The effect of Zn, Al layered double hydroxide on thermal decomposition of poly(vinyl chloride)

Poly(vinyl chloride)/layered double hydroxide (LDH) composite was prepared by mixing 4 wt% Zn₂Al-CO₃-LDH with PVC and fluxing at 180 °C. The thermal decomposition behaviour of the LDH + PVC composite in air and nitrogen environments was systematically investigated. We found that mixing Zn₂Al-CO₃-LDH into PVC facilitates dehydrochlorination from ca. 300 to 270 °C but reduces the reaction extent to leave more chlorine on the polyene backbones both in air and N₂. We have also found that at 400-550 °C, both in air and N₂, LDH assists the formation of char-like materials and decreases the release of volatile hydrocarbons. From 550 to 800 °C, the char-like materials are mostly retained in N₂ while they are almost completely thermo-oxidized (burned) in air. Thus, addition of Zn₂Al-CO₃-LDH to PVC does not increase the thermal stability, but does promote charring to retard the generation of flame. The influence of LDH on PVC thermal properties has been also addressed mechanically.     

Thermal decomposition of poly(2-vinylpyridine): Effect of complexation with copper chloride

The thermal decomposition of complexes between poly(2-vinylpyridine) (P2VPy) and copper chloride was investigated by several techniques, including thermogravimetric analysis and mass spectrometry. P2VPy was selected as the host polymer for two reasons: its ability to form complexes with copper compounds which are soluble in high concentrations, and because it forms essentially no char upon pyrolysis. The decomposition mechanism of P2VPy changes significantly upon complexation with copper compounds. P2VPy was initially thought to be an ideal ligand for the pyrolytic formation of pure copper owing to its low carbon yield upon thermal decomposition. The presence of copper chloride during polymer decomposition alters the decomposition mechanism of the polymer and accounts for significant yields of carbonaceous char. The magnitude of this effect is dependent upon the quantity of copper present. Polymer char yields as high as 41 wt% have been obtained when each pyridine moiety is complexed by CuCl₂. Studies based on the model compound Cu(2-picoline)₂Cl₂ indicate that the diffusion length of released volatiles plays a significant role in the observed decomposition mechanisms.     

Effect of branching on the degradation behaviour and caloric properties of PVC

Nine different PVC samples with defined chlorine content and degree of branching have been investigated. The aim of the work was the influence of these parameters on some caloric properties as well as the degradation behaviour and the degradation products. As expected, the heat of combustion decreases with increasing chlorine content. As determined by simultaneous thermal analysis/mass spectrometry, the volatile degradation products of the pyrolysis in nitrogen atmosphere vary. The higher the chlorine content, the higher the amount of chlorinated degradation products and the lower the amount of polycyclic aromatic hydrocarbons (PAH). A higher number of branching promotes the formation of alcylated aromatic hydrocarbons.     

Thermal decomposition of copper(II) benzenetricarboxylates in air atmosphere

The conditions of thermal decomposition of copper(II) benzenetricarboxylates in air atmosphere at heating rates of 10 and 5 deg·min^–1 were studied. At 10 deg · min^–1, the hemimellitate and trimesinate of copper(II) lose crystallization water and then decompose directly to CuO, whereas at 5 deg·min^–1 they decompose to CuO through Cu₂O. The trimellitate of copper(II) heated at various rates decomposes in the same way: it loses 1 water molecule and then decomposes directly to CuO.     

Curing and properties of chloroprene and butadiene rubber (CR/BR) blends cross-linked with copper(I) oxide or copper(II) oxide

This paper discusses the curing and properties of chloroprene and butadiene rubber (CR/BR) blends cross-linked with copper(I) oxide (Cu₂O) or copper(II) oxide (CuO). The results revealed that the cross-linking degree of CR/BR blends decreased with the increasing amount of butadiene rubber (BR) in the blends. The mechanical properties of cured CR/BR blends depended on the proportion of elastomers in blends, as well as on the type and amount of the cross-linking agent (Cu₂O, CuO). The cross-linking of CR/BR/Cu₂O or CR/BR/CuO blends followed according to cationic mechanism, using Lewis acid, copper(I) chloride (CuCl) or copper(II) chloride (CuCl₂) generated in situ. Additionally, the prepared compositions, both unfilled and filled, were characterized by very high resistance to flame.     

