Asymmetric conjugate additions to 1,1′-diactivated cyclic enones—a comparative study

A study of copper-phosphoramidite-catalysed ZnR₂ and AlR₃ additions to 1,1′-dicarbonyl-activated cyclic Michael acceptors has revealed high enantioselectivities for AlR₃ (R = Me, Et) 1,4-addition to a range of 3-acylcoumarins (85–98% ee, trans:cis ～90:10) using commercial or readily available ligands. Large substituents at the 6-position, and to some extent at the 5-position, of the coumarin are less well tolerated, nor is truncation of the coumarin motif to a comparable 2-acylcyclohexenone (ee values up to 78%).     

A guide to Sonogashira cross-coupling reactions: the influence of substituents in aryl bromides, acetylenes, and phosphines

The conversion-time data for 168 different Pd/Cu-catalyzed Sonogashira cross-coupling reactions of five arylacetylenes (phenylacetylene; 1-ethynyl-2-ethylbenzene; 1-ethynyl-2,4,6-R(3)-benzene (R = Me, Et, i-Pr)) and Me(3)SiCCH with seven aryl bromides (three 2-R-bromobenzenes (R = Me, Et, i-Pr); 2,6-Me(2)-bromobenzene and three 2,4,6-R(3)-bromobenzenes (R = Me, Et, i-Pr)) with four different phosphines (P-t-Bu(3), t-Bu(2)PCy, t-BuPCy(2), PCy(3)) were determined using quantitative gas chromatography. The stereoelectronic properties of the substituents in the aryl bromides, acetylenes, and phosphines were correlated with the performance in Sonogashira reactions. It was found that the nature of the most active Pd/PR(3) complex for a Sonogashira transformation is primarily determined by the steric bulk of the acetylene; ideal catalysts are: Pd/P-t-Bu(3) or Pd/t-Bu(2)PCy for sterically undemanding phenylacetylene, Pd/t-BuPCy(2) for 2- and 2,6-substituted arylacetylenes or Me(3)SiCCH and Pd/PCy(3) for extremely bulky acetylenes and aryl bromides. Electron-rich and sterically demanding aryl bromides with substituents in the 2- or the 2,6-position require larger amounts of catalyst than 4-substituted aryl bromides. The synthesis of tolanes with bulky groups at one of the two aryl rings is best done by placing the steric bulk at the arylacetylene, which is also the best place for electron-withdrawing substituents.     

Preparation of mononuclear tungsten tris(sulfido) and molybdenum sulfido-tetrasulfido complexes with hydridotris(pyrazolyl)borate coligand and conversion of the former into sulfido-bridged bimetallic complex having Pt(mu-S)2WS core

Treatment of [Et4N][(Me2Tp)W(CO)3] (Me2Tp = HB(3,5-dimethylpyrazol-1-yl)3) with S8 in DMF at room temperature afforded a tris(sulfido) complex [Et4N][(Me2Tp)WS3] (1a), while that of [Et4N][TpW(CO)3] (Tp = HB(pyrazol-1-yl)3) in MeCN resulted in the formation of [Et4N][TpWS3] (1b) along with [Et4N]2[[WO(S2)2]2(mu-S)] (6) as a byproduct. Under similar conditions, [Et4N][(Me2Tp)Mo(CO)3] gave a mixture of a sulfido-tetrasulfido complex [Et4N][(Me2Tp)MoS(S4)] (2a) and its monooxo analogue [Et4N][(Me2Tp)MoO(S4)], although a sulfido-tetrasulfido complex [Et4N][TpMoS(S4)] (2b) was exclusively obtained from [Et4N][TpMo(CO)3]. The reaction of 1a with [PtCl2(cod)] (cod = 1,5-cyclooctadiene) in MeCN at room temperature led to the formation of a sulfido-bridged mixed-metal complex [Et4N][(Me2Tp)WS(mu-S)2PtCl2] (10). The structures of new complexes have been determined in detail by the X-ray analyses for 1a.MeCN, 1b, 2a, 2b, 6, and 10.     

