Vesicle-micelle transition in aqueous mixtures of the cationic dioctadecyldimethylammonium and octadecyltrimethylammonium bromide surfactants

The vesicle-micelle transition in aqueous mixtures of dioctadecyldimethylammonium and octadecyltrimethylammonium bromide (DODAB and C(18)TAB) cationic surfactants, having respectively double and single chain, was investigated by differential scanning calorimetry (DSC), steady-state fluorescence, dynamic light scattering (DLS) and surface tension. The experiments performed at constant total surfactant concentration, up to 1.0 mM, reveal that these homologous surfactants mix together to form mixed vesicles and/or micelles, depending on the relative amount of the surfactants. The melting temperature T(m) of the mixed DODAB-C(18)TAB vesicles is larger than that for the neat DODAB in water owing to the incorporation of C(18)TAB in the vesicle bilayer. The surface tension decreases sigmoidally with C(18)TAB concentration and the inflection point lies around x(DODAB) approximately 0.4, indicating the onset of micelle formation owing to saturation of DODAB vesicles by C(18)TAB molecules. When x(DODAB)>0.5 C(18)TAB molecules are mainly solubilised by the vesicles, but when x(DODAB)<0.25 micelles are dominant. Fluorescence data of the Nile Red probe incorporated in the system at different surfactant molar fractions indicate the formation of micelle and vesicle structures. These structures have apparent hydrodynamic radius R(H) of about 180 and 500-800 nm, respectively, as obtained by DLS measurements.     

Interactions of two homologues of cationic surface active ionic liquids with sodium carboxymethylcellulose in aqueous solution

In the preceding paper of this series, we studied the interactions of copolymers with the ionic liquids, 1-alkyl-3-methylimidazolium bromide (C _n mimBr, n?=?8, 10, 12, 14, 16) and N-alkyl-N-methylpyrrolidinium bromide (C _n MPB, n?=?12, 14, 16). An obvious difference was detected between the interaction mechanism and the alkyl chain length of the surfactant. In the present study, we performed a systematic study on the interaction of sodium carboxymethylcellulose (NaCMC) with ionic liquids in aqueous solution by isothermal titration microcalorimetry (ITC), conductivity, turbidity, and dynamic light scattering (DLS) measurements. The existence of electrostatic attraction between NaCMC and ILs could increase the complexity of these systems. The results show that the monomers of C₈mimBr can bind to the NaCMC chains and form free surfactant micelles in the solution, while no micelle-like C₈mimBr/NaCMC cluster is detected. For other surfactants, the formation of surfactant/NaCMC clusters in the solution is driven by electrostatic and hydrophobic interactions, which could be divided into two types. One type is the polymer-induced surfactant/NaCMC complexes that form in the solution for the surfactant of C _n mimBr (n?=?10, 12, 14) or C _n MPB (n?=?12, 14). The other type is that the surfactant-induced surfactant/NaCMC complexes come into being for the surfactant of C₁₆mimBr or C₁₆MPB. Finally, the different modes of complex formation proposed have a good interpretation of the experiment results, unraveling the details of the effect of surfactant alkyl chain length and headgroup on the surfactant–NaCMC interactions.     

Interaction between two homologues of cationic surface active ionic liquids and the PEO-PPO-PEO triblock copolymers in aqueous solutions

The interaction of nonionic triblock copolymers of poly(ethyleneoxide) (PEO) and poly(propyleneoxide) (PPO) (PEO_nPPO_mPEO_n) with a series of cationic surface-active ionic liquids in aqueous solutions have been investigated. The cationic surface-active ionic liquids include 1-alkyl-3-methylimidazolium bromide (C_nmimBr, n?=?8, 10, 12, 14, 16) and N-alkyl-N-methylpyrrolidinium bromide (C_nMPB, n?=?12, 14, 16). For different polymer-surfactant systems, the critical aggregation surfactant concentration (cac), the surfactant concentration to form free micelles (C _m), and the saturation concentration of surfactant on the polymer chains (C ₂) were determined using isothermal titration microcalorimetry (ITC) and conductivity measurements. The structure of the formed aggregates depended strongly on the hydrophobicity of the surfactant and the ratio of polymer/surfactant concentration. For C₈mimBr, there were not any micelle-like surfactant?Cpolymer clusters detected in the solution, and only micelles appeared. For other surfactants, the polymer?Csurfactant aggregates were formed in the solution, which was verified by the appearance of a broad endothermic peak in the ITC thermograms. The intensity of polymer?Csurfactant interaction increased with the hydrophobicity of the surfactants and the polymers but was not affected by the surfactant headgroups.     

