SYNTHESIS AND PROPERTIES OF COPOLYMERS FROM 1-[3,5-BIS(TRIMETHYLSILYL)PHENYL]-2-PHENYLACETYLENE

Copolymerization of 1-[3,5-bis(trimethylsilyl)phenyl]-2-phenylacetylene (m,m-(Me₃Si)₂DPA) with other diphenylacetylene derivatives and their copolymer properties were investigated. Homopolymerization of m,m-(Me₃Si)₂DPA by TaCl₅─n-Bu₄Sn (1:2) did not give the polymer due to steric hindrance. However, m,m-(Me₃Si)2DPA copolymerized with diphenylacetylene (DPA), 1-phenyl-2-[p-(trimethylsilyl)phenyl]acetylene (p-Me₃Si DPA), and 1-phenyl-2-[m-(trimethylsilyl)phenyl]acety-lene (m-Me₃SiDPA) in the presence of TaCl₅─n-Bu₄Sn at various feed ratios to give copolymers in moderate yields. The formed copolymers were yellow to orange solids, which were soluble in common organic solvents such as toluene and CHCl₃. The highest weight-average molecular weights (M_w) of these copolymers reached ca. 6 × 105 and tough films could be obtained by solution casting. Their onset temperatures of weight loss in air were observed around 400°C, indicating high thermal stability. The oxygen permeability coefficients at 25°C of copoly(m,m-(Me₃Si)₂ DPA/DPA) (feed ratio 1:1) and copoly(m,m-(Me₃Si)₂DPA/p-Me₃SiDPA) (feed ratio 1:2) were 21 and 100 barrers, respectively, medium in magnitude among polymers from substituted acetylenes.     

Syntheses,Crystal Structures and Properties of the Tetrametaphosphimates MII2(PO2NH)4 · 8 H2O with MII = Mg,Mn, Co and Zn

Mg₂(PO₂NH)₄ · 8 H₂O ( 1 ), Mn₂(PO₂NH)₄ · 8 H₂O ( 2 ), Co₂(PO₂NH)₄ · 8 H₂O ( 3 ) and Zn₂(PO₂NH)₄ · 8 H₂O ( 4 ) were obtained as microcrystalline powders by combining aqueous solutions of K₄(PO₂NH)₄ · 4 H₂O and MX₂ · y H₂O (M = Mg, Mn, Co, Zn; X = Cl, NO₃). Single crystals were obtained by crystallization in gelatine gels in U‐tubes or test‐tubes. 2 and 4 were characterized by thermogravimetry and 4 was additionally characterized by temperature dependend in situ powder diffractometry. The structures of 1 , 2 , 3 and 4 were found to be isotypic and were solved by single‐crystal X‐ray methods: P 2₁/c, Z = 2 ( 1 : a = 645.4(2), b = 1050.1(2), c = 1283.3(3) pm, β = 104.66(3)°; 2 : a = 648.7(2), b = 1063.1(2), c = 1310.8(3) pm, β = 103.93(3)°; 3 : a = 643.3(2), b = 1049.0(2), c = 1286.7(3) pm, β = 104.28(3)°; 4 : a = 644.18(5), b = 1049.22(7), c = 1282.43(8) pm, β = 104.122(6)°). The structure is composed of MO₆ octahedra and (PO₂NH)₄^4— anions. The P₄N₄ rings of the (PO₂NH)₄^4— anions exhibit a slightly distorted chair conformation, which is supported by IR data and has been described by torsion angles, Displacement Asymmetry Parameters and Puckering Parameters. Via M²⁺ ions and hydrogen bonds, the tetrametaphosphimate anions are connected forming layers perpendicular to [100]. These layers are connected by hydrogen bonds.     

