Formation of ordered self-assembled monolayers by adsorption of octylthiocyanates on Au(111)

Self-assembled monolayers (SAMs) were formed by the spontaneous adsorption of octythiocyanate (OTC) on Au(111) using both solution and ambient-pressure vapor deposition methods at room temperature and 50 degrees C. The surface structures and adsorption characteristics of the OTC SAMs on Au(111) were characterized by scanning tunneling microscopy (STM) and X-ray photoelectron spectroscopy (XPS). The STM observation showed that OTC SAMs formed in solution at room temperature have unique surface structures including the formation of ordered and disordered domains, vacancy islands, and structural defects. Moreover, we revealed for the first time that the adsorption of OTC on Au(111) in solution at 50 degrees C led to the formation of SAMs containing small ordered domains, whereas the SAMs formed by vapor deposition at 50 degrees C had long-range ordered domains, which can be described as (radical3 x 2 radical19)R5 degrees structures. XPS measurements of the peaks in the S 2p and N 1s regions for the OTC SAMs showed that vapor deposition is the more effective method as compared to solution deposition for obtaining high-quality SAMs by adsorption of OTC on gold. The results obtained will be very useful in understanding the SAM formation of organic thiocyanates on gold surfaces.     

Hierarchical chiral framework based on a rigid adamantane tripod on Au(111)

We have investigated the tripod-shaped bromo adamantane trithiol (BATT) molecule on Au(111) using scanning tunneling microscopy (STM) at 4.7 K. Adsorption of BATT leads to formation of highly ordered self-assembled monolayers (SAMs) with three-point contacts on Au(111). The structure of these SAMs has been found to have a two-tiered hierarchical chiral organization. The self-assembly of achiral monomers produces chiral trimers, which then act as the building blocks for chiral hexagonal supermolecules. SAMs begin to form from the racemic mixture of assembled molecules in ribbon-shaped islands, followed by the transformation to enantiomeric domains when SAM layers develop two-dimensionally across hcp domains. Such a chiral phase transition at the two-dimensional domain can arise from a subtle balance between molecule-substrate and intermolecular interactions. Two structural factors, the S atom (stabilization) and the methylene groups (chirality) located just above the S atom, induce the chiral ordering of BATT on Au(111).     

Effect of the phase states of self-assembled monolayers on pentacene growth and thin-film transistor characteristics

To investigate the effects of the phase state (ordered or disordered) of self-assembled monolayers (SAMs) on the growth mode of pentacene films and the performance of organic thin-film transistors (OTFTs), we deposited pentacene molecules on SAMs of octadecyltrichlorosilane (ODTS) with different alkyl-chain orientations at various substrate temperatures (30, 60, and 90 degrees C). We found that the SAM phase state played an important role in both cases. Pentacene films grown on relatively highly ordered SAMs were found to have a higher crystallinity and a better interconnectivity between the pentacene domains, which directly serves to enhance the field-effect mobility, than those grown on disordered SAMs. Furthermore, the differences in crystallinity and field-effect mobility between pentacene films grown on ordered and disordered substrates increased with increasing substrate temperature. These results can be possibly explained by (1) a quasi-epitaxy growth of the pentacene film on the ordered ODTS monolayer and (2) the temperature-dependent alkyl chain mobility of the ODTS monolayers.     

Mixed self-assembled monolayers of semirigid tetrahydro-4H-thiopyran end-capped oligo(cyclohexylidenes)

Single-component and mixed self-assembled monolayers (SAMs) of one- and three-ring semirigid tetrahydro-4H-thiopyran end-capped oligo(cyclohexylidenes)-that is, thiopyran (1), 4-(4-cyclohexylidene-cyclohexylidene)tetrahydro-4H-thiopyran (2), and 4-(tetrahydro-4H-thiopyran-4-cyclohexylidene-4'-ylidene)tetrahydro-4H-thiopyran (3)--on Au(111) substrates have been prepared and studied by cyclic voltammetry (CV), atomic force microscopy (AFM), and scanning tunneling microscopy (STM). It was found that the shortest adsorbate 1 more readily forms a SAM than 2 or 3. Notwithstanding, the SAMs of 2 or 3 are thermodynamically more stable due to favorable intermolecular attractions. Holes were made with the AFM tip establishing tilt angles of 30-50 degrees with respect to the surface normal for all SAMs. STM imaging showed well-ordered, line-shaped packing patterns with molecular resolution for the SAM of 2. Similar patterned structures were not observed for 1 and 3. Mixed SAMs were prepared by exposing a SAM of 1 to ethanol solutions of either 2 or 3. STM imaging revealed that domains of molecules of 2 or 3 amidst a monolayer of 1 are formed in both cases. Whereas in the mixed SAM of 1 and 2 the domains are irregularly shaped, circular islands of uniform size are found in the mixed SAM of 1 and 3.     

