Stereoselective reduction of β hydroxyketones to 1,3-diols highly selective 1,3-asymmetric induction via boron chelates

Highly selective asymmetric induction can be achieved in the reduction of acyclic β-hydroxyketones via boron chelates. Treatment of β-hydroxyketones (1) with tributyl or tri-isobutylborane and successively with sodium borohydride afforded syn-1,3-diols (3) in highly stereo-selective manner, Syn -α-substituted-β -hydroxyketones (8) were also reduced to give syn, syn-1,3-diols (9) exclusively. The reaction was further applied to the convenient preparation of 3-deoxy-hexoses.     

Chemistry of Dioxacyclanes: X. Synthesis and Properties of Chlorinated 1,3-Dioxolanes Derived from 4-Cyclohexenecarbaldehydes

4-Cyclohexenecarbaldehyde, its 2-methyl-, 4-methyl-, 2'4-dimethyl derivatives werereacted with 1,2-diols [1,2-propanediol and 3-chloro-, 3-(2-chloroethoxy)-, and 3-(2-chloro-1-chloromethyl-ethoxy-1,2-propandiol] to synthesize the corresponding 2,4-disubstituted 1,3-dioxolanes. Epoxidation and bromination of the products were performed, as well as their condensation with hexachlorocyclopentadiene.     

Glycosylidene Carbenes. Part 14. Glycosidation of partially protected galactopyranose-, glucopyranose-, and mannopyranose-derived vicinal diols

The relation between H-bonding in diequatorial trans-1,2 and axial, equatorial cis-1,2-diols and the regioselectivity of glycosidation by the diazirine 1 was examined. H-Bonds were assigned on the basis of FT-IR and ¹H-NMR spectra (Fig. 1). Glycosidation by 1 of the gluco-configurated diequatorial trans-2,3-diols 4–7 yielded the mono-glucosylated products 16/17/20/21 (69–89%); 1,2-/1,3-linked products (37–46:63–54), 24/25/28/29 (60–63%; 1,2-/1,3-linked products 46–51:54–49), 32–35 (69–94%; 1,2-/1,3-linked products 45–52:55–48), and 36/37/40/41 (59–63%; 1,2-/1,3-linked products 52–59:48–41), respectively (Scheme 1, Table 3). The disaccharides derived from 4, 5 , and 7 were characterized as their acetates 18/19/22/23, 26/27/30/31 , and 38/39/42/43 , respectively. Glycosidation of the galacto-configurated diequatorial 2,3-diols 8 and 9 and the manno-configurated diequatorial 3,4-diol 10 by 1 (Scheme 2, Table 3) also proceeded in fair yields to give the disaccharides 44–47 (69–80%;1,2-/1,3-linked products ca. 1:1), 48–51 (51–61%;1,2/-1,3-linked products 54–56:56–54), and 56/57/60/61 (71–80%; 1,3-/1,4-linked products 49–54:51–46), respectively. The 1,3-linked disaccharides 56/57 derived from the diol 10 were characterized as the acetates 58/59 . The regio- and stereoselectivities of the glycosidation by 1 were much better for the α-D -manno-configurated axial, equatorial cis-2,3-diol 11 and the galacto-configurated axial, equatorial cis-3,4-diol 13 (1,2-/1,3-linked disaccharides ca. 3:7 for 11 and 1,3-/1,4-linked disaccharides ca. 4:1 for 13 ; Scheme 3, Table 4). The regio- and stereoselectivity for the β-D -manno-configurated cis-2,3-diol 12 were, however, rather poor (1,2-/1,3-linked products 48:52). The 1,2-linked disaccharides 66/67 derived from 12 were characterized as the acetates 70/71 . Koenigs-Knorr-type glycosidation of the cis-diols 11–13 by 2 or 3 proceeded with a similar regio- and a higher stereoselectivity (α-D > β-D with the donor 2 and α-D < β-D with the donor 3 ) than with 1 , with the exception of 12 which did not react with 2 . The regioselectivity of the glycosidations by 1 agrees fully with the H-bonding scheme of the diols and with the hypothesis that the intermediate carbene is preferentially protonated by the most weakly H-bonded OH group. The regioselectivity of the glycosidation by 2 and by 3 is determined by a higher reactivity of the equatorial OH groups and by H-bonding. Several H-bonded and equilibrating isomers of a given diol may intervene in the glycosidation by 1 , or by 2 and 3 , resulting in the same regioselectivity. The low nucleophilicity of 12 and the low degree of regioselectivity in its reaction with 3 show that stereoelectronic effects may also profoundly influence the nucleophilicity of OH groups.     

