Transport selectivity of carbonate and chloride ions througha strongly alkaline anion-exchange membrane before and after its modification with sodium alginate

The transport selectivity of carbonate ions relative to chloride ions \(\left( {P_{Cl^ - }^{CO_3^{2 - } } } \right)\) through an anion-exchange membrane during electrodialysis is investigated before and after the membrane was modified by the electrolytic precipitation of sodium alginate on its surface, as well as by pretreating the membrane in a solution of sodium alginate. It is established that the experimental value of \(P_{Cl^ - }^{CO_3^{2 - } } \) is appreciably smaller than the calculated value for the unmodified membrane at low values of current density. At large currents the calculated value of \(P_{Cl^ - }^{CO_3^{2 - } } \) is 0.83, and the experimental value is 0.64. During electrodialysis of the working solution, which contains sodium alginate at a concentration of 1–2 g l^?1, \(P_{Cl^ - }^{CO_3^{2 - } } \) decreases by 2–3 times in the current-density range 0.25–1 A dm^?2. Pretreatment of the membrane in a solution of sodium alginate having a concentration of 10 g l^?1 for 72 h decreases \(P_{Cl^ - }^{CO_3^{2 - } } \) from 0.50 (unmodified membrane) to 0.35.     

Tripodal lipophilic ionophores: synthesis, cation binding and transport through liquid membranes

New C₃-symmetric lipophilic tripodal ionophores, Et(CH₂OCH₂COR)₃; R=NMePh (1), R=NEtPh (2), R=piperidyl (3), have been prepared and their binding abilities for alkali and alkaline earth metal cations evaluated by extraction equilibrium and cation transport through bulk liquid membranes. Experiments show that these ionophores have considerable potential for transporting lithium, sodium and calcium ions relative to potassium and magnesium ions. The cation transport rates by ionophores 1 and 2 decrease in the order Li⁺>Na⁺>Ca²⁺>Ba²⁺>K⁺>Mg²⁺, and the selectivities of Li⁺/K⁺, Na⁺/K⁺ and Ca²⁺/Mg²⁺ are 6.47–7.24, 6.05–6.19 and 9.39–16.13, respectively. The extraction selectivity sequences of the ionophores 1 and 2 are in agreement with the descending order of the cation transport rate, and the complexation constants in chloroform phase were estimated.     

Effect of modification of a sulfonic cation-exchange membrane with cross-linked chitosan on the selectivity of the transport of magnesium and calcium ions relative to sodium ions

A procedure was suggested for modification of MK-40 sulfonic cation-exchange membrane by application of a chitosan layer onto its surface, followed by cross-linking of this layer with epichlorohydrin. The transport of magnesium, calcium, and sodium ions through cation-exchange membranes modified with cross-linked and non-cross-linked chitosan was studied.     

Selective Recognition of Calcium Ion through Liquid Membrane

The mole transport rate of alkaline earth metal ions through a bulk liquid membrane and a supported liquid membrane using a series of proton diionizable acyclic polyethers was measured. Among alkaline earth metal ions, the calcium ion was observed to be selectively transported in both single and competitive transport experiments. Potentiometric titration and solution calorimetric titration also gave calcium selectivity over other alkaline earth metal ions. Acyclic polyether bearing a diethylene glycol unit andn-tetradecyl lipophilic chain at the α position of carboxylic acid affords the best selectivity for the calcium ion in bulk and supported liquid membranes.     

Electrokinetic Phenomena in Sulfonated Cation-Exchange Membranes with Tetraalkylammonium Ions

The electric transport of solvent ions and molecules through membrane systems containing cations of tetraalkylammonium bases is studied. The interrelation between electrokinetic characteristics of sulfonated cation-exchange membranes at different degrees of their saturation with tetrabutylammonium ions and the content of water in membranes at equilibrium is established. A new type of conductor-insulator percolation transitions is revealed for homogeneous MF-4SK perfluorinated membranes saturated with organic counterions. This transition is interpreted with allowance for the concept of the governing role of narrow channels in the membrane microstructure. The electroosmotic permeability of MF-4SK membranes in solutions of sodium and tetraethylammonium chloride, as well as in their mixtures, is studied. An experimentally observed abnormally high amount of water transferred by tetraethylammonium ions is discussed with allowance for the dynamic hydration characteristics of ions.__________Translated from Kolloidnyi Zhurnal, Vol. 67, No. 4, 2005, pp. 485–493.Original Russian Text Copyright © 2005 by Kononenko, Berezina, Shkirskaya.     

