A new route to phosphonium polymer network solids via cyclotrimerization

An organo‐main group network solid having tetrahedral phosphonium vertices was prepared from a diacetyl monomer via a straightforward cyclotrimerization reaction. The network solid composition was examined by FT‐IR spectroscopy and elemental microanalysis, revealing quantitative reaction of carbonyl moieties and a 67% degree of cross‐linking. The reaction yielded a material having a layered structure that is comprised of an amorphous polymer and which is thermally stable up to 370 °C in air with a char yield of 40% upon heating as high as 800 °C under N₂. The polymer is stable to 6 M NaOH(aq ) at 60 °C for 24 h and takes up only 10.63% of water by mass at room temperature. The surface morphology, as examined by AFM, revealed a very smooth as‐prepared film (RMS roughness of 3 nm). The specific surface area measured by BET analysis with N₂ gas is 9 m² g^?1, indicating a type II, nonporous material. Physisorption with CO₂ revealed that the phosphonium network solid has additional affinity for CO₂, suggesting that such materials may have use for applications such as CO₂ capture. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 1620–1625     

A new route to indazolone via amidation reaction of o-carboxyazobenzene

One new route for the synthesis of amino-substituted indazol-3,5-dione via the amidation reaction of o-carboxyazobenzenes is reported. Optimization which includes effects of the solvents, molar ratio of starting materials, and dehydrating agents on this reaction has been studied. A possible reaction mechanism has been proposed on the basis of the product's structure, and the steric hindrance could be the main reason for low yield.     

A Cyclopropabenzenylidenethenone (propadienone) via a new route to alkylidenecycloproparenes

Reaction of 1,1-dichloro-2,5-diphenylcyclopropabenzene 6 with Meldrum's acid 8 in the presence of pyridine leads to coupling of the cycloproparenyl cation 7 with the stabilized diketo anion 9. Subsequent, spontaneous, base-induced dehydrochlorination gives the alkylidenecyclopropabenzene 11 in a one-pot reaction. Flash vacuum thermolysis of 11 at 650 degrees C ejects acetone and carbon dioxide, giving cyclopropabenzenylidenethenone 12 that is isolated in an Ar matrix at 20 K and characterized by a strong ketene band at 2107 cm(-1) in the IR spectrum. [reaction: see text]     

Selective oxidation of zirconocyclopentenes via organoboranes

[reaction: see text] A new, convenient, one-pot protocol is described for oxidation of zirconocyclopent-2-enes selectively at the sp(3) carbon by efficient transfer to electrophilic ((c)Hex)(2)BCl followed by oxidation with H(2)O(2)/NaOH to afford 1-alkylidene-2-hydroxymethylcyclopentanes. Results with several substrates show that overall reaction efficiencies for the zirconocene-mediated enyne cyclization, boron transmetalation, and oxidation sequence are generally comparable to yields obtained from protonation of intermediate zirconocycles. The formation of E/Z olefin isomers from the cyclization-oxidation sequence and an acid-catalyzed pinacol-type rearrangement of a vinylsilane are described.     

Studies towards the synthesis of epothilone A via organoboranes

Studies towards the synthesis of epothilone A via organoboranes have been described. A modified procedure for the large-scale preparation of B-gamma,gamma-dimethylallyldiisopinocampheylborane from prenyl alcohol has been developed. This reagent, upon reaction with various aldehydes, provides the corresponding alpha,alpha-dimethylhomoallylic alcohols in high enantioselectivities. The application of this reagent for the synthesis of the C1-C6 subunit of epothilone has been demonstrated. Alternatively, inter- and intramolecular asymmetric reduction protocols have also been utilized for the synthesis of the C1-C6 subunit of epothilone A. The synthesis of the C7-C21 fragment of epothilone A involving asymmetric alkoxyallyl- and crotylboration using alpha-pinene-derived reagents has also been described.     

A new route to acyclic nucleosides via palladium-mediated allylic alkylation and cross-metathesis

A method for the syntheses of E-unsaturated acyclic nucleosides via a combination of palladium-catalyzed allylic alkylation and ruthenium-based cross metathesis is described. This approach provides a concise, efficient and reliable route to new nucleoside analogues.     

A new route to alkenylcyclobutenes

Reaction of titanium cyclobutylidene complexes, prepared by the desulfurizative titanation of 1,1-bis(phenylthio)cyclobutanes with Cp₂Ti[P(OEt)₃]₂, with alkynes gave 1-(alk-1-enyl)cyclobutenes.     

A new route to spirooxindoles

[reaction: see text]Reaction of indole amides 5 with tributylstannane gave spiroindolenines 9 which are readily converted into spiropyrrolidinyloxindoles. This tricyclic system is found in a number of interesting natural products.     

A new route to metallacycloalkanes

Reaction of the bis-alkenyl complex cis-[Pt(PPh3)2(CH2CH2CH=CH2)2] with Grubbs 1st generation catalyst gives, in high yield, the metallacycloalkene cis-[Pt(PPh3)2(CH2CH2CH=CHCH2CH2)], which can be hydrogenated to the metallacycloalkane cis-[Pt(PPh3)2(CH2)6].     

Simple route to new oxadiazaboroles and oxadiazoles via amidoximes

Abstract

The novel push–pull alkene, the 2-(nitro-nitrosomethylene)-pyrrolidine with numerous aliphatic or aromatic amines as nucleophiles afforded amidoximes. Various substituted oxadiazaborole and oxadiazole derivatives were prepared starting from these amidoximes, widening the synthetic applicability of the push–pull alkenes. Acylation of the amidoximes was also examined. The mechanism of the amidoxime formation was investigated by computational methods.     

A new synthetic route to (−)-cassine via asymmetric aminohydroxylation

(−)-Cassine has been synthesized by a new route, asymmetric aminohydroxylation followed by reductive amination.     

A new route to bis(2,4,6-tri-tert-butylphenyl)diphosphene via silylated compound

A new synthesis of stable diphosphene is reported. δ³¹P value is reinvestigated.     

A new synthetic route to polycarbonate

A detailed study has been carried out on the new synthetic reaction of poly(p-xylylene carbonate) from potassium carbonate and p-xylylene dibromide by using a variety of crown ethers as a catalyst, which was recently found by the present authors. Crown ethers having 18-member ring showed the best catalytic property of the various crown ethers, and the reaction was conducted in various solvents at 50–160°C by using 18-crown-6-ether. Both the polymer yield and the molecular weight of the polymer increased in proportion to the amount of potassium carbonate, and they increased rapidly and reached constant values with increasing the concentration of 18-crown-6-ether. They also depended significantly upon the reaction temperature as well as the solvent used. A maximum yield with the highest molecular weight was obtained from the reaction at 100–120°C in diglyme solvent. The spectroscopic analysis of the polymer indicated that all the end groups of the resulting polymer had the structure of benzyl bromide. From these results, a plausible mechanism was proposed for the reaction. Similar reactions were also conducted by using several aliphatic dibromides, Br? (CH₂)_x? Br, in place of p-xylylene dibromide. The products were strongly dependent of the value of x: polycarbonate was obtained from dibromides with ≧4, and cyclic carbonates from dibromides with ≦3.     

A new route to C-aryl glycosides

[reaction: see text] A six-step route for de novo synthesis of C-aryl glycosides based on cycloaddition of an aryl nitrile oxide with 4-pentyn-2-ol has been developed.