Removal of C3F8 Via the Combination of Non-Thermal Plasma, Adsorption and Catalysis

The feasibility of C₃F₈ abatement via combining nonthermal plasma with adsorption and/or catalysis is investigated in this study. In terms of the simultaneous combination of plasma, adsorption and catalysis (CPAC), three different configurations including A/C layer (adsorbent layer prior to catalyst layer), C/A layer (catalyst layer prior to adsorbent layer) and A/C mixture (adsorbent and catalyst are mechanically mixed) are adopted. For all the experimental tests conducted in this study, the gas stream consists of 500 ppm C₃F₈, 2% O₂, and balanced N₂. The experimental results indicate that C₃F₈ removal efficiencies depend on what kind of packing material is adopted (adsorbent, catalyst or both) and how the material is packed within the plasma reactor. The removal efficiencies obtained with different reactors are in the order as: CPAC (A/C layer; AC mixture) > CPA (plasma with adsorbent alone) > CPC (plasma with catalyst alone) > CPAC (C/A layer). The indentified products after treatment include CO₂, CO, N₂O and CF₄. The formation of C₂F₆ is not observed in this study, which is encouraging since the global warming potential of C₂F₆ is actually higher than that of C₃F₈.     

Hydroformylation and hydrogenation of styrene with carbon monoxide and water catalyzed by iron carbonyls

Styrene is hydrogenated to ethylbenzene and hydroformylated to 2- and 3- phenylpropanol by CO and H₂O in the presence of a Fe₃(CO)₁₂ + Et₃N + NaOH catalyst system at 140°C and 100 bar in H₂O/MeOH. The product composition depends strongly on the H₂O/MeOH ratio (A); alcohol formation is favoured at A  3/1 and ethylbenzene formation at A  1/2. 1,3-Diphenylbutane is formed as by-product.     

PAH/PAH(CF3)n Donor/Acceptor Charge-Transfer Complexes in Solution and in Solid-State Co-Crystals

A solution, solid-state, and computational study is reported of polycyclic aromatic hydrocarbon PAH/PAH(CF₃)_n donor/acceptor (D/A) charge-transfer complexes that involve six PAH(CF₃)_n acceptors with known gas-phase electron affinities that range from 2.11(2) to 2.805(15) eV and four PAH donors, including seven CT co-crystal X-ray structures that exhibit hexagonal arrays of mixed π-stacks with 1/1, 1/2, or 2/1 D/A stoichiometries (PAH=anthracene, azulene, coronene, perylene, pyrene, triphenylene; n=5, 6). These are the first D/A CT complexes with PAH(CF₃)_n acceptors to be studied in detail. The nine D/A combinations were chosen to allow several structural and electronic comparisons to be made, providing new insights about controlling D/A interactions and the structures of CT co-crystals. The comparisons include, among others, CT complexes of the same PAH(CF₃)_n acceptor with four PAH donors and CT complexes of the same donor with four PAH(CF₃)_n acceptors. All nine CT complexes exhibit charge-transfer bands in solution with λ_max between 467 and 600 nm. A plot of E(λ_max) versus [IE(donor)−EA(acceptor)] for the nine CT complexes studied is linear with a slope of 0.72±0.03 eV eV⁻¹. This plot is the first of its kind for CT complexes with structurally related donors and acceptors for which precise experimental gas-phase IEs and EAs are known. It demonstrates that conclusions based on the common assumption that the slope of a CT E(λ_max) versus [IE−EA] plot is unity may be incorrect in at least some cases and should be reconsidered.     

Reaction mechanism in the formation of perovskite Pb(Fe1/2Nb1/2)O3 by calcining of mixed oxides (CMO)

A calcining at 300°C and sintering process were proposed to obtain a pure perovskite phase Pb(Fe_1/2 Nb_1/2)O₃ from a 4PbO/Nb₂O₅/Fe₂O₃ mixture, which is calcined at 300°C for several days and sintered at various temperatures for 2h; the resultant powder was air quenched. The X-ray powder diffraction pattern of the sintered sample is carefully analyzed to identify intermediate phases. The effects of calcining at 300°C and sintering on obtaining PFN are based on the deformation of Pb₅Fe₄Nb₄O₂₁. A reaction mechanism for the calcining cycle of Pb(Fe_1/2 Nb_1/2)O₃ is proposed.     