Cation‐Transporting Peptides: Scaffolds for Functionalized Pores?

Protein pores that selectively transport ions across membranes are among nature’s most efficient machines. The selectivity of these pores can be exploited for ion sensing and water purification. Since it is difficult to reconstitute membrane proteins in their active form for practical applications it is desirable to develop robust synthetic compounds that selectively transport ions across cell membranes. One can envision tuning the selectivity of pores by incorporating functional groups inside the pore. Readily accessible octapeptides containing (aminomethyl)benzoic acid and alanine are reported here that preferentially transport cations over halides across the lipid bilayer. Ion transport is hypothesized through pores formed by stable assemblies of the peptides. The aromatic ring(s) appear to be proximal to the pore and could be potentially utilized for functionalizing the pore interior.     

Difference in transfer of magnesium and sodium ions through electrodialytic membranes modified with chitosan

The difference in transfer of magnesium and sodium ions through electrodialytic cation-exchange membranes modified with chitosan was studied. The membranes were modified by electrodeposition of chitosan from solution on the membrane surface in the course of electrodialysis, preliminary sorption of chitosan on the membrane surface from aqueous chitosan hydrochloride, or application of a chitosan film to the dry membrane surface. The Mg²⁺/Na⁺ selectivity of transfer through modified electrodialytic membranes was examined in relation to the current density.     

Radiotracer studies on calcium ion-selective electrode membranes based on poly(vinyl chloride) matrices

Radiotracer studies with ⁴⁵Ca and ³⁶Cl demonstrate that PVC matrix membranes containing Orion 92-20-02 liquid calcium ion-exchanger are permselective to counter-cations. Diffusion coefficients are quoted for the migration of ⁴⁵Ca between pairs of calcium solutions and are discussed in terms of solution concentration, membrane thickness and concentration level of sensor in the membrane. Migration of calcium ions from calcium chloride solution to a Group (II) metal chloride solution through a PVC membrane containing calcium liquid ion-exchanger is discussed in terms of solvent extraction and electrode selectivity coefficient parameters. Thus, magnesium, strontium and barium ions appear to inhibit migration through the membrane by their low affinity for the membrane liquid ion-exchanger sites, while the inhibition by beryllium ions is attributed to site blockage by the strong affinity of dialkylphosphate sites for beryllium.     

Incorporation of blood clotting factor X into phospholipid model membranes: fluorescence microscopy imaging and subphase effects surrounding the lipid phase transition region

Factor X is a blood clotting protein that associates at membrane surfaces to become activated during the coagulation cascade. A molecular level understanding of the protein-membrane phospholipid interactions has not been reached, although it is thought that the protein binds to phospholipids in the presence of calcium through a bridge with the Gla (gamma-carboxyglutamic acid) domain on the protein. In this work, phospholipid Langmuir monolayers have been utilized as model membranes to study factor X association with phospholipid membrane components. Surface pressure measurements indicate that subphase addition of sodium, magnesium, and calcium ions enhances protein penetration of the lipid monolayer, with the largest association found with calcium ions in the subphase. Fluorescence microscopy images collected after protein penetration of lipid monolayers indicate monolayer condensation in the presence of sodium and magnesium ions. Aggregation of lipid domains is induced when calcium is in the subphase, indicating binding-induced flocculation of surface lipid aggregates. Calcium binding to factor X likely causes a conformational change which allows protein-membrane interaction via hydrophobic association with lipid molecules.     

