Bioelectrocatalytic Reduction of Oxygen in the Presence of Laccase Adsorbed on Carbon Electrodes

The kinetics of electroreduction of molecular oxygen on isotropic pyrocarbon with adsorbed laccase or a laccase–Nafion composite is studied. Kinetic parameters thus obtained are compared with those determined previously for electrodes of carbon black with adsorbed laccase. The closeness of kinetic parameters of the reaction of bioelectrocatalytic reduction of oxygen by laccase adsorbed on smooth (pyrocarbon) and disperse (carbon black) carbon materials led to a refined reaction mechanism. The slow stage of the reaction of bioelectrocatalytic reduction of oxygen is a synchronous transfer of two first electrons onto the oxygen molecule, similar to the mechanism of enzymatic catalysis by laccase.     

Direct electrochemistry of recombinant tobacco peroxidase on gold

Direct electron transfer (DET) reactions of recombinant tobacco peroxidase (rTOP), namely direct electroreduction of Compound I/Compound II and heme Fe^3+/2+ conversion, were studied on gold electrodes. rTOP of wild type, non-glycosylated, was produced using an Escherichia coli expression system. At pH 5.0, the redox potential for direct electrochemical transformation of the Fe^3+/2+ of the peroxidase heme was −143 mV vs. AgAgCl, and 0.26 ± 0.07 pmol of the adsorbed rTOP were in DET contact with the gold electrode. The total amount of the adsorbed rTOP estimated from QCM data was 53 ± 5 pmol/cm² or 1.67 pmol when referred to the surface area of the electrodes used for electrochemical measurements. Of 1.67 pmol of adsorbed rTOP, only 0.76 pmol were catalytically active. DET between Au and the enzyme was also studied in the reaction of the bioelectrocatalytic reduction of H₂O₂ by cyclic voltammetry and amperometric detection of H₂O₂ at +50 mV with rTOP-modified Au electrodes placed in a wall-jet flow-through electrochemical cell. Maximal bioelectrocatalytic current response of the rTOP-modified gold electrodes to H₂O₂ was observed at pH 5.0 and stemmed from its bioelectrocatalytic reduction based on DET between Au and the active site of rTOP. Kinetic analysis of the DET reactions gave 52% of the adsorbed rTOP molecules active in DET reactions (0.4 pmol of adsorbed catalytically active rTOP, correspondingly), which correlated well with the non-catalytic-voltammetry data. DET was characterised by a heterogeneous ET rate constant of 13.2 s⁻¹, if one takes into account the QCM data, and 19.6 s⁻¹, if the amount of rTOP estimated from the data on DET transformation of Fe^3+/2+ couple of rTOP is considered. The sensitivity for H₂O₂ obtained for the rTOP-modified Au electrodes was 0.7 ± 0.1 A M⁻¹ cm⁻². These are the first ever-reported data on DET reactions of anionic plant peroxidases on bare gold electrodes.     

纳米硫化镉修饰玻碳电极对血红蛋白的直接电化学和生物电催化

0IntroductionStudies of direct electrochemistry of proteins orenzymes at electrodes can serve as a basis for build-ing electrochemical biosensors,enzymatic bioreactors,and biomedical devices[1].This approach simplifiessuch devices without using mediators and is of partic-ular significance for fabricating the third generationbiosensors[2].For example,if a protein or enzyme im-mobilized on electrode surface is capable of directelectron transfer without loss of bioactivities,it can beused in the …     

A Membraneless Glucose/O2 Biofuel Cell Based on Pd Aerogels

In this study, we introduce the first membraneless glucose/O₂ biofuel cell using Pd‐based aerogels as electrode materials. The bioanode was fabricated with a coimmobilized mediator and glucose oxidase for the oxidation of glucose, in which ferrocenecarboxylic acid was integrated into a three‐dimensional porous beta‐cyclodextrin‐modified Pd aerogel to mediate the bioelectrocatalytic reaction. Bilirubin oxidase and Pd–Pt alloy aerogel were confined to an electrode surface, which realized the direct bioelectrocatalytic function for the reduction of O₂ to H₂O with a synergetic effect at the biocathode. By employing these two bioelectrodes, the assembled glucose/O₂ biofuel cell showed a maximum power output of 20 μW cm^?2 at 0.25 V.     

