Effect of silica nanoparticles on solid state polymerization of poly(ethylene terephthalate)

In the present study, the effect of silica nanoparticles, on the solid state polycondensation (SSP) kinetics of poly(ethylene terephthalate) (PET) is thoroughly investigated. At silica concentrations less than 1 wt% and reaction temperatures between 200 and 230 °C higher intrinsic viscosity (IV) values were measured, compared to neat PET at all reaction times. However, with 1 wt% of nanosilica (n-SiO₂), the IV increase of the nanocomposites was similar to that of neat PET and a further increase to 5 wt% n-SiO₂ resulted in significantly lower IV values. A simple kinetic model was also employed to predict the time evolution of IV, as well as the carboxyl and hydroxyl content during SSP. The kinetic parameters of the transesterification and esterification reactions were estimated at different temperatures with or without the addition of n-SiO₂. The activation energies of both reactions were determined together with the concentration of inactive end-groups. From the experimental measurements and the theoretical simulation results it was proved that n-SiO₂ in small amounts (less than 1 wt%) enhances both the esterification and transesterification reactions at all studied temperatures acting as a co-catalyst. However, as the amount of nanosilica increases a number of inactive hydroxyl groups were estimated corresponding to participation of these groups in side reactions with the nanosilica particles. These side reactions lead initially to branched PET chains and eventually (5 wt% n-SiO₂ concentration) to crosslinked structures.     

Residue depletion of albendazole and its metabolites in the muscle tissue of large mouth and hybrid striped bass after oral administration

The residue depletion profiles of albendazole (ABZ) and its major metabolites: albendazole sulfoxide (ABZ-SO), albendazole sulfone (ABZ-SO₂) and albendazole aminosulfone (ABZ-2-NH₂SO₂) were studied in the muscle tissues of large mouth (LMB) and hybrid striped bass (HSB). A single oral dose of 10 mg/kg albendazole was given to the two fish species via intra-gastric tube. The muscle tissues with adhering skin were collected at 8, 16, 24, 48, 72, 96 and 120 h post dose from both species. The samples were homogenized in dry ice and subjected to extraction and cleanup procedures. The final sample extracts were analyzed by high performance liquid chromatography. The results indicate that both ABZ and its pharmacologically active metabolite ABZ-SO were retained longer in LMB than in HSB after oral treatment. Albendazole was detectable until 8 h or 6.7 degree days (°D) and 48 h (40 °D) in HSB and LMB, respectively. However, ABZ-SO was detectable up to 48 h (40 °D) and 96 h (80 °D) in HSB and LMB, respectively. Among the inactive metabolites, ABZ-SO₂ was present in both fish species; however, ABZ-2-NH₂SO₂ was detected only in LMB.     

Titanium and zirconium complexes with novel phenoxy-phosphinimine ligands

A series of novel phenoxy-phosphinimine ligands (L): L = 2-(Ph₂PNR), 4, 6-(CMe₃)₂-C₆H₂OH [2, R = SiMe₃; 3, R = Ph] have been prepared in the yield of 65-71%. And bis(phenoxy-phosphinimide) group 4 complexes of the type L₂MCl₂ [4, M = Ti, R = SiMe₃; 5, M = Zr, R = SiMe₃; 6, M = Ti, R = Ph; 7, M = Zr, R = Ph] have been synthesized by the reaction of the ligands with TiCl₄ and ZrCl₄. The structure of complex 7 has been determined by X-ray crystallography. The complexes 4-7 showed inactive to ethylene polymerization in the presence of modified methylaluminoxane (MMAO) and i-Bu₃Al/Ph₃CB(C₆ F₅)₄. These results should be caused by overdoing the steric congestion around central metal.     