Determination of true selectivity coefficients of neutral carrier calcium selective electrode

Literature data concerning selectivity coefficients of neutral carrier calcium selective electrode show large discrepancies up to several orders of magnitude for sensors containing the same active component. It can be shown theoretically that determination of selectivity coefficients in non-complexing media gives too high values because of additional sources of the main ion in the membrane vicinity. Determination of selectivity coefficients in solutions containing a complexing agent gives the possibility to evaluate true selectivity coefficients not influenced by additional factors. Measurements performed in complexing as well as in non-complexing media and calculation of the detection limit indicate a good agreement between expectations and experimental results. This has been confirmed using the calcium selective electrode with the neutral carrier ETH 1001 witho-nitrophenyl octyl ether or dioctylsebacate as mediators. As interferents sodium, potassium and magnesium ions were tested.     

Electrodialytic transport properties of cation exchange membranes in the presence of cyclodextrins

After commercial cation exchange membranes (NEOSEPTA) had been immersed in an aqueous cyclodextrin solutions, electrodialysis of a 1:1 mixed solutions of alkaline earth metal ions and sodium chloride was carried out in the presence of cyclodextrins in the desalting side solution. Adsorption of the cyclodextrins in the membrane matrix was confirmed by IR spectrum, X-ray photoelectron spectroscopy (XPS) and the weight increase of each corresponding component of the membranes. As a result of adsorption of the cyclodextrins in the membranes, transport numbers of alkaline earth metal ions relative to sodium ions decreased compared with those of the membranes without cyclodextrins. Water content in the membrane increased and a ratio of calcium ions (alkaline earth metal ions) to sodium ions in the membrane phase decreased after adsorption of the cyclodextrins. This is due to existence of the compounds having hydrophilic outer surface, cyclodextrins, in the membrane matrix. The decrease in the transport number of calcium ions relative to sodium ions was due to both decrease in a ratio of mobility of calcium ions to that of sodium ions and decrease in an ionic ratio of calcium ions to sodium ions in the membrane phase.     

Applied potential and radiotracer studies on poly(vinyl chloride) matrix ion-selective electrode membranes

This paper reports the effect of applied potentials on PVC matrix membranes containing (i) the barium ion-sensitive barium-Antarox C0880 complex and 2-nitrophenyl phenyl ether solvent mediator, and (ii) the calcium ion-sensitive Orion 92-20-02 phosphate-based calcium liquid ion-exchanger. Platinum electrodes were placed in solutions on each side of the membranes. The barium ion-sensitive membranes are unable to maintain stable current flows but the calcium ion-sensitive membranes are characterized by stable current flows over prolonged periods even after successive polarity reversals. Results are presented, from radiotracer experiments for permeation of ions through the membranes with and without an applied potential. No evidence was found for significant permeation of barium-133 ions through the barium ion-sensing membranes into an initially inactive solution, but it was found that barium-133 ions were incorporated into the membranes after removal of the applied potential. Permeation of sodium-22 ions through the calcium ion-sensing membranes occurred only to a limited extent in the presence of an applied potential and not at all in its absence, confirming electrode selectivity trends for calcium and sodium. Calcium-45 ions did not permeate the calcium ion-sensing membranes into an inactive counter-solution against the potential gradient, but on reversal of the polarity, permeation occurred to a far greater extent than in the absence of an applied potential. These differences in behaviour are compatible with the more complicated membrane pathways of the barium ion-sensing membranes, imposed by the complexing of barium ions by the ethyleneoxy units of Antarox C0880 in a tight helical conformation. The calcium ion-sensing membranes are much less constrained, thus permitting more facile replacement of the calcium ions in the membrane by ions from solution.     

Calcium-selective electrode based on a calix[4]arene tetraphosphine oxide

A new ligand capable of producing calcium-selective electrodes with excellent characteristics is presented. The ligand (1) is a calix[4]arene bearing phosphine oxide ligating groups on the lower rim and this is the first report that such ligands can discriminate in favour of calcium ions against magnesium ions and the alkali metal ions. This calcium selectivity is in complete contrast to the behaviour of the well-known calix[4]arene tetraester derivatives (such as 2) which are selective for sodium against other alkali metal ions and group II ions. Electrodes based on PVC membranes incorporating ligand 1 display almost nernstian slopes and excellent selectivity against common interferants, including magnesium (log K(Ca,Mg)(pot)). The electrodes have demonstrated effective lifetimes of at least 7 weeks (duration of the study) and very fast response times.     

