New chemical and chemo-enzymatic routes for the synthesis of (RS)- and (S)-enciprazine

The chemo-enzymatic synthesis of racemic and enantiopure (RS)- and (S)-enciprazine 1, a non-benzodiazepine anxiolytic drug, is described herein. The synthesis started from 1-(2-methoxyphenyl) piperazine 3, which was treated with 2-(chloromethyl) oxirane (RS)-4 using lithium bromide to afford a racemic alcohol, 1-chloro-3-(4-(2-methoxyphenyl) piperazin-1-yl) propan-2-ol (RS)-6 in 85% yield. Intermediate (S)-6 was synthesized from racemic alcohol (RS)-6 using Candida rugosa lipase (CRL) with vinyl acetate as the acyl donor. Various reaction parameters such as temperature, time, substrate, enzyme concentration, and the effect of the reaction medium on the conversion and enantiomeric excess for the transesterification of (RS)-6 by CRL were optimized. It was observed that 10 mM of (RS)-6, 50 mg/mL of CRL in 4.0 mL of toluene with vinyl acetate (5.4 mmol) as acyl donor at 30 °C gave good conversion (C = 49.4%) and enantiomeric excess (ee_P = 98.4% and ee_S = 96%) after 9 h of reaction. Compound (S)-6 is a key intermediate for the synthesis of enantiopure (S)-1. The (RS)- and (S)-enciprazine drug 1 was synthesized by treating (RS)- and (S)-6 with 3,4,5-trimethoxyphenol 5 using MeCN as a solvent and K₂CO₃ as a base.     

Synthesis and characterization of novel intramolecularly O,C,O-coordinated heteroleptic organostannylenes and their tungstenpentacarbonyl complexes

The syntheses are reported of the novel heteroleptic organostannylenes [2,6-(ROCH₂)₂C₆H₃]SnCl (1, R = Me; 2, R = t-Bu) and of their tungstenpentacarbonyl complexes [2,6-(ROCH₂)₂C₆H₃](X)SnW(CO)₅ (3, X = Cl, R = Me; 4, X = Cl, R = t-Bu; 5, X = H, R = Me). The compounds were characterized by means of elemental analyses, ¹H, ¹³C, ¹¹⁹Sn NMR spectroscopies, electrospray mass spectrometry and in case of 3 and 4 also by single crystal X-ray diffraction analysis. For the two latter compounds the substituents bound at the ether oxygen atom control the strength of intramolecular O → Sn coordination. Thus, the O–Sn distances amount to 2.391(5)/2.389(5) (3) and 2.464(3)/2.513(3) Å (4).     

Dialkyl- and diaryl-platinum(II) complexes with secondary phosphines: Preparation,structure and thermal reaction giving the metallopolymer

Alkyl and arylplatinum complexes with 1,5-cyclooctadiene ligand, [PtR₂(cod)] (R = Me, Ph, C₆H₄-p-CF₃, C₆F₅), react with secondary phosphines, PHR′₂ (R′ = i-Bu, t-Bu, Ph), to afford the mononuclear platinum complexes, cis-[PtR₂(PHR′₂)₂] (1a: R = Me, R′ = i-Bu; 1b: R = Me, R′ = t-Bu; 1c: R = Me, R′ = Ph; 2a: R = Ph, R′ = i-Bu; 2b: R = Ph, R′ = t-Bu; 2c: R = R′ = Ph; 3a: R = C₆H₄-p-CF₃, R′ = i-Bu; 3b: R = C₆H₄-p-CF₃, R′ = t-Bu; 3c: R = C₆H₄-p-CF₃, R′ = Ph; 4a: R = C₆F₅, R′ = i-Bu; 4c: R = C₆F₅, R′ = Ph) in 81–98% yields. Molecular structures of the complexes except for 1a, 1c and 2a were determined by X-ray crystallography. Complex 1b has a square-planar structure with Pt–C(methyl) bonds of 2.083(8) and 2.109(8) Å, while the Pt–C(aryl) bonds of 2b–c, 3a–c, 4a and 4c (2.055(1)–2.073(8) Å) are shorter than them. Thermal decomposition of 1b, 2a–c, and 3a–c releases methane, biphenyl or 4,4′-bis(trifluoromethyl)biphenyl as the organic products, which are characterized by NMR spectroscopy. The solid product of the thermal reactions of 2b and 2c were characterized as the metallopolymers formulated as [Pt(PR′₂)₂]_n (5b: R′ = ^tBu; 5c: R′ = Ph), based on the solid-state NMR and elemental analyses.     

