Analysis of pyridoquinoline derivatives by liquid chromatography/atmospheric pressure chemical ionization mass spectrometry

A method using liquid chromatography/atmospheric pressure chemical ionization mass spectrometry (LC/APCI-MS) has been developed for the characterization and determination of pyridoquinoline derivatives 4,6-bis(dimethylaminoethylamino)-2,8,10-trimethylpyrido[3,2-g]quinoline, 4,6-bis(dimethylaminoethoxy)-2,8,10-trimethylpyrido[3,2-g]quinoline and 4,6-bis[(dimethylaminoethyl)thio]-2,8,10-trimethylpyrido[3,2-g] quinoline, all with potential antitumor properties. LC separation was performed on a conventional C18 column using a binary mobile phase composed of acetonitrile and 50 mM aqueous ammonium formate at pH 3. The APCI mass spectra obtained showed that proton addition giving [M + H]+ was the common mode of ionization to the amino- and thiopyridoquinolines, whereas the alkoxypyridoquinoline was identified by the main formation of the [M - (C2H3)N(CH3)2 + H]+, followed by the [M + H]+ ion. The LC separation conditions and MS detection parameters were optimized for the determination. The analytical method was also applied to the determination of these pyridoquinoline derivatives in fetal calf serum using liquid-liquid extraction with dichloromethane. Acceptable recovery values were obtained, ranging between 45 and 98%.     

Determination of metal ions by on-line complexation and ion-pair chromatography

An ion-pair chromatographic method utilizing on-line complexation and ion-pair formation in a post-column reactor was developed for the determination of copper, palladium, cobalt and iron in mixtures. The system features a reversed-phase column and a second eluent line feeding the ligand reagent, connected after the column via a T-piece, to a mixer and through that to a knitted tubing reactor. The ion-pair former was added to the eluent before the column and the ligand after it. The separation was studied using a binary eluent system containing cetyltrimethylammonium bromide (CTMABr) or tetradecyltrimethylammonium bromide (TDTMABr) in water-methanol (99:1, v/v) as ion-pair former and methanol. In addition, water-methanol (99:1, v/v) containing 1-nitroso-2-naphthol-6-sulphonate (126NNS) as ligand was added to the eluent, through the T-piece, after the column. Mixing of the two eluents took place in the mixer. Methanol was used both isocratically and in gradient addition. Selective UV-VIS detection of the metal-126NNS ion pairs was at wavelengths 230, 260, 310 and 400 nm and their identification was effected in wavelength range 190–600 nm. The metal complex formation in the aqueous methanol eluent evidently governed the retention of the ion pairs, while the selectivity of the method was provided by the different rates of reaction of the metal, the ligand and the ion-pair former in the mixer-reactor system. The detector response for copper, palladium, cobalt and iron was linear up to concentrations of 10 μM. In spiked water-methanol samples the detection limits for these metals ranged from 1·10⁻³ to 1 mg/l. When the on-line complexation and ion-pair formation method was tested with nickel, mercury and zinc, the results proved that these ion pairs were unstable. Because of the insufficient reproducibility of the absorption intensities of these metal ion pairs, their qualitative study could be performed only in the pH range 7–8. The method was successfully applied to real samples after removal of the organic material.     

Liquid chromatography/atmospheric pressure chemical ionization-mass spectrometric analysis of benzoylurea insecticides in citrus fruits

A liquid chromatography (LC) method for the quantitative determination of three benzoylurea insecticide residues (diflubenzuron, flufenoxuron and hexaflumuron) in citrus fruits is described. Residues were successfully separated on a C18 column by methanol/water gradient elution. Detection was by negative-ion, selected-ion monitoring atmospheric pressure chemical ionization-mass spectrometry (APCI-MS); the main ions were [M - H]-, and the secondary fragment ions were [M - H - HF]-. Useful confirmatory information can thus be obtained at low extraction voltages from losses of HF. Detection limits for standard solutions were 10 fg injected and good linearity and reproducibility were obtained. The optimum LC/APCI-MS conditions were applied to the analysis of benzoylureas in oranges. Samples were extracted using matrix solid phase dispersion (MSPD), in which orange samples were homogenized with Cs, placed onto a glass column and eluted with dichloromethane. Detection limits of 2 microg kg(-1) in the crop were obtained. Average recoveries from citrus fortified with approximately (25-1000 microg kg(-1)) ranged from 87 to 102%. The method was applied to field-treated orange samples and benzoylureas were sometimes detected at concentration levels lower than maximum residue limits.     