Molecular-sieving capabilities of mesoporous carbon membranes

The size-sieving properties of a mesoporous carbon membrane were studied via molecular permeation and cyclic voltammetry experiments. Two phenomena, simple diffusion and electrochemically aided diffusion, were investigated. Molecular diffusion through the membrane was caused by a concentration gradient across the membrane and was facilitated by electrosorption of ions under an externally applied electric field. The diffusion of molecules transported through the membrane was characterized by the values of permeability and apparent diffusion coefficient in the membrane. Because larger molecules are more restricted in terms of penetrating the pores, the size-based selectivity of the mesoporous carbon membrane could be readily observed. For example, in the two-component permeation experiment, a high selectivity (alpha=56.9) of anilinium over Rhodamine B was found. It is inferred that the diffusive transport of the larger Rhodamine B molecules with a more extensive retardation comes from the competitive mechanism between the two kinds of molecules in accessing the pore. A series of voltammetric experiments involving a mesoporous carbon membrane immersed in various electrolytes with ions of different sizes allowed the observation of ion-exclusion phenomena. It was found that the size effect is significant for electrochemically aided diffusion and electrosorption processes. The number of cations inside the pores of the membrane decreases with increasing cation size. This phenomenon is due to the size-exclusion effect, which could be demonstrated by the values of electrical double-layer capacitance for sodium, magnesium, and tetrahexylammonium cations, at potentials ranging from negative values to the point of zero charge, corresponding to 86.7, 73.1, and 50.0 F/g, respectively. The findings of this work manifest that the relationship between the pore size and the dimensions of the molecules determines the transport and sorption behavior of nanoporous carbon materials.     

Separation of sodium ions from trivalent chromium by electrodialysis using monovalent cation selective membranes

Trivalent chromium Cr(III) in wastewaters produced by leather tanning processes must be treated before discharge in the environment. Electrodialysis was studied for this application. Cr(III) ion is separated from sodium ion by using modified cation-exchange membranes. The membrane modification consists of a polyethylenimine layer electrodeposited on the membrane surface. This layer is positively charged in acidic media and repels multivalent ions while monovalent ions cross the membrane. The modified membrane in this study was a Nafion^® 324 membrane. The transfer of chromium, sodium, calcium, magnesium, chloride and sulphate ions from a mixture was investigated. The pH must be regulated in order to avoid chromium hydroxide precipitation in the dilute chamber. The behaviour of sulphate chloride system is unusual for the AMX membrane. Adsorption of PEI on the membrane surface is assumed to explain this behaviour. The overall current efficiency was close to 96–98% for cations and anions.     

环烷酸类载体液膜体系对金属离子传输机理的研究

本文先在大块液膜体系中以环已烷甲酸为载体,通过正交设计,系统地研究了各种因素对希土离子输送作用的影响规律。比较了相同条件下RE~(3+)(希土)同Na~+,NH_4~+、Ca~(2+)和Fe~(3+)等离子的输送作用。发现在适当条件下,无皂化的羧酸载体对RE~(3+)离子具有良好的输送效果,同时证实,羧酸输送RE~(3+)离子是通过三个H~+离子与一个RE~(3+)离子的交换,而当载体皂化时,皂化的载体直接与接收相H~+离子发生交换,从而降低了羧酸对RE~(3+)离子的输送和分离效果。 在大块液膜研究的基础上,建立了一个以无皂化的环烷酸为载体的乳状液膜体系,从模拟离子矿的硫酸铵浸出液中萃取希土,通过正交试验确定了最优的液膜萃取条件,希土萃取率达96％以上,富集度30～40倍。     