Synthesis,spectral characterization,electrochemical properties and antimicrobial screening of sulfur containing acylferrocenes

Several known and eight new sulfur containing acylferrocenes of the general formula FcCO(CH₂)_nSR (where Fc = ferrocenyl, n = 1 or 2 and R = alkyl, 4-bromobenzyl or 2,6-dichlorobenzyl group) were synthesized in order to test their in vitro antimicrobial activity against 11 bacterial and three fungal/yeast strains. It has been shown that only four of the 14 ketones are completely inactive at the tested dose, while the activities of the other ones were noteworthy. All new compounds were well characterized by IR and NMR spectral data, and their electrochemical properties were investigated by cyclic voltammetry. The X-ray crystal structures of two representative ketones are also presented.     

A general route for the synthesis of hydrido-carboxylate complexes of the type MH(CO)(κ-OCOR)(PPh3)2 [M = Ru,Os; R = CH3, CH2Cl,C6H5, CH(CH3)2] and their use as precatalysts for hydrogenation and hydroformylation reactions

The synthesis and solid-state IR, ¹H and ³¹P{¹H} NMR spectroscopic characterization of complexes of the type MH(CO)(κ³-OCOR)(PPh₃)₂ [M = Ru, Os; R = CH₃, CH₂Cl, C₆H₅ and CH(CH₃)₂] are reported in this paper. These compounds were obtained by reaction of the respective cationic complex [MH(CO)(NCMe)₂(PPh₃)₂]BF₄ with the sodium salt of the corresponding carboxylic acid in a 1:1 v/v dichloromethane/methanol solution at room temperature. The spectroscopic data of these complexes and some DFT calculations reveal an octahedral geometry with a bidentated carboxylate, two equivalent triphenylphosphines in a mutually trans positions, a linear hydride and a linear carbonyl both in the cis-positions of the coordination sphere. The catalytic results indicate that these complexes are efficient and regioselective precatalysts for the quinoline hydrogenation and for the hydroformylation of 1-hexene, under mild reaction conditions (130 °C and 4 atm H₂ and 120 °C and 15 atm H₂/CO, respectively). For benzothiophene hydrogenation, the osmium complexes showed low activities whereas the analogous ruthenium complexes were catalytically inactive under somewhat more drastic reaction conditions to those of the quinoline hydrogenation (140 °C and 10 atm H₂).     

Electrochemiluminescence from tris(2,2′-bipyridyl)ruthenium(II)-graphene-Nafion modified electrode

An electrochemiluminescence (ECL) sensor based on Ru(bpy)₃²⁺-graphene-Nafion composite film was developed. The graphene sheet was produced by chemical conversion of graphite, and was characterized by atomic force microscopy (AFM), scanning electron microscopy (SEM), and Raman spectroscopy. The introduction of conductive graphene into Nafion not only greatly facilitates the electron transfer of Ru(bpy)₃²⁺, but also dramatically improves the long-term stability of the sensor by inhibiting the migration of Ru(bpy)₃²⁺ into the electrochemically inactive hydrophobic region of Nafion. The ECL sensor gives a good linear range over 1 × 10⁻⁷ to 1 × 10⁻⁴ M with a detection limit of 50 nM towards the determination of tripropylamine (TPA), comparable to that obtained by Nafion-CNT. The ECL sensor keeps over 80% and 85% activity towards 0.1 mM TPA after being stored in air and in 0.1 M pH 7.5 phosphate buffer solution (PBS) for a month, respectively. The long-term stability of the modified electrode is better than electrodes modified with Nafion, Nafion-silica, Nafion-titania, or sol-gel films containing Ru(bpy)₃²⁺. Furthermore, the ECL sensor was successfully applied to the selective and sensitive determination of oxalate in urine samples.     

Perruthenate ion. Another metal oxo species able to promote the oxidative cyclisation of 1,5-dienes to 2,5-disubstituted cis-tetrahydrofurans

Perruthenate ion, from tetrapropylammonium perruthenate (TPAP), in the presence of tetrabutylammonium periodate (TBAPI) as reoxidant catalyses the stereospecific and stereoselective oxidative cyclisation of 1,5-dienes to cis-2,5-disubstituted tetrahydrofurans in good to moderate yields. NMO also works as co-oxidant in the process but is less effective and at least 0.7 equiv TPAP are required. Acidic conditions promote the formation of THF diols. 1,5-Dienes with two terminal double bonds give poor yields of THF’s or cleavage products.     

