Thermal and rheological behaviour of some random aromatic polyethersulfone/polyetherethersulfone copolymers

The thermal and rheological behaviour of seven random Cl-ended aromatic PES/PEES copolymers (M_n ≈ 9500 g mol⁻¹), at various PES/PEES repeating unit ratios, was studied. The glass transition temperatures (T_g), determined by DSC experiments, showed a dependence on copolymer composition significantly different from the ideal linear behaviour expected on the basis of Fox equation. Degradations were carried out in the scanning mode, under flowing nitrogen, in the temperature range 35-650 °C and a single degradation stage was observed for all copolymers. The initial decomposition temperatures (T_i) and the half decomposition temperatures (T_1/2) were directly determined by TG curves, while the apparent activation energies of degradation (E_a) were obtained by the Kissinger method. In addition, the complex viscosity (η^∗) of molten copolymers was determined in experimental conditions of linear viscoelasticity. T_i, T_1/2, E_a, and η^∗ values were depending on copolymer composition, showing a trend similar to that of T_g values. The results obtained were discussed and interpreted.     

The influence of chain rigidity on the thermal properties of some novel random copolyethersulfones

Some random low molar mass (M_n ≈ 9000 g mol⁻¹) poly(ethersulfoneethersulfone)/poly(ethersulfoneethersulfonebiphenylsulfone) P(ESES)/P(ESESBS) copolymers, with various (25%, 50% and 75%) ESESBS units contents, were synthesized to obtain compounds with higher chain rigidity than PES. The thermal characterization of the prepared copolymers, as well as that of corresponding P(ESES) and P(ESESBS) homopolymers, was performed, and all investigated parameters showed strong dependence on polymer composition.The glass transition temperature (T_g) was calorimetrically determined by DSC technique, and the obtained values increased linearly as function of ESESBS units percentage, thus indicating an increasing chain rigidity.Degradations were carried out in dynamic heating conditions, from 35 °C to 700 °C, in both flowing nitrogen and static air atmosphere, and the characteristic parameters of degradation were determined in order to draw useful information about the overall thermal stability of the studied compounds. The apparent activation energy of degradation (E_a) was obtained by the Kissinger method, and the values found increased linearly as a function of ESESBS content, while the temperature values at 5% mass loss (T_5%) showed an opposite linear trend. The results are discussed and interpreted.     

Thermal stability of poly(N-vinyl-2-pyrrolidone-co-methacrylic acid) copolymers in inert atmosphere

The thermal stability of poly(N-vinyl-2-pyrrolidone-co-methacrylic acid) copolymers was studied by thermogravimetry and infrared spectroscopy in inert atmosphere. The thermogravimetric curves suggested that the effective degradation of both systems occurred in the temperature range 350–500 °C with more than 60% mass loss. At this temperature, the activation energy was in the range 160–200 kJ mol⁻¹ (average values), suggesting that the degradation occurred by a random scission of the chain. The FTIR results indicated that the main volatile products of degradation are CO₂, CO and hydrocarbons (unsaturated structures) with low molecular weight. Pure PVP also showed the formation of NH₃ which was apparently suppressed in the copolymer by the formation of large amounts of CO₂ and CO. The results suggested that the thermal stability of the copolymers was essentially associated with the N-vinyl-2-pyrrolidone monomer, losing stability when the percentage of methacrylic acid in the copolymer system was increased.     

Thermal and rheological properties of miscible polyethersulfone/polyimide blends

Blends of an aromatic polyethersulfone (commercial name Victrex) and a polyimide (commercial name Matrimid 5218), the condensation product of 3,3′,4,4′-benzophenone tetracarboxylic dianhydride and 5(6)-amino-1-(4′-aminophenyl)-1,3,3′-trimethylindane, were studied by differential scanning calorimetry, dynamic mechanical analysis, and rheological techniques. The blends appeared to be miscible over the whole range of compositions when cast as films or precipitated from solution in a number of solvents. After annealing above the apparent phase boundary, located above T_g, the blends were irreversibly phase separated indicating that the observed phase boundary does not represent a true state of equilibrium. Only a narrow “processing window” was found for blends containing up to 20 wt % polyimide. Rheological measurements in this range of compositions indicated that blending polyethersulfone with polyimide increases the complex viscosity and the elastic modulus of the blends. For blends containing more than 10 wt % polyimide, abrupt changes in the rheological properties were observed at temperatures above the phase boundary. These changes may be consistent with the formation of a network structure (due to phase separation and/or crosslinking). Blends containing less than 10 wt % polyimide exhibited stable rheological properties after heating at 320°C for 20 min, indicating the existence of thermodynamic equilibrium.     