Self-assembled monolayers on Pt(111): molecular packing structure and strain effects observed by scanning tunneling microscopy

Self-assembled monolayers (SAMs) of octanethiol and benzeneethanethiol were deposited on clean Pt(111) surfaces in ultrahigh vacuum (UHV). Highly resolved images of these SAMs produced by an in situ scanning tunneling microscope (STM) showed that both systems organize into a super-structure mosaic of domains of locally ordered, closely packed molecules. Analysis of the STM images indicated a (square root 3 x square root 3)R30 degrees unit cell for the octanethiol SAMs and a 4(square root 3 x square root 3)R30 degrees periodicity based on 2 x 2 basic molecular packing for the benzeneethanethiol SAMs under the coverage conditions investigated. SAMs on Pt(111) exhibited differences in molecular packing and a lower density of disordered regions than SAMs on Au(111). Electron transport measurements were performed using scanning tunneling spectroscopy. Benzeneethanethiol/Pt(111) junctions exhibited a higher conductance than octanethiol/Pt(111) junctions.     

β-联碳酰基类衍生物有序自组装膜的STM研究

在大气条件下, 利用扫描隧道显微镜研究了四个β-联碳酰基类衍生物在高定向裂解石墨(HOPG)表面的自组装结构. 研究分子的结构中均包含π电子共轭体系和烷基链. 实验研究了分子结构对自组装结构的影响, 并利用分子结构的变化实现了自组装膜结构的调控. 结果表明, 在甲苯溶剂中制备的这些自组装结构均长程有序, 分子间氢键和偶极相互作用是影响自组装膜结构变化的重要因素.     

Time-dependent organization and wettability of decanethiol self-assembled monolayer on Au(111) investigated with STM

A detailed study on the time-dependent organization of a decanethiol self-assembled monolayer (SAM) at a designed solution concentration onto a Au(111) surface has been performed with scanning tunneling microscopy (STM). The SAMs were prepared by immersing Au(111) into an ethanol solution containing 1 microM decanethiol with different immersion times. STM images revealed the formation process and adlayer structure of the SAMs. It was found that the molecules self-organized into adlayers from random separation to a well-defined structure. From 10 s, small domains with ordered molecular organization appeared, although random molecules could be observed on Au(111) at the very initial stage. At 30 s, the SAM consisted of uniform short stripes. Each stripe consisted of sets of decanethiol mainly containing eight molecules. With the immersion time increasing, the length of the stripes increased. At 5 min, the alkyl chains overlapped each other between the adjacent stripes, indicating the start of a stacked process. After immersing Au(111) in decanethiol solution for 3 days, a densely packed adlayer with a (radical 3 x radical 3)R30 degrees structure was observed. The formation process and structure of decanethiol SAMs are well related to sample preparation conditions. The wettability of the decanethiolate SAM-modified Au(111) surface was also investigated.     

Adsorption and desorption processes of self-assembled monolayers studied by surface-sensitive microscopy and spectroscopy

Adsorption and desorption processes of self-assembled monolayers (SAMs) have been studied on an Au(111) surface by scanning tunnelling microscopy (STM), atomic force microscopy (AFM), X-ray photo-electron spectroscopy (XPS) and thermal desorption spectroscopy (TDS). At the initial growth stage, the ordered nucleation of SAM located at the herringbone turns of the Au(111) − (22 × √3) surface reconstruction and diffusion-controlled domain formation have been imaged by STM and AFM. Details of the oxidation process in UV desorption were also investigated by XPS. In addition, the dimerization reaction during desorption was confirmed by TDS for the first time in the alkanethiol SAM system.     

正十八烷醇在HOPG上形成自组装膜的吸附特性

研究了正十八烷醇在高定向热解石墨(HOPG)上形成自组装膜的吸附特性, 正十八烷醇在室温下从溶液中吸附至HOPG上形成整齐定向排列的单层自组装膜. 通过扫描隧道显微镜(STM)、接触角测量和X射线光电子能谱(XPS)分析了正十八烷醇单层自组装膜在HOPG上的结构. 实验结果表明, 正十八烷醇自组装膜在基底上成平铺或直立形态, 由于分子在基底上覆盖程度的不同, 会导致它在基底上排列的方式有所不同.     

