Morphology and thermal properties of polyhedral oligomeric silsesquioxane/polybutadiene nanocomposites prepared by anionic polymerization

The morphology and thermal properties of Allylisobutyl Polyhedral Oligomeric Silsesquioxane (POSS)/Polybutadiene (PB) nanocomposites prepared through anionic polymerization technique were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The results of XRD, SEM and TEM showed that the aggregation of POSS in PB matrix occurred obviously, forming crystalline domains and the size of POSS particles increased with increasing POSS content. The DSC and TGA results indicated that the glass transition temperature (T _g) of the nanocomposites was significantly increased and the maximum degradation temperature (T _dmax) of nanocomposites was slightly increased compared with pure PB, implying an increase in thermal stability.     

Thermal and dynamic mechanical properties of epoxy resin/poly(urethane‐imide)/polyhedral oligomeric silsesquioxane nanocomposites

Linear isocyanate‐terminated poly(urethane‐imide) (PUI) with combination of the advantages of polyurethane and polyimide was directly synthesized by the reaction between polyurethane prepolymer and pyromellitic dianhydride (PMDA). Then octaaminophenyl polyhedral oligomeric silsesquioxane (OapPOSS) and PUI were incorporated into the epoxy resin (EP) to prepare a series of EP/PUI/POSS organic–inorganic nanocomposites for the purpose of simultaneously improving the heat resistance and toughness of the epoxy resin. Their thermal degradation behavior, dynamic mechanical properties, and morphology were studied with thermal gravimetric analysis (TGA), dynamic mechanical analysis (DMA), and transmission electron microscope (TEM). The results showed that the thermal stability and mechanical modulus was greatly improved with the addition of PUI and POSS. Moreover, the EP/PUI/POSS nanocomposites had lower glass transition temperatures. The TEM results revealed that POSS molecules could self assemble into strip domain which could switch to uniform dispersion with increasing the content of POSS. All the results could be ascribed to synergistic effect of PUI and POSS on the epoxy resin matrix. Copyright © 2010 John Wiley & Sons, Ltd.     

Preparation and properties of polycarbonate/polyhedral oligomeric silsesquioxanes (POSS) hybrid composites

Octaphenylsilsesquioxane (PH‐POSS) and octa(γ‐methacryloxypropyl)silsesquioxane (MA‐POSS) were successfully synthesized by hydrolytic condensation of phenyltrichlorosilane and γ‐methacryloxypropyltrimethoxysilane, and characterized by Fourier transform infrared (FT‐IR), ¹H and ²⁹Si nuclear magnetic resonance (NMR), and matrix‐assisted laser desorption/ionization‐time of flight (MALDI‐TOF) mass spectrum. Morphology, degradation behavior, thermal, and mechanical properties of hybrid composites were studied by transmission electron microscopy (TEM), polarized optical microscopy (POM), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), surface contact angle (SCA), tensile, and impact testing. Domains of PH‐POSS and MA‐POSS dispersed in the matrix with a wide size distribution in a range of 0.1–0.5 µm, while PH‐POSS exhibited a preferential dispersion. Because of the possible homopolymerization of MA‐POSS during the melt blending, the glass transition temperature of polycarbonate (PC)/MA‐POSS composites remained nearly unchanged with respect to PC/PH‐POSS composites that showed a depression of T_g due to the plasticization effect. It is interesting to note that the incorporation of POSS retarded the degradation rates of PC composites and thus significantly improved the thermal stabilities. Si? O fractions left during POSS degradations were a key factor governing the formation of a gel network layer on the exterior surface. This layer possessed more compact structures, higher thermal stabilities, and some thermal insulation. In addition, percentage residues at 700°C (C₇₀₀) significantly increased from 10.8% to 15.8–22.1% in air. Fracture stress of two composites showed a slight improvement, and the impact strength of them decreased monotonically with the increase of POSS loading. Copyright © 2011 John Wiley & Sons, Ltd.     