Investigations on poly(vinyl chloride). III. Effects of metal oxides upon thermal decomposition of poly(vinyl chloride)

Thermal decomposition mechanisms of poly(vinyl chloride) (PVC) and the effects of a few metal oxides on the pyrolysis of PVC were previously reported. In the present work, 33 metal oxides were investigated to determine their effects on the thermal decomposition of PVC, by using a pyrolysis gas chromatograph. Most acidic oxides accelerate the recombination of chlorine atoms with double bonds, since PVC containing these metal oxides easily release lower aliphatics, toluene, ethylbenzene, o-xylene, and chlorobenzenes. On the other hand, most basic metal oxides, such as oxides of alkaline earths or silver, inhibit the recombination. These tendencies observed in the thermal decomposition of PVC agree with the contributions of corresponding metal salts to the dehydrochlorination of PVC proposed by other workers. This means that thermal decomposition or dehydrochlorination of PVC is affected by irregularities in head-to-tail linkages formed by the recombination of chlorine atoms during heat treatment of PVC.     

New complexes derived from copper(II) salts and bis-N-(p-methoxyphenyl)-2, 5-furylideneimine

Summary Two new complexes derived from bis-N-(p-methoxyphenyl)-2, 5-furylideneimine(L) (1) and copper(II)[CuL₂](ClO₄)₂·4H₂O (2) and [(CuCl₂)₂L] (3), have been synthesized. The i.r. spectra of both complexes show that the ligand coordinatesvia oxygen and nitrogen. Spectral and magnetic properties are consistent with the formulation of (2) as an elongated tetragonal octahedral copper(II) structure and (3) as distorted square-planar copper(II) structure, where each copper atom is bonded to two chlorine, one oxygen and one nitrogen atoms, and two carbon and two copper atoms tetrahedrally surround the oxygen atom.     

Reduction from copper(II) to copper(I) upon collisional activation of (pyridine)2CuCl+

Electrospray ionization of dilute aqueous solutions of copper(II) chloride‐containing traces of pyridine (py) as well as ammonia permits the generation of the gaseous ions (py)₂Cu⁺ and (py)₂CuCl⁺, of which the latter is a formal copper(II) compound, whereas the former contains copper(I). Collision‐induced dissociation of the mass‐selected ions in an ion‐trap mass spectrometer (IT‐MS) leads to a loss of pyridine from (py)₂Cu⁺, whereas an expulsion of atomic chlorine largely prevails for (py)₂CuCl⁺. Theoretical studies using density functional theory predict a bond dissociation energy (BDE) of BDE[(py)₂Cu⁺ ‐Cl] = 125 kJ mol^?1, whereas the pyridine ligand is bound significantly stronger, i.e. BDE[(py)CuCl⁺ ‐py] = 194 kJ mol^?1 and BDE[(py)Cu⁺ ‐py] = 242 kJ mol^?1. The results are discussed with regard to the influence of the solvation on the stability of the Cu^I/Cu^II redox couple. Copyright © 2010 John Wiley & Sons, Ltd.     

Study on thermal decomposition of copper(II) acetate monohydrate in air

The thermal decomposition of copper(II) acetate monohydrate (CuAc₂·H₂O) under 500 °C in air was studied by TG/DTG, DTA, in situ FTIR and XRD experiments. The experimental results showed that the thermal decomposition of CuAc₂·H₂O under 500 °C in air included three main steps. CuAc₂·H₂O was dehydrated under 168 °C; CuAc₂ decomposed to initial solid products and volatile products at 168–302 °C; the initial solid products Cu and Cu₂O were oxidized to CuO in air at 302–500 °C. The copper acetate peroxides were found to form between 100 and 150 °C, and the dehydration of these peroxides resulted in the presence of CuAc₂·H₂O above 168 °C. The initial solid products were found to be the admixture of Cu, Cu₂O, and CuO, not simply the single Cu₂O as reported before. Detailed reactions involved in these three steps were proposed to describe the complete mechanism and course of the thermal decomposition of CuAc₂·H₂O in air.     