喹啉衍生物自组装单分子膜的制备与结构

由于自组装单分子膜（SeifAssewhledMonolnyer,SAM）技术提供了在分子水平上构造理想界面的方便手段,而且所得到的膜具有优于传统m膜的均一性与稳定性,所以近年来SAM成为研究的热点．大量的研究工作表明SAM在润滑、防腐、催化老u蚀、电子转移反应研究、分子器件、非线性光学等众多领域都有广泛的应用前景［‘］．在以前的工作中我们曾报导了含酸胺键［’］、偶氮苯基团”,‘］等链内取代基的SAM的电化学与红外研究的结果,并采用化学力显微镜（CF）技术对末端为竣基的SAM进行了力滴定研究l’1．由于受合成等因素的制约,目前国…     

Studies on the effect of solvents on self-assembled monolayers formed from organophosphonic acids on indium tin oxide

The preparation of self-assembled monolayers (SAMs) of organophosphonic acids on indium tin oxide (ITO) surfaces from different solvents (triethylamine, ethyl ether, tetrahydofuran (THF), pyridine, acetone, methanol, acetonitrile, dimethyl sulfoxide (DMSO), or water) has been performed with some significant differences observed. Cyclic voltammetry (CV), X-ray photoelectron spectroscopy (XPS), scanning tunneling microscopy (STM), and contact angle measurement demonstrated that the quality of SAMs depends critically on the choice of solvents. Higher density, more stable monolayers were formed from solvents with low dielectric constants and weak interactions with the ITO. It was concluded low dielectric solvents that were inert to the ITO gave monolayers that were more stable with a higher density of surface bound molecules because higher dielectric constant solvents and solvents that coordinate with the surface disrupted SAM formation.     

Characterizing the molecular order of phosphonic acid self-assembled monolayers on indium tin oxide surfaces

Self-assembled monolayers (SAMs) of alkanephosphonic acids with chain lengths between 8 and 18 carbon units were formed on thin films of indium tin oxide (ITO) sputter-deposited on silicon substrates with 400 nm thermally grown SiO(2). The silicon substrates, while not intended for use in near-IR or visible optics applications, do provide smooth surfaces that permit systematic engineering of grain size and surface roughness as a function of the sputter pressure. Argon sputter pressures from 4 to 20 mTorr show systematic changes in surface morphology ranging from smooth, micrometer-sized grain structures to <50 nm grains with 3× higher surface roughness. Near-edge X-ray absorption fine structure (NEXAFS) spectroscopy experiments are conducted for alkanephosphonic acids deposited on these wide range of ITO surfaces to evaluate the effects of these morphological features on monolayer ordering. Results indicate that long-chain SAMs are more highly ordered, and have a smaller tilt angle, than short-chain SAMs. Surprisingly, the 1-octadecyl phosphonic acids maintain their order as the lateral grain dimensions of the ITO surface shrink to ～50 nm. It is only when the ITO surface roughness becomes greater than the SAM chain length (～15 ?) that SAMs are observed to become relatively disordered.     

Porphyrin self-assembly at electrochemical interfaces: role of potential modulated surface mobility

The self-assembly of 5,10,15,20-tetra(4-pyridyl)-21H,23H-porphine (TPyP) on Au(111) electrodes was investigated. The adlayer structure was found to depend on the electrode potential. At positive potentials (>0.5V(SCE)), a disordered layer of TPyP is formed on the Au(111) electrode. STM images showed that the disordered molecules are immobile. At negative potentials (-0.2V(SCE)), however, the molecules are highly mobile and can no longer be imaged by STM, though they remain on the surface. At intermediate potentials (-0.2 to +0.2V(SCE)), the TPyP formed a highly ordered adlayer. Once the ordered adlayer is formed, it persists even after the potential is stepped to higher values (0.5-0.8 V(SCE)). These results can be explained by the role of potential modulated adsorbate-substrate interaction and surface mobility. This suggests the intriguing prospect of using electrode potential to tune surface interactions and to drive surface processes, e.g., molecular self-assembly, in electrochemical systems.     