Synthesis,morphology, and properties of hydroxyl terminated‐POSS/polyimide low‐k nanocomposite films

Polyhedral oligomeric silsequioxane (POSS), having eight hydroxyl groups for the preparation of nanocomposites with polyimide (PI) was synthesized by the direct hydrosilylation of allyl alcohol with octasilsesquioxane (Q₈M₈^H) with platinum divinyltetramethyl disiloxane Pt(dvs) as a catalyst. The structure of allyl alcohol terminated‐POSS (POSS‐OH) was confirmed by FTIR, NMR, and XRD. A high performance, low‐k PI nanocomposite from pyromellitic dianhydride (PMDA)‐4,4'‐oxydianiline (ODA) polyamic acid cured with POSS‐OH was also successfully synthesized. The incorporation of POSS‐OH into PI matrix reduced dielectric constant of PI without loosing mechanical properties. Furthermore, the effects of POSS‐OH on the morphology and properties of the PI/POSS‐OH nanocomposites were investigated using UV–vis, FTIR, XRD, SEM, AFM, transmission electron microscope (TEM), TGA, and contact angle. The homogeneous dispersion of POSS particles was confirmed by SEM, AFM, and TEM. The nanoindentation showed that the modulus increased upon increasing the concentration of POSS‐OH in PI, whereas the hardness did not increase very much with respect to loading of POSS, due to soft‐interphase around POSS molecules in the resulting nanocomposites. Overall results demonstrated the nanometer‐level integration of the polymer and POSS‐OH. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5887–5896, 2008     

Synthesis and Characterization of Monofunctionalized Polyhedral Oligomeric Silsesquioxanes by Cohydrolytic and Cocondensation of Propyltrimethoxysilane and Vinyltrimethoxysilane

A monofunctional POSS [Si₈O₁₂(CH?CH₂)(C₃H₇)₇] was synthesized by the cohydrolysis and cocondensation of propyltrimethoxysilane and vinyltrimethoxysilane in methanol solvent under acidic conditions. Then, the structure of the product was investigated using FT-IR, ¹H-NMR, ²⁹Si-NMR and XRD. Experimental results indicated that the mole rate of propyls and vinyls attached on POSS was approximately 7:1, which was controlled through altering the ratio of two monomers. Furthermore, the TGA result also showed a rapid mass loss began at temperature over 218°C due to the degradation or sublimation of POSS itself. The new method, in comparison with the conventional corner-capping method, offered us another simple and effective access to preparing this kind of monofunctional POSS.     

Continuous and gradual photo-activation methods: influence on degree of conversion and crosslink density of composite resins

Thermal properties and degree of conversion (DC%) of two composite resins (microhybrid and nanocomposite) and two photo-activation methods (continuous and gradual) displayed by the light-emitting diode (LED) light-curing units (LCUs) were investigated in this study. Differential scanning calorimetry (DSC) thermal analysis technique was used to investigate the glass transition temperature (T _g) and degradation temperature. The DC% was determined by Fourier transform infrared spectroscopy (FT-IR). The results showed that the microhybrid composite resin presented the highest T _g and degradation temperature values, i.e., the best thermal stability. Gradual photo-activation methods showed higher or similar T _g and degradation temperature values when compared to continuous method. The Elipar Freelight 2^TM LCU showed the lowest T _g values. With respect to the DC%, the photo-activation method did not influence the final conversion of composite resins. However, Elipar Freelight 2^TM LCU and microhybrid resin showed the lowest DC% values. Thus, the presented results suggest that gradual method photo-activation with LED LCUs provides adequate degree of conversion without promoting changes in the polymer chain of composite resins. However, the thermal properties and final conversion of composite resins can be influenced by the kind of composite resin and LCU.     