The formation of Lewis acid/base stabilised phosphanyltrielanes - A theoretical and experimental study

Theoretical investigations on the thermochemistry and the reaction mechanism of the formation of Lewis acid/base stabilised phosphanyltrielanes D · H₂EPH₂ · A (D = Lewis base, A = Lewis acid) were conducted. The reactions of EH₃ · D with A · PH₃ to form D · H₂EPH₂ · A and H₂ (E = B, Al, Ga; D = NH₃; A = BH₃, Cr(CO)₅) are all exothermic, regardless of whether donors and acceptors are present or absent. The lithium chloride elimination reactions between EH₂Cl · D and A · PH₂Li to give D · H₂EPH₂ · A and LiCl are endothermic for donor/acceptor stabilised compounds, if formation of gaseous LiCl is considered. If solid lithium chloride is considered all reactions are strongly exothermic. Studies of the transition state for H₂-elimination reactions between EH₃ · D and A · PH₃ to yield D · H₂EPH₂ · A and H₂ were only successful for E = Al, Ga. In these cases the reaction proceeds via a transition state featuring a five or six-coordinate group 13 element. Different donor molecules do not influence the activation energy of such H₂-elimination reactions, but nevertheless they have an effect on the reaction energy. The synthesis of the Cr(CO)₅ substituted phosphanyltrielanes [(CO)₅Cr(H₂PBH₂ · NMe₃)] (3a) and [(CO)₅Cr(H₂PAlH₂ · NMe₃)] (3b), as well as of the dinuclear complex [(CO)₈Cr₂(μ-HPBH₂ · NMe₃)₂] (4) are described, the latter as a subsequent reaction product of the photolysis of 3a. All compounds were characterised spectroscopically and by X-ray structure analysis.     

Photocytotoxic and anaerobic DNA cleavage activity of binuclear 3,3′-dithiodipropionic acid cobalt(II) complexes having phenanthroline bases

Dicobalt(II) complexes [{(B)Co^II}₂(μ-dtdp)₂] (1–3) of 3,3′-dithiodipropionic acid (dtdp) and phenanthroline bases (B), viz. 1,10-phenanthroline (phen in 1), dipyrido[3,2-d:2′,3′-f]quinoxaline (dpq in 2) and dipyrido[3,2-a:2′,3′-c]phenazine (dppz in 3), have been prepared, characterized and their photo-induced anaerobic DNA cleavage activity studied. The elemental analysis and mass spectral data suggest binuclear formulation of the complexes. The redox inactive complexes have magnetically non-interacting dicobalt(II) core showing magnetic moment of ∼3.9 μ_B per cobalt(II) center. The complexes show good binding propensity to calf thymus DNA giving K_b values within 4.3 × 10⁵–4.0 × 10⁶ M⁻¹. Thermal melting and viscosity data predict DNA groove binding and/or partial intercalative nature of the complexes. The complexes show significant anaerobic DNA cleavage activity in green light under argon atmosphere possibly involving radical species generated from the disulfide moiety in a type-I pathway. The DNA cleavage reaction under aerobic medium in green light is found to involve hydroxyl radical species. The dppz complex 3 exhibits significant photocytotoxicity in HeLa cervical cancer cells with an IC₅₀ value of 2.3 μM in UV-A light of 365 nm, while it is essentially non-toxic in dark giving an IC₅₀ value of >200 μM. A significant reduction of the dark toxicity of the organic dppz base (IC₅₀ = 8.3 μM in dark) is observed on binding to the cobalt(II) center while essentially retaining its photocytotoxicity in UV-A light (IC₅₀ = 0.4 μM).     