Characterization and determination of linear alkylbenzenesulfonates in environmental water samples by high-performance liquid chromatography with a hydrophilic polymer column and electrospray ionization mass spectrometric detection.

A liquid chromatography-mass spectrometry (LC/MS) method was developed for the separation and determination of linear alkylbenzenesulfonates (C10-C14 LAS) in environmental water samples using a hydrophilic polymer column (Shodex Mspak GF-310 4D). This method involves a solid-phase extraction of the LAS samples with a Sep-Pak PS-2 cartridge. The LAS components were separated on the column with a mobile phase of 29% (w/v) acetonitrile-water containing 0.8 mM di-n-butylammonium acetate and 0.2 M acetic acid, and were detected by mass spectrometry with electrospray ionization. Detection limits of the developed method based on selected ion monitoring (SIM) technique for the C10-C14 LAS standards were 13-47 ng L(-1). The concentrations of the C10-C14 LAS in the environmental water samples ranged between 5-317 microg L(-1) for a river water sample and 0.4-6.4 microg L(-1) for a seawater sample. Linear relationships between the logarithms of retention factors and the alkyl chain lengths for each phenyl positional isomer of LAS could successfully be used for the identification of the isomer peaks.     

Liquid Chromatographic Determination of Cationic Surfactants in Environmental Samples using a Continuous Post-Column Ion-Pair Extraction Detector with a Sandwich Phase Separator

Abstract

A new detection technique is described for the quantitative analysis of cationic surfactants by HPLC via post-column ion-pair formation. A new sandwich type phase separator, as part of the extraction detector, was successfully introduced. The method was used to determine ditallowdimethylammonium chloride (DTDMAC) in various environmental samples. Detection limits of DTDMAC in river water were about 2 μg/1 (60 ng absolute; S/N = 5) and 10 ng/1 (260 pg absolute; S/N = 5), using methyl orange and 9,10-dimethoxyanthracene-2-sulphonate (DAS) as ion-pairing reagents, respectively. The environmental concentration of DTDMAC found on random samples from two Belgian rivers range from 30 to 40 μg/1. The reproducibility of the determination of DTDMAC in river water was 4.2% (RSD) (n = 20).     

Liquid chromatography with electrospray ion-trap mass spectrometry for the determination of yessotoxins in shellfish

Yessotoxins are a group of large polyether toxins, produced by marine dinoflagellates, which cause widespread contamination of filter-feeding shellfish. A new, sensitive liquid chromatography-mass spectrometry (LC-MS) method has been developed for the determination of yessotoxin (YTX) and 45-hydroxy-yessotoxin (45-OHYTX), a major metabolite in shellfish. The LC system was coupled, via an electrospray ionisation (ESI) source, to an ion-trap MS in negative mode. The molecular related ion species at m/z 1141 [M-2Na+H]- was used as the parent ion for multiple MS experiments. MS-MS and MS3 gave major fragment ions at m/z 1061 [1141-SO3H]- and m/z 945 [1061-C9H12O]-. Predominant ions, that are due to the fragmentation of the backbone structure of YTXs, were observed at the MS4 stage. Reversed-phase LC using a C16 amide column was preferable to C18 phases for the separation of YTX and 45-OHYTX. Optimum calibration and reproducibility data were obtained for YTX using LC-MS-MS; r 2=0.9960, RSD < or = 6.3% at 0.25 microg YTX/g (n=5). The detection limit (S/N=3) was 30 pg YTX on-column which corresponded to 3 ng/g shellfish tissue.     