Novel coordination compounds of quinic acid. X-ray diffraction study of copper(II) complexes where the metal ion was a chiral centre

Summary The synthesis and characterization of the following coordination compounds derived from quinic acid (quin) (1): [Cu(quin)Cl(H₂O)]_n·(H₂O)_n(2); [Ni(quin)Cl(H₂O)]_n·(2H₂O) n (3); [Co(quin) Cl(H₂O)]_n·(2H₂O)_n(4); [Cu(quin) (NO₃)(H₂O)]_n·(2H₂O)_n(5); [Cu(quin)(AcO)(H₂O)]_n· (2H₂O)_n(6); [Cu(quin)H₂O]₂·2H₂O(7); [Co(quin)₂]_n (8); [Zn(quin)₂](9); [Cd(quin)₂](10) and [Hg(quin)₂]· 4H₂O (11) is presented. All of the compounds were characterized by i.r. and u.v. spectroscopy; in addition, (9) and (10) were analysed by n.m.r., and (2), (5) and (7) by X-ray crystallography. Due to the polyfunctionality of quinic acid diverse structures were obtained: (2) –(6) and (8) were polymeric, (7) was dimeric and (9) –(11) were spiranic. In compound (2) the Cu had a distorted octahedral structure; it was a chiral centre with six different substituents and an optically active ligand. Only one stereoisomer (OC-6-25-A) of the 30 possible was observed in the crystal. Compound (5) was also polymeric, the hexacoordinated Cu atom was a chiral centre (OC-6-53C) and only one stereoisomer was observed. It was bonded to three quinic acid ligands in three different coordination modes and each quinic acid was in turn bonded to three different Cu atoms. Each chain was linked to another two chains giving a net structure. Compound (7) was a dimer with two square pyramidal Cu atoms. Two apical water molecules were found in acis arrangement. Each quinic acid ligand was bonded to two Cu atoms which were linked by two oxygen bridges and each Cu atom was bonded to two quinic acid moieties.     

Preparation and thermal properties of asymmetrically substituted poly(silylenemethylene)s

Poly(silylenemethylene)s of the types [SiMeRCH₂]_n and [SiHRCH₂]_n were prepared by the ring-opening polymerization (ROP) of 1,3-disilacyclobutanes (DSCBs) containing n-alkyl substituents, such as C₂H₅, n-C₃H₇, n-C₄H₉, n-C₅H₁₁, and n-C₆H₁₃, or a phenyl group on the Si. These new polymers include a monosilicon analog of poly(styrene), [SiHPhCH₂]_n. Improved synthesis routes to the DSCB monomers were developed which proceed through Grignard ring closure reactions on alkoxy-substituted chlorocarbosilanes. All of these asymmetrically substituted polymers were obtained in high molecular weight form, except for [SiHPhCH₂]_n. The configurations of all of the polymers were found to be atactic. The aryl-substituted polymers have higher glass transition temperatures (T_gs) and thermal stability than those of the alkyl-substituted poly(silylenemethylene)s. Unlike the polyolefins of the type [C(H)(R)CH₂]_n, where T_g drops continuously from R = Me to n-Hex, the T_gs of the n-C_nH_2n+1 (n = 2–6)-substituted [SiMeRCH₂]_n PSM's appear to reach a maximum (at −61°C) for the R = n-Pr-substituted polymer. Moreover, where it was possible to make direct comparisons among similarly substituted atactic polymers, all of the poly(silylenemethylene)s were found to have lower T_gs than their all-carbon analogs. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3193–3205, 1997     

Beiträge zur Chemie des Phosphors. 123. Synthese und Eigenschaften der Diphosphagermirane (t-BuP)2GePh2 und (t-BuP)2GeEt2

Contributions to the Chemistry of Phosphorus. 123. Synthesis and Properties of the Diphosphagermiranes (t-BuP)₂GePh₂ and (t-BuP)₂GeEt₂ The first three-membered P₂Ge heterocycles, 1,2-di-tert-butyl-3, 3-diphenyl-1, 2, 3-diphosphagermirane, (t-BuP)₂GePh₂ (1) , and 1, 2-di-tert-butyl-3, 3-diethyl-1, 2, 3-diphosphagermirane, (t-BuP)₂GeEt₂ (2) , were synthesized by [2+1] cyclocondensation reactions of K(t-Bu)P—P(t-Bu)K with diphenylgermanium dichloride and diethylgermanium dichloride, respectively. The four-, five-, and six-membered cyclogermaphosphanes (t-BuP)₂(GePh₂)₂ (3) , (t-BuP)₃GeR₂ ( 6 R = Ph; 7 R = Et), (t-BuP)₄GePh₂ (5) and (t-BuP)₄(GePh₂)₂ (4) as well as (t-BuP)₄ are formed as by-products. The diphosphagermiranes 1 and 2 could be isolated in 93 and 100% purity, respectively, and were unambiguously characterized as compounds with a cyclic P₂Ge skeleton. The ³¹P-NMR parameters of the cyclogermaphosphanes 3—7 are reported.     

