Rupture force of single supramolecular bonds in associative polymers by AFM at fixed loading rates

Atomic-force-microscopy-based single-molecule force spectroscopy (AFM-SMFS) was used to study the bond strength of self-complementary hydrogen-bonded complexes based on the 2-ureido-4[1H]-pyrimidinone (UPy) quadruple H-bond motif in hexadecane (HD). The unbinding force corresponding to single UPy-UPy dimers was investigated at a fixed piezo retraction rate in the nonequilibrium loading rate regime. The rupture force of bridging supramolecular polymer chains formed between UPy-functionalized substrates and AFM tips in the presence of a bis-UPy derivative was found to decrease with increasing rupture length. The rupture length was identified as the chain length of single, associating polymers, which allowed us to determine the number of supramolecular bonds (N) at rupture. The rupture force observed as a function of N was in quantitative agreement with the theory on uncooperative bond rupture for supramolecular linkages switched in a series. Hence, the value of the dimer equilibrium constant Keq=(1.3+/-0.5) x 10(9) M(-1), which is in good agreement with previously estimated values, was obtained by SMFS of supramolecular polymers at a single loading rate.     

Single-molecule-force spectroscopy study of the mechanism of interactions between TSP-1 and CD47

The 4N1K peptide,which is derived from the C-terminal domain of thrombospondin-1(TSP-1),is usually used as a functional mimic peptide for TSP-1.Knowledge about the interaction force of 4N1K/CD47 is important in explaining how TSP-1 affects the biological effect of CD47.Here we used a single-molecule force spectroscopy(SMFS)technique to explore the interaction of 4N1K/CD47 on both normal and oxidative human red blood cells(h RBCs)at single-molecule level.There was no interaction force between 4N1K and CD47 on normal h RBCs;however,we did find 4N1K-bound CD47 on oxidative h RBCs.We also detected interaction forces for 4N1K/CD47ex(extracellular domain of human CD47),and 4N1K/oxidative CD47ex.The interaction forces of 4N1K/CD47ex were almost consistent with those of 4N1K/oxidative CD47ex at the same loading rate.These results suggest that the conformational change of CD47 is critical for 4N1K-CD47 interaction on oxidative h RBCs.     

Intercalation interactions between dsDNA and acridine studied by single molecule force spectroscopy

In this letter, we report on the direct measurement of the intercalation interactions between acridine and double-stranded DNA (dsDNA) using single molecule force spectroscopy. The interaction between acridine and dsDNA is broken by force of 36 pN at a loading rate of 5.0 nN/s. The most probable rupture force between acridine and dsDNA is dependent on the loading rate, indicating that the binding of acridine and dsDNA is a dynamic process. The combination of SMFS experimental data with the theoretical model clearly suggests the presence of two energy barriers along with an unbinding trajectory of acridine-dsDNA.     

Dynamic strength of the silicon-carbon bond observed over three decades of force-loading rates

The mechanical strength of individual Si-C bonds was determined as a function of the applied force-loading rate by dynamic single-molecule force spectroscopy, using an atomic force microscope. The applied force-loading rates ranged from 0.5 to 267 nN/s, spanning 3 orders of magnitude. As predicted by Arrhenius kinetics models, a logarithmic increase of the bond rupture force with increasing force-loading rate was observed, with average rupture forces ranging from 1.1 nN for 0.5 nN/s to 1.8 nN for 267 nN/s. Three different theoretical models, all based on Arrhenius kinetics and analytic forms of the binding potential, were used to analyze the experimental data and to extract the parameters fmax and D(e) of the binding potential, together with the Arrhenius A-factor. All three models well reproduced the experimental data, including statistical scattering; nevertheless, the three free parameters allow so much flexibility that they cannot be extracted unambiguously from the experimental data. Successful fits with a Morse potential were achieved with fmax = 2.0-4.8 nN and D(e) = 76-87 kJ/mol, with the Arrhenius A-factor covering 2.45 x 10(-10)-3 x 10(-5) s(-1), respectively. The Morse potential parameters and A-factor taken from gas-phase density functional calculations, on the other hand, did not reproduce the experimental forces and force-loading rate dependence.     