Investigations on poly(vinyl chloride). IV. Effects of metal chlorides on the thermal decomposition of poly(vinyl chloride)

The effects of various metal oxides upon the thermal decomposition of poly(vinyl chloride) (PVC) were previously reported. In this work, 23 metal chlorides were investigated to determine their effects on the thermal decomposition of PVC by pyrolysis–gas chromatography at 500°C. Each metal chloride exhibits influences on the course of thermal decomposition of PVC almost similar to the corresponding metal oxide except for a few elements; the metal chlorides from acidic metal oxides accelerate the thermal decomposition of PVC, but the metal chlorides from basic metal oxides do not. On comparing the effects of metal oxides and metal chlorides on the thermal decomposition of PVC, most metal chlorides were found to accelerate the thermal decomposition of PVC more than the corresponding metal oxides, owing to ease of addition of the chlorine atoms released from metal chloride to the dehydrochlorinated chains. It is concluded from these results that the thermal decomposition of PVC containing metal salts is markedly influenced by the ease with which chlorine atoms are released from the corresponding metal chloride.     

Significantly enhanced electromagnetic interference shielding effectiveness of montmorillonite nanoclay and copper oxide nanoparticles based polyvinylchloride nanocomposites

In the present study, montmorillonite (MMT) nanoclay and copper oxide (CuO) nanoparticles (NPs) reinforced polyvinylchloride (PVC) based flexible nanocomposite films were prepared via solvent casting technique. Using Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Scanning electron microscopy (SEM) and thermo-gravimetric analysis (TGA), the structural, morphological and thermal properties of PVC/MMT/CuO nanocomposite films with various loadings of CuO NPs and MMT were investigated. These studies suggested that by the addition of dual nanofillers in the polymer matrix some structural modifications occurred owing to the homogenous dispersion of MMT and CuO NPs within the PVC matrix. The TGA results reveal that the addition of CuO NPs and MMT considerably improved the thermal stability of the nanocomposites. The EMI shielding effectiveness (SE) of nanocomposites was examined in the X-band (8–12 GHz) and Ku-band (12–18 GHz) frequency regions. The EMI SE values were found to be −30 dB (X-band) and −35 dB (Ku-band) for nanocomposites containing 0.3 wt% of CuO NPs and 4.7 wt% of MMT respectively while the shielding was found to be absorption dominant. These results emphasize that PVC/MMT/CuO nanocomposite films can be used as a potential EMI shielding material.     

Coordination behaviour of Schiff base 2-acetyl-2-thiazoline hydrazone (ATH) towards cobalt(II), nickel(II) and copper(II)

The synthesis and characterization of Co(II), Ni(II) and Cu(II) complexes of 2-acetyl-2-thiazoline hydrazone (ATH) are reported. Elemental analysis, IR spectroscopy, UV–Vis–NIR diffuse reflectance and magnetic susceptibility measurement, as well as, in the case of copper complex EPR spectroscopy, have been used to characterize the complexes. In addition, the structure of [NiCl₂(ATH)₂] (2) and [{CuCl(ATH)}₂(μ-Cl)₂] (3) have been determined by single crystal X-ray diffraction. In all complexes, the ligand ATH bonds to the metal ion through the imine and thiazoline nitrogen atoms. X-ray data indicates that the environment around the nickel atom in 2 may be described as a distorted octahedral geometry with the metallic atom coordinated to two chlorine atoms, two thiazoline nitrogen atoms and two imino nitrogen atoms. With regard to 3, it can be said that its structure consists of dimeric molecules in which copper ions are bridge by two chlorine ligands. The geometry about each copper ion approximates to a distorted square pyramid with each copper atom coordinated to one thiazoline nitrogen atom, one imine nitrogen atom, one terminal chlorine ligand and two bridge chlorine ligands. In compound 3, magnetic susceptibility measurements in the temperature range 2–300 K show an intradimer antiferromagnetic interaction (J = −7.5 cm⁻¹).     