Mediated bioelectrocatalytic O2 reduction to water at highly positive electrode potentials near neutral pH

Combinations of bilirubin oxidase and metal complexes: [W(CN)₈]^3−/4−, [Os(CN)₆]^3−/4− and [Mo(CN)₈]^3−/4− (the formal potentials, E^0′(M), being 0.320, 0.448, and 0.584 V vs. Ag|AgCl, respectively, at pH 7.0), allowed bioelectrocatalytic reduction of O₂ to water at their formal potentials near neutral pH. The O₂ reduction current appeared even at the standard potential of the O₂/H₂O redox couple, E^0′(O₂/H₂O), when [Mo(CN)₈]^3−/4− was used at pH 7.4, though the magnitude was small. The magnitude of the bioelectrocatalytic current systematically decreased with the decrease in the potential difference between E^0′(O₂/H₂O) and E^0′(M). A limiting current as large as 17 mA/cm² of a projected electrode surface area was obtained at 0.25 V (−0.37 V vs. E^0′(O₂/H₂O)) for the O₂ reduction at pH 7.0 with a carbon felt electrode modified with electrostatically entrapped bilirubin oxidase and [W(CN)₈]^3−/4− at the electrode rotation rate of 4000 rpm.     

Studies of selectivity of oxygen reduction reaction in acidic electrolyte on electrodes modified by products of pyrolysis of polyacrylonitrile and metalloporphyrins

The rotating disk electrode technique was used to study in 0.5 M H₂SO₄ catalytic properties of products of pyrolysis of the metal-free polyacrylonitrile/carbon black composite, polyacrylonitrile/iron/carbon black composite, and also supported pyropolymers of Co(II) tetramethoxyphenyl porphyrine (CoTMPP) and Fe(III) tetramethoxyphenyl porphyrin chloride (FeTMPPCl). It is shown that the metal-free polyacrylonitrile/carbon black composite catalyzes the oxygen reduction reaction via the parallel path. Addition of up to 2% of Fe into the composite results in abrupt growth of the catalytic activity and share of the four-electron reaction, which provides the parallel–serial reaction path. The parallel reaction with no further catalytic conversion of H₂O₂ occurs on catalysts of the CoTMPP/Vulcan XC72 and FeTMPPCl/Vulcan XC72 series. The chemical composition is one of the key factors affecting activity and selectivity of CoTMPP/Vulcan XC72 catalysts. An increase in the precursor content from 5 to 30% is accompanied by an increase in selectivity k₁/k₂ from 0.14–0.30 to 0.5–1.7, where k₁ is the rate constant of the reaction of O₂ reduction to H₂O, k₂ is the rate constant of the reaction of O₂ reduction to H₂O₂.     

On the mechanism of H2O2 reduction at Prussian Blue modified electrodes

Prussian Blue deposited on the electrode surface under certain conditions is known to be a selective electrocatalyst of hydrogen peroxide (H₂O₂) reduction in the presence of O₂. The electrocatalyst was stabilized at cathodic potentials preventing its loss from the electrode surface. Hydrodynamic voltammograms of H₂O₂ reduction indicated the transfer of two electrons per catalytic cycle. The operational stability of Prussian Blue in H₂O₂ reduction was highly dependent on the buffer capacity of the supporting electrolyte. Since Prussian Blue is known to be dissolved in alkaline solution, it was confirmed that in neutral aqueous solutions the product of H₂O₂ electrocatalytic reduction is OH⁻.     

Picomolar Detection of Hydrogen Peroxide at Glassy Carbon Electrode Modified with NAD+ and Single Walled Carbon Nanotubes

Potential cycling was used for oxidation of NAD⁺ and producing an electroactive redox couple which strongly adsorbed on the electrode surface modified with single walled carbon nanotubes (SWCNTs). Modified electrode shows a pair of well defined and nearly reversible redox peaks at pH range 1–13 and the response showed a surface‐controlled electrode process. The surface coverage and heterogeneous electron transfer rate constant (k_s) of adsorbed redox couple onto CNTs films were about 6.32×10^?10 mol cm^?2 and 2.0 (±0.20) s^?1, respectively, indicating the high loading ability of CNTs toward the oxidation product of NAD⁺ (2,8‐dihydroxy adenine dinucleotide) and great facilitation of the electron transfer between redox couple and CNTs immobilized onto electrode surface. The modified electrode exhibited excellent electrocatalytic activity for H₂O₂ reduction at reduced overpotential. The catalytic rate constant for H₂O₂ reduction was found to be 2.22(±0.20)×10⁴ M^?1 s^?1. The catalytic reduction current allows the amperometric detection of H₂O₂ at an applied potential of ?0.25 V vs. Ag/AgCl with a detection limit of 10 pM and linear response up to 100 nM and resulting analytical sensitivity 747.6 nA/pM. The remarkably low detection limit (10 pM) is the lowest value ever reported for direct H₂O₂ determination on the electrodes at pH 7. The modified electrode can be used for monitoring H₂O₂ without the need for an enzyme or enzyme mimic. The proposed method for rapid amperometric detection of H₂O₂ is low cost and high throughput. Furthermore, the sensor can be used to any detection scheme that uses enzymatically generated H₂O₂ as a reactive product in biological systems.     