Residence time, loading force, pH, and ionic strength affect adhesion forces between colloids and biopolymer-coated surfaces

Exopolymers are thought to influence bacterial adhesion to surfaces, but the time-dependent nature of molecular-scale interactions of biopolymers with a surface are poorly understood. In this study, the adhesion forces between two proteins and a polysaccharide [Bovine serum albumin (BSA), lysozyme, or dextran] and colloids (uncoated or BSA-coated carboxylated latex microspheres) were analyzed using colloid probe atomic force microscopy (AFM). Increasing the residence time of an uncoated or BSA-coated microsphere on a surface consistently increased the adhesion force measured during retraction of the colloid from the surface, demonstrating the important contribution of polymer rearrangement to increased adhesion force. Increasing the force applied on the colloid (loading force) also increased the adhesion force. For example, at a lower loading force of approximately 0.6 nN there was little adhesion (less than -0.47 nN) measured between a microsphere and the BSA surface for an exposure time up to 10 s. Increasing the loading force to 5.4 nN increased the adhesion force to -4.1 nN for an uncoated microsphere to a BSA surface and to as much as -7.5 nN for a BSA-coated microsphere to a BSA-coated glass surface for a residence time of 10 s. Adhesion forces between colloids and biopolymer surfaces decreased inversely with pH over a pH range of 4.5-10.6, suggesting that hydrogen bonding and a reduction of electrostatic repulsion were dominant mechanisms of adhesion in lower pH solutions. Larger adhesion forces were observed at low (1 mM) versus high ionic strength (100 mM), consistent with previous AFM findings. These results show the importance of polymers for colloid adhesion to surfaces by demonstrating that adhesion forces increase with applied force and detention time, and that changes in the adhesion forces reflect changes in solution chemistry.     

Supramolecular research by single molecule force spectroscopy

Single molecule force spectroscopy (SMFS) is a new kind of technique based on atomic force microscope, which allows detecting force as low as pico-newtons directly. Herein based on our recent work, we want to demonstrate the investigation of supramolecular structures and interactions in polymer systems by SMFS, such as desorption force between polymer and substrate, identifiability of polymer micelle and its interaction with surfactant, splitting force of ion-induced helical structure in polysaccharide. It shows well that SMFS is a powerful tool in the study of supramolecular science.     

Collective and single-molecule interactions of alpha5beta1 integrins

A novel biomimetic system was used to study collective and single-molecule interactions of the alpha5beta1 receptor-GRGDSP ligand system with an atomic force microscope (AFM). Bioartificial membranes, which display peptides that mimic the cell adhesion domain of the extracellular matrix protein fibronectin, are constructed from peptide-amphiphiles. The interaction measured with the immobilized alpha5beta1 integrins and GRGDSP peptide-amphiphiles is specifically related to the integrin-peptide binding. It is affected by divalent cations in a way that accurately mimics the adhesion function of the alpha5beta1 receptor. The recognition of the immobilized receptor was significantly increased for a surface that presented both the primary recognition site (GRGDSP) and the synergy site (PHSRN) compared to the adhesion measured with surfaces that displayed only the GRGDSP peptide. At the collective level, the separation process of the receptor-ligand pairs is a combination of multiple unbinding and stretching events that can accurately be described by the wormlike chain (WLC) model of polymer elasticity. In contrast, stretching was not observed at the single-molecule level. The dissociation of single alpha5beta1-GRGDSP pairs under loading rates of 1-305 nN/s revealed the presence of two activation energy barriers in the unbinding process. The high-strength regime above 59 nN/s maps the inner barrier at a distance of 0.09 nm along the direction of the force. Below 59 nN/s a low-strength regime appears with an outer barrier at 2.77 nm and a much slower transition rate that defines the dissociation rate (off-rate) in the absence of force (k(off) degrees = 0.015 s(-1)).     

Self‐Stabilized and Strongly Adhesive Supramolecular Polymer Protective Layer Enables Ultrahigh‐Rate and Large‐Capacity Lithium‐Metal Anode

Constructing a solid electrolyte interface (SEI) is a highly effective approach to overcome the poor reversibility of lithium (Li) metal anodes. Herein, an adhesive and self‐healable supramolecular copolymer, comprising of pendant poly(ethylene oxide) (PEO) segments and ureido‐pyrimidinone (UPy) quadruple‐hydrogen‐bonding moieties, is developed as a protection layer of Li anode by a simple drop‐coating. The protection performance of in‐situ‐formed LiPEO–UPy SEI layer is significantly enhanced owing to the strong binding and improved stability arising from a spontaneous reaction between UPy groups and Li metal. An ultrathin (approximately 70 nm) LiPEO–UPy layer can contribute to stable and dendrite‐free cycling at a high areal capacity of 10 mAh cm^?2 at 5 mA cm^?2 for 1000 h. This coating together with the promising electrochemical performance offers a new strategy for the development of dendrite‐free metal anodes.     