Thermal degradation behaviors of some branched and linear polysiloxanes

The thermal degradation behaviors of some branched and linear polysiloxanes were studied by thermogravimetric (TG) analysis and infrared (IR) spectroscopy, and the effect of phenyl content on the thermal stability of the tested branched polysiloxanes was investigated. The branched polysiloxanes with phenyl obtain higher thermal stability at lower temperature. The degradation residues of the examined branched polysiloxanes at 800 °C are rather high, 65.1-77.6% in N₂ and 40.5-66.5% in air, respectively. However, the amount of solid residue increases with decrease in phenyl content in both N₂ and air atmospheres. It was found that the thermal stability of the branched polysiloxanes is higher than that of the linear one, which indicated that the branched structure benefits the formation of a crosslink in the solid residue.     

Thermal and flammability properties of polyethersulfone/halloysite nanocomposites prepared by melt compounding

This paper presents a study of polyethersulfone (PES)/halloysite nanotube (HNTs) nanocomposites prepared by melt compounding either through a simple extrusion process or via a water-assisted extrusion procedure. Scanning and transmission electron microscopy techniques are combined with rheological measurements to assess the influence of polymer end groups (–Cl or –OH) and water injection on the HNTs dispersion state. A morphological transition form microcomposite to nanocomposite is achieved when replacing –Cl chain ends of PES by –OH groups, especially when water is injected during processing. By a combination of Soxhlet extraction and thermogravimetric analysis, we show that some PES(OH) chains are covalently bonded onto the aluminosilicate surface during extrusion. A mechanism describing the physico-chemical action of water is presented. The best system in terms of clay dispersion has been retained to characterize PES-HNTs nanocomposites with respect to their thermo-mechanical, thermal and fire (mass loss calorimetry and UL-94) properties. Dynamic mechanical analysis shows a significant enhancement in the storage modulus of halloysite-based nanocomposites when compared to the unfilled matrix. The improved thermal and thermo-oxidative stability of PES in presence of HNTs is mainly attributed to the labyrinth effect provided by individually dispersed nanotubes, which is reinforced during the decomposition process by the formation of a protective charred ceramic surface layer. The mechanism of action of HNTs for fire retardancy of PES presumably arises from a synergistic effect between physical (i.e. ceramic-like structure formation and mechanical reinforcement of the intumescent char) and chemical (i.e. charring promotion) processes taking place in the condensed phase. According to this study, the straightforward and cost-effective melt compounding route could pave the way for future development of high-performance nanoscale polymeric materials combining enhanced thermal properties and excellent flame retardant behaviour.     

氟橡胶/改性乙丙橡胶并用胶的热稳定性

采用热分析技术考察了氟橡胶及氟橡胶(FPM)/改性乙丙橡胶(MEPDM)并用胶在氮气中的热稳定性, 通过微分法与积分法两种动力学方法计算出了FPM及FPM/MEPDM并用胶的热分解活化能E和指前因子A. 结果表明, 并用胶的热分解温度稍高于纯的氟橡胶, 但热分解活化能略低于氟橡胶, FPM、FPM/MEPDM(5%)和FPM/MEPDM(10%)的热分解活化能分别为251.74、244.98和219.60 kJ·mol-1; 热分解反应级数n均为0.95. 随着失重百分率的增大, 热分解活化能增大.     

Effect of thermal degradation on rheological properties for poly(3-hydroxybutyrate)

Thermal degradation at processing temperature and the effect on the rheological properties for poly(3-hydroxybutyrate) have been studied by means of oscillatory shear modulus and capillary extrusion properties, with the aid of molecular weight measurements. Thermal history at processing temperature depresses the viscosity because of random chain scission. As a result, gross melt fracture hardly takes place with increasing the residence time in a capillary rheometer. Moreover, it was also found that the molecular weight distribution is independent of the residence time, whereas the inverse of the average molecular weight is proportional to the residence time. Prediction of average molecular weight with a constant molecular weight distribution makes it possible to calculate the flow curve following generalized Newtonian fluid equation proposed by Carreau as a function of temperature as well as the residence time.     