Novel proton-conducting polymer inclusion membranes

The preparation and characterization of new polymer inclusion membranes (PIMs) for proton transport is described. PIMs were prepared with different polymeric cellulose-based compounds and PVC as supports, tris(2-butoxyethyl)phosphate (TBEP) and 2-nitrophenyl octyl ether (NPOE) as plasticizers and dinonylnaphthalenesulfonic acid (DNSA) and dinonylnaphthalenedisulfonic acid (DNDSA) as carriers. The effects of the nature and content of the supports, plasticizers and carriers on membrane proton conductivity was studied using electrochemical impedance spectroscopy (EIS). This technique was also used to evaluate the chemical stability of a CTA–NPOE–DNDSA membrane while its selectivity was monitored with respect to sodium and calcium ions through counter-transport experiments. DSC and TGA techniques were used to determine the thermal stability of these membranes. A PIM based on CTA–DNDSA–NPOE showed the highest proton conductivity (3.5 mS/cm) with no variation of its behavior during 2 months of evaluation. FTIR characterization did not show structural changes of the membrane in this period of time. Thermal analysis indicates that it is stable up to 180 °C. An empirical functional relationship between PIM resistance and composition indicates that increasing plasticizer and carrier concentrations enhances the conductivity of the membranes, while increasing CTA content tends to decrease this property. Transport experiments showed a good selectivity of the CTA–DNDSA–NPOE membrane for protons over calcium or sodium ions.     

Local anesthetics facilitate ion transport across lipid planar bilayer membranes under an electric field: dependence on type of lipid bilayer

In order to elucidate the role of structural change of lipid membrane bilayer in the mode of action of local anesthetic, we studied the effects of local anesthetics, charged tetracaine and uncharged benzocaine, on ion permeability across various lipid planar bilayers (PC, mixed PC/PS (4/1, mol/mol); mixed PC/PE (1/1, mol/mol); mixed PC/SM (4/1, mol/mol)) under a constant applied voltage. The membrane conductances increased in the order of PC  PC/PS ≤ PC/SM  PC/PE. When the constant voltage of −100 or −70 mV was applied through the lipid bilayer membranes in the presence of positively charged tetracaine, the fluctuating current pulses with the large amplitude generated, but not appeared in the absence of tetracaine. The addition of uncharged benzocaine generated the fluctuating currents with the small amplitude. Both charged tetracaine and uncharged benzocaine facilitated electrophoretically the transport of small ions such as KCl in the buffer solution through the fluctuating pores in the lipid bilayer membranes formed by interaction with the local anesthetic under the negative applied membrane potential. The current pulses also contained actual transport of charged tetracaine together with the transport of the small ions. The amplitude and the duration time of the electrical current generated by adding the local anesthetics were dependent on the type of the lipid, the applied voltage and its voltage polarity.     

杯芳烃衍生物液－液萃取和液膜传输银的对比研究及机理探讨

以4类含硫、硒、氮等杂原子基团二取代的杯[4]芳烃五衍生物（1－14）为中 性载体，在H2O-CHCl3-苦味酸体系萃取银和H2O-CHCl3-H2O液膜体系中传输银进行 了对比研究。萃取和传输结果具有一致性，除了苯并噻唑取代的杯[4]芳烃衍生物 （3－6）外，其它10个含硫、硒、氮的杯[4]芳烃衍生物1－14均对软重金属银和汞 有很高的选择性，而吡啶取代的杯[4]芳烃衍生物7－10对铅有一定的萃取选择性， 其中羟基硫醚取代的杯[4]芳烃衍生物11－14对银的萃取率和传输速率最大。并且 就杯[4]芳烃衍生物对银的传输机理进行了探讨，发现传输速率随源相中金属离子 浓度和有机相中载体浓度的增加而增大，因此推论这是由金属离子浓度梯度推动下 的传输。     

Rate of Generation of Ions H<Superscript>+</Superscript> and OH<Superscript>−</Superscript> at the Ion-Exchange Membrane/Dilute Solution Interface as a Function of the Current Density

Partial currents of water dissociation products through cation- and anion-exchange membranes that form thin desalination channels in electrodialyzers are measured. The investigations are performed in a broad interval of flow rates during desalination of dilute sodium chloride solutions at overlimiting currents. A water dissociation theory, which was developed for bipolar membranes, and a mass transfer theory that allows for the space charge formation at overlimiting currents are used to derive an expression, according to which the rate of generation of the H⁺ and OH^? ions is defined by the ratio of the current density to its critical value at which water starts undergoing discernible dissociation.