Molecular motions of different scales at thin polystyrene film surface by lateral force microscopy

Lateral force microscopy (LFM) was used to probe the molecular motions at thin polystyrene film surface. The effect of the applied load on the LFM measurements was investigated by presenting both the LFM results and the surface morphology after several scans over the same area. Depending on the loads, the scanning can be nonperturbative (without alternating the surface morphology) or perturbative (patterning the surface). Temperature-dependent LFM measurements were conducted in order to determine the apparent transitions at the surface. Perturbative scans under high loads (e.g., 150 nN) witnessed that the apparent transitions shifted to low temperatures with an increasing scan rate, while the transitions behaved oppositely under lower loads (1, 10, and 20 nN). The heating effect is suggested to account for the behavior under high loads. According to our results from nonperturbative LFM, the apparent glass transition temperature (T(g)s) is more than 10 K lower than the bulk value. Moreover, rate-dependent LFM measurements were performed under 1 nN in order to detect the surface molecular motions. Time-temperature superposition yields a master curve exhibiting three apparent relaxation peaks. The molecular motions at the surface are discussed on the context of the coupling model.     

Extracting a single polyethylene oxide chain from a single crystal by a combination of atomic force microscopy imaging and single-molecule force spectroscopy: toward the investigation of molecular interactions in their condensed states

A thiol-labeled single polyethylene oxide chain has been pulled out of its single crystal and the corresponding extraction force obtained quantitatively by a good combination of atomic force microscopy (AFM) imaging and AFM-based single-molecule force spectroscopy (SMFS). Our study extends the AFM-based SMFS to the investigation of polymer interactions in their condensed states (e.g., in polymer single crystals).     

Single-molecule force spectroscopy of bimolecular reactions: system homology in the mechanical activation of ligand substitution reactions

The mechanochemistry of the bimolecular nucleophilic substitution of DMSO for substituted pyridines at a square-planar pincer Pd(II) center was investigated using single-molecule force spectroscopy (SMFS). The SMFS data are interpreted in terms of the Bell-Evans model, which gives thermal off-rates for two reactions that agree well with previous, stress-free measurements. The characteristic force dependency of the rupture rate, fbeta, is effectively constant for the two reactions examined (22 +/- 2 and 24 +/- 2 pN), and the system homology in the mechanical response is consistent with expected similarities in the reaction potential energy surfaces.     

Mechanical unfolding of ensemble biomolecular structures by shear force

Mechanical unfolding of biomolecular structures has been exclusively performed at the single-molecule level by single-molecule force spectroscopy (SMFS) techniques. Here we transformed sophisticated mechanical investigations on individual molecules into a simple platform suitable for molecular ensembles. By using shear flow inside a homogenizer tip, DNA secondary structures such as i-motifs are unfolded by shear force up to 50 pN at a 77 796 s⁻¹ shear rate. We found that the larger the molecules, the higher the exerted shear forces. This shear force approach revealed affinity between ligands and i-motif structures. It also demonstrated a mechano-click reaction in which a Cu(i) catalyzed azide–alkyne cycloaddition was modulated by shear force. We anticipate that this ensemble force spectroscopy method can investigate intra- and inter-molecular interactions with the throughput, accuracy, and robustness unparalleled to those of SMFS methods.

Shear force in a homogenizer mechanically unfolds an ensemble set of biomolecular structures.     

Perfluorophenyl azide immobilization chemistry for single molecule force spectroscopy of the concanavalin A/mannose interaction

The versatility of perfluorophenyl azide (PFPA) derivatives makes them useful for attaching a wide variety of biomolecules and polymers to surfaces. Herein, a single molecule force spectroscopy (SMFS) study of the concanavalin A/mannose interaction was carried out using PFPA immobilization chemistry. SMFS of the concanavalin A/mannose interaction yielded an average unbinding force of 70-80 pN for loading rates between 8000 and 40,000 pN/s for mannose surfaces on aminated glass, and an unbinding force of 57 ± 20 pN at 6960 pN/s for mannose surfaces on gold-coated glass. Dynamic force spectroscopy was used to determine the dissociation rate constant, k(off), for this interaction to be 0.16 s(-1).     