三嵌段共聚物PAN-b-PEG-b-PAN的合成及其自组装行为的研究

利用原子转移自由基聚合(ATRP)制得了分子量可控、分子量分布窄的聚丙烯腈-b-聚乙二醇-b-聚丙烯腈P(AN-b-PEG-b-PAN)嵌段共聚物. 通过¹H NMR, FTIR, 凝胶渗透色谱(GPC)对所得产物的结构和分子量进行了表征并通过TG和DTA考察了该嵌段共聚物的热稳定性; 运用透射电子显微镜(TEM)、荧光探针技术和动态光散射(DLS)研究了P(AN)₂₇-b-P(EG)₄₅-b-P(AN)₂₇在溶剂水中胶束的形成、结构、形貌和胶束粒径. 结果表明, 三嵌段共聚物P(AN)₂₇-b-P(EG)₄₅-b-P(AN)₂₇的热稳定性较纯聚乙二醇P(EG)好, 且柔性链PEG的引入对嵌段共聚物的放热峰位置没有显著的影响. 当改变此嵌段共聚物溶液浓度时, 该嵌段共聚物会自组装成不同形状的胶束, DLS测量的胶束粒径大于TEM观察的结果, 其临界胶束浓度(cmc)约为4.46×10^－4 g•L^－1.     

Magnetically separable CoFe2O4/CoxFey/activated carbon composites for Cd(II) removal from wastewater

CoFe₂O₄ and Co_x Fe_y were anchored into activated carbon (AC) to synthesize CoFe₂O₄/Co_x Fe_y /AC composites using the sol–gel method for Cd(II) adsorption from wastewater. The results indicated that CoFe₂O₄ and Co_x Fe_y nanoparticles existed in the pores of AC. The magnetic properties of CoFe₂O₄/Co_x Fe_y /AC indicated it could be separated and retrieved easily using an external magnet after Cd(II) adsorption. The effects of solution pH, temperature and initial Cd(II) concentration on the Cd(II) adsorption of AC and CoFe₂O₄/Co_x Fe_y /AC were investigated. The standard free energy, enthalpy change and entropy change were evaluated. The kinetic parameters of Langmuir and Freundlich isothermal equation were analyzed, and the Freundlich kinetic model was feasible for describing the Cd(II) adsorption process of CoFe₂O₄/Co_x Fe_y /AC composites.     

The Binding Affinity of Fe(III) to Aspartic Acid and Glutamic Acid Monohydroxamates

The solution spectra of Fe(III) complexes with aspartic acid (ASX) and glutamic acid (GLX) monohydroxamates were analyzed in the UV-Vis region for different complex species using STAR-94 programs in the pH range ¨ 1.0-4.0, at ionic strength (I) of 0.15 M NaCl and T = 25°C. Several monomeric complex species were obtained including some mixed hydroxo species. The reaction kinetics of the Fe(III)-(ASX or GLX) systems were carried out at I = 0.15 M NaCl and T = 25°C in the time range of the stopped-flow method. The pseudofirst-order rate constants were pH as well as T _L (analytic concentration of ASX or GLX) dependent, i.e. k _obs,i = A_i + B _i T_L (at a given pH _i ) where A_i and B_i are pH-dependent parameters.     

Coordination of di- and triimine ligands at ruthenium(II) and ruthenium(III) centers: structural,electrochemical and radical scavenging studies

Herein, we explore the coordination of di- and triimine chelators at ruthenium(II) and ruthenium(III) centers. The reactions of 2,6-bis-((4-tetrahydropyranimino)methyl)pyridine (thppy), N¹,N²-bis((3-chromone)methylene)benzene-1,2-diamine (chb), and tris-((1H-pyrrol-2-ylmethylene)ethane)amine (H₃pym) with trans-[Ru^IICl₂(PPh₃)₃] afforded the diamagnetic ruthenium(II) complex cis-[RuCl₂(thppy)(PPh₃)] (1) and the paramagnetic complexes [mer-Ru₂(μ-chb)Cl₆(PPh₃)₂] (2), and [Ru(pym)] (3), respectively. The complexes were characterized by IR, NMR, and UV–vis spectroscopy and molar conductivity measurements. The structures were confirmed by single crystal X-ray diffraction studies. The redox properties of the metal complexes were probed via cyclic- and squarewave voltammetry. Finally, the radical scavenging capabilities of the metal complexes towards the NO and 2,2-di(4-tert-octylphenyl)-1-picrylhydrazyl (DPPH) radicals were investigated     