A convenient chromatography-free access to enantiopure 6,6′-di-tert-butyl-1,1′-binaphthalene-2,2′-diol and its 3,3′-dibromo,di-tert-butyl and phosphorus derivatives: utility in asymmetric synthesis

A simple chromatography-free high-yielding synthesis of the hexane-soluble enantiopure 6,6′-di-tert-butyl-1,1′-binaphthalene-2,2′-diol 3 (6,6′-di-tert-butyl BINOL) using Friedel–Crafts reaction on 1,1′-binaphthalene-2,2′-diol 1 (BINOL) is described. The enantiomeric purity was fully maintained in the reaction. Compound 3 has been used as an entry point for the convenient chromatography-free synthesis of 3,3′,6,6′-tetra-tert-butyl BINOL 4 and 3,3′-dibromo-6,6′-di-tert-butyl BINOL 5. A straightforward route to enantiopure bisphosphites [(6,6′-R₂C₂₀H₁₀O₂)P]₂[O₂C₂₀H₁₀-6,6′-R₂] [R = H 15, t-Bu 16] by simply reacting phosphorochloridite (6,6′-R₂C₂₀H₁₀O₂)PCl [R = H 20, t-Bu 6] with metallic sodium is highlighted. The identity of 15 and 16 as their selenium-oxidized products 17 and 18 (at phosphorus center) is confirmed by X-ray crystallography (17 in the enantiopure form and 18 as racemate). Various enantiopure phosphoramidites of the modified BINOL have been synthesized. It is established that even when the phosphoramidites derived from the unsusbstituted BINOL 1 fail to give an appreciable optical induction in the asymmetric reduction of acetophenone/phenacyl chloride, those derived from 3 do induce moderate chiral induction (up to 30% ee in the case for acetophenone and 43% ee in the case of phenacyl chloride), thus leaving scope for further improvement in ee for related reactions.     

Spontaneous resolution among chiral glycerol derivatives: crystallization features of ortho-alkoxysubstituted phenyl glycerol ethers

Five chiral arylglycerol ethers 2-R-C₆H₄-O-CH₂CH(OH)CH₂OH (R = OMe, OEt, OPrⁿ, OPrⁱ, OBu^t) have been prepared in racemic and enantiopure form. The melting points and enthalpies of fusion of every species were measured by differential scanning calorimetry. Binary phase diagrams were reconstructed for the whole family, the entropies of the mixing of the enantiomers in the liquid state, and Gibbs free energy of formation of the racemic compound, as well as Pettersson i-values were derived from the thermal data. The differences in the phase behavior of the investigated compounds were associated with the conformations of the alkoxy fragments.     

Reactivity of intramolecularly coordinated aluminum compounds to R3EOH (E = Sn,Si). Remarkable migration of N,C,N and O,C,O pincer ligands