Electrocatalytic activity of hemoglobin in sodium alginate/SiO<Subscript>2</Subscript> nanoparticle/ionic liquid BMIMPF<Subscript>6</Subscript> composite film

A novel biocompatible composite film containing sodium alginate (SA), room temperature ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate (BMIMPF₆), SiO₂ nanoparticle, and hemoglobin (Hb) was fabricated and covered on the surface of a traditional carbon paste elecrode (CPE). The immobilized Hb on the electrode surface showed good direct electrochemical behaviors, and a pair of quasi-reversible redox peaks of Hb was obtained, which indicated that the direct electron transfer of Hb with the electrode surface had been achieved. The SA/nano-SiO₂/BMIMPF₆/Hb/CPE showed dramatically electrocatalytic activity to the reduction of trichloroacetic acid, hydrogen peroxide (H₂O₂), and oxygen (O₂). The kinetic parameters for the electrocatalytic reactions were evaluated. The composite film showed the potential to the biosensor and biocatalysis.     

Direct Electrochemistry and Electrocatalysis of the Hemoglobin Immobilized on Diazonium‐Functionalized Aligned Carbon Nanotubes Electrode

A simple and efficient electrochemical method is utilized to functionalize aligned carbon nanotubes (ACNTs) by the electrochemical reduction of 4‐carboxyphenyl diazonium salt. Thus hemoglobin (Hb) molecules were covalently immobilized on the diazonium‐ACNTs surface via carbodiimide chemistry. Direct electrochemistry and bioelectrocatalytic activity of the immobilized Hb were then investigated by cyclic voltammetry (CV) and amperometry techniques. It is showed that the Hb film on the diazonium‐ACNTs electrode had well‐defined redox peaks with a formal potential (E°) at ?312 mV (vs. Ag/AgCl), and the Hb‐ACNTs electrode displayed good electrocatalytic activity to H₂O₂ reduction. Owing to the high Hb covering on the ACNTs surface (Γ*=2.7×10^?9 mol cm^?2), the catalytic current were significantly improved when compared to the current measured at an Hb‐tangled carbon nanotubes electrode. The Hb‐ACNTs electrode exhibited high sensitivity, long‐term stability and wide concentration range from 40 μM to 3 mM for the amperometric detection of H₂O₂. The heterogeneous reaction rate constant (k_s) was 0.95±0.05 s^?1 and the apparent Michaelis–Menten constant (K was 0.15 mM.     

Direct electrochemistry and electrocatalysis of horseradish peroxidase immobilized in hybrid organic-inorganic film of chitosan/sol-gel/carbon nanotubes

A hybrid organic-inorganic nanocomposite film of chitosan/sol-gel/multi-walled carbon nanotubes was constructed for the immobilization of horseradish peroxidase (HRP). This film was characterized by scanning electron microscopy. Direct electron transfer (DET) and bioelectrocatalysis of HRP incorporated into the composite film were investigated. The results indicate that the film can provide a favorable microenvironment for HRP to perform DET on the surface of glassy carbon electrodes with a pair of quasi-reversible redox waves and to retain its bioelectrocatalytic activity toward H₂O₂.     

Catalysis of dioxygen reduction at soluble polyaniline modified electrode

A reflux-treatment of soluble polyaniline (SPA) in dimethylformamide (DMF) containing CoCl₂ yields an active catalyst for dioxygen reduction which can be adsorbed on the electrode surface firmly. The catalytic reduction of dioxygen at the glassy carbon (GC) electrode modified by the catalyst was studied with cyclic voltammetry (CV), rotating disk electrode (RDE) and rotating ring-disk electrode (RRDE). The kinetic process of dioxygen reduction at the modified electrode was analyzed with a new RRDE theory dealing with a nondiffusion-controlled process on ring electrode. The rate constants for each scheme of dioxygen reduction were calculated, showing that only 2-electron reduction to H₂O₂ was conducted at the modified electrode. The effect of solution acidity on the electrocatalytic behaviour for dioxygen reduction was investigated. A possibility of initiating catalytic activity for dioxygen reduction was explored with ESCA method.     