Micelle Formation and Aggregate Morphology Transition from Vesicle to Rod Micelle for Allyl Alkyldimethylammonium Bromide Cationic Surfactant

A series of cationic surfactants of allyl alkyldimethylammonium bromide (AA_nDB), where n=12, 16, 18, were synthesized, and the adsorption behavior of AA_nDB at the air–water interface and the aggregation morphology in bulk solution were reported. The critical micelle concentration (CMC) was determined by the drop volume technique and steady state fluorescence. The surface excess concentration of AA_nDB surfactants was calculated from the surface tension versus log concentration curves by applying the Gibbs' adsorption isotherm. The values of surface area per molecule calculated by using Gibbs' equation were 2.9–1.4 nm², indicating the relatively large size of the AA_nDB surfactants. Dynamic light scattering (DLS) and transmission electron microscopy (TEM) measurements reveal that, at low surfactant concentration of allyl dodecyl dimethylammonium bromide (AA₁₂DB) above CMC, vesicles can be spontaneously formed. However, with increasing surfactant concentration, vesicles tend to be transformed into rod‐like micelles.     

Zwitterionic heterogemini surfactants containing ammonium and carboxylate headgroups. 1. Adsorption and micellization

Zwitterionic heterogemini surfactants with two hydrocarbon chains and two different hydrophilic groups, N,N-dimethyl-N-[2-(N'-alkyl-N'-beta-carboxypropanoylamino)ethyl]-1-alkylammonium bromides (2C(n)AmCa, where n represents the hydrocarbon chain lengths of 8, 10, 12, and 14), were synthesized by N,N-dimethylethylenediamine with alkyl bromide, followed by reaction with succinic anhydride. One of the hydrophilic groups is a carboxylate anion, and the other is an ammonium cation. Their physicochemical properties were characterized by measuring equilibrium and dynamic surface tension, fluorescence intensity of pyrene, and light-scattering intensity. A relationship between a logarithm of critical micelle concentration (cmc) and hydrocarbon chain length showed a linear decrease upon increasing chain length and then a departure from linearity at n = 14. This is due to the existence of premicellar aggregations at concentrations below the cmc for n = 14. The surface tension of 2C(n)AmCa reached 27-30 mN m(-1) at each cmc, indicating efficiencies typical of hydrocarbon chain surfactants. The adsorbing rate at the air/water interface became slow with an increase of the chain length. From the fluorescence intensity ratios of 373 and 384 nm using pyrene as a probe, for n = 8, 10, and 14, the pyrene was solubilized in surfactant micelles at around the cmc, whereas for n = 12 the pyrene was solubilized from a concentration of 10-fold the cmc. The scattering intensities by dynamic light scattering also increased from around these concentrations for each chain length, showing the formation of aggregates in solution.     

Fluorescence delineation of the surfactant microstructures in the CTAB-sOS-H2O catanionic system

A key feature of amphiphilic molecules is their ability to undergo self-assembly, a process in which a complex hierarchical structure is established without external intervention. Ternary systems consisting of aqueous mixtures of cationic and anionic surfactants exhibit a rich array of self-assembled microstructures such as spherical and rodlike micelles, unilamellar and multilamellar vesicles, planar bilayers, and bicontinuous structures. In general, multiple complementary techniques are required to explore the phase behavior and morphology of aqueous systems of oppositely charged surfactants. As a novel and effective alternative approach, we use fluorescence spectroscopic measurements to examine the microstructures of aqueous cationic/anionic surfactant systems in the dilute surfactant region. In particular, we demonstrate that the polarity-sensitive fluorophore prodan can be used to demarcate the surfactant microstructures of the ternary system of cetyltrimethylammonium bromide, sodium octyl sulfate, and water. As the fluorescence signature of this probe is dependent on the nature of the surfactant aggregates present, our method is a promising new approach to effectively map complex surfactant phase diagrams.     