Direct electrocatalytic oxidation of nitric oxide and reduction of hydrogen peroxide based on α-Fe2O3 nanoparticles-chitosan composite

α-Fe₂O₃ nanoparticles prepared using a simple solution-combusting method have been dispersed in chitosan (CH) solution to fabricate nanocomposite film on glass carbon electrode (GCE). The as-prepared α-Fe₂O₃ nanoparticles were characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM). The nanocomposite film exhibits high electrocatalytic oxidation for nitric oxide (NO) and reduction for hydrogen peroxide (H₂O₂). The electrocatalytic oxidation peak is observed at +0.82 V (vs. Ag/AgCl) and controlled by diffusion process. The electrocatalytic reduction peak is observed at −0.45 V (vs. Ag/AgCl) and controlled by diffusion process. This α-Fe₂O₃-CH/GCE nanocomposite bioelectrode has response time of 5 s, linearity as 5.0 × 10⁻⁷ to 15.0 × 10⁻⁶ M of NO with a detection limit of 8.0 × 10⁻⁸ M and a sensitivity of −283.6 μA/mM. This α-Fe₂O₃-CH/GCE nanocomposite bioelectrode was further utilized in detection of H₂O₂ with a detection limit of 4.0 × 10⁻⁷ M, linearity as 1.0 × 10⁻⁶ to 44.0 × 10⁻⁶ M and with a sensitivity of 21.62 μA/mM. The shelf life of this bioelectrode is about 6 weeks under room temperature conditions.     

Titanium complexes with novel triaryl-substituted phosphinimide ligands: Synthesis, structure and ethylene polymerization behavior

A series of titanium phosphinimide complexes [Ph₂P(2-RO-C₆H₄)]₂TiCl₂ (7, R = CH₃; 8, R = CHMe₂) and [PhP(2-Me₂CHO-C₆H₄)][THF]TiCl₃ (9) have been prepared by reaction of TiCl₄ with the corresponding phosphinimines under dehalosilylation. The structure of complex 9 has been determined by X-ray crystallography, and a solvent molecule THF was found to be coordinated with the central metal and the Ti-O bond was consistent with the normal Ti-O (donor) bond length. The complexes 7 and 8 displayed inactive to ethylene polymerization, and the complex 9 displayed moderate activity in the presence of modified methylaluminoxane (MMAO) or i-Bu₃Al/Ph₃CB(C₆F₅)₄, and this should be partly attributed to coordination of THF with titanium and the steric effect of two iso-propoxyl. And catalytic activity up to 32.2 kg-PE/(mol-Ti h bar) was observed.     

Synthesis,characterization and bioactivity of mixed-ligand Cu(II) complexes containing Schiff bases derived from S-benzyldithiocarbazate and saccharinate ligand and the X-ray crystal structure of the copper-saccharinate complex containing S-benzyl-β-N-(acetylpyrid-2-yl)methylenedithiocarbazate

Mixed-ligand complexes of general formula, [Cu(NNS)(sac)] (NNS′ = S-benzyl-β-N-(2-acetylpyrid-2-yl)methylenedithiocarbazate, NNS″ = S-benzyl-β-N-(2-benzoylpyrid-2-yl)methylenedithiocarbazate and NNS? = S-benzyl-β-N-(6-methylpyrid-2-yl)methylenedithio-carbazate, sac = the saccharinate anion) have been synthesized by reacting [Cu(sac)₂(H₂O)₄] · 2H₂O with the appropriate ligands in ethanol and characterized by various physico-chemical techniques. Magnetic and spectral evidence indicate that the complexes are four-coordinate in which the Schiff bases coordinate as NNS ligands and the sac- anion coordinates as a unidentate N-donor ligand. An X-ray crystallographic structural analysis of [Cu(NNS′)(sac)] shows that the complex has a distorted square-planar geometry with the Schiff base coordinated to the copper (II) ion as a uninegatively charged tridentate chelating agent via the pyridine nitrogen atom, the azomethine nitrogen atom and the thiolate sulphur atom while the fourth coordination position is occupied by the N-bonded saccharinate anion. The complexes have been evaluated for their biological activities against selected pathogens and cancer cell lines. They display weak activity against the pathogenic bacteria and fungi. The complexes were highly active against the leukemic cell line (HL-60) but only [Cu(NNS′)(sac)] was found to exhibit strong cytotoxicity against the ovarian cancer cell line (Caov-3). All complexes were inactive against the breast cancer cell line (MCF-7).     

