树枝化聚合物的合成、结构表征及其应用

本文综述了由树枝状大分子和线形聚合物结合而形成的一类新型树形聚合物--树枝化聚合物的研究进展,包括树枝化聚合物的各种合成方法、结构表征和形态分析等.同时对树枝化聚合物在催化载体、纳米材料、生化和光电功能材料等领域的应用研究进行了详尽的综述.     

7-羟基黄酮衍生物的合成

以间苯二酚为起始原料,通过傅克酰基化、改进的Baker-VenKataraman重排、环合、羟基保护脱保护、酯化或醚化等反应合成了26个7-羟基黄酮衍生物,其结构经1H NMR和MS表征,其中12个7-羟基黄酮衍生物为新化合物.     

溶胶-凝胶法制备Ni_2V_2O_7的丙烷氧化脱氢催化性能

以柠檬酸为配位剂,溶胶-凝胶法制备Ni2V2O7,采用X射线衍射、氮气物理吸附、电感耦合等离子体原子发射光谱、氢气程序升温还原、X射线光电子能谱和透射电子显微镜等技术对催化剂进行了表征.通过差热-热重分析,考察干凝胶分解为Ni2V2O7的温度以及分解过程的热效应并研究了不同焙烧温度与Ni2V2O7的形成、晶化程度之间的关系以及对丙烷氧化脱氢(ODH)制丙烯反应催化性能的影响.     

以阳离子聚合物为介孔模板合成多级孔 TS-1

分别以阳离子聚季铵盐-7和聚季铵盐-6为介孔模板,通过水热法合成了多级孔TS-1沸石,采用X射线衍射、紫外可见光谱、扫描电镜、透射电镜及N2吸附-脱附等手段对所得样品进行了表征,并考察了其催化苯并噻吩及噻吩氧化反应性能.结果表明,聚季铵盐-7的加入对多级孔TS-1的晶化、钛物种的配位状态及晶粒形貌的影响不大;而随着聚季...     

一种新型有机-无机杂化介孔碱性催化材料的合成与表征

通过直接合成方法, 制备了胺基功能化的HMS型有机无机杂化介孔碱性催化材料(Amx-HMS).采用粉末X射线衍射分析、透射电镜、氮气吸附-脱附、29Si固体核磁共振、 红外光谱和元素分析等方法对合成材料进行了表征. 通过典型的2'-羟基苯基甲基酮和苯甲醛缩合制备黄烷酮的反应对其碱催化活性中心进行了表征.     

三维有序大孔杂化材料SiW11O8-39-SiO2和γ-SiW10O8-36-SiO2的制备与表征

通过溶胶-凝胶和聚苯乙烯模板等方法制备了含缺位Keggin阴离子SiW11O8-39和γ-SiW10O8-36的三维有序大孔杂化氧化硅复合材料, 并通过紫外漫反射光谱(UV/DRS)、傅里叶变换红外光谱(FTIR)、固体核磁共振波谱(MAS NMR)等手段对其结构进行了表征. 结果表明, 杂化材料中的Keggin阴离子仍保留其基本骨架结构, 但其与氧化硅基体之间存在化学作用. 杂化材料的孔道结构用扫描和透射电子显微镜(SEM和TEM)进行表征, 其平均孔径为(335±50) nm. 对杂化材料孔壁的微孔性通过氮气吸附进行了测定. 此类材料对水溶液中羟基丁二酸的降解反应具有活性, 光催化过程中未发现Keggin阴离子自载体中脱落的现象.     

两亲性芳香族超支化聚酯的合成、表征及自组装研究

以1,2,4-苯三酸酐和聚乙二醇(聚乙二醇300、聚乙二醇400、聚乙二醇600)为反应单体,首次通过缩聚法合成了一系列两亲性芳香族超支化聚酯.通过FT-IR、1H NMR、GPC、DSC、TGA对超支化聚酯的结构和性能进行了表征,结果表明,利用缩聚法成功合成了两亲性超支化聚酯,并且两亲性超支化聚酯的热性能稳定.两亲性超支化聚酯在水中自组装成囊泡,可以用作微反应器和药物封装等.     

三维有序大孔杂化材料SiW11O39^8——SiO2和γ—SiW10O36^8——SiO2的制备与表征

通过溶胶 -凝胶和聚苯乙烯模板等方法制备了含缺位 Keggin阴离子 Si W1 1 O8- 3 9和 γ-Si W1 0 O8- 3 6的三维有序大孔杂化氧化硅复合材料 ,并通过紫外漫反射光谱 ( UV/ DRS)、傅里叶变换红外光谱 ( FTIR)、固体核磁共振波谱 ( MAS NMR)等手段对其结构进行了表征 .结果表明 ,杂化材料中的 Keggin阴离子仍保留其基本骨架结构 ,但其与氧化硅基体之间存在化学作用 .杂化材料的孔道结构用扫描和透射电子显微镜 ( SEM和TEM)进行表征 ,其平均孔径为 ( 335± 5 0 ) nm.对杂化材料孔壁的微孔性通过氮气吸附进行了测定 .此类材料对水溶液中羟基丁二酸的降解反应具有活性 ,光催化过程中未发现 Keggin阴离子自载体中脱落的现象 .     

新型C-异戊烯基香豆素的合成

以7-羟基香豆素或7-羟基-4-甲基香豆素为原料,通过异戊烯基化反应合成了四个新的C-异戊烯基香豆素,其结构经1H NMR,IR和MS表征.     

新型4-羟色胺类化合物的合成及生物活性

以4-羟基吲哚为原料,经吲哚环4位乙酰基化、3位亲电取代、酰胺化和还原加氢等反应合成目标化合物7.通过核磁共振氢谱及碳谱对化合物进行结构表征,并对目标化合物进行体外抗氧化生物活性测试.初步生物活性测试结果表明,化合物7a,7b,7c和7d对DPPH·均有很强的清除作用(清除率为85.25%~90.73%),7e,7f,7g,7h作用较差;目标化合物与Vc相比,对·OH的清除作用稍差,最高清除率25.66%(Vc的最高清除率为34.67),但各化合物整体水平相当;在清除O-2·能力上化合物7a,7d,7g,7h最大清除率(分别为19.34,35.35,27.93和31.74)均强于同等浓度的Vc(17.58).     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.