Volumetric Parameters of Interaction of Monosaccharides (D-xylose,D-arabinose,D-glucose,D-galactose) with NaI in Water at 298.15 K

Densities for monosaccharide (D-xylose, D-arabinose, D-glucose, D-galactose)–NaI–water solutions were measured at 298.15 K and were used to calculate the apparent molar volumes of these saccharides and NaI. Infinite dilution apparent molar volumes for the saccharides (V_,S) in aqueous NaI and those for NaI (V_,E) in aqueous saccharide solutions and partial molar volumes of the saccharides (V_S) and NaI (V_E) at each composition have been evaluated, together with the standard transfer volumes of the saccharides (_tr V_S) from water to aqueous NaI and those of NaI (_trV_E) from water to aqueous saccharide solutions. It was shown that the _tr V_S and _trV_E values are positive and increase with increasing co-solute molalities. Volumetric parameters indicating the interactions of NaI with saccharides in water were also obtained and applied to explore the interactions between saccharides and NaI in water. A comparison of the _ES value for NaI with those for NaCl and NaBr showed that for a given saccharide, except for glucose, the _ES value for NaBr is the largest of three sodium halides (NaCl, NaBr and NaI). These were interpreted in terms of the apparent molar electrostriction volumes ( V_e) and the structure interaction model.     

Mean configurational distribution function for the steady state and stern-volmer representation

A slight discrepancy appears between the treatment of the steady state of diffusion controlled bimolecular quenching of excited species either by the pair model or by the continuum model. A simplifying assumption is pointed out which helps to solve the steady state case but which is responsible for the discrepancy. The error involved is of small importance considering the experimental accuracy.

---

- , . , , . , .

     

Possibilities of applying the Piloyan method of determination of decomposition activation energies in the differential thermal analysis of polynitroaromatic compounds and their derivatives

The Piloyan activation energiesE, as well as the initial exotherm temperaturesT _D, are determined for sixN-monoalkyl- and fiveN,N-dialkyl-2,4,6-trinitroanilines. By comparison withR _f-factors, orR _M-functions of paper chromatography, the molecular-structural dependences ofE andT _D are studied for these compounds. Relationships are also found between the termE · T _D ^–1 and theR _M-functions. The effects are discussed of the introduction of the 6-nitro group into the TV-substituted 2,4-dinitroanilines, and of the introduction of the 4-nitro group into the 2,6-dinitro analogues, upon the thermal stabilities of the resulting 2,4,6-trinitroanilines.

---

Zusammenfassung Die AktivierungsenergienE nach Piloyan und die Anfangswerte der ExothermenT _D der sechsN-monoalkyl- und fünfN,N-Dialkyl-2,4,6-trinitroaniline wurden bestimmt. Unter Berücksichtigung des Vergleichs mitR _f-Faktoren oderR _M-Funktionen der Papierchromatographie wurden die molekularstrukturellen AbhÄngigkeiten der WerteE undT _D dieser Verbindungen untersucht. ZusammenhÄnge wurden auch zwischen dem AusdruckE · Tw _D ^–1 und denR _M-Funktionen gefunden. Der Einfluss der Einführung der 6-Nitrogruppe in dieN-substituierten 2,4-Dinitroaniline, sowie der Einfluss der Einführung der 4-Nitrogruppe in 2,6-Nitroanaloge auf die ThermostabilitÄt der resultierenden 2,4,6-Trinitroaniline werden erörtert.

---

Résumé On a déterminé les énergies d'activation par la méthode de Piloyan ainsi que les températures initialesT _D de l'effet exothermique de sixN-monoalcoyl- et cinqN,N-dialcoyl-2,4,6-trinitroanilines. En se référant aux facteursR _F ou aux valeurs des fonctionsR _M en Chromatographie sur papier, on a étudié la dépendance entre les valeurs deE et deT _D sur les caractéristiques moléculaires-structurales de ces composés.On a également trouvé des rapports entre le termeE · T _D ^–1 et les fonctionsR _M. On discute l'influence de l'introduction du groupe 6-nitro dans les 2,4-dinitroanilinesN-substituées ainsi que l'influence de l'introduction du groupe 4-nitro dans les 2,6-dinitro analogues sur la stabilité thermique des 2,4,6-trinitroanilines qui en résultent.