Thermal decomposition kinetics of some transition metal coordination polymers of fumaroyl bis (paramethoxyphenylcarbamide) using DTG/DTA techniques

In the present work, thermal degradation behaviors of the Zn (II), Cd(II), and Hg(II) coordination polymers of fumaroyl bis (paramethoxyphenylcarbamide) (fbpmpc) have been investigated by using thermogravimetric (TG) analysis, differential thermal analysis (DTA) and derivative thermogravimetry (DTG) analysis under non-isothermal conditions in nitrogen atmosphere at multiple heating rates. TG–DTA study noteworthy inferred the presence of lattice water in outer sphere of all the polymers. The decomposition was carried out in three-four well-separated stages where involved the loss of water molecules in the first step followed by organic ligand. Furthermore, the kinetics and thermodynamic stabilities of multi-steps thermal degradation were evaluated. The activation energy (E_a), order of reaction (n), Arrhenius factor (A), enthalpy change (ΔH), entropy change (ΔS) and free energy change (ΔG) of coordination polymers were obtained by using the Coats–Redfern (CR) method. Ultimately, based on initial, half and final decomposition temperature, and kinetics parameters values the orders of thermal stability were estimated.     

Thermal Kinetics and Decomposition Mechanism of Methylphenylphosphinic Acid and Diphenylphosphinic Acid

Thermal degradation and degradation kinetics of methylphenylphosphinic acid（MPPA） and diphenyl- phosphinic acid（DPPA） were investigated via thermogravimetric analysis（TGA） technique under non-isothermal conditions. The activation energies of the decomposition process for the two compounds were calculated through the Friedman and Kissinger-Akahira-Sunose（KAS） methods. The thermal decomposition mechanism was investigated by the Criado method based on a set of TGA data obtained at different heating rates. It was shown that the activation energies calculated from the decomposition reaction by different methods were consistent with each other. The results show that the probable model for the degradation of MPPA and DPPA agreed with the two-dimensional（D2） and three-dimensional（D4） diffusion models, respectively. Moreover, the thermodynamic functions（△H, △S, △G） of the two decomnosition reactions were also calculated.     

Thermal behaviour of binary and ternary copolymers containing acrylonitrile

Three types of acrylonitrile copolymers (acrylonitrile-styrene-butadiene copolymer (ABS¹), acrylonitrile-styrene random copolymer (SAN²) and acrylonitrile-butadiene random copolymer (BAN³) were studied by thermogravimetry (TG/DTG⁴) and by pyrolysis in a semi-batch process at 450 °C in order to find structure–thermal behaviour relationships. The overlapped thermo-oxidative degradation processes were separated and the corresponding kinetic parameters were calculated. The TG/DTG studies have evidenced that the styrene-acrylonitrile interactions stabilize the nitrile groups reacting by chain scission rather than cyclization and destabilize the styrene units. Also, the cyclization of the acrylonitrile units in ABS is favoured by interactions with the styrene and butadiene units. The pyrolysis behaviour evidenced that the styrene-acrylonitrile interactions in SAN and ABS lead to the formation of 4-phenylbutyronitrile as the most important decomposition compound. ABS shows similar composition of the degradation oil with SAN copolymer therefore in the ABS the styrene-butadiene interactions are less important than those between styrene and acrylonitrile units.     

Glycopolymers resultant from ethylene-vinyl alcohol copolymers: Degradation and rheological behavior in bulk

The physical properties of glycopolymers based on d-(+)-glucosamine, d-(+)-galactosamine and d-(+)-mannosamine derivatives and obtained from two ethylene-vinyl alcohol, EVOH, copolymers with different vinyl alcohol compositions have been analyzed. The thermal degradation of these glycopolymers is almost independent of the type and amount of saccharide incorporated but slightly dependent on the initial EVOH copolymer composition. The glycopolymers derivate from the EVOH copolymer with lower ethylene content present two relaxation processes, while those derivatives from the EVOH copolymer with lower vinyl alcohol composition essentially show three relaxations processes. In both sets of glycopolymers, the relaxation process associated with the cooperative motions that take place at the glass transition is located at analogous temperatures to those previously determined by differential scanning calorimetry, both results being rather consistent.     