Synthesis,morphology, and viscoelastic properties of cyanate ester/polyhedral oligomeric silsesquioxane nanocomposites

Cyanate ester (PT‐15, Lonza Corp) composites containing the inorganic–organic hybrid polyhedral oligomeric silsesquioxane (POSS) octaaminophenyl(T₈)POSS [ 1 ; (C₆H₄NH₂)₈(SiO_1.5)₈] were synthesized. These PT‐15/POSS‐ 1 composites (99/1, 97/3, and 95/5 w/w) were characterized by X‐ray diffraction (XRD), transmission election microscopy (TEM), dynamic mechanical thermal analysis, solvent extraction, and Fourier transform infrared. The glass‐transition temperatures (T_g's) of the composite with 1 wt % 1 increased sharply versus the neat PT‐15, but 3 and 5 wt % 1 in these cyanate ester composites depressed T_g. All the PT‐15/POSS composites exhibited higher storage modulus (E′) values (temperature > T_g) than the parent resin, but these values decreased from 1 to 5 wt % POSS. The loss factor peak intensities decreased and their widths broadened upon the incorporation of POSS. XRD, TEM, and IR data were all consistent with the molecular dispersion of 1 due to the chemical bonding of the octaamino POSS‐ 1 macromer into the continuous cyanate ester network phase. The amino groups of 1 reacted with cyanate ester functions at lower temperatures than those at which cyanate ester curing by cyclotrimerization occurred. In contrast to 1 , 3‐cyanopropylheptacyclopentyl(T₈)POSS [ 2 ; (C₅H₉)₇(SiO_1.5)₈CH₂CH₂CH₂CN] had low solubility in PT‐15 and did not react with the resin below or at the cure temperature. Thus, phase‐separated aggregates of 2 were found in samples containing 1–10 wt % 2 . Nevertheless, the T_g and E′ values (temperature > 285 °C) of these composites increased regularly with an increase in 2 . © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3887–3898, 2005     

Curing kinetics,thermal, mechanical,and dielectric properties based on o‐cresol formaldehyde epoxy resin with polyhedral oligomeric (N‐aminoethyl‐γ‐amino propyl)silsesquioxane

The curing reaction and kinetics of o‐cresol formaldehyde epoxy resin (o‐CFER) with polyhedral oligomeric silsesquioxane of N‐aminoethyl‐γ‐amino propyl group (AEAP‐POSS) were investigated by differential scanning calorimetry (DSC). The thermal, mechanical, and dielectric properties of o‐CFER/AEAP‐POSS nanocomposites were investigated with thermogravimetric analysis (TGA), torsional braid analysis (TBA), tensile tester, impact tester, and electric analyzer, respectively. The results show that the activation energy (E) of curing reaction is 58.08 kJ/mol, and the curing reaction well followed the ?esták‐Berggren (S‐B) autocatalytic model. The glass transition temperature (T_g) increases with the increase in AEAP‐POSS content, and reaches the maximum, 107°C, when the molar ratio (N_s) of amino group to epoxy group is 0.5. The nanocomposites containing a higher percentage of AEAP‐POSS exhibited a higher thermostability. The AEAP‐POSS can effectively increase the mechanical properties of epoxy resin, and the tensile and impact strengths are 2.84 MPa and 143.25 kJ m^?2, respectively, when N_s is 0.5. The dielectric constant (ε), dielectric loss factor (tan δ), volume resistivity (ρ_v), and surface resistivity (ρ_s) are 4.98, 3.11 × 10^?4, 3.17 × 10¹² Ω cm³, and 1.41 × 10¹² Ω cm², respectively, similarly at N_s 0.5. Copyright © 2009 John Wiley & Sons, Ltd.     

Preparation of novel hybrid nanomaterials based on LaFeO3 and phosphotungstic acid as a highly efficient magnetic photocatalyst for the degradation of methylene blue dye solution