SiO2/SnO2 and Sn/Sb-oxide/SiO2 gel-derived composites. Part 2: Thermal evolution and phase analysis

The thermal behaviour of samples with nominal composition 80/20=SiO₂/SnO₂, class B, 76.8/19.2/4.0=SiO₂/SnO₂/Sb₂O₅, class C₁, and 76.8/19.2/2.0/2.0=SiO₂/SnO₂/Sb₂O₅/Sb₂O₃, class C₂, is studied in the interval 25–1050°C by various instrumental methods. Results on these classes of samples, obtained from alkoxide precursors, are compared themselves and with samples of class A obtained from Si(OEt)₄ and SnCl₄. The segregation and crystallization of SnO₂ occurs at 400°C in the presence of microdomains of SnO₂·nH₂O in the SiO₂ gel matrix (class A), whereas it is observed at 700°C for samples B and C composed of Sn and Sb cations homogeneously dispersed in SiO₂. This fact implies different mechanisms of SnO₂ nucleation and growth. The crystallization of SiO₂ is observed at 1200°C for samples A, at 1050°C for B and at 800°C for C. For this latter, the presence of Sb-oxide/ SiO₂ reactive glass is invoked to the low-temperature crystallization of SiO₂. G. Carturan, R. Ceccato, R. Campostrini, G. Principi, and U. Russo, submitted to J. Sol-Gel Sci. Tech.     

On the difference of reactivities of various aggregated forms of aluminium triisopropoxide in initiating ring-opening polymerizations

The polymerization of ε-caprolactone (εCL) initiated with aluminium triisopropoxide (Al(OⁱPr)₃) trimer ( A ₃) and/or tetramer ( A ₄) was studied. The rate of A ₃ ⇔︁ A ₄ interconversions in the diluted (≤0,1 mol · L^-1) C₆D₆, C₆D₆/εCL, and THF/εCL solutions were found to be slow, when compared with the rate of propagation. Comparison of the ¹H NMR spectra of the initiators with those of the polymerization mixtures revealed that A ₃ is much more reactive than A ₄ in their reactions with εCL. From the initiator reacted with εCL all threeOⁱPr groups from Al(OⁱPr)₃ are transferred into the poly(εCL) as end groups. Kinetic studies of polymerization confirmed the large reactivity difference between A ₃ and A ₄.     

Extraction behaviors of Eu,Th, U and Am with diamides+thenoyltrifluoroacetone

N,N-dimethyl-N,N-dihexyl-3-oxapentanediamide, DMDHOPDA, N,N-dihexyl-3-thiopentanediamide, DHTPDA and N,N-dihexyl-3-oxapentanediamide, DHOPDA were synthesized and tested for the synergistic extraction of Eu³⁺, Th⁴⁺, UO ₂ ²⁺ , NpO ₂ ⁺ and Am³⁺ with thenoyltrifluoroacetone (HTTA). Although Eu³⁺, Th⁴⁺, UO ₂ ²⁺ and Am³⁺ were not extracted by DHTPDA or DHOPDA alone, they were extracted synergistically when combined with HTTA. Analysis of the dependency of extraction on pH and extractant concentration indicated that the dominant extracted species were Eu(TTA)₃(A), Th(TTA)₃(A)(X), UO₂(TTA)₂(A) and Am(TTA)₃(A) (where A is diamide, and X is chloroacetate or ClO ₄ ^– ).     

Determination of55Fe/58Fe and59Fe/58Fe isotopic ratios in irradiated Na2/FeNO/CN/5/.2H2O by SSMS

A procedure for the measurement of the isotopic composition of Fe in rradiated Na₂/FeNO/CN/₅/.2H₂O samples by SSMS is described. Decomposition with K₂S₂O₇, followed by extraction of Fe was necessary to eliminate interferences in the mass spectra. A study of the remaining interferences showed that they were of organic origin from the residual MIBK used for the extraction. The order of magnitude of the⁵⁵Fe/⁵⁸Fe and⁵⁹Fe/⁵⁸Fe ratios was calculated.SSMS: spark source mass spectrometry.     

W/O、O/W型卵磷脂乳状液对CaCO3晶型的影响

Ｗ／Ｏ、Ｏ／Ｗ型卵磷脂乳状液对ＣａＣＯ３晶型的影响姚松年＊缪炜童华张操墨熊海涛（武汉大学分析测试科学系，武汉４３００７２）关键词：卵磷脂乳状液ＣａＣＯ３碳酸钙可以方解石、霰石、球霰石、胶状碳酸钙等形态存在且依次稳定性降低。珍珠是生物矿化产物，除氨基酸...     