Synthesis of chiral 1-ferrocenylaldols and 1-ferrocenyl-1,3-diols via asymmetric reductions

The asymmetric transfer hydrogenation promoted by the (R,R)-(Ts-DPEN)–Ru complex of some 1-ferrocenyl-1,3-diketones was investigated and in all the cases only the carbonyl group distant to the metallocene moiety was reduced with variable selectivity depending on the C-3 substituent. The CBS-catalyzed reduction of 1-ferrocenyl-β-hydroxy-1-ketones, previously protected as acetates, was also found effective, giving both the corresponding syn- and anti-1,3-diols in satisfactory enantiomeric purity.     

Selective mono-acylation of 1,2- and 1,3-diols using (α,α-difluoroalkyl)amines

In the reaction of N,N-diethyl-α,α-difluorobenzylamine (DFBA) with 1,2- or 1,3-diols, selective mono-benzoylation occurs to afford mono-esters of the diols in good yield. The reaction is completed under mild conditions in a short reaction time. Further, prim-, sec-, and tert-diols and catechol can be converted to the corresponding mono-benzoates. DFBA is used for the protection of the hydroxy group in sugars. The selective mono-nicotinylation, formylation and pivaloylation of diols are also performed by using the corresponding difluoroalkylamines.     

Serendipitous synthesis of 3-hydroxy tetrahydrofurans from tin catalyzed sulfonylation of acyclic 1,2,4-triols

The reaction of syn-1,2,4-triols under sulfonylation conditions catalyzed by Bu₂SnO (5 mol %) results in cyclization and the formation of 3-hydroxy tetrahydrofurans (56-85%) while the anti-1,2,4-triols react to give C1-O-sulfonyl derivatives in good yields (66-83%) and the cyclization product in poor yield (5-12%). A mechanism that justifies these observations is proposed to occur via the tosylation of the primary hydroxyl followed by an intramolecular tin acetal rearrangement to a 1,3-stannylene which then undergoes a 5-exo-tet-cyclization. The difference in rates of cyclization reactivity is due to the energetically more stable tin acetals of syn-1,3-diols compared to those of anti-1,3-diols.     

A simple entry into 1,3-diols from (R)-2,3-cyclohexylideneglyceraldehyde: synthesis of (−)-galantinic acid

Aldehydes 5, 7, and 9 derived from easily accessible (R)-2,3-cyclohexylideneglyceraldehyde 1 were used as novel substrates to obtain both syn- and anti-1,3-diols in several individual reactions by subjecting each of them to some practically viable metal-mediated Barbier-type allylations under moist conditions. In this regard, a detailed investigation was made regarding the compatibility and stereoselectivity associated with four such metal-mediated allylations of these aldehydes 5–7. Good yields with moderate selectivity in several successful reactions with easy chromatographic separation of diastereoisomers of the products have been elegantly exploited to isolate two pairs of enantiomerically pure syn-1,3 and anti-1,3-diols (6a and 6b; 10a and 10b) in substantial amounts. Finally, 10b has been exploited to synthesize (?)-galantinic acid A.     