Novel magnetic hybrid nanomaterials 1 (LaFeO₃.Fe₃O₄@SiO₂-NH₂/PW₁₂) were synthesized by supporting phosphotungstic acid (H₃PW₁₂O₄₀; PW₁₂) on LaFeO₃.Fe₃O₄ nanomaterials through sono-assisted method. The synthesized nanomaterials were fully characterized by using FT-IR, XRD, UV–vis, BET-BJH, VSM, SEM, and TEM analyses. FT-IR, XRD, and UV–vis confirmed successful synthesis of nanomaterials. The SEM and TEM images revealed spherical morphology with core-shell structure for hybrid nanomaterials 1 . VSM results confirmed the magnetic property of hybrid nanomaterials 1 and suggested it as easily recyclable photocatalyst for removal of organic dyes from aqueous solution. The photocatalytic activity of hybrid nanomaterials 1 has been studied over the degradation of methylene blue (MB) and methyl orange (MO) solution under UV–vis light irradiation. Importantly the hybrid nanomaterials 1 showed outstanding degradation efficiency for MB solution in comparison with bare LaFeO₃.Fe₃O₄ and PW₁₂. The photocatalytic activity was enhanced mainly due to the high efficiency in separation of electron–hole pairs induced by the remarkable synergistic effects of LaFeO₃.Fe₃O₄ and PW₁₂ semiconductors. After the photocatalytic reaction, the nanocomposite can be easily separated from the reaction solution and reused several times without loss of its photocatalytic activity. Trapping experiments indicated that hole (h_VB⁺) and ^•OH radicals were the main reactive species for dye degradation in the present photocatalytic system. On the basis of the experimental results and estimated band gaps, the mechanism for the enhanced photocatalytic activity was proposed.     

X-ray structure of host-guest nanosized organotin supramolecular coordination polymer based on cobalt cyanide and quinoxaline as an efficient catalyst for treatment of waste water

New host-guest supramolecular coordination polymer catalyst ³_∞[Co(μ²CN)₅(CN)(μ²-Me₃Sn)₂(Me₃Sn)(H₂O)(qox)], SCP1 (qox = quinoxaline) has been synthesized and characterized by single crystal X-ray diffraction, FT-IR, UV/Visible and fluorescence spectra, thermal and elemental analyses. The tin atoms act as bridges connecting the Co (CN)₆ building blocks. The structure of SCP1 exhibits an unusual self-coordinated host-guest 3D network with qox as guest molecule. Also, the nanosized1^\ was prepared under ultrasonic irradiation while the morphological features of both were examined by TEM and SEM. SCP1 and nanosized1^\ are used as heterogeneous catalysts for removal of toxic dyes under UV and ultrasonic irradiation. The results show high effectively decolorized of indigo carmine dye (IC) without generation of any hazardous wastes or byproducts. The reaction is first order with respect to IC, while the factors affecting the rate constant of the degradation reaction are investigated. Mineralization of IC was investigated by IR and UV spectra. The trapping experiments were carried out to determine the role of active species used for degradation of the dye. The activation parameters of the reaction have been estimated and a possible mechanism of degradation was proposed and discussed in detail.     

A kinetic study of the thermal and thermal oxidative degradations of new bridged POSS/PS nanocomposites

The thermal degradation of a series of three novel bridged polyhedral oligomeric silsesquioxanes (POSS)/polystyrene (PS) nanocomposites, at different POSS content (3%, 5% and 10%), was studied in both inert (flowing nitrogen) and oxidative (static air) atmospheres, in order to investigate the effects of this new dumbbell-shaped structure on the filler–polymer interaction and then on the thermal stability of the obtained materials. Nanocomposites were synthesized by in situ polymerization of styrene in the presence of POSS which has not polymerizable groups, aiming to obtain well dispersed POSS/PS systems. The actual filler concentration in the obtained nanocomposites was checked by ¹H NMR spectroscopy. Scanning electron microscopy (SEM) and FTIR spectroscopy evidenced the presence of filler–polymer interactions. Degradations were carried out into a thermobalance, in the scanning mode, at various heating rates, and the characteristic parameters of thermal stability, namely temperature at 5% mass loss (T₅%) and the activation energy (E_a) of degradation, of the various nanocomposites were determined. The results were discussed and interpreted.     

Silicone-enriched surface of immersed polyurethane-POSS antifouling coating

Abstract

A series of waterborne polyurethane-polyhedral oligomeric silsesquioxane (WBPU-POSS) dispersions were synthesized. Different POSS contents were used to evaluate the effect of POSS content on silicone enrichment under both nonimmersed and immersed conditions. The impact of silicone enrichment under immersed conditions on antifouling properties was also evaluated. The structure of the WBPU-POSS coating was identified by FT-IR and ²⁹Si-NMR. X-ray photoelectron spectroscopy (XPS) analysis confirmed a silicone-enriched surface with a certain composition of the WBPU-POSS coating under both nonimmersed and immersed conditions. The mechanical properties, hydrophilicity and hydrolytic degradation of the coating all varied with POSS content. The long-term antifouling performance of immersed coatings depends on surface silicone enrichment, which was found to be above 0.0021?mole POSS content in WBPU-POSS coatings.     