The reaction of organoaluminum compounds containing O,C,O or N,C,N chelating (so called pincer) ligands [2,6-(YCH₂)₂C₆H₃]AlⁱBu₂ (Y = MeO 1, ^tBuO 2, Me₂N 3) with R₃SnOH (R = Ph or Me) gives tetraorganotin complexes [2,6-(YCH₂)₂C₆H₃]SnR₃ (Y = MeO, R = Ph 4, Y = MeO, R = Me 5; Y = ^tBuO, R = Ph 6, Y = ^tBuO, R = Me 7; Y = Me₂N, R = Ph 8, Y = Me₂N, R = Me 9) as the result of migration of O,C,O or N,C,N pincer ligands from aluminum to tin atom. Reaction of 1 and 2 with (ⁿBu₃Sn)₂O proceeded in similar fashion resulting in 10 and 11 ([2,6-(YCH₂)₂C₆H₃]SnⁿBu₃, Y = MeO 10; Y = ^tBuO 11) in mixture with ⁿBu₃SnⁱBu. The reaction 1 and 3 with 2 equiv. of Ph₃SiOH followed another reaction path and ([2,6-(YCH₂)₂C₆H₃]Al(OSiPh₃)₂, Y = MeO 12, Me₂N 13) were observed as the products of alkane elimination. The organotin derivatives 4–11 were characterized by the help of elemental analysis, ESI-MS technique, ¹H, ¹³C, ¹¹⁹Sn NMR spectroscopy and in the case 6 and 8 by single crystal X-ray diffraction (XRD). Compounds 12 and 13 were identified using elemental analysis,¹H, ¹³C, ²⁹Si NMR and IR spectroscopy.     

Synthesis,structures and full characterization of p-tert-butylcalix[5]arene mono-, di-, tri- and pentaanionic ligand precursors

The synthesis, complete characterization, and solid state conformation of a new series of p-tert-butylcalix[5]arene (Bu^tC5) mono-, di-, tri- and pentaanions are reported. X-ray structures of the alkali metal salts illustrate the strong influence of the alkali metal ion on the structure of the calixanion. The strength of the alkali metal base and its reaction stoichiometry play an important role in the conformation and level of deprotonation of the resulting anion. Reaction of Bu^tC5 in a 2:1 molar ratio with alkali metal bases M₂CO₃ (M = Rb, Cs), or in a 1:1 ratio with M₂CO₃ (M = Na, K), MOH (M = Na, K, Rb, Cs) or MH (M = Li, Na) produces Bu^tC5 monoanions, but Bu^tC5 reacts in a 1:1 molar ratio with M₂CO₃ (M = Rb, Cs) or a 1:2 molar ratio with MOC(CH₃)₃ (M = Na, K) to afford Bu^tC5 dianions. Due to the steric bulkiness of the Bu^t group no polymeric structures are observed. Alkali metal salts of trianionic Bu^tC5 were obtained in high yields from reactions of Bu^tC5 with MOC(CH₃)₃ (M = Li, Na, K), BuⁿLi, LiH and LiOH in a 1:3 molar ratio. Pentaanionic Bu^tC5 salts were obtained by the reaction with MOC(CH₃)₃ (M = Li, Na, K) or BuⁿLi in a 5:1 ratio. X-ray crystal structures of Bu^tC5 · Na and Bu^tC5 · Cs indicate that the size of the alkali metal influences the level of cation-π arene interactions and therefore the conformation of the Bu^tC5 unit; for example, Bu^tC5 · Na has a cone conformation while Bu^tC5 · Cs shows a flattened cone conformation. Cation-π arene interactions are observed in most of the calixarene salts.     

Syntheses,structures and single-molecule magnetic behaviors of two dicubane Mn4 complexes

The reaction of MnX₂ · 4H₂O (X = Cl or Br) with 2,6-bis(hydroxymethyl)-4-methylphenol (H₃L) and NaOH in methanol solution yielded two tetranuclear manganese complexes, [Mn₄(HL)₄(MeOH)₄Cl₂] (1) and [Mn₄(HL)₄(MeOH)₄Br₂] (2). Both compounds crystallize in the monoclinic space group C₂/c with cell parameters: a = 26.0945(19) Å, b = 11.4999(8) Å, c = 21.2188(16) Å, β = 121.050(1)° and z = 4 for 1 · 2Et₂O; a = 25.8145(3) Å, b = 11.6734(2) Å, c = 21.3956(3) Å, β = 120.1277(6)° and z = 4 for 2 · 2Et₂O. Both complexes consist of a mixed-valence dicubane structure, which comprises two Mn^II and two Mn^III ions. Magnetic susceptibilities and magnetization of complexes 1 and 2 in the solid state indicate that two clusters have an S = 9 ground state. Frequency-dependent out-of-phase signals of alternating current magnetic susceptibilities were observed in the low temperature range (<3 K) for both complexes indicating a slow magnetic relaxation.     