A DFT study of proton transfers for the reaction of phenol and hydroxyl radical leading to dihydroxybenzene and H2O in the water cluster

Reactions of phenol and hydroxyl radical were studied under the aqueous environment to investigate the antioxidant characters of phenolic compounds. M06‐2X/6‐311 + G(d,p) calculations were carried out, where proton transfers via water molecules were examined carefully. Stepwise paths from phenol + OH^• + (H₂O)_n (n = 3, 7, and 12) to the phenoxyl radical (Ph O^•) via dihydroxycyclohexadienyl radicals (ipso, ortho, meta, and para OH‐adducts) were obtained. In those paths, the water dimer was computed to participate in the bond interchange along hydrogen bonds. The concerted path corresponding to the hydrogen atom transfer (HAT, apparently Ph OH + OH^• → Ph O^• + H₂O) was found. In the path, the hydroxyl radical located on the ipso carbon undergoes the charge transfer to prompt the proton (not hydrogen) transfer. While the present new mechanism is similar to the sequential proton loss electron transfer (SPLET) one, the former is of the concerted character. Tautomerization reactions of ortho or para (OH)C₆H₅=O + (H₂O)_n → C₆H₄(OH)₂(H₂O)_n were traced with n = 2, 3, 4, and 14. The n = 3 (and n = 14) model of ortho and para was calculated to be most likely by the strain‐less hydrogen‐bond circuit.     

Rare earth metal-rich indides RE 4IrIn ( RE = Gd–Er), RE 4IrInO0.25 ( RE = Gd, Er), and RE 4 T In1– x Mg x ( RE = Y, Gd; T = Rh, Ir)

The rare earth-transition metal-indides RE ₄IrIn (RE = Gd–Er) and the solid solutions RE ₄ TIn_1–x Mg _x (RE = Y, Gd; T = Rh, Ir) were prepared by arc-melting of the elements and subsequent annealing. The rare earth sesquioxides were used as oxygen source for the suboxides RE ₄IrInO_0.25 (RE = Gd, Er). Single crystals of the indides were grown via slowly cooling of the samples and they were investigated via X-ray powder diffraction and single crystal diffractometer data: Gd₄RhIn type, F [`4]\bar 4 3m, a = 1372.3(6) pm for Gd₄IrIn, a = 1365.3(6) pm for Tb₄IrIn, a = 1356.7(4) pm for Dy₄IrIn, a = 1353.9(4) pm for Ho₄IrIn, a = 1344.1(4) pm for Er₄IrIn, a = 1370.3(5) pm for Y₄RhIn_0.54Mg_0.46, a = 1375.6(5) pm for Gd₄IrIn_0.55Mg_0.45, a = 1373.0(3) pm for Gd₄IrInO_0.25, and a = 1345.1(4) pm for Er₄IrInO_0.25. The rhodium and iridium atoms have a trigonal prismatic rare earth coordination. Condensation of the RhRE ₆ and IrRE ₆ prisms leads to three-dimensional networks which leave voids that are filled by regular In₄ or mixed In_4–x Mg _x tetrahedra. The indium (magnesium) atoms have twelve nearest neighbors (3In(Mg) + 9RE) in icosahedral coordination. The rare earth atoms build up a three-dimensional, adamantane-like network of condensed, edge and face-sharing octahedra. For Gd₄IrInO_0.25 and Er₄IrInO_0.25 the RE1₆ octahedra are filled with oxygen. The crystal chemical peculiarities of these rare earth rich compounds are discussed.     

