S) [1-³H, ²H, ¹H]-octanes and mixed with [1-¹⁴C]-octane, were synthesized. The mixed samples were incubated with homogenats of P. oleovorans strain TF4-1L and the biosynthesized mixtures of octanols isolated. It was shown that mainly the achiral termini [-C¹H₃] were hydroxylated and that chiral methyls were oxygenated to the extent of 20–30%. In all instances the products derived from hydroxylation at the chiral methyls [-C-³H, ²H, ¹H] were mixtures of (1R)- and (1S)-octanols, the major component of which was the alcohol obtained by displacement of ¹H. The results indicate that hydroxylation proceeded with a normal isotope effect k_h>k_d>k_t. The amount of (1R)-octanol in the mixtures of octanols derived from (1R)- and (1S)-octane was determined. It was found that the C-1 hydroxylation of octane proceeded with retention, i.e. the incoming hydroxyl assumed the orientation of the displaced hydrogen (or isotopic hydrogen) atom.     

Fine structure of the 1s5f and 1s5g levels of He I

The fine structure of the 1s5f and 1s5g levels of He I was measured using microwave spectroscopy. The helium atoms were excited by ion impact, and the eleven allowed 1s5f ^2S+1 F _J –1s5g ^2S′+1 G _J , transitions near ν≈15 GHz were induced and detected by measuring the 1s4d–1s2p or 1s3d–1s2p spectral-line intensities of the impact radiation as a function of the microwave frequency. The measured transition frequencies are in accord with theoretical values and, except for one transition frequency, with earlier experimental data. The existing discrepancy between these earlier data and theory could be solved.     

Chromium-mediated fluoroalkenylation reactions of 1,1-dibromo-1-fluoroalkane and 1-bromo-1-fluoroalkene derivatives

CrCl₂- and NiCl₂-mediated coupling reactions of E/Z mixture of 1-bromo-1-fluoroalkenes with aldehydes proceeded in a high stereoselectivity to give the corresponding (Z)-2-fluoroallylic alcohol derivatives. On the other hand, in the reaction of 1,1-dibromo-1-fluoroalkane with CrCl₂, (Z)-fluoroalkene derivative was formed via α-elimination reaction of the chromium carbenoid intermediate accompanying the concomitant 1,2-shift of β-hydrogen.     

Calorimetric study of thermodynamics of production of polybutene-1, polypentene-1, 4-methylpentene-1 and properties of reagents between 0 and 670 K

The heat capacitiesC ₀ ^p of polybutene-1, polypentene-1, poly-4-methylpentene-1 and 4-methylphentene-1 were studied calorimetrically from 6 to (500–700) K. Temperatures, enthalpies of melting of various crystalline forms and the parameters of the glass transition were determined. The thermodynamic functionsH ⁰(T)?H⁰(0), S⁰(T) andG ⁰(T)?H⁰ (0) were calculated between 0 K and (500–700) K. From the calorimetric values obtained and literature data, the thermodynamic characteristics of the following processes were estimated for the corresponding alkenes-1, andcis-andtrans-alkenes-2: the polymerization of alkenes-1, the monomer-isomerization polymerization ofcis- andtrans-alkenes-2 to polyaklenes-1 and the isomerization ofcis- andtrans-aklenes-2 to alkenes-1 in the same temperature interval at standard pressure.     

Densities and viscosities for binary mixtures of phenetole with 1-pentanol, 1-hexanol, 1-heptanol, 1-octanol, 1-nonanol,and 1-decanol at different temperatures

Density (ρ) and viscosity (η) values of the binary mixtures of phenetole+1-pentanol, + 1-hexanol, + 1-heptanol, + 1-octanol, + 1-nonanol, and + 1-decanol over the entire range of mole fraction at 293.15, 298.15, 308.15, and 318.15 K have been measured at atmospheric pressure. The excess molar volume (V^E), viscosity deviations (Δη), and excess Gibbs energy of activation (G*^E) have been calculated from the experimental measurements. These results were fitted to Redlich and Kister polynomial equation to estimate the binary interaction parameters. The viscosity data were correlated with equations of Grunberg and Nissan, Hind et al., Frenkel, and McAllister. While the excess molar volumes of phenetole+1-pentanol, + 1-hexanol are positive, the remaining binary mixtures are negative. The viscosity deviations and excess Gibbs energy of activation are negative for all investigated systems. As the chain length of 1-alkanols increases, both viscosity deviations and excess molar volume values decrease while excess Gibbs energy of activation value increase. The temperature has no effect on excess molar volume, slight effect on excess Gibbs energy of activation, and significant effect on viscosity deviations. The calculated functions have been used to explain the intermolecular interaction between the mixing components.     

The molecular orientation of CO on Pd(1 1 1): a polarization-dependent SFG study

The molecular orientation of carbon monoxide adsorbed on Pd(1 1 1) was examined by sum frequency generation (SFG) vibrational spectroscopy utilizing different polarization combinations of the visible and SFG light. This allows to determine the CO tilt angle with respect to the substrate, provided that a proper optical model for the interface can be defined. It is demonstrated that it is essential to invoke the β_aac hyperpolarizability into the analysis and that polarization-dependent SFG of CO/Pd(1 1 1) yields information on β_aac/β_ccc rather than the tilt angle.     

Quest for experimental M1 and E1-intercombination transition probabilities in few-electron Xe ions

The experimental access to M1 transition probabilities within thens ² np ^k (1 ≦k ≦ 5) ground state configurations of highly ionized atoms is outlined. A test experiment on Xe^(45–50)+ yielded first spectra and decay curves of the 2s ^{2 1} S ₀ ? 2s2p ³ P ₁ ⁰ intercombination transition in Xe⁵⁰⁺ and of M1 transitions within the 2s ² 2p ^k (1 ≦k ≦ 5) ground configurations. The data compare well only with theoretical predictions which take the Lamb shift into account. Problems and prospects for better measurements are discussed.     

The 1B1u ← 1A1g 0—0 transition in crystal benzene

The transition linewidth ΔE in crystal C₆H₆, C₆D₆ and sym-C₆H₃D₃ has been measured as a function of temperature T from 4.2 to 135°K, and it extrapolates to a common value of ΔE_o = 50 cm^? at O°K. In C₆H₆ ΔE = (50 + 7T^{$\text{1}\text{2}$}) cm^?1, indicative of strong exciton—phonon coupling, and there is a line shift of +40 cm^?1 per substituent deuteron. Fluorescence excitation spectral data are used to separate the ¹B_1u(= S₂) decay rate k_H = 9.4 × 10¹² sec^?1, derived from ΔE₀, into S₂S₁ internal conversion (rate ≈ 6.6 × 10¹² sec^?1) and S₂S_x (channel 3) internal conversion (rate ≈ 2.8 × 10¹² sec^?1. A similar value of k_H = 9.9 × 10¹² sec^?1 is obtained from the S₂S_o fluorescence quantum yield of liquid benzene.