基于热重红外联用分析的PE、PS、PVC热解机理研究

利用TGA-FTIR联用技术考察了PE、PS、PVC三种典型塑料的热解特性。结果表明,热稳定性从弱到强依次为PVC、PS、PE。PE热解反应过程为典型的一段式反应,红外光谱分析结果表明,PE热解过程为无规则断链形式,生成产物成分复杂,且随热解过程而改变,开始以饱和烃基团为主,中后期以烯烃基团为主,同时有少量炔烃;PS热解过程同样为一段式反应,红外光谱显示主要热解产物为苯乙烯单体,说明热解过程主要是苯乙烯的解聚过程;PVC热解过程较为复杂,主要分为脱氯阶段和共轭多烯重构阶段,红外光谱结果表明,产物中有芳香族化合物。脱氯过程和共轭多烯重构、环化过程在时间和空间上有重合,给二噁英类污染物的生成制造了可能。     

Vanillin–Schiff’s bases as organic thermal stabilizers and co-stabilizers for rigid poly(vinyl chloride)

Vanillin–Schiff’s bases (VSB) were examined as thermal stabilizers and co-stabilizers for rigid poly(vinyl chloride) (PVC) in air at 180 °C. Their high stabilizing efficiency were shown by their high thermal stability value (Ts), which is the time elapsed for the detection of HCl gas, if compared with dibasic lead carbonate and cadmium–zinc soap reference stabilizers used industrially, with better extent of discoloration. Blending these derivatives with reference stabilizers in different ratios greatly lengthens the thermal stability and the extent of discoloration of the PVC.Condensation products of Vanillin with amines are very active biologically, besides having good complexation ability with metal ions. The Ni²⁺ and Co²⁺ complexes of VSB derivatives gave better thermal stability and less discoloration than the parent organic stabilizer. Also, blending these complexes with either of the used reference stabilizers in different ratios gave better thermal stability and lower extent of discoloration. Thermogravimetric analysis confirmed the improved stability of PVC in the presence of the VSB derivatives, compared to blank PVC, PVC stabilized with reference stabilizers and PVC stabilized with binary mixture of VSB derivatives with reference stabilizer.The stabilizing efficiency of Vanillin–Schiff’s base (VSB) derivatives is attributed to the replacement of the labile chlorine atoms on the PVC chains by a relatively more stable moiety of the organic stabilizer.     

Influence of the nuclearity of copper(II) chloride complexes on their activity in catalytic C-Cl bond metathesis

Catalytic systems containing mainly mononuclear (CuCl ₄ ^2? ) or dinuclear (Cu₂Cl ₆ ^2? ) tributylbenzylammonium chlorocuprates are prepared by adsorption on silica surfaces of different structures (Aerosil and Silokhrom). Using ESR, XANES, and electronic spectroscopy, the CuCl ₄ ^2? ions are shown to be reduced rapidly under conditions of C-Cl bond metathesis, whereas the dinuclear chlorocuprates are relatively stable. A correlation between the number of copper ions in the chlorocuprate anion and its catalytic activity is established: the mononuclear complexes are several times more active than their dinuclear counterparts.     

Investigations on poly(vinyl chloride). I. Evolution of aromatics on pyrolysis of poly(vinyl chloride) and its mechanism

Poly(vinyl chloride) (PVC) alone or mixed with 10 wt-% and 50 wt-% TiO₂, SnO₂, ZnO, and Al₂O₃ were pyrolyzed by using a pyrolysis gas chromatograph. Benzene, toluene, ethylbenzene, o-xylene, styrene, naphthalene, and various chlorobenzenes were identified. No hydrocarbons could be detected in pyrolysis products of any samples at 200°C. More aromatic hydrocarbons than aliphatic hydrocarbons are released from the PVC–TiO₂ system and in preheated PVC. The contrary result is observed in the PVC–ZnO and PVC–SnO₂ systems. Aromatics having methyl endgroups are easily released from the PVC–ZnO and PVC–SnO₂ systems and at elevated pyrolysis temperature, because methylene groups are easily isolated along the chain by ZnO, SnO₂ and the heating. The release of ethylbenzene o-xylene, and chlorobenzenes suggests a repeated dehydrochlorination and recombination of HCl and Cl₂ to double bonds along the chain. Possible decomposition mechanisms of PVC are discussed.     