3-甲基-2(1H)-喹喔啉系列衍生物的电子轰击质谱

用电子轰击质谱（EI－MS）研究了1－烷基－3－甲基－2（1H）－喹喔啉－2－酮（烷基为H，CH3，Et,n-C5H11),1-烷基－3－甲基－6－硝基－2（1H）－喹喔啉－2－酮（烷基为CH3，Et)和1－甲基－3－甲基－6－胺基－2（1H）－喹喔啉－2－酮，结合其结构特征总结出一些裂解规律。讨论了不同取代基对这类化合物熔点的影响，结果表明：在同类喹喔啉化合物中，随着烷基链的增长，样品熔点通常会有所降低，而硝基及胺基的引入会使其熔点升高。     

Solvent control: dinuclear versus tetranuclear complexes of a bis-tetradentate pyrimidine-based ligand

A new bis-tetradentate acyclic amine ligand L(Et) has been synthesized from 4,6-bis(aminomethyl)-2-phenylpyrimidine and 2-vinylpyridine. Dinuclear complexes, Mn(II)(2)L(Et)(MeCN)(H(2)O)(3)(ClO(4))(4) (1), Fe(II)(2)L(Et)(H(2)O)(4)(BF(4))(4) (2), Co(II)(2)L(Et)(H(2)O)(3)(MeCN)(2)(BF(4))(4) (3), Ni(II)(2)L(Et)(H(2)O)(4)(BF(4))(4) (4), Ni(II)(2)L(Et)(H(2)O)(4)(ClO(4))(4)·8H(2)O (4'), Cu(II)(2)L(Et)(BF(4))(4)·MeCN (5), Zn(II)(2)L(Et)(BF(4))(2)(BF(4))(2)·?MeCN (6), were obtained from 1 : 2 reactions of L(Et) and the appropriate metal salts in MeCN, whereas in MeOH tetranuclear complexes, Mn(II)(4)(L(Et))(2)(OH)(4)(ClO(4))(4) (7), Fe(II)(4)(L(Et))(2)(F)(4)(BF(4))(4)·5/2H(2)O (8), Co(II)(4)(L(Et))(2)(F)(4)(BF(4))(4)·3H(2)O (9), Ni(II)(4)(L(Et))(2)(F)(4)(BF(4))(4)·4H(2)O (10), Cu(II)(4)(L(Et))(2)(F)(4)(BF(4))(4)·3H(2)O (11) and Zn(II)(4)(L(Et))(2)(F)(4)(BF(4))(4) (12), result. Six complexes have been structurally characterized: in all cases each L(Et) is bis-tetradentate and provides a pyrimidine bridge between two metal centres. As originally anticipated, complexes 1, 4' and 6 are dinuclear, while 9, 10 and 12 are revealed to be tetranuclear, with two M(2)(L(Et))(4+) moieties bridged by two pairs of fluoride anions. Weak to moderate antiferromagnetic coupling between the metal centres is a feature of complexes 2, 3, 4, 8, 9 and 10. The dinuclear complexes 1-6 undergo multiple, mostly irreversible, redox processes. However, the pyrimidine-based dicopper(II) complex 5 undergoes a two electron quasi-reversible reduction, Cu(II)(2)→ Cu(I)(2), and this occurs at a more positive potential [E(m) = +0.11 V (E(pc) = -0.03 and E(pa) = +0.26 V) vs. 0.01 M AgNO(3)/Ag] than for either of the dicopper(II) complexes of the analogous pyrazine-based ligands.     

Photochemistry of dithiocarbamate Cu(II) complex in CCl4

Laser pulse photolysis was used to study the nature and reactions of intermediates in the photochemistry of the flat dithiocarbamate complex Cu(Et(2)dtc)(2) in CCl(4). A nanosecond laser pulse (355 nm) is shown to induce intermediate absorption bands of bivalent copper complex whose coordination sphere contains a dithiocarbamate radical Et(2)dtc(?) and a chloride ion at the axial position ([(Et(2)dtc)Cu(Et(2)dtc(?))Cl(a)]). At room temperature during some microseconds after the laser pulse, this intermediate interacts with the initial complex to form presumably a dimer [Cu(2)(Et(2)dtc)(3)(Et(2)dtc(?))Cl]. The latter vanishes in the second-order reaction. Analysis of kinetic and spectral features gives the arguments for the formation of a cluster [Cu(2)(Et(2)dtc)(3)Cl-tds-Cu(2)(Et(2)dtc)(3)Cl], which produces a new absorption band at 345 nm. The cluster decomposes in ～5 ms into final products, a binuclear complex [Cu(2)(Et(2)dtc)(3)Cl] and tetraethylthiuramdisulfide (Et(4)tds).     