---

N-- N,N--2,4,6- E , T _D. R _f,- R _M — , - E T _D. E.T _D ^–1 R _M-. 6N- 2,4- 4 2,6- 2,4,6- .

---

---

The authors would like to thank Mrs. Anna Colláková for careful DTA measurements, and Dr. Ladislav Smolka for help in the treatment of the measured results with the Wang 600 computer.     

Thiolactame als Reagenzien in der quantitativen Analyse. IX

Zusammenfassung Thiocaprolactam (T) eignet sich zur Goldbestimmung im Konzentrationsbereich 10 bis 130 g Au/ml mit einem Fehler von ±0,5g. Thiocaprolactam bildet mit [AuCl₄]^– eine Verbindung im molaren Verhältnis TAuCl=112, mit [AuJ₄]^– im molaren Verhältnis TAuJ=213. Dagegen bilden sich im System T:Au:Br zwei verschiedene Verbindungen: Ein Bromidkomplex mit höherem Goldgehalt TAu=12, der mit Chloroform extrahierbar ist, und eine sich als Niederschlag ausscheidende Verbindung mit dem Verhältnis TAuBr=112.

---

Thiolactams as reagents in quantitative analysis. IX

Summary Thiocaprolactam (T) is suitable for the determination of gold in the concentration range 10–130g Au/ml with an error of ±0.5g. Thiocaprolactam yields with [AuCl₄]^– a compound in the molar ratio TAuCl=112, with [Aul₄]^– in the molar ratio TAuI=213. On the other hand various compounds result in the system TAu Br. The molar ratio in the case of the bromide complex has a higher gold content, namely TAu=12; this product is extractable with chloroform and a compound that comes down as a precipitate shows the ratioT Au Br=112.

---

---

Herrn Dr.K. Czerepko möchte ich hiermit meinen Dank für die Diskussion der Ergebnisse aussprechen.     

Formation of N-butane in the pyrolysis of ethylene [1]

Yields of n-C₄H₁₀ have been measured from the flow pyrolysis of C₂H₄ at 897 (±7) K. From 77 to 720 Torr the order of n-C₄H₁₀ formation was found to be 2.0±0.3 The rate constant for the reaction, was estimated to be 2.4(±0.6)×10^–4l mol^–1s^–1.

---

-C₄H₁₀ C₂H₄ 897 (±7) . -C₄H₁₀ 77 720 2.0±0.3. 2C₂H₄C₂H₃+C₂H₅ 2,4 (±0,6)×10^{–4 –1–1}.

     

Apparent molar volumes of aqueous calcium chloride to 250°C, 400 bars,and from molalities of 0.242 to 6.150

Relative densities of CaCl ₂ (aq) with 0.22ml(mol-kg^–1)6.150 were measured with vibrating- tube densimeters between 25 and 250°C and near 70 and 400 bars. Apparent molar volumes V calculated from the measured density differences were represented with the Pitzer ioninteraction treatment, with appropriate expressions chosen for the temperature and pressure dependence of the virial coefficients of the model. It was found that the partial molar volume at infinite dilution V ^o , and the second and third virial coefficients B ^V and C ^V , were necessary to represent V near the estimated experimental uncertainty. The ionic-strength dependent ^(1)v term in the B ^V coefficient was included in the fit. The representation for V has been integrated with respect to pressure to establish the pressure dependence of excess free energies over the temperature range studied. The volumetric data indicate that the logarithm of the mean ionic activity coefficient, ln ±(CaCl ₂ ), increases by a maximum of 0.3 at 400 bars, 250°C, and 6 mol-kg^–1 as compared with its value at saturation pressure.     