Photo-oxidation of poly(vinyl chloride)

The photo-oxidation of PVC has been studied over the temperature range 30–150°C. Initiation with ultraviolet (2537A) radiation has been correlated with the presence of minute amounts of ozone. The contribution of atomic oxygen and singlet oxygen (¹Δ_g) molecules to the initiation mechanism is discussed. The β-chloroketones probably formed in the photo-oxidation of PVC, decomposed according to a Norrish type I reaction without loss of chlorine atoms. The gaseous products of the photo-oxidation of PVC at 30°C were carbon dioxide, carbon monoxide, hydrogen, and methane. Hydrogen chloride was obtained only when PVC was heated at high temperatures. When PVC was photo-oxidized and then heated at high temperature, benzene was obtained in addition to hydrogen chloride. The gaseous products from the photo-oxidations of model compounds, such as 4-chloro-2-butanone and 2,4-dichloropentane, were also compared with those from PVC. Hydrogen chloride was detected only after photo-oxidation at temperatures of 25°C or higher. Therefore, it was concluded that hydrogen chloride is mainly a product of thermal decomposition. Since unsaturation was not observed in photo-oxidized PVC films, the cause of discoloration is unclear. When PVC was modified by stabilizers or additives, the oxidative degradation was further complicated by side reactions with the additives.     

Selective copper(II)-catalyzed aerobic oxidative cleavage of aromatic gem-disubstituted alkenes to carbonyl compounds under neutral and mild conditions

Three copper(II) catalytic systems, CuCl₂·2H₂O, CuCl₂·2H₂O+phenanthroline, and [Cu(μ-Cl)Cl(phen)]₂ were used to cleave alkenes to their corresponding carbonyl compounds under aerobic and neutral conditions. [Cu(μ-Cl)Cl(phen)]₂ shows enhanced selectivity over the other two catalytic systems. The oxidative cleavage reactions were carried out in mixed H₂O/THF solvent system under oxygen (4 atm) at 60°C. The real oxidant is 2-hydroperoxytetrahydrofuran, which is generated in situ in the process through the reaction between THF and oxygen catalyzed by copper(II). The cleavage reactions are selective for aromatic gem-disubstituted alkenes. Aromatic internal alkenes are slow to be oxidized, and both aliphatic terminal and internal alkenes are inert to oxidative cleavage. Free radical scavenger 2,2,6,6, tetramethylpiperidinyl-1-oxyl (TEMPO) deactivates the reaction indicating the involvement of free radical path in the reaction mechanism.     

Comparative Study on Decomposition of CFCl<Subscript>3</Subscript> in Thermal and Cold Plasma

Decomposition of CFCl₃ was investigated in an RF inductively coupled thermal reactor in neutral, oxidative and reductive conditions, and in a silent electric discharge (cold plasma) in neutral and oxidative conditions, respectively. In RF thermal plasma reactor, in neutral conditions, mainly gaseous products and minor amount of solid soot was formed. About 50% the soot could be extracted by toluene. Both the gas phase and the extract contained a wide range of aliphatic and aromatic compounds including chlorine and fluorine containing polyaromatic hydrocarbons (PAHs). In oxidative conditions much less soot was formed as compared to the neutral case. The solid product contained about 45% extractable fraction even in oxidative conditions. However, the extract contained less PAHs than in neutral conditions. In reducing atmosphere the soot yield was similar to the neutral case, but the soot contained 29% extractable fraction only. The extract consisted of polyhalogenated aromatic and polyaromatic hydrocarbons as main components. In neutral conditions different chlorofluorocarbons (CFCs) and chlorine were detected as gaseous products in cold plasma. In oxidative conditions, as final products of decomposition CO₂, CFCs and Cl₃ were formed.     

Molecular structure of the dimeric complex of copper (II) chloride with triphenyl-N-[6-methylpyridyl-2]phosphinimine

The complex of copper(II) dichloride with triphenyl-N-(6-methylpyridyl-2)phosphinimine has been studied by X-ray diffraction. This compound has a dimeric structure with two ₂-bridge chlorine atoms. The coordination of copper atoms by three chlorine atoms and the N atom of the heterocycle is of a strongly distorted planar-square type. A peculiar feature of this structure is the presence of intramolecular contacts Cu...N (2.504 Å and 2.492 Å) involving the imine nitrogens of the P,N-containing ligands which are responsible for strong additional coordination of the copper atoms. In methanol the P,N-containing ligand forms a complex with Cu(II) where the metal-to-ligand ratio is equal to 12. The ESR data point to the bidentate nature of the ligand in solution, where all four nitrogen atoms, contributed by both of the ligands, are located in the plane of the metal atom.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 337–341, February, 1993.