FLUORESCENCE PROBE FOR MICROENVIRONMENTS: A NEW PROBE FOR MICELLE SOLVENT PARAMETERS AND PREMICELLAR AGGREGATES

Abstract— A previous study on the electronic spectroscopy of p -N,N-dialkylaminobenzylidenemalononitrile, 1, has been extended to a larger variety of organic solvents and to micelles of ionic and nonionic surfactants. By comparing the fluorescence emission (λ_F and φ_∫) of 1 in micelles and in homogeneous organic solvents, the effective polarity and the microviscosity of the micellar environments of potassium dodecanoate, sodium dodecyl sulfate, cetyltrimethylammonium bromide and Triton X-100 micelles have been determined to be 40, 40, 36 and 28, respectively and 23, 31, 34 and 28 cP, respectively. These results indicate that the fluorescence probe is located in the micelle–water interface of a micelle and this region of a micelle is polar and viscous. 1 has also been studied in different surfactants with varying surfactant concentrations. The φ_∫ of 1, a microviscosity gauge for micellar aggregates, remains unchanged at the critical micelle concentrations of various surfactants, but decreases at much lower surfactant concentrations. This is attributable to the formation of premicellar aggregates of surfactant molecules below their critical micelle concentrations.     

Salt effect on the complex formation between polyelectrolyte and oppositely charged surfactant in aqueous solution

The complex formation between sodium carboxymethylcellulose (NaCMC) and dodecyltrimethylammonium bromide (DTAB) at various sodium bromide concentrations (C(NaBr)) has been studied by microcalorimetry, turbidimetric titration, steady-state fluorescence measurements, and the fluorescence polarization technique. The addition of salt is found to influence the formation of NaCMC/DTAB complexes markedly. At C(NaBr) = 0.00, 0.01, 0.02, 0.10, and 0.20 M, DTAB monomers form micelle-like aggregates on NaCMC chains to form NaCMC/DTAB complexes above the critical surfactant concentration (C1). At C(NaBr) = 0.23 M, DTAB molecules first form micelles above a 2.46 mM DTAB concentration prompted by the added salt, and then, above C1 = 4.40 mM, these micelles can aggregate with NaCMC chains to form NaCMC/DTAB complexes. However, at C(NaBr) = 0.25 M, there is no NaCMC/DTAB complex formation because of the complete salt screening of the electrostatic attraction between DTAB micelles and NaCMC chains. It is also surprisingly found that the addition of NaBr can bring out a decrease in C1 at C(NaBr) < 0.20 M. Moreover, the addition of NaBr to a mixture of 0.01 g/L NaCMC and 3.6 mM DTAB can directly induce the formation of NaCMC/DTAB complexes. This salt-enhancing effect on the complex formation is explained as the result of competition between the screening of interaction of polyelectrolyte with surfactant and the increasing of polyelectrolyte/surfactant interaction owing to the growth of micelles by added salt. When the increasing of polyelectrolyte/surfactant interaction exceeds the screening of interaction, the complex formation can be enhanced.     

Mixed micellar properties of cationic trimeric-type quaternary ammonium salts and anionic sodium n-octyl sulfate surfactants

The properties of quaternary ammonium salt-type cationic trimeric surfactants (m-2-m-2-m, m represents the carbon atom number in alkyl chain lengths of 8, 10, and 12) and oppositely charged anionic monomeric surfactant, sodium n-octyl sulfate (SOS), were characterized by employing several techniques such as static surface tension, fluorescence spectroscopy, and dynamic light-scattering measurements. The critical micelle concentrations (cmc) of m-2-m-2-m were much lower than those of the corresponding dimeric and monomeric surfactants, and decreased with increasing chain length. The addition of SOS to m-2-m-2-m solutions resulted in a further decrease of the cmc. The mixed surfactants showed higher efficiencies in lowering the surface tension than the individual surfactants. The fluorescence measurements suggested the formation of mixed micelles with a hydrophobic environment in the solutions even at lower concentrations. The dynamic light-scattering study indicated the presence of two different kinds of aggregates with different hydrodynamic diameters. The larger one was attributed to the mixed micelle of m-2-m-2-m and SOS. These results indicated a decline of the electrostatic repulsion between cationic head groups through the incorporation of anionic surfactant into the mixed surfactants.     