Physical structure of standing-up aromatic SAMs revealed by scanning tunneling microscopy

Long-range-ordered aromatic SAMs are formed on Au(111) using 4-nitrophenyl sulfenyl chloride as a precursor. Although the main structure is a √3 × √3 with a molecular density similar to that usually found for aliphatic SAMs, particular spots presenting specific shapes are also observed by STM. These include hexagons, partial hexagons, parallelograms, and zigzags resulting from specific arrangements of adsorbed molecules. These molecular arrangements are reversible as they form and dissociate or "vanish" in various areas on the surface. STM shows that these particular structures provide some order to their surrounding because areas void of these structures look less ordered. More interestingly, STM shows submolecular details of the molecules involved in forming these structures, hence providing direct experimental evidence for the ability of the STM to provide physical structure information of standing up SAMs. This is indeed a heavily debated question, and this work reports the first experimental example where submolecular physical structure is revealed by STM for standing-up SAMs.     

Control of alkanethiolate monolayer structure using vapor-phase annealing

We describe an annealing procedure for self-assembled monolayers (SAMs) that uses vapor-phase molecules to modify the local domain structure. Existing SAMs of decanethiolate on Au{111} were annealed using vapor-phase dodecanethiol molecules, so that the original and newly introduced molecules could be distinguished using scanning tunneling microscopy (STM). Molecules deposited from the vapor phase inserted at existing monolayer defect sites and domain boundaries, and at substrate step edges forming discrete network-like domains. The SAM molecular lattice can be preserved across molecular terrace boundaries between the decanethiolate and dodecanethiolate domains. Candidate molecular electronic component molecules were inserted from solution in the decanethiolate matrix as isolated molecules. These inserted molecules could then be surrounded by dodecanethiolate molecules introduced from the vapor phase, thus demonstrating a method for controlling the local environment of inserted molecules.     

Scanning tunneling microscopy of template-stripped Au surfaces and highly ordered self-assembled monolayers

Template stripping of Au films in ultrahigh vacuum (UHV) produces atomically flat and pristine surfaces that serve as substrates for highly ordered self-assembled monolayer (SAM) formation. Atomic resolution scanning tunneling microscopy of template-stripped (TS) Au stripped in UHV confirms that the stripping process produces a flat, predominantly 111 textured, atomically clean surface. Octanethiol SAMs vapor deposited in situ onto UHV TS Au show a c(4 x 2) superlattice with (square root 3 x square root 3) R30 degrees basic molecular structure having an ordered domain size up to 100 nm wide. These UHV results validate the TS Au surface as a simple, clean and high-quality surface preparation method for SAMs deposited from both vapor phase and solution phase.     

Formation of highly ordered and orientated gold islands: effect of immersion time on the molecular adlayer structure of pentafluorobenzenethiols (PFBT) SAMs on Au(111)

Self-assembled monolayers (SAMs) of pentafluorobenzenethiol (PFBT) on Au(111) substrates, prepared with different immersion times (ITs) at room temperature, were studied using scanning tunneling microscopy (STM) and infrared reflection-absorption spectroscopy (IRRAS). In the present study, the focus was on several important points of interest in the field of SAMs. First, the gold islands formed upon adsorption of PFBT molecules on the gold surface were monitored at different ITs in terms of their size, density, and shape. After short ITs (5 to 30 min), small gold islands with rounded shape were formed. These gold islands were arranged in a rather regular fashion and found to be quite mobile under the influence of the STM-tip during the scanning. When the IT was increased to 16 h, the results revealed the formation of highly ordered and orientated gold islands with very unusual shapes with straight edges meeting at 60° or 120° running preferentially along the [11(-)0] substrate directions. The density of the gold islands was found to decrease with increasing IT until they almost disappeared from the SAMs prepared after 190 h of IT. On top of the gold islands, the PFBT molecules were found to adopt the closely packed (10√3 × 2) structure. Second, a number of structural defects such as disordered regions at the domain boundaries and dark row(s) of molecules within the ordered domains of the PFBT SAMs were observed at different ITs. The SAMs prepared after 190 h of IT were found to be free of these defects. Third, at low and moderate ITs, a variation in the PFBT molecular contrast was observed. This contrast variation was found to depend mainly on the tunneling parameters. Finally, our results revealed that the organization process of PFBT SAMs is IT-dependent. Consequently, a series of structural phases, namely, α, β, γ, δ, and ε were found. The α-, β-, γ-, and δ-phases were typically accompanied by the ε-phase that appeared on top of gold islands. With increasing IT, the α→β→ γ→δ→ε phase transitions took place. The resulting ε-phase, which covered the entire gold surface after 190 h of IT, yielded well-ordered self-assembled monolayers with large domains having a (10√3 × 2) superlattice structure.     