Mechanistic investigation of the Candida albicans CCT 0776 stereoinversion system and application to obtain enantiopure secondary alcohols

Phenylethanol deracemization with Candida albicans CCT 0776 whole cells yields the (R)-enantiomer in over 99% enantiomeric excess and 98% yield. The deracemization process involves, in the first step, a fast, highly (S)-selective oxidation (NADP and O₂ dependent) and, in the second step, a slower partially (S)-selective reduction (NADH dependent) of the intermediate ketone. The process was extended to other 2-alkanols, 1,2-diols and 1,3-diols and, with the exception of 1,3-diol (unreactive), the enantiomeric excess and yield of the deracemization were about 99% and 62–98%, respectively.     

New cup-shaped α-cyclodextrin derivatives and a study of their catalytic properties in oxidation reactions

A series of new α-cyclodextrin derivatives with a substituted propylene bridge attached to the 6-O's of the A,D-glucose units are reported. The compounds were prepared from the known 6^A,6^D-di-O-(prop-2-methylidene-1,3-dienyl)-hexadeca-O-benzyl-α-cyclodextrin, which was transformed into 6^A,6^D-di-O-(prop-2-methyl-1,3-dienyl)-α-cyclodextrin, 6^A,6^D-di-O-(prop-2-formyl-2-hydroxy-1,3-dienyl)-α-cyclodextrin, 6^A,6^D-di-O-(prop-2-aminomethyl-2-hydroxy-1,3-dienyl)-α-cyclodextrin, 6^A,6^D-di-O-(prop-2-hydroxymethylidene-1,3-dienyl)-α-cyclodextrin, 6^A,6^D-di-O-(prop-2-formyl-1,3-dienyl)-α-cyclodextrin, 6^A,6^D-di-O-(prop-2-carboxy-1,3-dienyl)-α-cyclodextrin and 6^A,6^D-di-O-(prop-2-methoxycarbonyl-1,3-dienyl)-α-cyclodextrin. The new compounds were evaluated for their ability to affect amine and alcohol oxidations in the presence of hydrogen peroxide.     

Hydroboration-oxidation of ricinoleic acid ester derivatives

The chiral center in ricinoleic acid methyl ester (ee ～100%) strongly affects the regioselectivity of its hydroboration-oxidation, so that the resulting 1,3-diol dominates by 74% over the 1,4-isomer. Furthermore, new asymmetric centers are formed preferentially with (S)-configuration, up to 87% for 1,3-diols and up to 100% for 1,4-diols.     

2,2′-Isopropylidenebis[(4S,5R)-4,5-di(2-naphthyl)-2-oxazoline] ligand for asymmetric cyclization-carbonylation of meso-2-alkyl-2-propargylcyclohexane-1,3-diols

The oxidative cyclization-carbonylation of meso-2-alkyl-2-propargylcyclohexane-1,3-diols mediated by Pd(II) with chiral bisoxazoline (box ligand) afforded bicyclic-β-alkoxyacrylates. Based on a ligand screening, 2,2′-isopropylidenebis[(4S,5R)-4,5-di(2-naphthyl)-2-oxazoline] ligand has been developed. The products with a chiral quaternary carbon were obtained in 71-100% yields with 85-95% ee.     

Synthesis of LeX and LeY Oligosaccharides with Azido-Type Spacer-Arms. Comparison of 3- and 4-Methoxybenzyl Groups as Key Temporary Protective Groups

Abstract

5-Azido-3-oxa-l-pentanol was prepared from 2-(2-chloroethoxy)ethanol and used as a spacer in the chemical synthesis of the trisaccharide β-D-Gal-(1→4)-[α-L-Fuc-(1→3)]-GlcNAc and the tetrasaccharide α-L-Fuc-α-(1→2)-β-D-Gal-(1→4)-[α-L-Fuc-(1→3)]-GlcNAc that represent the epitopes defining the human blood groups Le^x and Le^y. The classical 4-methoxybenzyl group and the remarably acid-stable 3-methoxybenzyl group were compared as temporary protective groups for position 3 at the glucosamine unit to circumvent the problems associated with the simultaneous presence of allyl and azido groups. The resulting oligosaccharides were coupled to proteins with high efficiency.