X-ray crystallographic structure and physical properties of the pentacoordinated [TPAFeCl] complex

A new pentacoordinated ferrous compound [TPAFeCl]⁺ (TPA = tris(2-pyridylmethyl)amine) was synthesized from the reaction between H₃TPA(ClO₄)₃ and Fe(PⁿPr₃)₂Cl₂ in MeCN. The unique trigonal bipyramidal [TPAFeCl]⁺ complex was characterized as a S = 2 high spin complex based on the crystallographic structure, magnetic susceptibility, ¹H NMR spectrum and semi-empirical ZINDO/S calculations. Crystal of [TPAFeCl]₂(FeCl₄)(MeCN)₂ was monoclinic with a = 12.019(2) Å, b = 27.550(5) Å, c = 14.138(2) Å, β = 94.168(3)°, V = 4668.9(13) Å³, space group C/c, and the unit cell contained a racemic mixture of Δ and Λ isomers with ferrous tetrachloride anion.     

Synthesis of neutral and cationic monocyclopentadienyl alkyl niobium and tantalum complexes

Compound [NbCp′Me₄] (Cp′ = η⁵-C₅H₄SiMe₃, 1) reacted with several ROH compounds (R = tBu, SiiPr₃, 2,6-Me₂C₆H₃) to give the derivatives [NbCp′Me₃(OR)] (R = tBu 2a, SiiPr₃2b, 2,6-Me₂C₆H₃2c). The diaryloxo tantalum compound [TaCp^∗Me₂(OR)₂] (Cp^∗ = η⁵-C₅Me₅, R = 2,6-Me₂C₆H₃3) was obtained by reaction of [TaCp^∗Cl₂Me₂] with 2 equiv of LiOR (R = 2,6-Me₂C₆H₃). Abstraction of one methyl group from these neutral compounds 1-3 with the Lewis acids E(C₆F₅)₃ (E = B, Al) gave the ionic derivatives [NbCp′Me₂X][MeE(C₆F₅)₃] (X = Me 4-E. X = OR; R = SiiPr₃5b-E, 2,6-Me₂C₆H₃5c-E. E = B, Al) and [TaCp^∗Me(OR)₂][MeE(C₆F₅)₃] (R = 2,6-Me₂C₆H₃6-E; E = B, Al). Polymerization of MMA with the aryloxoniobium compound 2c and Al(C₆F₅)₃ gave syndiotactic PMMA in a low yield, whereas the tetramethylniobium compound 1 and the diaryloxotantalum derivative 3 were inactive.     

New cationic palladium (II) and rhodium (I) complexes of [Ph2PCH2C(Ph)N(2,6-Me2C6H3)]

Treatment of the bulky iminophosphine ligand [Ph₂PCH₂C(Ph)N(2,6-Me₂C₆H₃)] (L) with [M(CH₃CN)₂(ligand)]⁺ⁿ, where for M = Pd(II): ligand = η³-allyl, n = 1, and for M = Rh(I), ligand: 2(C₂H₄), 2(CO) or cod, n = 0, yields the mono-cationic iminophosphine complexes [Pd(η³-C₃H₅)(L)][BF₄] (1), [Rh(cod)(L)][BF₄] (2), [Rh(CO)(CH₃CN)(L)][BF₄] (3), and cis-[Rh(L)₂][BF₄] (4). All the new complexes have been characterised by NMR spectroscopy and X-ray diffraction. Complex 1 shows moderate activity in the copolymerisation of CO and ethene but is inactive towards Heck coupling of 4-bromoacetophenone and n-butyl acrylate.     