Oxidative formation of thiolesters in a model system of the pyruvate dehydrogenase complex

In the presence of a catalytic amount of 3-butyl-4-methylthiazolium bromide, the reaction of benzaldehydes with azobenzene in dichloromethane containing octanethiol and Et(3)N gave the corresponding S-octyl thiobenzoates in good yields. The thiolesters were produced by trapping of the 2-benzoylthiazolium salts with the thiol, which were generated through the azobenzene oxidation of the active aldehydes. This is the first example for the thiolester formation mimicking the function of the pyruvate dehydrogenase complex. An electron-withdrawing substituent at the 4-position of benzaldehyde enhanced the reaction rate. The effect of benzaldehyde substituents on the reaction rate was examined quantitatively on the basis of kinetic measurements, leading to a nonlinear correlation of log(k(obs)) with Hammett's substituent constants (sigma). The origin of the nonlinear Hammett plot was interpreted in terms of a shift in the rate-determining step of the multistep reaction with change of the electronic nature of substituent. Further support for this assumption was given by the observation that the reaction constant (rho) of the Hammett plot for the azobenzene substituent effect on the oxidation rate of 4-bromobenzaldehyde was much smaller than that of 4-cyanobenzaldehyde.     

Nucleophilic addition of benzenethiol to 1',2'-unsaturated nucleosides: 1'-C-phenylthio-2'-deoxynucleosides as anomeric radical precursors

The addition reaction of benzenethiol to the glycal portion of 1',2'-unsaturated uridine proceeds efficiently in the presence of Et(3)N. The mechanism involves nucleophilic attack of thiolate at the anomeric position in the rate-determining step, wherein conjugation between the nucleobase and the glycal portion is crucial. The derivative having a methyl group either at the 2'- or 6-position did not undergo this addition reaction, due to their sterically prohibited coplanarity. The 1',2'-unsaturated derivatives of thymine and adenine can also be used as substrates for this addition reaction. It was also shown that the resulting 1'-C-phenylthio-2'-deoxynucleosides serve as precursors for radical-mediated C-C bond formation at the anomeric position.     

Cyclic voltammetry study of (5-ethoxycarbonylmethylidene-4-oxothiazolidin-2-ylidene)-N-phenylethanamide

As a continuation of our ongoing project on electrochemical properties of push-pull 5-substituted 2-alkylidene-4-oxothiazolidines (1a) differing in substituent R at C5-position and electron withdrawing group (EWG), we nave investigated the electrochemical behaviour of (5-etoxycarbonylmethylidene-4-oxothiazolidin-2-ylidene)-N-phenylethanamide 1a (R: =CHCO₂Et; EWG: CONHPh), consisting as a (2E,5Z)/(2Z,5Z) mixture, by cyclic voltammetry in polar as well as non-polar solvent (0.1 M TBAHFP in DMSO and CHCl₃, respectively). Cyclic voltammetry at stationary electrode was employed to characterize the electron transfer steps. Based on electrochemical criteria and correlation with the DigiSim simulations, an ECE mechanism, involving two electrochemical steps and one isomerisation step, was suggested. The article is published in the original.     

Facile and regioselective synthesis of novel 2,4-disubstituted-5-fluoropyrimidines as potential kinase inhibitors

2,4-Disubstituted-5-fluoropyrimidine is a biologically active molecular core seen in various anticancer agents such as 5-fluorouracil (5-FU). As part of a programme aimed at discovering kinase inhibitors, routes to two series of novel compounds (5-fluoropyrimidine-2-carboxamides and 5-fluoropyrimidine-4-carboxamides) were successfully executed. For the first series, regioselective substitution at the 4-position of the pyrimidine with an amine (HNR¹R²) was achieved, followed by preparation of the amide at the 2-position. The route to the second series involved introduction of the methoxy protecting group at the 4-position, which allowed subsequent amine substitution to occur at the 2-position. The 4-amide substituent was finally introduced by direct conversion of the 4-methoxy into a 4-chloro group followed by transformation into an amide by palladium catalysis.     