Palladium Nanoparticles Embedded into Graphene Nanosheets: Preparation,Characterization, and Nonenzymatic Electrochemical Detection of H2O2

A novel nonenzymatic H₂O₂ sensor based on a palladium nanoparticles/graphene (Pd‐NPs/GN) hybrid nanostructures composite film modified glassy carbon electrode (GCE) was reported. The composites of graphene (GN) decorated with Pd nanoparticles have been prepared by simultaneously reducing graphite oxide (GO) and K₂PdCl₄ in one pot. The Pd‐NPs were intended to enlarge the interplanar spacing of graphene nanosheets and were well dispersed on the surface or completely embedded into few‐layer GN, which maintain their high surface area and prevent GN from aggregating. XPS analysis indicated that the surface Pd atoms are negatively charged, favoring the reduction process of H₂O₂. Moreover, the Pd‐NPs/GN/GCE could remarkably decrease the overpotential and enhance the electron‐transfer rate due to the good contact between Pd‐NPs and GN sheets, and Pd‐NPs have high catalytical effect for H₂O₂ reduction. Amperometric measurements allow observation of the electrochemical reduction of H₂O₂ at 0.5 V (vs. Ag/AgCl). The H₂O₂ reduction current is linear to its concentration in the range from 1×10^?9 to 2×10^?3 M, and the detection limit was found to be 2×10^?10 M (S/N=3). The as‐prepared nonenzymatic H₂O₂ sensor exhibits excellent repeatability, selectivity and long‐term stability.     

A novel H(2)O(2) amperometric biosensor based on gold nanoparticles/self-doped polyaniline nanofibers

A new kind of gold nanoparticles/self-doped polyaniline nanofibers (Au/SPAN) with grooves has been prepared for the immobilization of horseradish peroxidase (HRP) on the surface of glassy carbon electrode (GCE). The ratio of gold in the composite nanofibers was up to 64%, which could promote the conductivity and biocompatibility of SPAN and increase the immobilized amount of HRP molecules greatly. The electrode exhibits enhanced electrocatalytic activity in the reduction of H₂O₂ in the presence of the mediator hydroquinone (HQ). The effects of concentration of HQ, solution pH and the working potential on the current response of the modified electrode toward H₂O₂ were optimized to obtain the maximal sensitivity. The proposed biosensor exhibited a good linear response in the range from 10 to 2000 μM with a detection limit of 1.6 μM (S/N = 3) under the optimum conditions. The response showed Michaelis–Menten behavior at larger H₂O₂ concentrations, and the apparent Michaelis–Menten constant K_m was estimated to be 2.21 mM. The detection of H₂O₂ concentration in real sample showed acceptable accuracy with the traditional potassium permanganate titration.     

The electrochemical activities of anthraquinone monosulfonate adsorbed on the basal plane of reduced graphene oxide by π–π stacking interaction

The electrochemical properties of anthraquinone monosulfonate (AQS) adsorbed on the basal plane of chemically-reduced graphene oxide (RGO) by π–π stacking interaction were investigated. The AQS/RGO nanocomposites were synthesized via a simple reduction–adsorption method and characterized with various techniques, and the surface concentration of AQS on the basal plane of RGO was estimated to be 1.72?×?10^?12 mol cm^?2. Electrochemical tests showed that the AQS/RGO nanocomposites accelerated the heterogeneous electron transfer, when ferro/ferricyanide was used as a redox probe, and RGO facilitated the electron transfer between AQS and the surface of glassy carbon electrode, producing a well-defined redox couple centered at ?0.490 V versus SCE at neutral medium. Compared with AQS and RGO modified glassy carbon (GC) electrode, the AQS/RGO nanocomposites showed better electrocatalytic activity towards oxygen reduction reaction. Rotating disk electrode data showed that the reduction of O₂ on AQS/RGO/GC electrode underwent a two-electron process to H₂O₂ at low overpotential and shifted to four-electron reduction to H₂O at relatively high overpotential. The present work demonstrates that AQS can be an efficient catalyst when noncovalently functionalized on the basal plane of RGO for electrochemical applications.     