51V NMR studies of a system vanadium pentoxide-potassium pyrosulfate

Two states of pentavalent vanadium in the system K₂S₂O₇–V₂O₅ have been found by the⁵¹V NMR method. For state 1 a polynuclear structure with greater distorted local environment compared with V₂O₅ is retained. For state 2 the nearest environment of vanadium differs significantly from V₂O₅, and is probably characterized by the higher ionic nature of the vanadium-oxygen bond.

---

⁵¹V K₂S₂O₇–V₂O₅ . V₂O₅. , V₂O₅ , , -.

     

Determination of the ratio of the hydrogen and manganese absorption cross sections by the manganese bath technique

The ratio of the hydrogen and manganese neutron absorption cross sections, _H/_Mn, is a most important parameter in the determination of radioactive neutron source strength by the manganese bath technique. The ratio is well measured by observing the change in⁵⁶Mn activity induced in the manganese bath by a fixed neutron source as the manganese concentration of the bath is changed. In the present study, the neutron source was a Maxwellian beam from²⁵²Cf. Concentrations were determined by the two methods: volumetric and gravimetric. The cross section ratio has turned out to be _H/_Mn=0.02506.     

Application of thermal analysis in the study of alkyd-allyl moulding compounds

Alkyd-allyl moulding compounds containing diallyl orthophthalate as networking monomer and five other unsaturated polyester resins were investigated by DTA. Analysis of DTA curves allowed choice of the alkyds forming well-cured moulding compounds within the investigated monomer. The thermal resistance and acetone absorption of the cured sample confirmed the choice of the alkyd.The influence of 6 different powder fillers on the exothermic effect of curing of alkydallyl moulding compounds was evaluated by DTA.

---

Zusammenfassung Mittels DTA wurde die HÄrtung von Alkyd-Allyl Pre\massen aus o-Diallylphthalat und fünf Polyestern untersucht. Anhand der DTA-Kurven konnten gut gehÄrtete Pre\massen ergebende Alkyde ausgewÄhlt werden. Thermische StabilitÄt (TG) und Acetonaufnahme bestÄtigen die ZuverlÄssigkeit dieser Auswahlmethode. Mit dieser Methode wurde auch der Einflu\ von sechs verschiedenen Füllstoffen auf die WÄrmeeffekte des HÄrtungsprozesses bestimmt.

---

— - . , . . - .

     

Thermal and infrared spectrum analyses of natural and synthetic andersonites

The thermal decompositions of natural and synthetic andersonites were studied. Two partly overlapping dehydration steps and three partly overlapping decarbonation steps were observed. The second dehydration and the first decarbonation steps also partly overlap. During decarbonation, the gradual formation of sodium diuranate and monoclinic and hexagonal phases in the Na₂U₂O₇-CaUO_4–x system was proved. The results were correlated with measured infrared spectra using site and factor group analysis and X-ray structure analysis. The chemical formula inferred for natural andersonite, Na₂Ca[UO₂(CO₃)₃] 5.6H₂O, agrees with that proposed for its synthetic analogue.

---

Zusammenfassung Die thermische Zersetzung von natürlichem und synthetischem Andersonit wurde untersucht. Sie umfasst zwei teilweise überlappende Entwässerungs- und drei teilweise überlappende Decarboxylierungsstufen. Der zweite Entwässerungs- und der erste Decarboxylierungsschritt überlagern einander ebenfalls teilweise. Während der Decarboxylierung wird die allmähliche Bildung von Natriumdiuranat und monoklinen und hexagonalen Phasen des Systems Na₂U₂C₇-CaUO_4–x nachgewiesen. Die Ergebnisse wurden mit den gemessenen IR-Spektren unter Benutzung der site- und Faktor-Gruppenanalyse sowie Röntgenbeugungsuntersuchungen korreliert. Die für natürlichen Andersonit abgeleitete Formel Na₂Ca[UO₂(CO₃)₃].5,6H₂O stimmt mit der für synthetischen Andersonit vorgeschlagenen überein.