Copper(II)-methylmalonate complexes with unidentate N-donor ligands: Syntheses,structural characterization and magnetic properties

Two new methylmalonate-bridged copper(II) complexes with the formulas [Cu(3-Ipy)(Memal)(H₂O)] (1) and [Cu(2,4′-bpy)(Memal)(H₂O)] · 3H₂O (2) [Memal = methylmalonate dianion, 3-Ipy = 3-iodopyridine, 2,4′-bpy = 2,4′-bipyridine] have been synthesized and characterized by X-ray diffraction. Both compounds crystallize in the monoclinic space group P2₁/n and Z = 4, with unit cell parameters a = 8.5874(13) Å, b = 7.1738(14) Å, c = 19.093(5) Å, β = 99.509(15)° in 1 and a = 17.375(4) Å, b = 7.3305(14) Å, c = 14.247(3) Å, β = 111.409(15)° in 2. The structures of 1 and 2 consist of zigzag chains of anti-syn carboxylate-bridged copper(II) ions running along the b direction. The pyridine-like ligands occupy one equatorial position of the copper environment avoiding the formation of the sheet-like arrangement observed in previously reported Memal complexes. The chains are grouped together in hydrophilic layers through hydrogen bonds and the layers are pillared through the 3-Ipy (1) and 2,4′-bpy (2) ligands which are stacked through π–π interactions involving alternatively aromatic ligands from two adjacent chains. Magnetic susceptibility measurements of both compounds in the temperature range 2–290 K show the occurrence of intrachain ferromagnetic interactions between the copper(II) ions [J = +2.66(2) cm^?1 (1) and J = +2.62(2) cm^?1 (2)].     

Electrochemical and magnetic properties of inorganic polymers constructed from Mn(II)/Co(II)-substituted heteropolymolybdates

Two inorganic polymers constructed from transition metal-substituted heteropolymolybdates, [(CH₃)₃NH]_5n[PMo₁₁MO₃₉]_n·xH₂O (M = Mn²⁺, x = n (1); M = Co²⁺, x = 2n (2)), have been synthesized in aqueous solutions and characterized by IR, TGA, and single-crystal X-ray diffraction analysis. Crystal data: 1, monoclinic, C2/c, a = 17.1322(7) Å, b = 17.6062(7) Å, c = 17.6459(7) Å, β = 103.2220(10)°, V = 5181.5(4) Å³ and Z = 4; 2, triclinic, P-1, a = 12.1986(7) Å, b = 13.0973(7) Å, c = 16.7736(9) Å, α = 97.1810(10)°, β = 98.5040(11)°, γ = 96.3920(10)°, V = 2606.5(2) Å³ and Z = 2. The cyclic voltammograms of 1 and 2 show irreversible redox peaks in DMF solution and there are three reversible couples after addition of 0.1 M H₂SO₄ aqueous solutions. The cyclic voltammograms of 1/2-modified carbon paste electrode (1-CPE/2-CPE) show two consecutive reversible two-electron redox processes. Especially, 2-CPE shows good electrocatalytic activity toward the reduction of nitrite and hydrogen peroxide. The magnetic properties of the two complexes have also been investigated.     

Lipase-catalyzed kinetic and dynamic kinetic resolution of 1,2,3,4-tetrahydroisoquinoline-1-carboxylic acid

A dynamic kinetic resolution method for the preparation of enantiopure 1,2,3,4-tetrahydroisoquinoline-1-carboxylic acid (R)-2 was developed involving the CAL-B-catalyzed enantioselective hydrolysis of the corresponding ethyl ester (±)-1 in toluene/acetonitrile (4:1) containing 1 equiv of added water and 0.25 equiv of dipropylamine. This method allowed the preparation of (R)-2 (ee = 96%) with 80% isolated yield. The kinetic resolution of (±)-1 in diisopropyl ether at 3 °C afforded both enantiomers with ee ⩾92%.     