Synthesis and structural characterization of metal complexes based on pyrazole/imidazolium chlorides

A series of imidzoalium salt, L · HCl, for the potentially bidentate pyrazole/N-heterocyclic carbene was synthesized. Reactions of a 2:1 mixture between L · HCl bearing bulky N-substitution and Ag₂O produced Ag(L)Cl, whereas a novel compound with unique stoichiometry AgL₂(AgCl)_0.5Cl was produced from L · HCl bearing N-methyl group under identical condition. Reactions of L · HCl with PdCl₂ produced zwitterionic Pd^IICl₃L · H. Selected structural determinations on L · HCl, Ag(L)Cl, AgL₂(AgCl)_0.5Cl, and Pd^IICl₃L · H revealed intriguing crystal chemistry in which the less-stable gauche rotamers were obtained exclusively. A preliminary application of the zwitterionic complexes, Pd^IICl₃L · H, in Heck coupling reaction of aryl bromide with n-butyl acrylate shows effective activity.     

Synthesis and structure of the monometallic cationic complex [Cp(CO)2Fe{η-(CH2CHCH2CH3)}]PF6 (Cp = η-C5H5)

The bimetallic carbocation complex [{Cp(CO)₂Fe}₂(μ-C₄H₇)]PF₆ reacted with trifluoroacetic acid to give the mononuclear cationic complex [Cp(CO)₂Fe{η²-(CH₂CHCH₂CH₃)}]PF₆, which formed yellow orthorhombic crystals in the space group P2₁2₁2₁ with a = 7.652(4), b = 13.422(7), c = 14.037(7); α = β = γ = 90.00 and Z = 4. The carbocation is coordinated to the metal in a η²-fashion forming a chiral metallacyclopropane type structure. The β-CH carbon (C9) is disordered over two positions (C9A and C9B), each having about 50% occupancy. This is attributed to there being both the R and S enantioface isomers in equal amounts in the crystal sample. NMR data indicate that the metallacyclopropane structure observed in the solid state is preserved in solution.     

Reverse atom transfer radical polymerisation (RATRP) of methacrylates using copper(I)/pyridinimine catalysts in conjunction with AIBN

N-n-Propyl-2-pyridylmethanimine, 1, N-n-octyl-2-pyridylmethanimine, 2, N-n-lauryl-2-pyridylmethanimine, 3, and N-n-octadecyl-2-pyridylmethanimine, 4 have been used in conjunction with copper(II) bromide and azo initiators for the reverse atom transfer radical polymerisation of a range of methacrylates. AIBN to Cu^IIBr₂ ratios of 0.5:1, 0.75:1 and 1:1 give PMMA with M_n 11 500 g mol⁻¹ (PDi = 1.24) (at 22% conversion), 12 500 g mol⁻¹ (PDi = 1.06) (at 83% conversion) and 10 900 g mol⁻¹ (PDi = 1.11) (at 84% conversion), respectively. A Cu^IIBr₂ complex is demonstrated to be needed at the start of the reaction for good control over molecular weight and polydispersity as reactions using Cu(I)Br as catalyst yielded PMMA of M_n 31 000 g mol⁻¹ (PDi = 2.90), reactions with no copper yield PMMA of M_n 33 000 g mol⁻¹ (PDi = 2.95). The RATRP of styrene was carried out using Cu^IIBr₂ as catalyst. AIBN to Cu^IIBr₂ ratio of 0.5:1, 0.75:1 and 1:1 gave PS with M_n = 12 400 g mol⁻¹ (PDi = 1.27) at low conversion, M_n = 15 500 g mol⁻¹ (PDi = 1.11) and 12 400 g mol⁻¹ (PDi = 1.38), respectively at ∼85% conversion. A series of block copolymers of MMA with BMA, BzMA and DMEAMA (15 600 g mol⁻¹ (PDi = 1.18), 13 300 g mol⁻¹ (PDi = 1.14) 15 300 g mol⁻¹ (PDi) = 1.16), using a PMMA macroinitiator were prepared. Emulsion polymerisation of MMA using [initiator]:[Cu^(II)Br₂] ratio = 0.5:1 with Brij surfactant gave a linear increase of M_n with respect to conversion, final M_n = 112 800 g mol⁻¹ (PDi = 1.42). Further reactions were carried out with [initiator]:[Cu^(II)Br₂] ratio = 0.75:1 and 1:1. Both giving PMMA with M_n ∼ 32 000 g mol⁻¹ (PDi ∼ 2.4). These reactions exhibit no control, this is because the azo initiator is present in excess and all of the monomer is consumed by a free radical polymerisation as opposed to a controlled reaction. Particle size analysis (DLS) showed the particle size between 160 and170 nm in all cases.     