---

. . . , Na₂U₂O₇-CaUO_4–x. . Na₂Ca[UO₂(CO₃)₃] 5,6₂, ** , .

     

Thermal decomposition of ammonium permanganate

The parent material, ammonium permanganate, was carefully decomposed in air at 120°. The product, referred to as the starting material (SM), was then subjected to thermal treatment in air for 5 hr in the temperature range 150–1200°. Chemical analysis of SM indicated that the main decomposition product of NH₄MnO₄ was Mn₂O₃, together with MnO₂, NH₄NO₃, H₂O and O₂. Mn₃O₄ started to form at 900°. The infrared spectra of various calcination products revealed the retention of NH ₄ ⁺ in the lattice structure up to 300°, and reflected the presence of excess oxygen as coordinated O ₂ ^– . The TG, DTA and IRA results on SM supported the chemical analysis data. X-ray analysis was carried out for phase identification and to follow transformations and the formation of a solid solution between MnO₂ and Mn₂O₃.

---

Zusammenfassung Die Muttersubstanz, Aramoniumpermanganat, wurde in Luft bei 120° vorsichtig zersetzt. Das dabei erhaltene Ausgangsmaterial (SM) wurde danach in Luft 5 Stunden im Temperaturbereich von 150–1200° thermisch behandelt. Die chemische Analyse von SM ergab, daß als Hauptprodukt der Zersetzung von NH₄MnO₄, Mn₂O₃ auftritt neben MnO₂, NH₄NO₃, H₂O und O₂. Die Bildung von Mn₃O₄ beginnt bei 900°. Aus Infrarotspektren verschiedener Kalzinierungsprodukte ist ersichtlich, daß in der Gitterstruktur NH ₄ ⁺ bis 300° zurückgehalten wird und überschüssiger Sauerstoff in Form von koordiniertem O₂ vorliegt. Die Ergebnisse der TG-, DTA- und IRA-Untersuchungen von SM bestätigen Daten der chemischen Analyse. Mittels Röntgenanalyse wurden die Phasen identifiziert und der Verlauf der Phasenübergänge und der Bildung einer festen Lösung zwischen MnO₂ und Mn₂O₃ verfolgt.

---

120°. , , 5 150–1200°. , , , , . 900° Mn₃O₄. 300° - O ₂ ^– . , . , .

---

---

Paper presented at the World Conference on Thermal Analysis, Madeira (Portugal), 1986.     

Decomposition of N2O over CuxMg1?xAl2O4 catalysts

The results show that there is not difference between the catalytic activities of two series of Cu_xMg_1–xAl₂O₄ catalysts, despite a small but significant difference in cation distribution. The activity is mainly affected by the presence of CuO.

---

, , , , - Cu_XMg_1–XAl₂O₄. CuO.

     

Ligand exchange between bis-acetylacetonato cobalt(II) and organotin compounds SnR2Cl2 (R=Ph, Et), II. Mechanism of ligand exchange between acetylacetonate complexes of Co(II)

Ligand exchange between the compounds Co(AA)₂Py₂ and Co(AA)Clpy_x (x=1 or 3) formed in the, system, CO(AA)₂–SnR₂Cl₂(R=Ph, Et) in chloroform with pyridine has been established to be catalyzed by SnR₂Cl₂. An interpretation of the catalytic action of SnR₂Cl₂ is suggested.

---

, Co(AA₂py₂ Co(AA)Clpy_x (x=1 3) (Co(AA)₂–SnR₂Cl₂ (R=Ph, Et) , SnR₂Cl₂. SnR₂Cl₂.

     

Oxidative conversion of butane and pentane on superacid catalysts

Catalytic properties of AlBr₃, AlBr₃–CuCl₂ and AlBr₃–NiSO₄ in liquid-phase conversion of butane and pentane have been examined. A possibility for the oxidative condensation has been revealed due to both the stoichiometric reduction of Ni²⁺ and Cu²⁺ ions entering into the composition of superacid catalysts, and the catalytic oxidation in the presence of bromine as an oxidant. Nature of the centers responsible for the oxidative condensation of lower paraffins is discussed.