Synthesis and characterization of a novel arylacetylene oligomer containing POSS units in main chains

A novel arylacetylene oligomer containing octamethyl POSS units in main chains was prepared from difluoride octamethyl POSS (diexo-(CH₃)₈Si₈O₁₁F₂) and diethynylbenzene (DEB) by Grignard reaction and characterized by FT-IR, NMR, WAXD, GPC, DSC, and TGA. The curing reaction kinetic of the oligomer was studied by Kissinger and Ozawa methods and the kinetic parameters were obtained. The cured polymer had good thermal and thermal-oxidative properties. TGA analyses demonstrated that the thermal decomposition temperature (T_d5) of the cured polymer in nitrogen and air were 503 and 479 °C, respectively.     

Flame retardant epoxy composites with epoxy‐containing polyhedral oligomeric silsesquioxanes

A kind of polyhedral oligomeric silsesquioxanes (POSS) containing the propoxyl‐epoxy and phenyl groups (pr‐ep‐Ph‐POSS) was synthesized via hydrolytic condensation reaction. Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance spectroscopy, and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry identified the structure of the pr‐ep‐Ph‐POSS, including major caged Si₆O₉ (T6), Si₁₀O₁₅ (T10), Si₁₂O₁₈ (T12), etc. The pr‐ep‐Ph‐POSS was applied into the epoxy resin to achieve EP/pr‐ep‐Ph‐POSS composites. Thermogravimetric analysis indicated that EP/pr‐ep‐Ph‐POSS showed excellent thermal properties than pure EP. The fire behaviors of EP/pr‐ep‐Ph‐POSS composites were evaluated based on the cone calorimetry, limiting oxygen index (LOI), UL‐94 vertical burning test, and smoke density test. The smoke density decreased by ~30%, the LOI value reached to 26.4%, dripping was inhibited, and the peak of heat release rate decreased by ~62%. X‐ray photoelectron spectroscopy analysis and FTIR indicated that protective‐barrier effect is the main flame‐retardant mode of action for pr‐ep‐Ph‐POSS, due to the formation of the Si‐O‐Si, Si‐O‐C, and Si‐C condensed phase, which improve the thermal stability, strength, and integrity of the char layer.     

Facile synthesis of a boronate affinity sorbent from mesoporous nanomagnetic polyhedral oligomeric silsesquioxanes composite and its application for enrichment of catecholamines in human urine

A boronate-decorated nanomagnetic organic-inorganic hybrid material was facilely synthesized by utilizing the nanomagnetic polyhedral oligomeric silsesquioxanes (POSS) composite (Fe₃O₄@POSS) as the base platform. A simple copolymerization occurred between 3-acrylamidophenylboronic acid (AAPBA) and the residual end vinyl groups supplied by the substrate. Here the special emphasis was placed on the octavinyl POSS, which not only acted as the building blocks for a hybrid architecture but also facilitated the process of grafting boronate groups onto the surface of POSS based nanomagnetic composite (Fe₃O₄@POSS). The successful immobilization of affinity ligand-AAPBA on the Fe₃O₄@POSS was confirmed by Fourier transform infrared (FT-IR), elemental analysis, inductively coupled plasma atomic emission spectrometer (ICP-AES), field emission scanning electron microscope. A magnetic solid-phase extraction (MSPE) for cis-diols enrichment was developed using the as-prepared Fe₃O₄@POSS-AAPBA material as an affinity sorbent and three catecholamines (CAs), namely noradrenaline, epinephrine and isoprenaline, as model analytes. Under the optimal extraction conditions, sensitive and simultaneous analysis of three CAs from the urine sample was achieved by high-performance liquid chromatography with UV detection (HPLC-UV). The limits of detection (LOD, S/N = 3) and the limits of quantitation (LOQ, S/N = 10) for the target analytes were 0.81–1.32 ng mL⁻¹ and 2.70–4.40 ng mL⁻¹, respectively. Also good recoveries (85.5–101.7%) and repeatability (RSD≤10.1%) were obtained by this method. This work not only showed a facility for the utilization of Fe₃O₄@POSS as a substrate for constructing a boronate functionalized nanomagnetic sorbent, but also demonstrated the capability of the derived material for recognition of trace amount of cis-diols biomolecules presented in complicated biological matrices.     