Interactions of Pb2+ with fulvic acid by electrophoretically mediated on-capillary microanalysis

Studies of yessotoxin involving confirmation of fragmentation processes using a high-resolution orthogonal hybrid quadrupole time-of-flight (QqTOF) mass spectrometer and nanoLC hybrid quadrupole TOF MS have been undertaken. The fragmentation of YTX was studied in negative mode using nano electrospray (nanoESI) QqTOF mass spectrometry. Three major molecule-related ions were observed, [M - 2Na + H]-, [M - Na]- and [M - 2Na]2-, and fragmentation of the latter was studied in detail. This showed that product ions were formed as a consequence of charge-remote fragmentation processes that included a strong directional cleavage of the polyether rings of YTX. NanoLC coupled with QqTOF MS was used to determine YTX in small samples of the phytoplankton, Protoceratium reticulatum, by monitoring the [M - 2Na]2- ion at m/z 570. A PepMap C18 nanoLC column (75 microm x 10 cm, 100 A, 3 microm, LC Packings) was used and the solvent was acetonitrile/water (90:10 (v/v)) containing 1 mM ammonium acetate, at a flow rate of 400 nl/min, for 30 min. Calibrations obtained with YTX standard solutions were linear over four orders of magnitude, 0.75-250 ng/ml; r2 = 0.9947-0.9998. Phytoplankton cells (ca. 100-300) were picked, extracted with methanol/water (40:60), and the YTX concentration was determined over the range 0.011-0.020 ng/cell. The detection limit (3 x S/N) of this method was ca. 0.5 pg YTX on-column.     

Liquid chromatography with electrospray ion-trap mass spectrometry for the determination of anatoxins in cyanobacteria and drinking water

Anatoxin-a (AN) and homoanatoxin-a (HMAN) are potent neurotoxins produced by a number of cyanobacterial species. A new, sensitive liquid chromatography/multiple tandem mass spectrometry (LC/MS(n)) method has been developed for the determination of these neurotoxins. The LC system was coupled, via an electrospray ionisation (ESI) source, to an ion-trap mass spectrometer in positive ion mode. The [M+H](+) ions at m/z 166 (anatoxin-a) and m/z 180 (homoanatoxin-a) were used as the precursor ions for multiple MS experiments. MS(2)bond;MS(4) spectra displayed major fragment ions at m/z 149 (AN), 163 (HMAN), assigned to [Mbond;NH(3)+H](+); m/z 131 (AN), 145 (HMAN), assigned to [Mbond;NH(3)bond;H(2)O+H](+), and m/z 91 [C(7)H(7)](+). Although the chromatographic separation of these neurotoxins is problematic, reversed-phase LC, using a C(18) Luna column, proved successful. Calibration data for anatoxin-a using spiked water samples (10 mL) in LC/MS(n) modes were: LC/MS (25-1000 microg/L), r(2) = 0.998; LC/MS(2) (5-1000(microg/L), r(2) = 0.9993; LC/MS(3) (2.5-1000 microg/L), r(2) = 0.9997. Reproducibility data (% RSD, N = 3) for each LC/MS(n) mode ranged between 2.0 at 500 microg/L and 7.0 at 10 microg/L. The detection limit (S/N = 3) for AN was better than 0.03 ng (on-column) for LC/MS(3) which corresponded to 0.6 microg/L.     

Determination of inorganic arsenic(III) and arsenic(V) in water samples by ion chromatography/inductively coupled plasma-mass spectrometry