Chiral linear polymers bonded alternatively with salen and 1,4-dialkoxybenzene: synthesis and application for Ti-catalyzed asymmetric TMSCN addition to aldehydes

The synthesis of chiral linear polymers 1a–b having salen and 1,4-dioctyloxybenzene as alternate segments has been accomplished. The GPC analysis showed the molecular weights corresponding to ca. 15 (M_w = 10,999, M_n = 9165 and PDI = 1.20) repeating units for 1a and ca. 8 (M_w = 8547, M_n = 7883 and PDI = 1.08) repeating units for 1b. Polymers 1a–b have been studied with Ti(OⁱPr)₄ as a recyclable catalyst for the asymmetric addition of TMSCN to aldehydes while the selectivity of the polymer catalyst is identical to that of the monomer. The reactions are efficient affording the cyanohydrins with up to 88% ee. The selectivity of the polymer based catalyst 9a is found to be the same to that of the monomer 10a. The reaction provides the advantages of simplified product isolation and easy recovery and recyclability of polymer catalyst 9a without any loss of activity or selectivity.     

Candida antarctica lipase B-catalyzed ring opening of 4-arylalkyl-substituted β-lactams

The Lipolase-catalyzed ring opening of racemic 4-benzyl- 3 and 4-phenylethyl-2-azetidinone 4 was performed with 0.5 equiv of H₂O in diisopropyl ether at 45 °C. The resulting (S)-β-amino acid 5 or 6 (ee ⩾ 87%) and (R)-β-lactam 7 or 8 (ee >99%) enantiomers could easily be separated. The ring opening of enantiomeric β-lactams with 18% aqueous HCl afforded the corresponding enantiopure β-amino acid hydrochlorides 9 and 10 (ee >99%).     

Spontaneous resolution of a novel chiral coordination polymer through supramolecular interactions and solvent symmetry breaking

The spontaneous resolution reaction of racemic trans-2,3-dihydro-2,3-dipyridyl-benzo[e]indole 1 with Cd(ClO₄)₂·6H₂O in the presence of 2-butanol under solvothermal reaction conditions favors the formation of crystal 2 [P-Cd(R,R,-1)₂(ClO₄)₂], while a similar reaction in the presence of ethanol only favors the formation of crystal 3 [M-Cd(S,S,-1)₂(ClO₄)₂]. The crystal structural determination shows that both 2 and 3 crystallize in chiral enantiomorphous space groups (P6₁22 and P6₅22) and their structures are 1D infinite chain, and are just enantiomorphous pairs most like. The spontaneous resolution process displays estimated ee values of ca. +0.6 for 2-butanol and ca. −0.4 for ethanol. Enantiomerically pure (S,S)-trans-2,3-dihydro-2,3-dipyridyl-benzo[e]indole (S,S,-1) can be obtained through the decomposition of mechanically separated 3. Additionally (S,S,-1) also crystallizes in a chiral space group (P2₁). The CD (circular dichroism) spectra of both 2 and 3 in the solid state are also approximately enantiomorphous pairs. However, their fluorescent spectra in the solid state display a moderate difference in maximum emission peaks (Δλ = 19 nm). Crystal data for 2: C₄₄H₃₄Cl₂N₆O₈Cd, M = 958.07, hexagonal, P6₁22, a = 10.5488(5), c = 68.256(4) Å, α = γ = 90°, β = 120°, V = 6577.8(6) Å³, Z = 6, D_c = 1.451 mg m⁻³, R₁ = 0.0498, wR₂ = 0.1124, μ = 0.679 mm⁻¹, S = 0.623, Flack χ = −0.02(6). For space group P6₅22, R₁ = 0.0670, wR₂ = 0.1602, S = 0.725 with a Flack value of 1.03(7); Crystal data for 3, C₄₄H₃₄Cl₂N₆O₈Cd, M = 958.07, hexagonal, P6₅22, a = 10.5446(3), c = 68.265(3) Å, V = 6573.3(4) Å³, Z = 6, D_c = 1.452 mg m⁻³, R₁ = 0.0444,wR₂ = 0.1002, μ = 0.679 mm⁻¹, S = 0.558, Flack χ = 0.01(5). For space group P6₁22, R₁ = 0.0501, wR₂ = 0.1178, S = 0.599 with a Flack value of 1.00(5). The low Flack parameter indicates that the absolute configurations of 2 and 3 are stated; Crystal data for (S,S)-1, C₂₂H₁₇N₂, M = 323.39, orthorhombic, P2₁2₁2₁, a = 9.2598(7), b = 9.4617(8), c = 19.1452(16) Å, V = 1677.4(2) Å³, Z = 4, D_c = 1.281 mg m⁻³, R₁ = 0.0417, wR₂ = 0.1191, T = 293 K, μ = 0.077 mm⁻¹, S = 0.862.     