Preparation and characterization of Prussian blue nanowire array and bioapplication for glucose biosensing

Prussian blue nanowire array (PBNWA) was prepared via electrochemical deposition with polycarbonate membrane template for effective modification of glassy carbon electrode. The PBNWA electrode thus obtained was demonstrated to have high-catalytic activity for the electrochemical reduction of hydrogen peroxide in neutral media. This enabled the PBNWA electrode to show rapid response to H₂O₂ at a low potential of −0.1 V over a wide range of concentrations from 1 × 10⁻⁷ M to 5 × 10⁻² M with a high sensitivity of 183 μA mM⁻¹ cm⁻². Such a low-working potential also substantially improved the selectivity of the PBNWA electrode against most electroactive species such as ascorbic acid and uric acid in physiological media. A detection limit of 5 × 10⁻⁸ M was obtained using the PBNWA electrode for H₂O₂, which compared favorably with most electroanalysis procedures for H₂O₂. A biosensor toward glucose was then constructed with the PBNWA electrode as the basic electrode by crosslinking glucose oxidase (GOx). The glucose biosensor allowed rapid, selective and sensitive determination of glucose at −0.1 V. The amperometric response exhibited a linear correlation to glucose concentration through an expanded range from 2 × 10⁻⁶ M to 1 × 10⁻² M, and the response time and detection limit were determined to be 3 s and 1 μM, respectively.     

Determination of 36 elements in plant reference materials with different Si contents by inductively coupled plasma mass spectrometry: comparison of microwave digestions assisted by three types of digestion mixtures

Closed-vessel microwave digestion of nine standard reference plant materials (NIST, BCR, IAEA) and a laboratory standard of plant material with different Si contents assisted by HNO₃ + H₂O₂ (procedure A), HNO₃ + H₂O₂ + HF + H₃BO₃ (procedure B) and HNO₃ + H₂O₂ + HBF₄ (procedure C) were used to determine the recovery of 36 elements by ICP-MS: Ag, Al, As, Ba, Be, Bi, Cd, Ce, Co, Cr, Cs, Cu, Fe, Ga, Ge, In, La, Li, Mn, Mo, Nd, Ni, Pb, Pr, Rb, Sb, Se, Sn, Sr, Th, Tl, U, V, W, Y, Zn. Additions of HF + H₃BO₃ and HBF₄ in procedures B and C exceeded by 10% (B1, C1) and 100% (B2, C2) the equivalent concentrations of Si in the samples determined by ICP-OES. Most recoveries of certified elements (e.g., Al^*, Cu, Mo^*, Rb^*, Sb^*, Th) decreased significantly (^*p ≤ 0.05) with increasing Si content in plant reference materials digested by procedure A, while the recoveries from procedures B and C decreased insignificantly only for Mo and Sb. Digestions B and C gave significantly higher recoveries of Al, Sb, W and REEs, which were tighter to the reference values of these elements. A similar effect was found for Cu, Fe, Li, Ni, Sn, Th, Tl, V, Zn, Ba, Rb and Sr recoveries in samples with Si contents exceeding 2000 μg g⁻¹. If the Si content in plant samples is less than 10 mg g⁻¹, digestion of 0.5 g of plant samples through 0.05 mL of HF and 0.5 mL of 4% H₃BO₃ or 0.1 mL of HBF₄ is recommended to get satisfactory results for most of the elements. For materials with Si content exceeding 10 mg g⁻¹ the weight of the sample for digestion should be reduced to 0.25 g. However, the operation of potential interferences should be taken into account and eliminated through correction equations and adequate dilution of the samples.