Spectroscopic investigations on the binding of ammonium salt of 8-anilino-1-naphthalene sulfonic acid with non-ionic surfactant micelles in aqueous media

The anionic dye 8-anilino-1-napthalensulfonic acid ammonium salt, or ANS, was used as a fluorescent probe to investigate the behaviour of dye-surfactant interactions in aqueous solutions of Triton X-100 and the Brij and polyoxyethylene tridecyl ether (POE TDE) series of polyoxyethylene non-ionic surfactants. The fluorescence behaviour of the dye with the non-ionic surfactants was examined in micellar media. The concentration of surfactant was kept well above the cmc to investigate the interaction of the dye with surfactant micelles. In this investigation, the relative fluorescence enhancements, binding constants of the dye to the surfactant micelles and aggregation numbers of the micelles were determined, from the analysis of spectroscopic data.     

Physicochemical studies of pyridinium gemini surfactants with promethazine hydrochloride in aqueous solution

The mixed micellization and interfacial behavior of pyridinium gemini surfactants, 1,1'-(1,1'-(ethane-1,2-diylbis-(sulfanediyl))bis(alkane-2,1-diyl))dipyridinium bromide, i.e., [12-(S-2-S)-12], [14-(S-2-S)-14], [16-(S-2-S)-16] with a phenothiazine tranquilizer drug, promethazine hydrochloride (PMT), has been investigated by conductivity, surface tension and steady state fluorescence measurements. Different spectroscopic techniques like fluorescence, UV-visible and NMR were also employed to understand the nature of interactions between the pyridinium gemini surfactants and PMT. The various micellar, interfacial and associated thermodynamic parameters for different mole fractions of PMT-pyridinium gemini surfactant mixtures have been evaluated. Synergism was observed in the mixed micelle as well as the monolayer formed by these mixtures. The fluorescence quenching experiment indicates that the interactions between PMT and surfactants are hydrophobic in nature. The UV-visible measurements reveal the distinct formation of a drug-surfactant complex. The detailed mechanism for the type of interactions was further studied by NMR titrations which show cation-π interactions between PMT and pyridinium gemini surfactant molecules.     

Indomethacin solubilization induced shape transition in CnE7 (n=14,16) nonionic micelles

Shape transitions were examined with regard to the solubilization of the poorly water-soluble drug indomethacin (IMC) in the nonionic surfactants heptaethylene oxide tetradecyl (C14E7) and hexadecyl (C16E7) ethers by means of a dynamic light scattering technique. The cloud points of the pure C14E7 and C16E7 micelles ranged from 58 to 62 degrees C and from 52.1 to 55.6 degrees C, respectively, at surfactant concentrations of 1 to 10 mM. The cloud points of IMC-solubilized micelles increased by approximately 1 to 5 degrees . The sizes of the pure C14E7 micelles were 4 to 14 nm at 20 to 40 degrees C at a concentration of 2 to 20 mM. The apparent hydrodynamic radius (R happ) of pure C16E7 micelles varied with temperature and concentration. C16E7 surfactant formed small spherical micelles at 20 and 25 degrees C at concentrations below 5 mM; the size of the micelles was approximately 5 nm. On the other hand, from 30 to 40 degrees C and at a higher concentration, C16E7 formed elongated cylindrical micelles, and these elongated micelles entangled or overlapped each other. The R happ of the IMC-solubilized C14E7 micelles at 20 to 40 degrees C and of C16E7 micelles at 20 degrees C increased compared to that of pure micelles. On the other hand, the cylindrical micelles of C16E7 decreased in size and turned into spherical ones because of the hydrophobicity between the micelles caused by solubilization of IMC. This phenomenon was confirmed by transmission electron microscope (TEM) images.     