水溶性聚合物热稳定性研究进展

水溶性聚合物广泛应用于石油开采、水处理、造纸、印染以及医药等领域,该类聚合物热稳定性问题直接关系到其在高温环境下的应用性能,因此具有重要的研究意义和应用价值。本文选取了几类具有代表性的水溶性聚合物,详细综述了其热稳定性的研究进展,重点分析了不同类型的水溶性聚合物的热降解机理,并探讨了分子结构和外添加剂对热稳定性能的影响,最后对其发展前景进行了展望。     

Thermal stability and degradation products analysis of benzocyclobutene-terminated imide polymers

Benzocyclobutene-terminated imides were prepared and fully characterized with ¹H NMR, MS, and FT-IR. The thermal degradation of polymers was investigated by using thermogravimetric analyzer (TGA) and high-resolution pyrolysis-gas chromatography–mass spectrometry (HR-Py-GC–MS). TGA showed that thermal degradation of the polymer was a single-stage process in N₂, whereas a three-stage degradation in air atmosphere. The major involved products were found to be CO₂, naphthalene and naphthalene derivatives. Degradation mechanism of the polymer was suggested and the relationship between structures of the polymer and degradation products was also discussed.     

Dynamic mechanical properties of random ethylene/1-octene copolymers prepared by rapid cooling

The dynamic mechanical properties of a well-characterized series of homogeneous ethylene/1-octene copolymers with different random hexyl branch contents and prepared using different cooling conditions have been examined using dynamic mechanical analysis (DMA). It was confirmed that the relaxation behavior of copolymers varied continuously with the branch content: the magnitude of the β relaxation increased with branch content while the intensity of the α relaxation decreased with the branch content; both relaxation temperatures decreasing with increasing branch level in the copolymers. Copolymers prepared at different cooling conditions were further examined and strikingly continuous changes were found for the first time. The β relaxation was shown to correlate to the amorphous region, while the α₁ and α₂ relaxations can be clearly differentiated for some samples and are assumed to be associated with the interlamellar slip and intra-crystalline c-shear processes respectively. With increasing cooling rate, the relative intensity of α₁ relaxation to α₂ relaxation was found to decrease while the β relaxation did not change. The most informative data is determined from deconvolution of tan δ spectra. In higher crystallinity polymers the α₁ and α₂ relaxations are closely related in activation energy but have different temperature locations. For lower crystallinity systems, where the α₁ relaxation cannot be observed, the α₂ and β relaxations are closely linked, with activation energies approaching one another. These results show very clearly that, although the observed relaxation data can be separated through deconvolution into three separate peaks, the behaviors are closely linked. Presumably, this a clear reflection of the role of tie molecules in binding phases together and in influencing dynamic mechanical behavior. A clear change of behavior has also been observed in the β relaxation when a distinct amorphous phase exists outside of the spherulites, confirming the general belief that the crystalline phase influences the amorphous phase when it is confined within a spherulite. Again, this behavior is reflecting the role of tie molecules in binding together the nanocomposite structure of a spherulite.     

无机物对淀粉塑料热性能影响的研究进展

综述了近年来无机物对淀粉塑料热性能影响的研究进展。以淀粉塑料不同的热性能为主线,包括玻璃化转变温度、熔融加工性能和热稳定性三大方面;同时,从不同种类的无机物出发,分别讨论了硅酸盐、氧化物、氢氧化物及金属盐对各个热性能影响的研究现状,并对未来的发展趋势进行了展望。     

Thermal stability of aromatic polyesters prepared from diphenolic acid and its esters