以时温等效方法研究尼龙1010应力松弛行为及使用寿命预测

以尼龙材料的应力松弛行为作为研究对象, 考察初始应变为1.0%, 2.8%和5.1%的尼龙1010样品在温度区间293353 K的松弛曲线, 采用时间-温度等效叠加方法得到了松弛模量主曲线, 计算出叠加过程中的表观活化能、 松弛过程中的活化体积和应力辅助功. 结果表明, 整个松弛过程中的表观活化能和应力辅助功表现出相同的变化趋势, 体现出松弛过程中克服运动单元位垒的过程. 当293323 K区间的松弛曲线叠加时, 随着初始应变的增加, 表观活化能和应力辅助功均逐渐降低, 有助于聚合物内部的运动单元越过能垒发生松弛, 与松弛过程中的应力辅助热活化理论相一致; 当333353 K区间的松弛曲线叠加时, 不同初始应变样品的表观活化能均为260 kJ/mol, 应力辅助功均为60 MPa·nm³, 说明松弛过程中克服运动单元的能垒与应力作用无关. 根据松弛主曲线, 计算出了尼龙1010在1.0%, 2.8%和5.1% 3种形变下, 长时间范围内应力衰减与时间的关系, 为预测实际使用过程中的应力松弛行为提供了依据.     

Synthesis and energy-transfer properties of hydrogen-bonded oligofluorenes

A set of fluorene oligomers has been synthesized by stepwise palladium-catalyzed (Suzuki) couplings of fluorene monomers. Ureidopyrimidinones (UPy), functional groups that can dimerize via quadruple hydrogen bonds, were attached to both ends of the oligofluorenes. The resulting bis-UPy-terminated oligomers self-assemble into supramolecular chain polymers. For comparison, oligofluorenes of the same oligomer lengths but without terminal hydrogen-bonding groups were synthesized. Chains of hydrogen-bonded fluorenes can be simply endcapped by a variety of chain stoppers, molecules that have one UPy group. In this manner, we have endcapped the hydrogen-bonded fluorene chains with either oligo(p-phenylenevinylene) or perylene bisimide. Energy-transfer experiments in solution and the solid state demonstrate that oligofluorenes can donate energy to a variety of energy acceptors, but that this energy transfer occurs most effectively when the donor fluorene is hydrogen-bonded to the acceptor.     

Interaction between dendrons directly studied by single-molecule force spectroscopy

In this article, we have investigated the interaction between two poly(benzyl ether) dendrons directly by single-molecule force spectroscopy. For this purpose, one dendron was immobilized on an AFM tip through a poly(ethylene glycol) (PEG) spacer, and the other dendron was anchored on a gold substrate as a self-assembled monolayer. Two dendrons approached and then interacted with each other when the AFM tip and the substrate moved close together. The rupture force between dendrons was measured while the AFM tip and the substrate separated. PEG as a flexible spacer can function as a length window for recognizing the force signals and avoiding the disturbance of the interaction between the AFM tip and the substrate. The interaction between two first-generation dendrons is measured to be about 224 pN at a force loading rate of 40 nN/s. The interaction between second- and first-generation dendrons rises to 315 pN at the same loading rate. Such interactions depend on the force loading rate in the range of several to hundreds of nanonewtons per second, indicating that the rupture between dendrons is a dynamic process. The study of the interaction between surface-bound dendrons of different generations provides a model system for understanding the surface adhesion of molecules with multiple branches. In addition, this multiple-branch molecule may be used to mimic the sticky feet of geckos as a man-made adhesive.     