     

Concise synthesis of multiply substituted stereodefined cis,cis-2,4-diene-1,6-dials, cis,cis-2,4-diene-1,6-diols and further applications

Reactions of 1,4-dilithio-1,3-dienes with DMF afforded multiply substituted stereodefined cis,cis-2,4-diene-1,6-dials in high yields. Treatment of these 1,6-dials with LiAlH₄ or RLi resulted in the formation of their corresponding 1,6-diols. These bifunctional compounds, cis,cis-2,4-diene-1,6-dials and -1,6-diols are otherwise not readily available. Further reaction of these 1,6-diols with an aldehyde catalyzed by strong acids led to the formation of oxacycles of novel structures.     

Aluminum enolates via retroaldol reaction: catalytic tandem aldol-transfer—Tischtschenko reaction of aldehydes with aldol adducts of ketones to ketones

Bidentate aluminum chelates derived from biphenol, binaphthol and catechol were found to be efficient catalysts for aldol-transfer reactions of ketone to ketone aldol adducts with aliphatic or aromatic aldehydes giving rise to the formation of aldol adducts of ketones to the aldehydes. In the presence of an excess of an aliphatic aldehyde, a catalytic tandem aldol-transfer—Tischtschenko reaction is observed. The tandem reaction produces monoesters of 1,3-diols with high anti selectivity and with modest to good chemical yield. 1,2-Unsaturated aldehydes are less reactive in the aldol-transfer reaction and require 2-4 times higher load of the catalyst to be used than aliphatic and aromatic aldehydes. Poor diastereoselectivity was observed in the formation of α-substituted aldols and 2-substituted monoesters of anti-1,3-diols indicating that the aldol-transfer reaction is not diastereoselective with the catalysts studied. The utility of the highly 1,3-anti selective formation of diolmonoesters was found to be limited by acyl migration.     

Diastereoselective synthesis of enantioenriched homopropargyl amino alcohols from α-dibenzylamino aldehydes and their use as chiral synthons

Homochiral α-dibenzylamino aldehydes, prepared from the corresponding α-amino acids, react with propargyl bromide and zinc in DMF/THF (1:1) or DMF/Et₂O (1:1) at 20 °C to afford, in good yields and dr, homopropargylic 1,2-amino alcohols. anti Diastereomers were always formed as major products in this reaction. These compounds are versatile intermediates for a variety of synthetic targets: γ-amino-β-hydroxy-ketones, 4-amino-1,3-diols, 1,7-diamino-2,6-diols, and ω-amino-δ-hydroxy esters.     

Homo-and copolymerization of propylene and ethylene in the presence of titanium dichloride complexes with dioxolane dicarboxylate and bis(difurylmethanephenoxyimine) ligands

The polymerization of propylene and ethylene and the copolymerization of these olefins with postmetallocene catalysts [(4R,5R)-2,2-dimethyl-α,α,α′,α′-tetra(perfluorophenyl)-1,3-dioxolane-4,5-dimethanol] titanium(IV) dichloride and bis{N-(3,5-ditert-butylsalicylidene)-4-[bis(5-methyl-2-furyl)methyl]aniline}titanium( IV) dichloride have been studied. The polymerization of propylene and its copolymerization with ethylene have been carried out in a liquid monomer, while the polymerization of ethylene has been performed in toluene at the constant concentration of the monomer. Polymethylaluminoxane has been used as a cocatalyst. The activity of the catalysts in the polymerization of propylene and ethylene at 50°C is ～ 10 and ～45 kg PP/mol Ti h mol C₃H₆/l and 178.5 and 2700 kg PE/mol Ti h mol C₂H₄/l, respectively. It has been established that, in the copolymerization of propylene with ethylene, the active sites of both catalysts selectively polymerize ethylene. The resulting copolymers have a block structure (r ₁ r ₂= 4.6); as a result, the crystalline phase of polyethylene is formed in them. Polypropylene and propylene-ethylene copolymers are elastomeric materials. Polypropylene samples synthesized with [(4R,5R)-2,2-dimethyl-α,α,α′,α′-tetra(perfluorophenyl)-1,3-dioxolane-4,5-dimethanol]titanium(IV) dichloride demonstrate a high melting point (150–157°C) in combination with good elastic properties. Polyethylene is a linear polymer with the degree of crystallinity varying from 37 to 45% and a melting point of 133–134°C. The mechanical properties of the polymers and copolymers have been investigated.     