“Brown-Ring”-Related Coordination Polymers of the Quartet-{FeNO}7 Chromophore

A conspicuous detail of the so-called brown-ring test (the analytical test on nitrate) is the reddish color of the bottom layer of concentrated sulfuric acid, which develops upon the bleeding of the brown layer into the acid. Crystals of the same color form from a solution of ferrous sulfate in concentrated sulfuric acid on saturation with gaseous nitric oxide. The structure of this H₃O[{Fe(NO)(μ₄-SO₄)(μ₂-SO₄)_0.5}_n/n] ( 1a ) is made up from infinite chessboard-type layers with sulfur on the field junctions and Fe(NO) moieties below the black and above the white fields. An Fe–N–O angle of about 160° causes disorder in the tetragonal space group I4/mmm. A similar crystal pathology was found in the related [{Fe(MeOH)(NO)(μ₄-SO₄)}_n/n] ( 1b ) in the same crystal class. A one-dimensional coordination polymer is formed in crystals of a third compound that comprises the Fe(NO)O₅ coordination pattern, namely the brown oxalato species [{Fe(H₂O)(NO)(μ₂-ox)}_n/n · H₂O] ( 2 ). A still larger NO tilt of about 156° is not obscured by disorder in the triclinic crystals of 2 .     

Über Oxocuprate. XVIII. Zur Kenntnis von Sr2CuO2Br2 mit einem Beitrag über La2NiO4

About Oxocuprates. XVIII. On Sr₂CuO₂Br₂ and a Contribution about La₂NiO₄ Sr₂CuO₂Br₂ (A) and La₂NiO₄ (B) were prepared and investigated by single crystal X-ray technique. (A) is isotypic with Sr₂CuO₂Cl₂, (B) with K₂NiF₄. Both compounds crystallize in the space group D–I4/mmm with the lattice constants (A): a = 399.1, c = 1 713.6 pm, (B): a = 387.6, c = 1 268.3 pm. A discussion about the octahedral distortion of Cu²⁺ and Ni²⁺ respectively in respect to other isotypic compounds is given.     

Structural,electronic and elastic properties of the Laves phases WFe2, MoFe2, WCr2 and MoCr2 from first-principles

A theoretical analysis of the phase stability, electronic and mechanical properties, and Debye temperatures of the C14-type Laves phases (WFe₂, MoFe₂, WCr₂ and MoCr₂) has been presented from density functional theory. The phase stability follows the order: WFe₂>MoFe₂>WCr₂>MoCr₂. An exchange of electrons takes place between Fe and W/Mo atoms, and there is also electron transfer between Cr and W/Mo. The W–W and Mo–Mo bonds are of the valence character, while the Fe–W/Mo and Cr–W/Mo bonds are of ionic character. The bonding force of A–A is greater than that of A–B in C-14 AB₂ type Laves phases (WFe₂, MoFe₂, WCr₂ and MoCr₂). The ductility of MoCr₂ is higher than others. The hardness of WFe₂ (14.1 GPa) is the highest, and the hardness of MoCr₂ is the lowest. The incompressibility for these laves phases along c-axis is larger than that along a-axis. The Debye temperature (θ_D) of MoFe₂ is 619 K, which is the highest in those phases. These laves phases also have high melting points, which follows the order: WFe₂>MoFe₂>WCr₂>MoCr₂.     

Monte‐Carlo Study of Triblock Copolymer/Homopolymer Blend Films

The morphologies of triblock copolymer/homopolymer blend films confined between two neutral hard walls were studied via MC simulations on a simple cubic lattice. For ABA/A and ABA/B blend films, the effects of φ_h (the volume fraction of the homopolymer) and M_h/M_b (the ratio of the molecular mass of the homopolymer to that of the corresponding blocks) on the morphologies were investigated in detail. For both ABA/A and ABA/B blend films, a higher φ_h or M_h/M_b would result in stronger macrophase separation between the triblock copolymer and homopolymer. For ABA/C blend films, M_h/M_b hardly influences the morphologies of homopolymer domains regardless of whether the homopolymer C is more compatible with block A or with block B. Compared to AB/A and AB/C blend films, the morphologies of ABA/A (or ABA/B) and ABA/C blend films are much more irregular. The simulated results in this work show good consistency with experiments and other simulations.