Synthesis and structure of a new scorpionate-dithio carboxyl oxovanadium complex and an organic dithio carboxyl compound

A new complex of oxovanadium(IV), V₂O₂[(HB(pz)₃)₂(pyrro)₂ (1) and a dimer-dithio carboxyl compound (C₅H₈NS₂)₂ (2) have been synthesized by the reaction of VOSO₄·nH₂O with NaHB(pz)₃ and pyrrolidine dithio carboxylic acid ammonium salt. They were characterized by element analysis, IR spectra, UV–vis spectra and X-ray diffraction. Structural analyses of 1 and 2 gave the following parameters: 1, triclinic, P-1, a = 7.732(4) Å, b = 14.285(8) Å, c = 17.802(9) Å, α = 101.314(8)°, β = 92.682(9)°, γ = 92.228(9)°, V = 1923.6(18) Å³, and Z = 4; 2, monoclinic, C2/c, a = 13.857(2) Å, b = 10.4213(18) Å, c = 9.436(2) Å, β = 97.099(2), V = 1352.1(4) Å³, and Z = 4. In complex 1, vanadium atom adopts a distorted tetragonal bipyramid structure, which is typical for oxovanadium(IV) complexes. Compound 2 is a dimer-dithio carboxyl compound with S–S bond. In addition, thermal analysis was performed for analyzing the stabilization of the complexes.     

Synthesis,crystal structure and thermal behaviour of [La(hfa)3(Phen)2] (hfa = hexafluoroacetylacetonate,Phen = o-phenanthroline)

The mixed ligand complex [La(hfa)₃(Phen)₂] (I) was obtained by the interaction of La(hfa)₃ and Phen; its composition does not depend on the stoichiometry of the reagents. According to the X-ray single crystal analysis data, complex I crystallizes in the monoclinic space group P2₁/n, with a = 13.583(3) Å, b = 16.959(3) Å, c = 18.860(4) Å, β = 94.71(3)° and Z = 4. The structure of I consists of isolated mononuclear molecules, the coordination number of La being 10. Thermal behaviour and composition of the vapor phase have been studied for I by thermal analysis and mass-spectrometry using a Knudsen cell. The mixed ligand complex I was found to sublime congruently in the temperature range 370–460 K: [La(hfa)₃(Phen)₂]_(s) = [La(hfa)₃(Phen)]_(g) + Phen_(g), Δ_rH⁰(T) = 316.2 ± 1.8 kJ/mol.     

Chiral 1,4-morpholin-2,5-dione derivatives as α-glucosidase inhibitors: Part 2

A series of chiral 1,4-morpholin-2,5-dione derivatives were synthesized starting from chiral synthons 1 and 2, diastereomeric monolactim ethers derived from l-valine. The compounds investigated, were inactive toward β-glucosidase, α-mannosidase and α-galactosidase but behave as noncompetitive inhibitors against the α-glucosidase (from Saccharomices cervisiae) with some showing a good inhibition ability (0.05 < K_i < 0.18 mM).     