Solubilization mechanism of vesicles by surfactants: effect of hydrophobicity

Simulations based on dissipative particle dynamics are performed to investigate the solubilization mechanism of vesicles by surfactants. Surfactants tend to partition themselves between vesicle and the bulk solution. It is found that only surfactants with suitable hydrophobicity are able to solubilize vesicles by forming small mixed micelles. Surfactants with inadequate hydrophobicity tend to stay in the bulk solution and only a few of them enter into the vesicle. Consequently, the vesicle structure remains intact for all surfactant concentrations studied. On the contrary, surfactants with excessive hydrophobicity are inclined to incorporate with the vesicle and thus the vesicle size continues to grow as the surfactant concentration increases. Instead of forming discrete mixed micelles, lipid and surfactant are associated into large aggregates taking the shapes of cylinders, donuts, bilayers, etc. For addition of surfactant with moderate hydrophobicity, perforated vesicles are observed before the formation of mixed micelles and thus the solubilization mechanism is more intricate than the well-known three-stage hypothesis. As the apparent critical micellar concentration (φ(s,v)(a,CMC)) is attained, pure surfactant micelles form and the vesicle deforms because the distribution of surfactant within the bilayer is no longer uniform. When the surfactant concentration reaches φ(s,v)(p), the vesicle perforates. The extent of perforation grows with increasing surfactant concentration. The solubilization process begins at φ(s,v) (sol), and lipids leave the vesicle and join surfactant micelles to form mixed micelles. Eventually, total collapse of the vesicle is observed. In general, one has φ(s,v)(a,CMC)≤φ(s,v)(p)≤φ(s,v)(sol).     

Phase Behavior of Bis(Quaternary Ammonium Bromide)/Sodium Cholate/H2O System

Interactions in an oppositely charged surfactant mixture composed of a gemini surfactant (bis(quaternary ammonium bromide)) and a bile salt (sodium cholate) in water were studied at 30°C. A combination of techniques was used including surface tension, conductometry, light scattering, light microscopy, and microelectrophoretic measurements. A strong dependence of the phase behavior on the molar ratio and actual concentration of surfactants was found. The interplay between electrostatic effects, geometry of molecules, and dissimilar separation of the hydrophobic and hydrophilic moieties in the surfactants dictate the interaction mode and the microstructures formed. Instead of precipitation, in the equivalent mixtures formation of complexes, mixed micelles, vesicles, coacervates, and solid crystalline phases have been observed. The extent of interacting forces in mixed micelles formed in equivalent mixtures was evaluated by regular solution theory. A relatively high negative value of interaction parameter indicated a strong attractive interaction between surfactants. The compositions of both mixed micelles and mixed monolayer are found to be almost equimolar.     

Cloud point variation of amphiphilic drug promethazine hydrochloride with added surfactants

In this paper we report clouding phenomenon occurring in an amphiphilic phenothiazine drug promethazine hydrochloride (PMT) in presence of surfactants. Cationic and nonionic surfactants increase the CP of 75 mM PMT solutions (prepared in 10 mM sodium phosphate buffer). These surfactants form mixed micelles with PMT. Anionic surfactants also form mixed micelles with the drug but the CP behavior is different by showing a peaked behavior. At low concentrations, anionic surfactants hinder micelle formation by forming ion-pairs whereas the usual CP decreasing effect at higher concentrations is due to mixed micellization. The CP behavior of 75 mM PMT+50 mM TBAB+surfactant systems is also explored which is found similar to PMT+surfactant systems with the difference only in magnitude of the clouding temperature.     

Fluorescence, circular dichroism, light scattering, and microscopic characterization of vesicles of sodium salts of three N-acyl peptides

Aggregation behavior of three N-acyl peptide surfactants, sodium N-(4-n-dodecyloxybenzoyl)-L-alyl-L-valinate (SDBAV), L-valyl-L-alaninate (SDBVA), and L-valyl-L-valinate (SDBVV), were investigated. The amphiphiles have very low critical aggregation concentration (cac). Fluorescence anisotropy studies using 1,6-diphenyl-1,3,5-hexatriene (DPH) as a fluorescent probe indicated formation of bilayer aggregates in dilute solution. Transmission electron micrographs showed the existence of large vesicles in dilute solution. Circular dichroism spectra suggested formation of helical aggregates. The vesicle formation was found to be more favored at neutral pH. Dynamic light scattering was used to measure hydrodynamic radius of the vesicles. The microviscosity of the vesicles formed by the amphiphiles was determined by use of fluorescence anisotropy and the lifetime of the DPH probe. The vesicles formed by the surfactants are stable at temperatures above body temperature and for a long period of time. Fluorescence probe studies, however, indicated transformation of vesicles to rod-like micelles at surfactant concentrations much higher than the cac value. Addition of sodium chloride also transformed the vesicles to rod-like micelles.     