A method was validated for the direct determination of As(III) and As(V) in water samples by ion chromatography/inductively coupled plasma-mass spectrometry. Sample preservation required only dilution with a mobile phase containing a sufficient amount of ethylenediaminetetraacetic acid and acetic acid. Analyses of 6 certified reference materials (CRMs) of various water matrixes, including seawater, demonstrated good method accuracy. The matrixes included 2 natural water samples [National Institute of Standards and Technology Standard Reference Material (NIST SRM) 1643e and NIST SRM 1640], 1 fortified standard solution (TMDA-64), 1 fortified water sample (TM-DWS), and 2 seawater samples (CASS-4 and NASS-5). The sum of As(III) and As(V) in each CRM agreed with the respective certified value for the total amount of As within its stated uncertainty. Quantitative recoveries (96.7-102.1%) were obtained. Satisfactory results were achieved for intraday repeatability [relative standard deviation (RSD = 0.3-5.1%] and interday precision (RSD = 0.7-4.1%). In the study of fortified blanks and fortified CRMs, quantitative recoveries of As(III) and As(V) (92.5-102.6%) were obtained. Interconversion of As(III) and As(V) was not observed under the conditions of sample preservation. International comparability of analytical results was demonstrated by the analysis of 2 interlaboratory proficiency test samples, NY7011 and NY8511, from the New York State Department of Health.     

Sensitive high-performance liquid chromatographic determination of ionic drugs in biological fluids with short-wavelength ultraviolet detection using column switching combined with ion-pair chromatography: application to basic compounds

A highly sensitive and selective high-performance liquid chromatographic method with short-wavelength UV detection is described for the determination of ionic compounds in biological fluids, which was applied to two basic compounds, 2-(3-[4-(4-fluorophenyl)-1-piperazinyl]propyl)-6,7,8,9-tetrahydro-2H-nap htho [2,3-b][1,4]oxazin-3(4H)-one (I) and methyl 2-(4-diphenylmethyl-1-piperazinyl)ethyl (+/-)-1,4-dihydro-2,6-dimethyl-4-(m-nitrophenyl)-3,5-pyridinedicarboxyla te (II), in human serum. The method is based on the combination of the column-switching technique and ion-pair chromatography. In the first ODS column, the analyte is pre-separated from endogenous substances in serum by ion-pair chromatography. After column switching, in the second ODS column the heart-cut fraction containing the analyte is further separated by non-ion-pair chromatography from coeluted endogenous substances from the first ODS column. The proposed method offered high sensitivity and selectivity with UV detection at 215 nm for I and 230 nm for II. The detection limits were 0.2 ng/ml for both I and II using 1 ml of serum. The principle of the proposed method would be applicable to both acidic and basic compounds in biological fluids with a suitable ion-pair reagent.     

Hydrophilic interaction liquid chromatography/tandem mass spectrometry for the analysis of diallyldimethylammonium chloride in water

We report a selective, sensitive and fast liquid chromatography/tandem mass spectrometry (LC/MS/MS) method for the determination of diallyldimethylammonium chloride (DADMAC) in water. Hydrophilic interaction liquid chromatography (HILIC) was used to avoid ion-pairing reagents, which are generally employed to retain cationic compounds. The complementary information obtained in a triple quadrupole mass spectrometer and in an ion trap Orbitrap has been used to study the fragmentation of the DADMAC cation [M](+) and for the correct assignment of the products ions. The HILIC/MS/MS method developed, using electrospray ionization in positive ion mode and selected reaction monitoring (SRM) acquisition mode, led to a reliable determination and confirmation of the DADMAC cation in water samples down to 50 ng L(-1). The low detection limit achieved, in combination with the absence of matrix effects, allowed the direct analysis of samples without any pretreatment, preconcentration or clean-up step. DADMAC was determined in samples collected in a drinking water treatment plant (DWTP) in Barcelona (Spain) and it was found in the influent at the μg L(-1) level.     

Determination of 1-aminocyclopropane-1-carboxylic acid and its structural analogue by liquid chromatography and ion spray tandem mass spectrometry