Synthesis of zinc trisubstituted hydrazido complexes and ortho-metalation of 4-(dimethylamino)pyridine

The zinc hydrazide complexes [EtZn(N(SiMe(3))NMe(2))](2), [EtZn(N(Me)NMe(2))](4), and Zn(3)Et(4)(N(Et)NMe(2))(2) were synthesized by allowing excess hydrazine, HN(R)NMe(2), to react with diethyl zinc. The product of the reaction between ZnEt(2) and HN(i-Pr)NMe(2)ortho-metalated 4-(dimethylamino)pyridine (DMAP) at room temperature, producing the complex Zn[(NC(5)H(3)-p-NMe(2))ZnEt(N(i-Pr)NMe(2))](2). At elevated temperatures, Zn(3)Et(4)(N(Et)NMe(2))(2) also ortho-metalated DMAP, but [EtZn(N(Me)NMe(2))](4) did not. Single-crystal X-ray diffraction studies revealed that the hydrazide ligands in [EtZn(N(SiMe(3))NMe(2))](2) act as bridging mono-hapto amide ligands, and in Zn(3)Et(4)(N(Et)NMe(2))(2) and Zn[(NC(5)H(3)-p-NMe(2))ZnEt(N(i-Pr)NMe(2))](2) the hydrazide ligands are di-hapto.     

Bimetallic anilido-aldimine zinc complexes for epoxide/CO2 copolymerization

Acyclic o-phenylene-bridged bis(anilido-aldimine) compounds, o-C(6)H(4){C(6)H(2)R(2)N=CH-C(6)H(4)-(H)N(C(6)H(3)R'(2))}(2) and related 30-membered macrocyclic compounds, o-C(6)H(4){C(6)H(2)R'(2)N=CH-C(6)H(4)-(H)N-C(6)H(2)R(2)}(2) (o-C(6)H(4)) are prepared. Successive additions of Me(2)Zn and SO(2) gas to the bis(anilido-aldimine) compounds afford quantitatively dinuclear mu-methylsulfinato zinc complexes, o-C(6)H(4){(C(6)H(2)R(2)N=CH-C(6)H(4)-N(C(6)H(3)R'(2))-kappa(2)-N,N)Zn(mu-OS(O)Me)}(2) (R = iPr and R' = iPr, 29; R = Et and R' = Et, 30; R = Me and R'= Me, 31; R = Me and R' = iPr, 32; R = Et and R' = Me, 33; R = Et and R' = iPr, 34; R = iPr and R' = Et, 35) and o-C(6)H(4){C(6)H(2)R'(2)N=CH-C(6)H(4)-N-C(6)H(2)R(2)-kappa(2)-N,N)Zn(mu-OS(O)Me)}(2) (o-C(6)H(4)) (R = Et and R'= Et, 36; R = Me and R' = Me, 37; R = iPr and R' = Me, 38; R = Et and R' = Me, 39; R = Me and R'= iPr, 40). Molecular structures of 34 and 40 are confirmed by X-ray crystallography. Complexes 30-35 show high activity for cyclohexene oxide/CO(2) copolymerization at low [Zn]/[monomer] ratio (1:5600), whereas the complex of mononucleating beta-diketiminate {[(C(6)H(3)Et(2))N=C(Me)CH=C(Me)N(C(6)H(3)Et(2))]Zn(mu-OS(O)Et)}(2) shows negligible activity in the same condition. Activity is sensitive to the N-aryl ortho substituents and the highest activity is observed with 32. Turnover number up to 2980 and molecular weight (M(n)) up to 284 000 are attained with 32 at such a highly diluted condition as [Zn]/[monomer] = 1:17 400. Macrocyclic complexes 36-40 show negligible activity for copolymerization.     

含烯烃配体的过渡金属卡宾配合物的研究V:新型异构化的环己二烯(二羰基)[乙氧基(芳基)卡宾]铁配合物的合成和结构

报导了用含环状共轭双烯配体的1,3-环己二烯三羰基铁(1)与芳基锂在低温下的反应,并用Et3OBF4烷基化,以观察环烯烃配体的反应活性及其对卡宾配合物异构化的影响.并研究不同烯烃配体和芳烃取代基对产物的影响.     