Structure and electrochemistry of 4,4'-dithiodipyridine self-assembled monolayers in comparison with 4-mercaptopyridine self-assembled monolayers on Au(111)

4,4'-Dithiodipyridine (PySSPy) monolayers on Au(111) were investigated by cyclic voltammetry, X-ray photoelectron spectroscopy (XPS) and in situ scanning tunneling microscopy (STM). The studies were performed in solutions of different anions and pHs (0.1 M H2SO4, 0.1 M HClO4, 0.1 and 0.01 M Na2SO4, 0.1 and 0.01 M NaOH). The cyclic current-potential curves in H2SO4 show current peaks at about 0.4 V, which are absent for all other electrolytes at this potential. The XPS data suggest that PySSPy adsorbs via the S endgroup on the gold surface and the S-S bond breaks during adsorption. From the chemical shift of the N(ls) peak, it is concluded that in acidic media the self-assembled monolayer (SAM) is fully protonated, whereas in basic solution it is not. The pKa is estimated to be 5.3. STM studies reveal the existence of highly ordered superstructures for the SAM. In Na2SO4 and H2SO4, a (7 x mean square root of 3) structure is proposed. However, whereas in Na2SO4 solutions the superstructure does not change with potential, in 0.1 M H2SO4 the superstructure is observed only negative of the current peak at +0.4 V. At more positive potentials, the film becomes disordered. The results are compared to those for 4-mercaptopyridine (PyS) SAMs. XPS experiments and current-potential curves indicate that both molecules adsorb in the same manner on Au(111), that is, even in the case of PySSPy the adspecies is PyS. The STM results, however, call for a more subtle interpretation. While in Na2SO4 solutions the observed superstructures are the same for both SAMs, markedly different structures are found for PySSPy and PyS SAMs in 0.1 M H2SO4.     

Elucidation of the deposition processes and spatial structures of alkanethiol and arylthiol molecules adsorbed on Pt111 electrodes with in situ scanning tunneling microscopy

In situ scanning tunneling microscopy (STM) was used to examine the spatial structures of n-alkane thiols (1-hexanethiol, 1-nonanethiol, and 1-octahexanethiol) and arylthiols (benzenethiol and 4-hydroxybenzenethiol) adsorbed on well-ordered Pt111 electrodes in 0.1 M HClO4. The electrochemical potential and molecular flux were found to be the dominant factors in determining the growth mechanisms, final coverages, and spatial structures of these organic adlayers. Depending on the concentrations of the thiols, deposition of self-assembled monolayers (SAMs) followed either the nucleation-and-growth mechanism or the random fill-in mechanism. Low and high thiol concentrations respectively produced two ordered structures, (2 x 2) and (square root of 3 x square root of 3)R30 degrees , between 0.05 and 0.3 V. On average, an ordered domain spanned 500 A when the SAMs were made at 0.15 V, but this dimension shrank substantially once the potential was raised above 0.3 V. This potential-induced order-to-disorder phase transition resulted from a continuous deposition of thiols, preferentially at domain boundaries of (square root of 3 x square root of 3 x )R30 degrees arrays. All molecular adlayers were completely disordered by 0.6 V, and this restructuring event was irreversible with potential modulation. Since all thiols were arranged in a manner similar to that adopted by sulfur adatoms (Sung et al. J. Am. Chem. Soc. 1997, 119, 194), it is likely that they were adsorbed mainly through their sulfur headgroups in a tilted configuration, irrespective of the coverage. Both the sulfur and phenyl groups of benzenethiol admolecules gave rise to features with different corrugation heights in the molecular-resolution STM images. All thiols were adsorbed strongly enough that they remained intact at a potential as negative as -1.0 V in 0.1 M KOH.     

Polymerization of diacetylenes by hydrogen bond templated adlayer formation

Adlayers were formed on self-assembled monolayers (SAMs) formed by alkanethiols on gold. Base SAMs exposing amide functional groups at the SAM surface were formed with 12-mercaptododecanamide. Adlayers of diacetylene-containing monomers were then formed via amide hydrogen bonding in decalin and decalin/toluene mixtures. Grazing angle FTIR, contact angle measurements, and ellipsometry suggest that these adlayer films exhibit ordering and packing similar to that of SAMs on gold. Resonance Raman spectroscopy showed that these diacetylene adlayers could be readily polymerized by exposure to UV light.