     

Co<Subscript>2</Subscript>(OH)<Subscript>3</Subscript>Cl xerogels with 3D interconnected mesoporous structures as a novel high-performance supercapacitor material

Co₂(OH)₃Cl xerogel interconnected mesoporous structures have been prepared by a facile one pot sol-gel process and heat treated at 200 and 400 °C. All samples are studied for their morphology, structure, and electrochemical stability upon cycling. The specific capacitance of the as-prepared Co₂(OH)₃Cl from single electrode study is 450 F/g, when the electrodes are cycled in 3 M KOH at a specific current 2 A/g. Interestingly, capacity retention after 500 and 1000 cycles is about 92 and 75 %, respectively. Sample heated at 200 °C exhibits 308 F/g at 2 A/g and that heated at 400 °C shows only 32 F/g at 0.2 A/g. With an increase in preparation temperature, amorphous Co₂(OH)₃Cl is converted to crystalline Co₃O₄ phases with lower electrochemical performance. In full cell study, as-prepared Co₂(OH)₃Cl showed a capacity of about 49 F/g as asymmetric capacitor and 32 F/g as symmetric capacitor at 2 A/g current density. Co₂(OH)₃Cl being a novel porous material with merits of homogeneous porosity, high surface area, and an interconnected three dimensional (3D) structure exhibits considerably high capacitance. With a significant specific capacity and electrochemical stability, the synthesized material is a novel potential candidate for supercapacitors.

Open image in new window

Graphical abstract ?

     

First-Known High-Nuclearity Copper–Nickel Carbonyl Cluster: [CuxNi35−x(CO)40]5− (with x=3 or 5) Containing an Unprecedented 35-Atom Three-Layer hcp Triangular Stacking Metal-Core Geometry

Reactions of [Ni₆(CO)₁₂]^2- (1) with CuBr₂ have given rise in small yields (10%) to the first example of a close-packed copper-nickel carbonyl cluster; its formulation as [Cu_xNi_35-x(CO)₄₀]^5- (with x=3 or 5) is based upon a low-temperature CCD X-ray crystallographic determination coupled with an elemental analysis and X-ray fluorescence measurements. This air-unstable black pentaanion (2) together with one co-crystallized bromide anion, six [NMe₄]⁺ counterions, and one solvated acetone molecule comprise the crystallographic independent part in a monoclinic unit cell of P2₁/n symmetry (with Z=4). The geometrically unprecedented 35-atom hcp M(A)₂M(B)₃Ni₃₀ polyhedron of pseudo-D_3h symmetry consists of a central 15-atom equilateral ₄M(B)₃Ni₁₂ triangle that is capped on both sides by two symmetry-related 10-atom equilateral ₃M(A)Ni₉ triangles. The 35-atom M(A)₂M(B)₃Ni₃₀ core is encapsulated by 40 COs, whose connectivities, due to an extra CO ligand on one of the three triangular sides, reduce the pseudo D_3h symmetry of the metal core to C_s. An elemental analysis via AA and X-ray fluorescence measurements resulted in Cu/Ni ratios of 3.2/31.8 and 3.7/31.3, respectively, that are consistent with the metal core being either Cu₅Ni₃₀ (i.e., M(A)=M(B)=Cu) or Cu₃Ni₃₂ (i.e., M(A)=Ni; M(B)=Cu). Several attempts to determine the actual stoichiometry of the metal core by use of electrospray FT/MS/ICR measurements were unsuccessful. The maximum metal-core diameter of 2 is ca. 0.41 nm parallel and 0.85 nm perpendicular to the principal 3-fold axis.     

X-ray spectral and photoelectron study of the electronic structure of copper phthalocyanine and its fluoro-substituted analog

A complex experimental study of Cu(2p _3/2), Cu(2p _1/2) photoelectron and Kα_1,2 and Lα_1,2 X-ray emission spectra of copper in copper phthalocyanine CuPcH₁₆ and its fluoro-substituted analog CuPcF₁₆ is carried out. A charge transfer model is used to interpret the spectra. It is shown that Kα₁ and Kα₂ lines of the spindoublet of copper have a complex structure due to the processes of metal-to-ligand charge transfer. The role of a satellite in the formation of emission lines is revealed.     

Dynamics simulation and reaction pathway analysis of characteristics of soot particles in ethylene oxidation at high temperature

Soot particles characteristics were investigated numerically for high temperature oxidation of C₂H₄/O₂/N₂ (C/O ratio of 2.2) in a closed jet-stirred/plug-flow reactor (JSR/PFR) system. Based on the growth mechanism of polycyclic aromatic hydrocarbons (PAHs), two mechanisms were used to explore the formation pathways of soot precursors and soot. Numerical results were compared with the experimental and reference data. The simulation results show that the value predicted for small molecule intermediates within A1 gives a strong regularity, consistent trend with reference data. However, with the hydrogen-abstraction-carbon-addition (HACA) growth mechanism, the predicted value for beyond-A1 PAH macromolecules and soot volume fraction are smaller than the experimental data. The results also show that the predicted soot volume fraction is in good agreement with experimental data when a combination of the HACA and PAHs condensation (HACA + PAH-PAH) growth mechanisms is used. Analyses of the A1 sensitivity and reaction pathway elucidated that A1 are mainly formed from C₂H₃, C₂H₂, C₃H₃, C₆H₅OH, A1C₂H and A1-. The reaction 2C₃H₃ → A1 is the dominant route of benzene formation. The prediction results and an analysis of the A3 reaction pathway indicate that the growth process from benzene to larger aromatic hydrocarbons (beyond two-ring polycyclic aromatic hydrocarbons [PAHs]) goes by two pathways, i.e., HACA combined with the PAH-PAH radical recombination and addition reaction growth mechanisms.     