Liquid chromatography coupled to ion spray tandem mass spectrometry was developed as a method for the simultaneous analysis of the amino acid 1-aminocyclopropane-1-carboxylic acid (ACC) and its structural analogue, cyclopropane-1,1-dicarboxylic acid (CDA). ACC and CDA fragmentation as well as optimization of MS parameters were investigated in positive ion mode. In selective reaction monitoring mode the protonated molecule [M+H]+ was selected as parent ion for both ACC and CDA, while the immonium ion from ACC and the [M+H-H2O]+ ion from CDA were selected, respectively, as product ions. In spite of the high selectivity of MS/MS among the 20 protein amino acids potentially present with ACC and CDA in the plant material analyzed, Glu and Thr can interfere with the signal of ACC. As a result, their chromatographic separation is necessary. This was achieved in less than 4 min by ion-pair reversed-phase chromatography with nonafluoropentanoic acid as ion-pair reagent. A linear response within a concentration range of 1-5 mg l(-1) was observed for this LC method and the detection limit was found to be 20 pmol for ACC and 150 pmol for CDA (using a 20-microl loop). This methodology was successfully applied to the detection of ACC in apple tissue.     

Clusters of hydrated methane sulfonic acid CH3SO3H.(H2O)n (n = 1-5): a theoretical study

Ab initio and density functional methods have been used to examine the structures and energetics of the hydrated clusters of methane sulfonic acid (MSA), CH3SO3H.(H2O)n (n = 1-5). For small clusters with one or two water molecules, the most stable clusters have strong cyclic hydrogen bonds between the proton of OH group in MSA and the water molecules. With three or more water molecules, the proton transfer from MSA to water becomes possible, forming ion-pair structures between CH3SO3- and H3O+ moieties. For MSA.(H2O)3, the energy difference between the most stable ion pair and neutral structures are less than 1 kJ/mol, thus coexistence of neutral and ion-pair isomers are expected. For larger clusters with four and five water molecules, the ion-pair isomers are more stable (>10 kJ/mol) than the neutral ones; thus, proton transfer takes place. The ion-pair clusters can have direct hydrogen bond between CH3SO3- and H3O+ or indirect one through water molecule. For MSA.(H2O)5, the energy difference between ion pairs with direct and indirect hydrogen bonds are less than 1 kJ/mol; namely, the charge separation and acid ionization is energetically possible. The calculated IR spectra of stable isomers of MSA.(H2O)n clusters clearly demonstrate the significant red shift of OH stretching of MSA and hydrogen-bonded OH stretching of water molecules as the size of cluster increases.     

Evaluation of eluents in thermospray liquid chromatography-mass spectrometry for identification and determination of pesticides in environmental samples.

The influence of different eluents in positive and negative ion mode thermospray liquid chromatography-mass spectrometry was studied with several groups of pesticides, including carbamates, chlorotriazines, phenylureas, phenoxy acids and organophosphorus and quaternary ammonium compounds, and the corresponding degradation products. Using the positive ion mode in combination with reversed-phase eluents the base peaks generally corresponded either to [M + H]+ for the chlorotriazines and their hydroxy metabolites or to [M + NH4]+ for the carbamates, the phenylureas, the organophosphorus pesticides and their oxygen analogues. In the negative ion mode different processes such as (dissociative) electron-capture and anion attachment mechanisms occurred. Fragment ions such as [M - CONHCH3]- for the carbamates, [M - H]- for the chlorotriazines, phenylureas and chlorinated phenoxy acids and [M].-, [M - R]- (R being a methyl or ethyl group) for organophosphorus pesticides were usually formed. Depending on the eluent additive used (ammonium acetate, ammonium formate and/or chloroacetonitrile), three different adduct ions were formed: [M + CH3COO]-, [M + HCOO]- and [M + Cl]-. Normal-phase eluents with cyclohexane, n-hexane and/or dichloromethane provided more structural information and enhanced the response of several compounds. The positive ion mode was useful for the detection of chlorinated phenoxy acids and chlorophenols which could not be detected in the positive ion mode using reversed-phase systems. The base peaks generally corresponded to [M].+, [M + H]+ or [M - Cl]+. For the characterization of difenzoquat, a quaternary ammonium pesticide of which trace level analysis is troublesome, a post-column ion-pair extraction system was used. An aqueous mobile phase with a sulphonate-type counter ion was applied and an extraction solvent containing cyclohexane-dichloromethane-n-butanol (45:45:10) was used in thermospray liquid chromatography-mass spectrometry. Illustrative examples of the determination of residue levels of pesticides in soil matrices are shown.     