Isolation of highly pure erlotinib hydrochloride by recrystallization after nucleophilic substitution of an impurity with piperazine

Optimized synthesis and purification of erlotinib hydrochloride (N-(3-ethynylphenyl)-6,7-bis(2-methoxyethoxy)quinazoline-4-amine hydrochloride) were studied. Highly polar piperazine was used in a nucleophilic substitution reaction with the chlorinated intermediate byproduct N-(3-ethynylphenyl)-6(2-chloroethoxy)-7-(2-methoxyethoxy)quinazolin-4-amine hydrochloride. As a result, N-(3-ethynylphenyl)-6(2-chloroethoxy)-7-(2-methoxyethoxy)quinazolin-4-amine hydrochloride was completely transformed to N-(3-ethynylphenyl)-6(2-piperzinoethoxy)-7-(2-methoxyethoxy)quinazolin-4-amine hydrochloride. The polarity of N-(3-ethynylphenyl)-6(2-piperzinoethoxy)-7-(2-methoxyethoxy)quinazolin-4-amine hydrochloride was changed, and its molecule was enlarged. It was easy to remove this larger, more polar, compound by recrystallization. Highly pure erlotinib hydrochloride was obtained with low impurity content (<1 %). The purity of erlotinib hydrochloride was >99.9 %.     

Stereochemistry of the thermal isomerizations of (2S,3R-methoxymethyl-2,3-dideuterio-1-(dideuteriomethylene)cyclopropane

The (2S,3R) isomer of 2-methoxymethyl-2,3-dideuterio-1-(dideuteriomethylene)cyclopropane has been synthesized and heated at 198.8°: from the experimentally observed mol fractions of the eight isomers of 2,3,α,α,- and 2,3,3,α - tetradeuterio - 2 - methoxymethyl - 1 - methylenecyclopropane in the pyrolysis product mixture have been derived rate constants for seven distinct modes of isomerization. One-center thermal epimerizations at C(2) and C(3) and the C(2)C(3) two-center epimerization are of kinetic importance. Only two of four observable stereochemical modes for carbon [1,3] shifts are seen: there is inversion of stereochemistry at the migrating C atom, while the C(3)H trans to C(2)-CH₂OCH₃ in starting material becomes syn 4 : 1 C(α)-H in the [1,3] shift product. Stereomutation at C(2) does not occur along the reaction coordinate for [1,3] carbon shifts.     

Preparation of 1,3-diols by metalation-hydroboration of alkynes: A 1,2-hydrogen migration from boron to carbon

Metalation of a series of 1- and 2-alkynes with subsequent treatment with diborane and oxidation gave 1,3-diols exclusively. Deuteroboration of the lithiated acetylenes established the occurrence of a displacement of one of the B atoms by deuterium in gem-diboronated compounds. Hydroboration of several acetylenes and acetylides was also studied.     

2-(5-O-nitro-1,4:3,6-dianhydro-D-glucit-2-yloxy)-5-R-5-nitro-2-oxo-1,3,2-λ5-dioxaphosphorinanes: synthesis and structure

5,5-Disubstituted 1,3,2-dioxaphosphorinanes were synthesized by the reaction of (5-O-nitro-1,4:3,6-dianhydro-D-glucit-2-yl) phosphochloridate with 2-nitro-2-R-propane-1,3-diols in the presence of organic bases. The structure of 5-bromo-5-nitro-2-(5-O-nitro-1,4:3,6-dianhydro-d-glucit-2-yloxy)-2-oxo-1,3,2-λ⁵-dioxaphosphorinane was established by X-ray diffraction.