Preparation and evaluation of magnetic carbonaceous materials for pesticide and metal removal

When diluted solutions of giant micelles are under turbulent flow, large attenuations of the turbulence can be observed due to the action of the micelles on the dissipative vortices formed within the flow. This particular property is rapidly lost when the solution is heated due breakup of the giant micelles. Based on this property, we present a thermal-flow study of a mixed giant micelle formed by the combination of two surfactants and sodium salicylate. One of the surfactants, cetyltrimethylammonium bromide (C(16)TAB) was kept fixed, and the others were dodecyltrimethylammonium bromide (C(12)TAB), tetradecyltrimethylammonium bromide (C(14)TAB), octadecyltrimethylammonium bromide (C(18)TAB), polyoxyethylene (10) oleyl ether (Brij 97) or sodium dodecyl sulfate (SDS). Thermal diagrams for the combinations of the surfactants reveal deviations of the ideality. For the cationic surfactants, a synergistic effect was only observed when C(16)TAB was combined with the shorter surfactants.     

Thermodynamics of micellization of multiheaded single-chain cationic surfactants

The energetics of micelle formation of three single-chain cationic surfactants bearing single (h = 1), double (h = 2), and triple (h = 3) trimethylammonium [(+)N(CH(3))(3)] headgroups have been investigated by microcalorimetry. The results were compared with the microcalorimetric data obtained from well-known cationic surfactant, cetyl trimethylammonium bromide (CTAB), bearing a single chain and single headgroup. The critical micellar concentrations (cmc's) and the degrees of counterion dissociation (alpha) of micelles of these surfactants were also determined by conductometry. The cmc and the alpha values increased with the increase in the number of headgroups of the surfactant. The relationship between the cmc of the surfactant in solution and its free energy of micellization (DeltaG(m)) was derived for each surfactant. Exothermic enthalpies of micellization (DeltaH(m)) and positive entropies of micellization (DeltaS(m)) were observed for all the surfactants. Negative DeltaH(m) values increased from CTAB to h = 1 to h = 2 and decreased for h = 3 whereas DeltaS(m) values decreased with increase in the number of headgroups. The DeltaG(m) values progressively became less negative with the increase in the number of headgroups. This implies that micelle formation becomes progressively less favorable as more headgroups are incorporated in the surfactant. From the steady-state fluorescence measurements using pyrene as a probe, the micropolarities sensed by the probe inside various micelles were determined. These studies suggest that the micelles are more hydrated with multiheaded surfactants and the micropolarity of micelles increases with the increase in the number of headgroups.     

Encapsulation of curcumin in cationic micelles suppresses alkaline hydrolysis

The alkaline hydrolysis of curcumin was studied in three types of micelles composed of the cationic surfactants cetyl trimethylammonium bromide (CTAB) and dodecyl trimethylammonium bromide (DTAB) and the anionic surfactant sodium dodecyl sulfate (SDS). At pH 13, curcumin undergoes rapid degradation by alkaline hydrolysis in the SDS micellar solution. In contrast, alkaline hydrolysis of curcumin is greatly suppressed in the presence of either CTAB or DTAB micelles, with a yield of suppression close to 90%. The results from fluorescence spectroscopic studies reveal that while curcumin remains encapsulated in CTAB and DTAB micelles at pH 13, curcumin is dissociated from the SDS micelles to the aqueous phase at this pH. The absence of encapsulation and stabilization in the SDS micellar solution results in rapid hydrolysis of curcumin.     

Adsorption, association and precipitation in hexadecyltrimethylammonium bromide/sodium dodecyl sulfate mixtures

The phase equilibria of surfactant aqueous mixtures, hexadecyltrimethylammonium bromide and sodium dodecyl sulfate, have been studied by polarizing microscopy, quasielastic light scattering, conductivity, potentiometric, electrophoretic, and surface tension measurements. Adsorption at the air/solution interface, association and precipitation in bulk solution strongly depended on the molar ratio and the concentration of surfactants. Catanionic vesicles coexisted with crystalline catanionic salts in a broad concentration range. The relative proportions of crystallites and vesicles varied according to the concentration and the molar ratio of the surfactants. The solid crystalline phase was progressively converted to catanionic vesicles with increasing surfactant molar ratio. At the highest excess of one of the surfactants transition from catanionic vesicles to mixed micelles occurred. The formation and stability of different phases are discussed in terms of surfactant molecular packing constraints and electrostatic interactions in the headgroup region. Surfactant tail-length asymmetry and the change of electrostatic interactions in the headgroup region from attractive to repulsive are governing factors for the transition from planar to curved bilayers. Received: 9 June 1998 Accepted: 18 August 1998