---

AlBr₃; AlBr₃–CuCl₂; AlBr₃–NiSO₄ . , Ni²⁺, Cu²⁺, , . , .

     

IR and thermal studies on lithium oxomolybdenum(VI) oxalate

A new molybdenum(VI) complex, Li₂[Mo₂O₆(C₂O₄)] · 2 H₂O (LMO), was prepared and characterized by chemical analysis and IR spectral studies. Its thermal decomposition was studied by using TG and DTA techniques. LMO loses its two moles of water between 75 and 170° to give the anhydrous product, which decomposes in three stages between 240 and 380°. The first two stages occur in the temperature ranges 240–280° and 280–305°, to give intermediates with the tentative compositions Li₆[Mo₆O₁₉(C₂O₄)₂] and Li₆[Mo₆O₂₀(C₂O₄)], respectively. In the third stage, which extends up to 380°, Li₆[Mo₆O₂₀(C₂O₄)] decomposes to give the end-product, Li₂Mo₂O₇.

---

Zusammenfassung Ein neuer Molybdän(VI)-Komplex der Formel Li₂[Mo₂O₆(C₂O₄)] · 2 H₂O (LMO) wurde dargestellt und durch chemische Analyse und IR-spektroskopisch charakterisiert. Die thermische Zersetzung dieses Komplexes wurde mittels TG und DTA untersucht. LMO verliert die zwei Wassermoleküle zwischen 75 und 170° unter Bildung des wasserfreien Produktes, das zwischen 240 und 380° in drei Stufen zersetzt wird. Die in den Temperaturbereich von 240–280° und 280–305° verlaufenden ersten zwei Reaktionsschritte ergeben Intermediäre der tentativen Zusammensetzung Li₆[Mo₆O₁₉(C₂O₄)₂] bzw. Li₆[Mo₆O₂₀(C₂O₄)]. In dem sich bis 380° erstreckenden dritten Reaktionsschritt wird Li₆[Mo₆O₂₀(C₂O₄)] unter Bildung des Endproduktes Li₂Mo₂O₇ zersetzt.

---

Li₂[MO₂O₆(C₂O₄] · 2 ₂ . . - 70–170° , , 240–380°. 240–280° 280–305° - Li₆[Mo₆O₁₉(C₂O₄)₂] Li₆[Mo₆O₂₀(C₂O₄)]. - 380° Li₂Mo₂O₇.

---

---

The authors are grateful to Prof. S. N. Tandon, Head of the Chemistry Department, for providing the research facilities.     

Effect of CO2 on O2 photo-adsorption on anatase

The presence of CO₂ on TiO₂ affects the process of oxygen photo-adsorption depending on the hydroxylation state of the surface. In dehydroxylated samples CO₂ blocks the formation of O ₃ ^– and O ₂ ^– . On H₂O₂/TiO₂ samples pretreated in the range of 150–200°C it leads to CO₂–O ₂ ^– species.

---

, Cu(II). . .

     

Reactivity of coordinated O2?, ion-radicals towards one-electron reductants

Using the flow ESR method, the rates of the reaction between the radical complex Ti(IV)(O ₂ ^– ) and one-electron reductants in aqueous solution have been measured. The redox potential for the Ti(IV) (O ₂ ^– )/Ti(IV) (O ₂ ^2– ) couple is about 1.7 V.

---

Ti(IV)(O ₂ ^– ) . - Ti(IV)(O ₂ ^– )/Ti(IV)(O ₂ ^2– ) 1,7 .

     

Effect of the medium on the oxidation of aliphatic monocarboxylic acids

Oxidation rates and k₂/k₆ ratios are given for some acids from propionic to lauric. The k₂/k₆ ratio is shown to be influenced by the electrostatic effect of the solvent. A linear dependence between the isodielectric values of k₂/k₆ and the number of methylene groups in the acid molecules is described.

---

k₂/k₆ . k₂/k₆ k₂/k₆ .