A Novel Composite Electrode of Photocatalyst—TiO2／C Loading on the Surface of the Air （Oxygen） Electrode

The methods for preparing the H2O2 generating air (oxygen) electrode and the composite electrode of photocatalyst-TiO2/C loading on the surface of the air (oxygen) electrode were introduced.In the case of the composite electrode,the current efficiency of electro-generated H2O2 is higher than 80%(J≤15mA/cm^2).The degradation of aniline was used as an example to measure the influence of the composite electrode and compared with the system in which the air (oxygen) electrode and the photocatalyst-TiO2 were sqparated.The results confirmed that the composite electrode played an active role on accelerating the degradation rate of aniline.According to the measurement of the polarization curves of composite electrode and TiO2 photo anode,and of the adsorbing amount of aniline on the surface of the composite electrode,the principle of descending the recombination reta of photo-generated electron and hole and of enhancing the oxidation rate of organic molecule was described.The mechanism about the degradation of aniline was also discussed.     

Platinized-heteropolycompound-based nanostructured catalysts for low-temperature hydrogen-air fuel cells

Heteropoly acids Cs _x H_{3 − x} PW₁₂O₄₀ · nH₂O with different cesium content are synthesized as nanostructured compositions. Their actual composition and specific surface are determined, microstructure studied and proton conductivity measured. Composite electrocatalytic systems based on platinized cesium salt of phosphorus-tungsten heteropolyacid Cs_2.3H_0.7PW₁₂O₄₀ · nH₂O are prepared with admixture of Vulcan XC-72 carbon black. Mixed electronic-ionic conduction of the composite systems with different carbon black content is studied. Platinum-based nanostructured electrocatalyst based on the Cs_2.3H_0.7PW₁₂O₄₀ · nH₂O-materials as support is synthesized and studied. The possible effective using of the studied nanocomposite as electrode for low-temperature hydrogen-air fuel cells is demonstrated. Electrochemical studies of catalytic properties of the Pt-Cs_2.3H_0.7PW₁₂O₄₀ · nH₂O-C-electrodes in hydrogen and air are carried out by example of the prepared materials with different carbon black content.     

Cobaltporphyrin‐adsorbed carbon black: highly efficient electrocatalysts for oxygen reduction

meso‐Substituted cobalt porphyrins adsorbed on carbon black were prepared as catalysts for the electroreduction of O₂. The catalyst, which was prepared by using a homogenizer in mixing cobalt tetraethylporphyrin and carbon black, gave rise to electroreduction of O₂ at a remarkably positive potential (E_p = 0.45 V versus saturated calomel electrode (SCE)) and showed a high selectively for the four‐electron reduction (n = 3.8). Electrochemical study and extended X‐ray absorption fine structure (EXAFS) analysis revealed that the adsorbed face‐to‐face dimeric aggregates of cobalt porphyrin molecules were highly efficient catalysts for electroreduction of O₂. Copyright © 2005 John Wiley & Sons, Ltd.     

Formation of peracids from corresponding organic acids under oxygen electroreduction in gas-diffusion electrode

The effect of conditions of electrolysis in aqueous solutions of (K₂SO₄ + H₂SO₄) electrolytes was studied in the presence of formic, acetic, and butyric acids on the formation of the corresponding peracids under oxygen electroreduction in carbon black gas-diffusion electrodes. In the presence of organic acids with the concentration of 1.5–4.7 M, as dependent in the electrolysis conditions, the current efficiency of H₂O₂ formation decreases from 70 to 13 % and its concentration drops from 2.3 to 0.4 M. Electrolysis under constant current (50–100 mA/cm²) results in formation of peracids with the concentration of up to 7.5 mM. No direct dependence of the concentration of peracids on the concentration of the obtained H₂O₂ is observed. The presence of tetrabutylammonium bromide in the solution inhibits significantly peracid formation. It is assumed that synthesis of peracids occurs partly on the surface of carbon black through activation of the adsorbed acid by a hydrogen cation and further interaction with the active form of oxygen obtained under oxygen reduction or decomposition of H₂O₂.     

Direct Electron Transfer and Electrocatalysis of Hemoglobin on Chitosan‐TiO2 Nanorods‐Glass Carbon Electrode

The direct electron transfer between hemoglobin (Hb) and the glassy carbon electrode (GC) can be readily achieved via a high biocompatible composite system based on biopolymer chitosan (CHT) and TiO₂ nanorods (TiO₂‐NRs). TiO₂‐NRs greatly promote the electron transfer between Hb and GC, which contribute to the higher redox peaks. UV‐vis spectra result indicated the Hb entrapped in the composite film well keep its native structure. The immobilized Hb remains its bioelectrocatalytical activity to the reduction of H₂O₂ with a lower detection limit. A novel, sensitive, reproducible and stable electrochemical biosensing platform of H₂O₂ based on Hb‐TiO₂‐CHT electrode is explored.