The thermal performance of aromatic polyesters (poly(DPA-IPC), poly(MDP-IPC) and poly(EDP-IPC)) prepared from isophthaloyl chloride (IPC) with diphenolic acid (DPA) and its esters were studied with DSC and TG, and the decomposition mechanism of poly(DPA-IPC) were investigated using FTIR and integrated TG/FTIR analyses. As compared with ordinary aromatic polyesters, poly(DPA-IPC) has lower glass transition temperature (159 °C) and much lower thermal stability. It starts to decompose at about 210 °C and is characterized by two-stage thermal decomposition behavior, with active energies of decomposition of 206 kJ/mol and 389 kJ/mol, respectively. The analyses of the decomposition process and products indicate that the pendent carboxyl groups in poly(DPA-IPC) are responsible for its low thermal stability. Accordingly, a decomposition mechanism for the first stage is proposed. With this knowledge in mind, we capped the carboxyl groups in DPA with methyl and ethyl groups to prepare poly(MDP-IPC) and poly(EDP-IPC) from methyl diphenolate and ethyl dipenolate. As expected, these two polymers exhibit obviously improved thermal stability, with onset decomposition temperature of about 300 °C.     

Thermal behavior of some aromatic copolyethers containing a propylenic spacer

The main objective of this paper is to study the thermal stability of some aromatic copolyethers containing a propylenic spacer. Some of the investigated copolyethers displayed a liquid crystalline (LC) behavior, with the presence of the mesogenic groups in the main chain, inducing high values of the thermal transition temperatures. As a consequence, a thermal stability study was necessary to establish the maximum temperature value for the LC behavior characterization. A thermal degradation mechanism is proposed, taking into consideration the azobenzenic unit as the weakest link in the polymer chain and thus, the starting point of the thermal degradation process. The degradation mechanisms were correlated with the chemical structure and the polarity and conformation of the chains. Conformational analysis was performed using molecular simulations. Freeman-Caroll and Coats-Redfern methods were used to calculate some kinetic characteristics.     

Thermal degradation behaviour of radiation grafted FEP-g-polystyrene sulfonic acid membranes

The thermal degradation behaviour and the gaseous products of FEP-g-polystyrene sulfonic acid membranes prepared by radiation-induced grafting of styrene onto poly(tetrafluoroethylene-co-hexafluoropropylene) (FEP) films and the subsequent sulfonation were studied using thermal gravimetric analysis coupled with Fourier transform infrared spectrometry (TGA/FTIR). The membranes were found to have a three-step degradation behaviour due to water removal, elimination of sulfonic acid groups and decomposition of the FEP matrix. The evolving gaseous products were identified using FTIR analysis. The degree of grafting was found to have a strong effect on the weight loss in the membranes, whilst the degradation temperatures of the individual membrane components were shown to be independent of the degree of grafting.     

Photooxidative and pyrolytic degradation of methyl methacrylate-alkyl acrylate copolymers

Different compositions of poly(methyl methacrylate-co-methyl acrylate) (PMMAMA), poly(methyl methacrylate-co-ethyl acrylate) (PMMAEA) and poly(methyl methacrylate-co-butyl acrylate) (PMMABA) copolymers were synthesized and characterized. The photocatalytic oxidative degradation of all these copolymers were studied in presence of two different catalysts namely Degussa P-25 and combustion synthesized titania using azobis-iso-butyronitrile and benzoyl peroxide as oxidizers. Gel permeation chromatography (GPC) was used to determine the molecular weight distribution of the samples as a function of time. The GPC chromatogram indicated that the photocatalytic oxidative degradation of all these copolymers proceeds by both random and chain end scission. Continuous distribution kinetics was used to develop a model for photocatalytic oxidative degradation considering both random and specific end scission. The degradation rate coefficients were determined by fitting the experimental data with the model. The degradation rate coefficients of the copolymers decreased with increase in the percentage of alkyl acrylate in the copolymer. This indicates that the photocatalytic oxidative stability of the copolymers increased with increasing percentage of alkyl acrylate. From the degradation rate coefficients, it was observed that the photocatalytic oxidative stability follows the order PMMABA > PMMAEA > PMMAMA. The thermal degradation of the copolymers was studied by using thermogravimetric analysis (TGA). The normalized weight loss and differential fractional weight loss profiles indicated that the thermal stability of the copolymer increases with an increase in the percentage of alkyl acrylate and the thermal stability of poly(methyl methacrylate-co-alkyl acrylate)s follows the order PMMAMA > PMMAEA > PMMABA. The observed contrast in the order of photostability and thermal stability of the copolymers was attributed to different mechanisms involved for the scission of polymer chain and formation of different products in both the processes.