Crystal structures and magnetic properties of complexes of M(NO3)2; M = MnII,CoII, NiII,and CuII,with pyridine ligands carrying an aminoxyl radical

Four complexes of M(NO₃)₂(4NOPy-OMe)₂, (4NOPy-OMe = 4-(N-tert-butyloxylamino)-2-(methoxymethylenyl)pyridine, and M = Mn^II, 1; Co^II, 2; Ni^II, 3; Cu^II, 4), were prepared and fully characterized. X-ray single crystal analysis reveals that four complexes are isostructural. The molecular structures are distorted octahedral in which the methoxy oxygen atoms coordinate to the metal ion by trans-configuration while the pyridyl nitrogen atoms and the nitrate oxygen atoms coordinate by cis-configuration. The magnetic properties of all complexes were investigated by SQUID magneto/susceptometry. Temperature dependence of the molar magnetic susceptibilities in the temperature range of 2–300 K indicated that the magnetic coupling between aminoxyl radicals and metal ion was antiferromagnetic in the complex 1 and were ferromagnetic in the complexes 2–4. The quantitative analysis based on the spin Hamiltonian, H = −2J(S₁S_M + S_MS₂) yielded the best fit as J/k_B = −13.4 ± 0.1 K, g = 1.94 ± 0.002, and θ = −0.78 ± 0.02 K for the complex 1, J/k_B = 48.7 ± 2.1 K, g = 2.07 ± 0.02, and θ = −2.83 ± 0.41 K for the complex 3 (the data in the temperature range 300–50 K were used), and J/k_B = 57.0 ± 1.2 K, g = 2.002 ± 0.004, and θ = −9.8 ± 0.1 K for the complex 4.     

Activation of C–H bonds of hydrocarbons by the ArH–alkali metal systems in THF (ArH – naphthalene,biphenyl, anthracene,phenanthrene, trans-stilbene,pyrene). Alkylation of naphthalene and toluene with ethene

Systems based on naphthalene and alkali metals (Li, Na, K) in THF are able to induce the alkylation of naphthalene with ethene at room temperature and atmospheric pressure. The highest activity in this reaction is exhibited by the naphthalene–potassium system which converts naphthalene into 1-ethylnaphthalene (1) and small amounts of two isomeric dihydro derivatives of 1 in a yield of 85% (24 h, K:C₁₀H₈ = 2:1). The same alkylation products are formed when metallic sodium is used instead of potassium. The interaction of ethene with the naphthalene–lithium system (24 h, Li:C₁₀H₈ = 2:1) affords 1 together with 1-n-butylnaphthalene (4), 1-n-hexylnaphthalene (5), 1-n-oktylnaphthalene (6) and dihydro derivatives of 5 and 6 in a total yield of 60%. Alkylation of toluene with ethene in the naphthalene–alkali metal systems leads to the formation of higher monoalkylbenzenes. The greatest toluene conversion (48%, 24 h) is observed on using the lithium-containing system (Li:C₁₀H₈ = 2:1), in the presence of which a mixture of n-propylbenzene (11), n-pentylbenzene (12), 3-phenylpentane (13) and 3-phenylheptane (14) is produced from ethene and toluene. On the replacement of lithium by sodium or potassium, only 11 and 13 are obtained. A treatment of biphenyl, phenanthrene, trans-stilbene, pyrene and anthracene with alkali metals in THF also gives systems capable of catalyzing the alkylation of toluene with ethene at 22 °C. Of particularly active is the stilbene–lithium system (Li:stilbene = 3:1) which converts toluene into a mixture of 11–14, n-heptylbenzene and 5-phenylnonane in a yield of 58%. In all cases, the rate of the alkylation considerably increases in the presence of the solid phase of alkali metal. The mechanism of the reactions found is discussed.     

Rhizopus arrhizus-mediated asymmetric reduction of arylalkanones: unusual anti-Prelong products with benzyl alkyl ketones

Rhizopus arrhizus-mediated microbial reduction of various aryl alkyl ketones afforded chiral carbinols in good yields and high enantiomeric purity. The most striking feature was the formation of the anti-Prelog (R)-alcohols with the benzyl alkyl ketones, while the other ketones ArXCOR (X = (CH₂)_n, n = 0 or 2, OCH₂ or SCH₂ and R = Me/Et/n-Bu) furnished (S)-alcohols.