Peel adhesion and viscoelasticity of rubber–resin blends

Mixtures in various proportions of natural rubber (NR) and each of two tackifier resins, a poly-β-pinene and a modified pentaerythritol rosin ester, were used as the adhesive layer in joining a flexible polyester strip to a plane glass substrate. Measurements of the force required to peel the strip from the glass at a 90° angle were made over a range of pulling rates at several temperatures. Application of time-temperature superposition enabled a master curve of (reduced) peel force versus (log) pulling rate at a standard temperature (296 K) to be obtained for each adhesive composition. The master curves showed, in increasing order of pulling rate, some or all of four different modes of peeling: (i) peeling with viscous adhesive response, (ii) peeling with rubbery response, (iii) oscillatory or slip-stick peeling, and (iv) peeling with glassy adhesive response. In general, transitions between the different peeling modes were quite abrupt. Increase in concentration of tackifier resin caused displacement of the master curve toward lower pulling rates [an effect interpreted in terms of an increasing adhesive glass temperature (T_g)], and a superimposed displacement of the transition between peeling modes (i) and (ii) toward higher pulling rates-an effect attributed to reduction in adhesive average molecular weight. The influence of the tackifier resin in modifying the viscoelastic characteristics of the adhesive was further demonstrated in a comparison of the peel force master curves with corresponding master curves of dynamic storage modulus.     

聚合物单分子力谱的研究进展

在单分子水平研究聚合物体系的分子内及分子间相互作用, 对于揭示其结构-性能的关系, 进而实现对相应功能的调控极为重要. 基于原子力显微镜技术(AFM)的单分子力谱, 由于其操作简单且适用面广, 在单分子研究领域得到了广泛的应用. 本文概括了该技术在生物高分子及合成高分子体系的研究进展. 对于生物高分子体系, 主要介绍了核酸(DNA/RNA)、 蛋白质和多糖(淀粉)的单分子力谱研究及利用各自力学指纹谱对其它分子间的相互作用的研究. 对于合成高分子体系, 主要介绍了聚合物的一级结构与单链弹性的关系及溶剂和聚集态结构等对高分子单链力学性质的影响规律.     

Multivalent Interactions of Polyamide Based Sequence‐Controlled Glycomacromolecules with Concanavalin A

Binding of mannose presenting macromolecules to the protein receptor concanavalin A (ConA) is investigated by means of single‐molecule atomic force spectroscopy (SMFS) in combination with dynamic light scattering and molecular modeling. Oligomeric (M_w ≈ 1.5–2.5 kDa) and polymeric (M_w ≈ 22–30 kDa) glycomacromolecules with controlled number and positioning of mannose units along the scaffolds accessible by combining solid phase synthesis and thiol–ene coupling are used as model systems to assess the molecular mechanisms that contribute to multivalent ConA–mannose complexes. SMFS measurements show increasing dissociation force from monovalent (≈57 pN) to pentavalent oligomers (≈75 pN) suggesting subsite binding to ConA. Polymeric glycomacromolecules with larger hydrodynamic diameters compared to the binding site spacing of ConA exhibit larger dissociation forces (≈80 pN), indicating simultaneous dissociation from multiple ConA binding sites. Nevertheless, although simultaneous dissociation of multiple ligands could be expected for such multivalent systems, predominantly single dissociation events are observed. This is rationalized by strong coiling of the macromolecules' polyamide backbone due to intramolecular hydrogen bonding hindering unfolding of the coil. Therefore, this study shows that the design of glycopolymers for multivalent receptor binding and clustering must consider 3D structure and intramolecular interactions of the scaffold.     

Coils,Rods and Rings in Hydrogen‐Bonded Supramolecular Polymers

The article discusses the development and properties of supramolecular polymers based on quadruple hydrogen bonds between self‐complementary ureidotriazine (UTr) and ureidopyrimidinone (UPy) functional groups. The high association constant with which these groups dimerize leads to polymers with a high degree of polymerization in isotropic solution. Application of these units for the functionalization of telechelic polymers results in new materials with mechanical properties approaching those of covalent polymers, but with a much stronger temperature‐dependent behavior. Solvophobic interactions between the hydrogen bonding moieties may be used to obtain supramolecular polymers with a well defined helical columnar architecture. Another consequence of the high dimerization constant of the UPy group is the phenomenon of a critical concentration in solutions of many bifunctional monomers. Below this concentration, only cycles are present, while above the critical concentration, the amount of cycles remains constant, and a polymer is formed. Conformational properties of the linker units are used to control the equilibrium between polymers and cycles, and are proposed to form a promising strategy toward tunable materials.

Supramolecular polymer material with elastomeric properties resulting from functionalization with UPy groups. (Reproduced with permission. © John Wiley & Sons, Inc.)