Negative ion electrospray and tandem mass spectrometric analysis of platelet activating factor (PAF) (1-hexadecyl-2-acetyl-glycerophosphocholine)

The analysis of 1-hexadecyl-2-acetyl-glycerophosphocholine (platelet activating factor, PAF) by negative ion and normal-phase liquid chromatography/tandem mass spectrometry (LC/MS/MS) was investigated as an alternative technique to the currently used gas chromatography/MS and positive ion LC/MS/MS procedures. The positive ion [M + H]+ derived from PAF and generated by electrospray ionization is abundant, but the potential presence of isobaric 1-octadecanoyl-2-lyso-glycerophosphocholine (stearoyl-lyso-GPC) and 1-hexadecanoyl-2-formyl-glycerophosphocholine (PFPC) in biological samples limits the use of the most abundant collision-induced decomposition (CID) transition (formation of the phosphocholine ion, m/z 524-->184) if chromatographic separation is not achieved. Less abundant CID product ions, such as loss of the neutral ketene molecule derived from the respective fatty acyl groups, provide the requisite specificity, but the intensity of these transitions yields a signal-to-noise ratio that greatly diminishes the analytical sensitivity. With negative ion LC/MS/MS, however, the molecular anions [M - 15]- derived from PAF, stearoyl-lyso-GPC and PFPC decompose to the carboxylate anions at m/z 59, 283 and 255, respectively, permitting discrimination of these isobaric molecules even without chromatographic separation. In addition, the CID of [M - 15]- was favorable, yielding ion currents of sufficient intensity to permit the measurement of PAF when isolated from small quantities of biological material. With the use of a stable isotopically labeled variant of PAF and isotope dilution, negative ion LC/MS/MS was found to measure PAF reliably even in the presence of the isobaric stearoyl-lyso-GPC and permitted the use of non-chlorinated mobile phases for normal-phase high-performance LC.     

Determination of amines as pentafluoropropionic acid anhydride derivatives in biological samples using liquid chromatography and tandem mass spectrometry

Determination of amines in biological samples as markers of exposure to the amines or the corresponding isocyanates is an important tool for industrial exposure assessment. In this study, a liquid chromatography and tandem mass spectrometry (LC-MS/MS) method for determination of amines in biological samples as perfluorofatty amides derivatives is presented. The method enables determination of diamines such as methylene diamine (MDA), toluene diamine (TDA), naphthalene diamine (NDA), hexamethylene diamine (HDA), isophorone diamine (IPDA), methylenedi(cyclohexylamine)(HMDA) and 4,4'-methylene-(2-chloroaniline)(MOCA) in human urine and plasma. The work-up procedure included hydrolysis of the biological samples with 3 M H(2)SO(4) at 100 degrees C for 16 h and extraction of the amines into toluene, where derivatisation of the amines with perfluorofatty acid anhydride was performed. Following removal of excess reagent and the acid formed and an exchange of solvent, the derivatives were analysed using gradient elution with an acetonitrile/water mobile phase composition and electrospray ionisation (ESI) with multiple reaction monitoring (MRM) of [M - H](-)-->[M - H - 120](-) or [119](-). Several perfluorofatty acid anhydrides were evaluated as derivatisation reagents, but the LC chromatographic properties of the pentafluoropropionic acid anhydride (PFPA) derivatives were favourable. Quantification of amine-PFPA derivatives was performed using deuterium labelled amine-PFPA derivatives as internals standards with good precision and linearity in the investigated range of 0-20 ng ml(-1) urine. The instrumental detection limits for the amine-PFPA derivatives were 0.2-3 fmol for MRM of [M - H](-)-->[119](-) and 0.3-8 fmol for [M - H](-)-->[M - H - 120](-). In 10 urine and 6 plasma samples from workers exposed to isocyanates, determination of TDA and MDA as PFPA derivatives was performed using LC-MS/MS and a reference GC-MS method. No significant difference between the two methods was observed.     