Synthesis, structure and host-guest properties of (Et4N)2[Sn(IV)Ca(II)(chloranilate)4], a new type of robust microporous coordination polymer with a 2D square grid structure

Reaction of chloranilic acid with SnCl(4), Ca(NO(3))(2) and Et(4)NBF(4) in aqueous acetone yields (Et(4)N)(2)[Sn(IV)Ca(II)(can)(4)]. 2 Me(2)CO which contains 2D coordination polymer sheets of composition [Sn(IV)Ca(II)(can)(4)](2-). Both metals are 8-coordinate and act as 4-connecting nodes to form a square grid containing "square" holes. The anionic sheets are electrostatically bound together by Et(4)N(+) cations, which align the sheets so that holes are arranged directly above and below each other, generating channels perpendicular to the sheets. The acetone is easily removed, after which single crystal character is retained. Crystallographic studies indicate that (Et(4)N)(2)[Sn(IV)Ca(II)(can)(4)] is able to sorb one molecule per square hole of either acetonitrile, or CS(2). Gas sorption measurements indicate that at a pressure of 2000 kPa each square cavity sorbs two CO(2) molecules at 273 K, approximately one molecule of N(2) at 195 K and approximately 2.4 molecules of H(2) at 77 K.     

High selectivity from configurational match/mismatch in carbon-hydrogen insertion reactions of steroidal diazoacetates catalyzed by chiral dirhodium(II) carboxamidates.

Diazo decomposition of steroidal diazoacetates, where the point of attachment is the 3-position of the steroid A-ring, catalyzed by chiral dirhodium(II) carboxamidates results in products from carbon-hydrogen insertion in high yield and selectivities. Use of S-configured catalysts shows a distinctive preference for insertion into the 3-position to form beta-lactone products. The R-configured catalysts direct insertion preferentially to the equatorial C-H bond at the 2-position. Substituents or functional groups at the 5/6-position prevent C-H insertion from taking place at the 4-position. Even in the best case with the 5/6-positions fully saturated, however, insertion into the 3-position remains competitive with insertion into the 4-position. Corresponding 3-substituted phenyldiazoacetates give only beta-lactone products, and selectivity here is highest with chiral dirhodium(II) prolinate catalysts. A model is presented to explain these results. Overall, this methodology is versatile for functionalization of the steroid A-ring at positions 2 and 3.     

A 1D Schiff base zinc polymer as a versatile metallo-ligand for the synthesis of polynuclear zinc cages

The 1D polymeric Schiff base zinc complex, [LZn(2)Et(2)](n), where LH(2) = (NN'-ethylene-bis(4-iminopentan-2-one)) has been demonstrated as a useful synthetic metallo building block for the synthesis of homo and heteronuclear zinc cages. The reaction of [LZn(2)Et(2)](n) with CdI(2) afforded the hetero-nuclear cage, 1, [L(2)Zn(4)(Et)(2)CdI(4)], while reaction with HgI(2) afforded a hexanuclear zinc cage, [L(2)Zn(6)(Et)(4)(μ(4)O)(μ(3)OEt)I], 2. The versatility of [LZn(2)Et(2)](n) as a metallo building block is demonstrated through the reaction with ferrocenyl carboxylic acid, affording the ferrocenyl supported zinc cage, [L(2)Zn(8)(FcCO(2))(4)(Et)(2)(OEt)(2)(μ(4)O)(2)], 3, while the reaction with Er(III) acetate afforded the decanuclear zinc cage, [L(3)Zn(10)(μ(4)O)(4)(Et)(6)], 4.     