Iron‐catalyzed living radical polymerization of acrylates: Iodide‐based initiating systems and block and random copolymerizations

A half‐metallocene iron iodide complex [Fe(Cp)I(CO)₂] induced living radical polymerization of methyl acrylate (MA) in conjunction with an iodide initiator [(CH₃)₂C(CO₂Et)I, 1 ] and Al(Oi‐Pr)₃ to give polymers of controlled molecular weights and narrow molecular weight distributions (MWDs) (M_w/M_n < 1.2). With the use of chloride and bromide initiators, the MWDs were broader, whereas the molecular weights were similarly controlled. Other acrylates such as n‐butyl acrylate (nBA) and tert‐butyl acrylate (tBA) can be polymerized with 1 /Fe(Cp)I(CO)₂ in the presence of Ti(Oi‐Pr)₄ and Al(Oi‐Pr)₃, respectively, to give living polymers. The 1 /Fe(Cp)I(CO)₂ initiating system is applicable for the synthesis of block and random copolymers of acrylates (MA, nBA, and tBA) and styrene of controlled molecular weights and narrow MWDs (M_w/M_n = 1.2–1.3). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2033–2043, 2002     

Complexes of Oxorhenium(V) with Aromatic 2-Amino-Alcohols

Monooxo complexes of rhenium(V) with 2-aminophenol and some of its derivatives (H₂nod), containing the N,O donor-atom set, have been synthesized. Square-pyramidal complexes [ReO(nod)₂]^? were isolated by reaction with (n-Bu₄N) [ReOCl₄] in ethanol. In benzene the neutral species [ReOCL(Hnod)₂] were obtained. In the presence of hydrochloric acid in ethanol, the anionic complexes (n-Bu₄N) [ReOCl₃(Hnod)] were produced. Trans-[ReOCl₃(PPh₃)₂] was also reacted with some of the H₂nod ligands to yield [ReOCL₂(Hnod)(PPh₃]. The crystal structure of [ReOCl₂(Hmap)(PPh₃)] (H₂map = 2-aminobenzylalcohol) was determined; crystals are monoclinic, P2₁/n, with a = 15.065(6), b = 11.253(7), c = 15.850(7) Å, β = 94.27(4)°, U = 2680(2) &Aringsup3; and Z = 4. The structure was solved by the Patterson method and refined by full-matrix least-squares techniques to R = 0.042. The monoanionic Hmap^? ligand is coordinated as a bidentate through a neutral amino nitrogen and an anionic alcoholate oxygen atom, with the latter trans to the oxo group.     

Two New Disulfated Triterpenoids from Zygophyllum fabago

From the aerial parts of Zygophyllum fabago, two new monosodium salts of sulfated derivatives of ursolic acid, along with two known quinovic acid glycosides were isolated. The structures of the new compounds were determined as (3β,4α)‐3,23,30‐trihydroxyurs‐20‐en‐28‐al 3,23‐di(sulfate) sodium salt (1 : 1) ( 1 ) and of (3β,4α)‐3,23,28‐trihydroxyurs‐20‐en‐30‐yl β‐D ‐glucopyranoside 3,23‐di(sulfate) sodium salt (1 : 1) ( 2 ) with the molecular formula C₃₀H₄₇NaO₁₀S₂ and C₃₆H₅₉NaO₁₅S₂, respectively. The structures of the known compounds were 3‐O‐(2‐O‐sulfo‐β‐D ‐quinovopyranosyl)quinovic acid 28‐β‐D ‐glucopyranosyl ester ( 3 ) and 3‐O‐(β‐D ‐glucopyranosyl)quinovic acid 28‐β‐D ‐glucopyranosyl ester ( 4 ) (quinovic acid=(3β)‐3‐hydroxyurs‐12‐ene‐27,28‐dioic acid). The structures of all these compounds were determined by using 1D‐ and 2D‐NMR spectroscopic techniques.     

ThSi2 Type Ytterbium Disilicide and its Analogues YbTxSi2–x (T = Cr,Fe, Co)

YbSi₂ and the derivatives YbT_xSi_2–x (T = Cr, Fe, Co) crystallizing in the α‐ThSi₂ structure type were obtained as single crystals from reactions run in liquid indium. All silicides were investigated by single‐crystal X‐ray diffraction, I4₁/amd space group and the lattice constants are: a = 3.9868(6) Å and c = 13.541(3) Å for YbSi₂, a = 4.0123(6) Å and c = 13.542(3) Å for YbCr_0.27Si_1.73, a = 4.0142(6) Å and c = 13.830(3) Å for YbCr_0.71Si_1.29, a = 4.0080(6) Å and c = 13.751(3) Å for YbFe_0.34Si_1.66, and a = 4.0036(6) Å, c = 13.707(3) Å for YbCo_0.21Si_1.79. YbSi₂ and YbT_xSi_2–x compounds are polar intermetallics with three‐dimensional Si and M (T+Si) polyanion sub‐networks, respectively, filled with ytterbium atoms. The degree of substitution of transition metal at the silicon site is signficant and leads to changes in the average bond lengths and bond angles substantially.     