Ca1.5Eu3Sn0.5O7: a calcium europium tin oxide with a novel structure

A new quaternary compound in the Ca–Eu–Sn–O system, namely calcium europium tin hepta­oxide, Ca_1.5Eu₃Sn_0.5O₇, was prepared by solid‐state reaction at 2073 K. All atoms in the structure are on 4i special positions (on mirrors) in space group C2/m. Ca/Eu sites are situated within two O octa­hedra and within two sevenfold coordination sites surrounded by O‐capped trigonal prisms. A Ca/Eu/Sn site is coordinated by five O atoms. The structural formula can be represented as (Ca_0.28Eu_0.72)(Ca_0.16Eu_0.84)(Ca_0.46Eu_0.54)(Ca_0.28Eu_0.72)(Ca_0.32Eu_0.18Sn_0.50)O₇. The crystal structure is a new type and is related to the structure of B‐form Eu₂O₃.     

Controlled synthesis of core-shell Fe2O3@N-C with ultralong cycle life for lithium-ion batteries

Development of low-cost electrode materials with long cycle life and high volumetric capacity is important for large-scale applications of lithium-ion batteries （LIBs）.Here,an electrode made from Fe₂O₃encapsulated with N-doped carbon （Fe₂O₃@N-C） via ZIF-8 coating and carbonization process is reported.A cavity was generated between the Fe₂O₃and N-C material during the carbonization process that is conducive to alleviating the volum...     

Coordination chemistry of polyoxomolybdates: The versatile behavior of amidoximes

The reactions of 2-thienylamidoxime and 2-thienylmethylamidoxime with [MoO₂(acae)₂] or x-(NBu₄ [Mo₈O₂₆]. in alcohols or acetonitrile, yield a number of compounds with different nuclearities and various molybdenum cores, such as the compact {Mo₄O₁₀(OMe)₂}²⁺ the cyclic {Mo₄O₁₂}, and the open {Mo₁₁On_211-1}²⁺ (n= 2 or 4) cores. Addition of NH₂OH to the reaction mixtures results in the formation of nitrosyl complexes containing either the Mo(NO)³ or the Mo(NO) ₂ ² units. The amidoxime component may be present either as RC(NH₂)NHO. RC(NHi2), RC(NH)NHO or RC(NH)NO²: ligands, or as hydrogen-bonded RC(NH₂)NOH molecules. The crystal structures of [MoO(acac)RIC'(NH₂)NO] {R^JC(NH)NO}](1), [Mo(NO)(acae)₂ {R^IC(NH₂)NO}] (4), (NBu₄)₂[Mo₄O₁₀(OMe)₂{R^IC(NH) NO}₂] (12a),(NBu₄)₂(H₃O)[Mo₅O₁₃(OMe)₄(NO)].2R¹C(NH₂)NOH(13b) and [R¹C(NH₂)₂)]₃[Mo₅O₁₃(OEt)₄(NO)] (14) (R¹=2-thienyl) are reported. The cryslallographic data for these compounds are as follows:1, mono-clinic. P2₁ a.a=24.547(4)A. b=8.188(4)A. c=9.607(3)A, ß=96.18(3)^c, R=0.046. R₁₀=0.050: 4. monoclinic, P2₁c.a=8.265(2)A, b=9.381(2)A,_c=24.770(4)A, c = 24.7701(4) A, ß=93.99(2). R=0.039. R=0.042;12a, monoclinic, C2/c, a= 19.570(5)A. b=16.883(4)A, c = 19.82(l)A. ß= 114.36(5)°, R=0.064,R.=0.074;13b monoclinic;. P2₁ c.a=18.197(5)A, b=15.857(14) A, c = 23.075(17) A, =93.20(3). R=O.050. R_w=0.057;14, trictinic PI, a = 9.871(3),b= 14.138(3).c= 14.781(8)A. =92.67(2)^c =99.36(1)° =90.52(2)°. R = 0.044. R_w = 0.049. Particular attention is focused on the various coordination modes that the different ligand forms adopt: µ- O, ²N,O, ₂N',O, µ-N: ²O. and ₃- N:N:₂O.