Green synthesis of activated carbon doped tungsten trioxide photocatalysts using leaf of basil (Ocimum basilicum) for photocatalytic degradation of methylene blue under sunlight

Tungsten oxide (WO₃) nanoparticles were prepared hydrothermally by basil leaves extract, and Activated Carbon (AC) was prepared by the carbonization of date pits. Moreover, 1, 2 and 3% of AC doped WO₃ nanoparticles have been fabricated under hydrothermal conditions. The obtained samples have been characterized by using different techniques such as x-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), simultaneous thermogravimetric analysis (TG-DTGA), fourier transform infrared (FT-IR), BET surface area, and Ultra-Violet spectroscopy (UV–Vis). It was observed that band-gap energy of the fabricated materials decreases by increasing AC amount. Similarly, BET surface area and porosity results showed increasing the content of AC, surface area, pore size and pore volume were decreased. The functional groups, determined by FT-IR, played a significant role in the photocatalytic performance. The photocatalytic performance of fabricated samples was used for the degradation of methylene blue (MB) at neutral pH under visible light radiations, and it is observed that WO₃/3%AC photocatalyst showed the highest degradation of MB. Both, capped phytochemicals of basil extract and the nanocomposites, were improved the photocatalytic performance, about 94% photodegradation was observed within 25 min under the reaction conditions. The photocatalyst was stable and about 85% and 81% photodegradation of MB were found under the two times of reusability tests.     

Synthesis and properties of poly(isobutyl methacrylate‐co‐butanediol dimethacrylate‐co‐methacryl polyhedral oligomeric silsesquioxane) nanocomposites

Poly[isobutyl methacrylate‐co‐butanediol dimethacrylate‐co‐3‐methacrylylpropylheptaisobutyl‐T8‐polyhedral oligomeric silsesquioxane] [P(iBMA‐co‐BDMA‐co‐MA‐POSS)] nanocomposites with different crosslink densities and different polyhedral oligomeric silsesquioxane (MA‐POSS) percentages (5, 10, 15, 20, and 30 wt %) were synthesized by radical‐initiated terpolymerization. Linear [P(iBMA‐co‐MA‐POSS)] copolymers were also prepared. The viscoelastic properties and morphologies were studied by dynamic mechanical thermal analysis, confocal microscopy, and transmission electron microscopy (TEM). The viscoelastic properties depended on the crosslink density. The dependence of viscoelastic properties on MA‐POSS content at a low BDMA loading (1 wt %) was similar to that of linear P(iBMA‐co‐MA‐POSS) copolymers. P(iBMA‐co‐1 wt % BDMA‐co‐10 wt % MA‐POSS) exhibited the highest dynamic storage modulus (E′) values in the rubbery region of this series. The 30 wt % MA‐POSS nanocomposites with 1 wt % BDMA exhibited the lowest E′. However, the E′ values in the rubbery region for P(iBMA‐co‐3 wt % BDMA‐co‐MA‐POSS) nanocomposites with 15 and 30 wt % MA‐POSS were higher than those of the parent P(iBMA‐co‐3 wt % BDMA) resin. MA‐POSS raised the E′ values of all P(iBMA‐co‐ 5 wt % BDMA‐co‐MA‐POSS) nanocomposites in the rubbery region above those of P(iBMA‐co‐5 wt % BDMA), but MA‐POSS loadings < 15 wt % had little influence on glass‐transition temperatures (T_g's) and slightly reduced T_g values with 20 or 30 wt % POSS. Heating history had little influence on viscoelastic properties. No POSS aggregates were observed for the P(iBMA‐co‐1 wt % BDMA‐co‐MA‐POSS) nanocomposites by TEM. POSS‐rich particles with diameters of several micrometers were present in the nanocomposites with 3 or 5 wt % BDMA. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 355–372, 2005     