M[B(CN)4]2: Zwei neue Tetracyanoborate mit zweiwertigen Kationen (M = Zn,Cu)

M[B(CN)₄]₂: Two new Tetracyanoborate Compounds with divalent Cations (M = Zn, Cu) The reaction of ZnO or CuO with [H₃O][B(CN)₄] in aqueous solution yielded single crystals of Zn[B(CN)₄]₂ and Cu[B(CN)₄]₂, respectively. The compounds were characterized by single‐crystal X‐ray diffraction. Zn[B(CN)₄]₂ ( (no. 164), a = b = 7.5092(9) Å, c = 6.0159(6) Å, Z = 1) crystallizes isotypic with Hg[B(CN)₄]₂. The structure of Cu[B(CN)₄]₂ (C2/m (no. 12), a = 13.185(3) Å, b = 7.2919(9) Å, c = 6.029(1) Å, β = 93.02(2)°, Z = 2) can be considered as a super‐structure, resulting from Jahn‐Teller distortion of the Cu²⁺ ions. Magnetic measurements were performed for the copper compound. Vibrational spectra and thermal stabilities were compared with the known mercury(II) tetracyanoborate.     

Trisphosphine‐Chelate‐Substituted Molybdenum and Tungsten Nitrosyl Hydrides as Highly Active Catalysts for Olefin Hydrogenations

Reaction of [M(NO)Cl₃(NCMe)₂] (M=Mo, W) with (iPr₂PCH₂CH₂)₂PPh (etpⁱp) at room temperature afforded the syn/anti‐[M(NO)Cl₃(mer‐etpⁱp)] complexes (M=Mo, a ; W, b ; 3 a,b (syn,anti); syn and anti refer to the relative position of Ph(etpⁱp) and NO). Reduction of 3 a,b (syn,anti) produced [M(NO)Cl₂(mer‐etpⁱp)] ( 4 a,b (syn)), [M(NO)Cl(NCMe)(mer‐etpⁱp)] ( 5 a,b (syn,anti)), and [M(NO)Cl(η²‐ethylene)(mer‐etpⁱp)] ( 6 a,b (syn,anti)) complexes. The hydrides [M(NO)H(η²‐ethylene)(mer‐etpⁱp)] ( 7 a,b (syn,anti)) were obtained from 6 a,b (syn,anti) using NaHBEt₃ (75 °C, THF) or LiBH₄ (80 °C, Et₃N), respectively. 7 a,b (syn,anti) were probed in olefin hydrogenations in the absence or presence of a hydrosilane/B(C₆F₅)₃ mixture. The 7 a,b (syn,anti)/Et₃SiH/B(C₆F₅)₃ co‐catalytic systems were highly active in various olefin hydrogenations (60 bar H₂, 140 °C), with maximum TOFs of 5250 h^?1 ( 7 a (syn,anti)) and 8200 h^?1 ( 7 b (syn,anti)) for 1‐hexene hydrogenation. The Et₃SiH/(B(C₆F₅)₃ co‐catalyst is anticipated to generate a [Et₃Si]⁺ cation attaching to the O_NO atom. This facilitates NO bending and accelerates catalysis by providing a vacant site. Inverse DKIE effects were observed for the 7 a (syn,anti)/Et₃SiH/(B(C₆F₅)₃ (k_H/k_D=0.55) and the 7 b (syn,anti)/Et₃SiH/(B(C₆F₅)₃ (k_H/k_D=0.65) co‐catalytic mixtures (20 bar H₂/D₂, 140 °C).     

Synthesis,characterization, and antimicrobial activities of two mononuclear metal(II) complexes with (Z)-3-hydroxy-4-(3-hydroxy-3-phenylacryloyl)phenyl benzoate

Two mononuclear complexes with a β-diketone ligand (Z)-3-hydroxy-4-(3-hydroxy-3-phenylacryloyl)phenyl benzoate (L), [CoL₂(CH₃CH₂OH)₂] (1), and [MnL₂(CH₃CH₂OH)₂] (2) were prepared. Both complexes were characterized by X-ray crystallography, confirming that the central metal(II) are coordinated by four oxygens from two L and two oxygens from two ethanols. Both complexes were assayed for in vitro antibacterial (Bacillus subtilis, Staphylococcus aureus, Streptococcus faecalis, Pseudomonas aeruginosa, Escherichia coli, and Enterobacter cloacae) activities and showed better antimicrobial activity against Gram positive strains than Gram negative strains.     