Stoichiometric and catalytic secondary O-atom transfer by Fe(III)-NO2 complexes derived from a planar tetradentate non-heme ligand: reminiscence of heme chemistry

An Fe(III) nitro complex [(bpb)Fe(NO2)(py)] (2) of the tetradentate ligand 1,2-bis(pyridine-2-carboxamido)benzene (H2bpb, H is the dissociable amide proton) has been synthesized via addition of NaNO2 to [(bpb)Fe(py)2](ClO4) (1) in MeCN or DMF. This structurally characterized Fe(III) nitro complex exhibits its nuNO2 at 1384 cm(-1). The reaction of 1 with 2 equiv of Et4NX (X = Cl-, Br-) affords the high-spin complexes (Et4N)[(bpb)Fe(Cl2)] (3) and (Et4N)[(bpb)Fe(Br)2] (4), respectively. The structure of 4 has been determined. The addition of an equimolar amount of Et4NCl, Et4NBr, or Et4NCN to a solution of 2 affords the mixed-ligand complexes (Et4N)[(bpb)Fe(NO2)(Cl)] (5), (Et4N)[(bpb)Fe(NO2)(Br)] (6), and (Et4N)[(bpb)Fe(NO2)(CN)] (7), respectively. These complexes are all low spin with isotropic g values of 2.15. Under anaerobic conditions, the reactions of 5-7 with Ph3P in MeCN afford the five-coordinate {Fe-NO}7 nitrosyl [(bpb)Fe(NO)] (and Ph3PO) via secondary oxygen-atom (O-atom) transfer. The O-atom transfer to Ph3P by 5-7 becomes catalytic in the presence of dioxygen with transfer rates in the range of 1.70-13.59 x 10-3 min(-1). The O-atom transfer rates and turnover numbers (5 > 6 > 7) are reflective of the strength of the axial donors (Cl- > Br- > CN-). The catalytic efficiencies of complexes 5-7 are limited due to formation of the thermodynamic end products [(bpb)Fe(X)2]- (where X = Cl- for 5, Br- for 6, and CN- for 7).     

Tuning the size of supramolecular M4L4 tetrahedra by ligand connectivity

Triangular triscatechol ligands are prepared in facile reaction sequences. The catechol units are either bound to the triangular backbone through their 3- or 4-position. With titanium(IV) ions, the ligands form metallosupramolecular M(4)L(4) tetrahedra which are characterized by ESI MS and proton NMR. Quantum-chemical calculations reveal that connectivity at the catechol in the 3-position results in highly condensed structures while attachment in the 4-position affords container molecules providing huge internal cavities.     

Funktionalisierte Alkinkomplexe von Wolfram(VI). Synthese und Kristallstrukturen von [WCl4(Et?Se?CC?Se?Et)(THF)] und [WCl4(Et?Te?CC?Te?Et)(THF)]

Functionalized Alkyne Complexes of Tungsten(VI). Syntheses and Crystal Structures of [WCl₄(Et? Se? C?C? Se? Et)(THF)] and [WCl₄(Et? Te? C?C? Te? Et)(THF)] The title compounds have been prepared by reactions of [WCl₄(SEt₂)₂] with the alkynes Et? X? C?C? X? Et (X = Se, Te) in CCl₄ solution and subsequent addition of tetrahydrofurane. Both complexes were characterized by crystal structure determinations. [WCl₄(Et? Se? C?C? Se? Et)(THF)]: Space group P2₁/n, Z = 4, structure determination with 2942 unique reflections, R = 0.038. Lattice dimensions at 20°C: a = 934.2, b = 1639.5, c = 1189.5 pm, β = 96.497°. [WCl₄(Et? Te? C?C? Te? Et)(THF)]: Space group P2₁/n, Z = 4, structure determination with 4097 unique reflections, R = 0.067, Lattice dimensions at ?70°C: a = 899.2, b = 1691.9, c = 1213.3 pm, β = 96.82°. The complexes have monomeric molecular structures with the oxygen atom of the THF molecules in trans-position to the side-on bound alkyne ligands.     

Syntheses and characterizations of cluster compounds with MoFe3Se4 cubane-like core

The reaction system of [Et4N]2MoSe4, FeCI2 and R2NCS2Na in DMF-CH3CN at ambient temperature yielded the Mo-Fe-Se cluster compounds MoFe3Se4(μ-R2NCS2)2(R2NCS2)4 (R2=Me2(1), Et2(2), C4H8(3)) with MoFe3Se4 core. X-ray diffraction analyses of 2 revealed that the molecular structure contains a distorted cubane like M4Se4 core with two bridged and four chelated Et2NCS2- ligands. The cyclic voltammetric studies of the compounds showed the reversible mul-tielectron-transfer sequence.