Accurate mass and nuclear magnetic resonance identification of bisphenolic can coating migrants and their interference with liquid chromatography/tandem mass spectrometric analysis of bisphenol A

Two unknown compounds were previously determined to be potential interferences in liquid chromatography/tandem mass spectrometry (LC/MS/MS) analysis of bisphenol A (BPA) in canned infant formula. Both yielded two identical MS/MS transitions to BPA. The identities of the unknowns were investigated using accurate mass LC/MS, LC/MS/MS, and elemental formula and structures proposed. Exact identities were confirmed through purification or synthesis followed by (1)H and (13)C nuclear magnetic resonance (NMR) experiments, as well as comparisons of one unknown with commercial standards. Comparisons of negative ion electrospray ionization (ESI) MS/MS and accurate mass spectra suggested both unknowns to be structurally identical (to BPA and each other). Positive ion ESI spectra confirmed both were larger molecules, suggesting that in the negative mode they likely fragmented to the deprotonated BPA ion in the source [corrected]. Elemental composition of positive ion accurate mass spectra and NMR analysis concluded the unknowns were oxidized forms of the known epoxy can coating monomer, bisphenol A diglycidyl ether (BADGE). One of the unknowns, 2,2-[bis-4-(2,3-dihydroxypropoxy)phenyl]propane, commonly known as BADGE*2H(2)O, is widely reported as an epoxy-phenolic can coating migrant, but has not been suggested to interfere with the MS/MS analysis of BPA. The other unknown, 2-[4-(2,3-dihydroxypropoxy)phenyl]-2-[4'-hydroxyphenyl]propane, or the oxidized form of bisphenol A monoglycidyl ether (BAMGE*H(2)O), has not been previously reported in food or packaging.     

Onboard determination of submicromolar nitrate in seawater by anion-exchange chromatography with lithium chloride eluent.

Ion-exchange chromatography using a high-capacity anion exchanger with UV detection was applied to the determination of nitrate in seawater. Major ions in seawater samples did not affect the peak shape and the retention time of the nitrate when an alkaline metal cation-chloride solution was used as an eluent at high concentrations (0.5-2 mol/l). At a wavelength of 220 nm, the peak of bromide was very small because of low absorption, while its separation from the nitrate peak was good at high concentrations. Among the eluents tested, lithium chloride gave the best separation of nitrate from bromide. It was estimated that the lithium ion had the least potential for ion-pair formation with nitrate, and its retention time was prolonged compared with the retention times when using other cations; with bromide and nitrite, such an effect was not observed. The results of shipboard seawater nitrate determination by our method in the South Pacific Ocean and Antarctic Sea showed good agreement with those by the conventional photometric method using continuous flow.     

Analysis of 8-aminonaphthalene-1,3,6-trisulfonate-derivatized oligosaccharides by capillary electrophoresis-electrospray ionization quadrupole ion trap mass spectrometry.

Dextran was partially hydrolyzed with 0.1 mol/l HCl and the hydrolysate was derivatized with 8-aminonaphthalene-1,3,6-trisulfonate (ANTS) by reductive amination. The derivatized-oligosaccharide mixture was separated by capillary electrophoresis (CE) in a buffer of 1% HAc-NH4OH, pH 3.4, and the separated components were detected on-line by electrospray ionization quadrupole ion trap mass spectrometry (ESI-QIT-MS) in the negative ion mode. A mass accuracy lower than 0.01% could be achieved and as low as 1.6 pmol of detxran octaose could be detected. ANTS-derivatized dextran oligosaccharide with a degree of polymerization (DP) lower than 6 produced both [M-H]- and [M-2H]2- ions, whereas those with a DP of 6 or higher than 6 produced only [M-2H]2- ion. As 1< or =DP< or =6, the percentage of [M-2H]2- ion in the total ions of [M-H]- and [M-2H]2- was found to be a linear function of the logarithmic DP. Molecular mass determination with ESI-QIT-MS strengthens the power of CE analysis of oligosaccharides.