Synthesis and crystal structure of inclusion compounds: Trans-9,10-dihydro-9,10-ethanoanthracene-11,12-dicarboxylic acid with boric acid and tetrabutylammonium salt

Two new inclusion compounds (n-C₄H₉)₄N⁺C₁₈-H₁₃O₄ ⁻·B(OH)₃ (1) and (n-C₄H₉)₄N⁺C₁₈H₁₃O₄ ⁻ (2) were prepared and characterized by X-ray crystallography. Crystal data: compound 1, monoclinic P2(1)/c, a = 1.569 9(1) nm, b = 0.995 5(6) nm, c = 2.293 3(1) nm, β = 109.962(3)°, Z = 4, and R ₁ = 0.0434, wR = 0.075 9; compound 2, monoclinic C2/c, a = 1.400 5(3) nm, b = 1,282 1(2) nm, c = 1.765 7(3) nm, β = 100.388(1)°, Z = 4, and R ₁ = 0.0584, wR = 0.096 6. In the crystal structure of 1, the tetramers formed by two trans-9,10-dihydro-9,10-ethanoanthracene-11,12-dicarboxylic acid (EADA) anions and two boric acid molecules were connected through O—H⋯O hydrogen bonds to generate a channel type host lattice. The tetra-n-butylammonium cations were stacked to give two columns within each channel with cross-sectional size of about 2.30 nm × 0.93 nm. In the crystal structure of 2, similar honeycomb host lattices with big size were also formed along the [101] direction by three-dimensional accumulation of EADA anions. The tetra-n-butylammonium cations were accommodated in a zigzag fashion within each channel. Translated from Acta Chimica Sinica, 2006, 64(18): 1904–1910 [译自: 化学学报]     

Zn(II) and Cu(II) unsymmetrical formamidine complexes as effective initiators for ring‐opening polymerization of cyclic esters

A series of Zn(II) and Cu(II) complexes were synthesized using unsymmetrical N,N′‐ diarylformamidine ligands, i.e. N‐(2‐methoxyphenyl)‐N′‐2,6‐dichorophenyl)‐formamidine ( L1 ), N‐(2‐methoxyphenyl)‐N′‐phenyl)‐formamidine ( L2 ), N‐(2‐methoxyphenyl)‐N′‐(2,6‐dimethylphenyl)‐formamidine ( L3 ) and N‐(2‐methoxyphenyl)‐N′‐(2,6‐diisopropylphenyl)‐formamidine ( L4 ). The complexes, [Zn₂( L1 )₂(OAc)₄] ( 1) , [Zn₂( L2 )₂(OAc)₄] ( 2 ), [Zn₂( L3 )₂(OAc)₄] ( 3 ), [Zn₂( L4 )₂(OAc)₄] ( 4 ), [Cu₂( L1 )₂(OAc)₄] ( 5 ), [Cu₂( L2 )₂(OAc)₄] ( 6 ), [Cu₂( L3 )₂(OAc)₄] ( 7 ) and [Cu₂( L4 )₂(OAc)₄] ( 8 ), were prepared via a mechanochemical method with excellent yields between 95 ‐ 98% by reacting the metal acetates and corresponding ligands. Structural studies showed that both complexes are dimeric with a paddlewheel core structure in which the separation between the two metal centres are 2.9898 (8) and 2.6653 (7) Å in complexes 3 and 7 , respectively. Complexes 1 – 8 were used in ring‐opening polymerization of ε‐caprolactone (ε‐CL) and rac‐lactide (rac‐LA). Zn(II) complexes were more active than Cu(II) complexes, with complex 1 bearing electron withdrawing chloro groups being the most active (k_app = 0.0803 h^‐1). Low molecular weight poly‐(ε‐CL) and poly‐(rac‐LA) ranging from 1720 to 6042 g mol^‐1, with broad molecular weight distribution (PDIs, 1.78 – 1.87) were obtained. Complex 2 gave reaction orders of 0.56 and 1.52 with respect to ε‐CL and rac‐LA, respectively.