LaCoO3晶格结构内外Mg的同步改性及其光催化性能

运用溶胶-凝胶法同步获得了LaCoO₃钙钛矿晶格结构内Mg²⁺的掺杂改性及晶格结构外MgO的异质结复合改性。观察到了同步改性后LaCoO₃催化剂上水体罗丹明B（RhB）光催化降解活性的显著提升,相同实验条件下最适Mg含量改性LaCoO₃上RhB的降解率从原始LaCoO₃的58%显著提升至98%,表观一级动力学常数为改性前催化剂的4.5倍。运用X射线衍射（XRD）、氮气低温吸附-脱附（BET法）、扫描及透射电子显微镜（SEM,TEM）、傅里叶变换红外光谱（FT-IR）、X光电子能谱（XPS）、紫外-可见漫反射（DRS）及光致发光光谱（PL）等分析和表征系统探讨了改性前后催化剂的理化特征。结果表明,约10% Co³⁺晶格结点可为Mg²⁺掺杂取代而LaCoO₃钙钛矿结构基本保持不变,适量Mg²⁺对Co³⁺的掺杂取代可形成晶格畸变和杂质能级、衍生Co⁴⁺及促进溶氧吸附从而有利于RhB的光催化降解,过量掺杂的Mg则可能成为光生载流子复合中心从而不利于RhB的去除。适量MgO异质结复合改性LaCoO₃一方面赋予复合催化剂较大表面积,利于RhB富集,也赋予丰富的表面羟基利于光生电子的捕获并衍生活性羟基自由基;另一方面还可能通过LaCoO₃与MgO异质结间电子的跃迁和流动以及晶格氧空位抑制光生载流子的复合,提高复合催化剂的光量子效率。     

Effect of homologous nano-composites on the thermal degradation of the silicone resin

Effect of homologous of nano-composites on the thermal degradation of the silicone resin was researched based on graphene oxide (GO)/polyhedral oligomeric silsesquioxane (POSS). First, the amino-POSS was grafted onto the GO surface (GO/POSS) via the amide bond. Second, GO/POSS was incorporated into the silicone with active epoxy group via chemistry grafting. The reaction kinetics of the thermal decomposition of the epoxy–silicone resin based on nano-composite homologous effect is developed. The initial decomposition temperature of the modified silicone resin is improved by 77.2°C. At high temperatures, GO/POSS-modified silicone molecular end forms homologous nano-structures, which can restrain silicone future degradation. The developed strategy has potential to restrain the degradation of the polymer molecular chain.     

Synthesis and thermal properties of hybrid copolymers of syndiotactic polystyrene and polyhedral oligomeric silsesquioxane

Copolymerizations of styrene and the polyhedral oligomeric silsesquioxane (POSS)–styryl macromonomer 1‐(4‐vinylphenyl)‐3,5,7,9,11,13,15‐heptacyclopentylpentacyclo [9.5.1.1^3,9.1^5,15.1^7,13] octasiloxane have been performed with CpTiCl₃ in conjunction with methylaluminoxane. Random copolymers of syndiotactic polystyrene (sPS) and POSS have been formed and fully characterized with ¹H and ¹³C NMR, gel permeation chromatography, differential scanning calorimetry, and thermogravimetric analysis. NMR data reveal a moderately high syndiotacticity of the polystyrene backbone consistent with this use of CpTiCl₃ as a catalyst and POSS loadings as high as 24 wt % and 3.2 mol %. Thermogravimetric analysis of the sPS–POSS copolymers under both nitrogen and air shows improved thermal stability with higher degradation temperatures and char yields, demonstrating that the inclusion of the inorganic POSS nanoparticles makes the organic polymer matrix more thermally robust. The polymerization activity and thermal stability are also compared with those of reported atactic polystyrene–POSS copolymers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 885–891, 2002; DOI 10.1002/pola.10175