Influence of silica fillers during the electron irradiation of DGEBA/TETA epoxy resins, part III: Solid-state NMR investigations

The influence of silica fillers on chemical modifications of diglycidyl ether of bisphenol A/triethylene tetramine (DGEBA/TETA) epoxy resins induced by electron beam irradiation has been studied by ¹³C CP-MAS (Cross Polarisation and Magic Angle Spinning) NMR. Four kinds of silica filler were investigated: a pure micrometric silica, a treated micrometric silica, a pure nanometric silica and a treated nanometric silica. On the unirradiated epoxy resins, the magnetization transfer curves reveal structural differences due to the kind of silica fillers. A decrease of the epoxy network rigidity in the presence of nanometric silica fillers is shown. During irradiation, the formation of phenolic ends and enamine functions is confirmed. The slowing of the magnetization transfer of the pure and treated micrometric silica filled epoxy resin reveals an important decrease of the rigidity of these resins. On the pure and treated nanometric silica filled epoxy resins, reactions of the reactive species created by the irradiation in the epoxy resin and the silica particles surface are shown.     

High resolution solid‐state 13C‐NMR study of as‐cured and irradiated epoxy resins

This article presents the effects of strong ionizing radiations on the physico‐chemical modifications of aliphatic or aromatic amine‐cured epoxy resins based on diglycidyl ether of bisphenol A (DGEBA). Such epoxy resins have a considerable number of applications in the nuclear industrial field and are known to be very stable under moderate irradiation conditions. Using extensively high resolution solid‐state ¹³C‐NMR spectroscopy we show that the aliphatic amine‐cured resin (DGEBA‐TETA) appears much more sensitive to gamma rays than the aromatic amine‐cured one (DGEBA‐DDM). On the one hand, qualitative analyses of the high resolution solid‐state ¹³C‐NMR spectra of both epoxy resins, irradiated under similar conditions (8.5 MGy), reveal almost no change in the aromatic amine‐cured resin whereas new resonances are observed for the aliphatic amine‐cured resin. These new peaks were interpreted as the formation of new functional groups such as amides, acids and/or esters and to alkene groups probably formed in the aliphatic amine skeleton. On the other hand, molecular dynamics of these polymers are investigated by measuring the relaxation times, T_CH, T_1ρH and T_1C , before and after irradiation. The study of relaxation data shows the formation, under irradiation, of a more rigid network, especially for the aliphatic amine‐cured system and confirms that aromatic amine‐cured resin [DGEBA‐4,4′‐diaminodiphenylmethane(DDM)] is much less affected by ionizing radiations than the aliphatic amine‐cured resin [DGEBA‐triethylenetetramine(TETA)]. Moreover, it has been shown that the molecular modifications generated by irradiation on the powder of the aliphatic‐amine‐cured resin appear to be homogeneously distributed inside the polymers as no phase separations can be deduced from the above analyses. Copyright © 2001 John Wiley & Sons, Ltd.     

Quantification of the push-pull character of azo dyes and a basis for their evaluation as potential nonlinear optical materials

The push-pull characters of a large series of donor-acceptor substituted azo dyes—71 structures in all—have been quantified by the NN double bond lengths, d_NN, the ¹⁵N NMR chemical shift differences, Δδ_15N, of the two nitrogen atoms and the quotient, π^∗/π, of the occupations of the antibonding π^∗, and bonding π orbitals of this partial NN double bond. The excellent correlation of the occupation quotients with the bond lengths strongly infers that both π^∗/π and d_NN are excellent parameters for quantifying charge alternation in the push-pull chromophore and the molecular hyperpolarizability, β₀, of these compounds. By this approach, selected compounds can be appropriately considered as viable candidates for nonlinear optical (NLO) applications.     

Influence of silica fillers during the electron irradiation of DGEBA/TETA epoxy resins, part II: Study of the thermomechanical properties

This work describes the influence of silica fillers on the thermomechanical properties of diglycidyl ether of bisphenol A/triethylenetetramine (DGEBA/TETA) epoxy resins during ageing under electron beam irradiation. Whatever be the silica filler (pure micrometric ground and spherical silicas, nanometric silicas and coupling agent treated silicas), the glass transition temperature of the epoxy resins decreases with increasing irradiation dose, meaning that the main effect of the irradiation is chain scission. No influence of the silica fillers has been detected from the changes in the glass transition temperature with the increase in the irradiation dose. The disappearance of the cooperativity of the γ relaxation, the decrease of the α relaxation and the decrease of the elastic modulus at the rubbery plateau observed by dynamic mechanical analyses involve a decrease in the crosslink density of the epoxy resins. The occurrence of chemical reactions between the epoxy resin and the silica surface at high irradiation doses has been shown. Moreover, we show evidence that chemical reactions between the epoxy resin and the silica surface occur at high irradiation dose.     

H and C NMR spectroscopy of 9-acridinones

The ¹H and ¹³C NMR spectra of 9-acridinone and its five derivatives dissolved in CDCl₃, CD₃CN and DMSO-d₆ were measured in order to reveal the influence of the constitution of the compounds and features of the solvents on chemical shifts and ¹H-¹H coupling constants. Experimental data were compared with theoretically predicted chemical shifts, on the GIAO/DFT level of theory, for DFT (B3LYP)/6-31G^∗∗ optimized geometries of molecules—also for four other 9-acridinones. This comparison helped to ascribe resonance signals in the spectra to relevant atoms and enabled revelation of relations between chemical shifts and physicochemical features of the compounds. It was found that experimentally or theoretically determined ¹H and ¹³C chemical shifts of selected atoms correlate with theoretically predicted values of dipole moments of the molecules, as well as bond lengths, atomic partial charges and energies of HOMO.     

[F]Fluorophenyl organometallics as intermediates of no-carrier-added F-fluoroarylation reactions

Based on the recent availability of no-carrier-added (n.c.a.) 1-bromo-4-[¹⁸F]fluorobenzene with high radiochemical yield, the 4-[¹⁸F]fluorophenyl compounds of lithium, sodium and magnesium can now also effectively be prepared. Thus, [¹⁸F]fluoroarene reagents with a nucleophilic reaction centre are available and suitable among others for the formation of [¹⁸F]fluorophenyl compounds with electron donating substituents in the radiosynthesis of ¹⁸F-labelled complex organic structures. For these arylation reactions, however, the presence of macroscopic amounts of a haloarene as co-reactant is necessary with all n.c.a. [¹⁸F]fluorophenyl metallics. The ¹⁸F-fluoroarylation was verified for examples of aryl-carbon, -silicon, -sulphur, and -nitrogen bond formation with radiochemical yields of 20-25% related to the starting radioactivity of [¹⁸F]fluoride.     

The effect of silica nanoparticles on the morphology, mechanical properties and thermal degradation kinetics of PMMA

Silica-PMMA nanocomposites with different silica quantities were prepared by a melt compounding method. The effect of silica amount, in the range 1-5 wt.%, on the morphology, mechanical properties and thermal degradation kinetics of PMMA was investigated by means of transmission electron microscopy (TEM), X-ray diffractometry (XRD), dynamic mechanical analysis (DMA), thermogravimetric analyses (TGA), Fourier-transform infrared spectroscopy (FTIR), ¹³C cross-polarization magic-angle spinning nuclear magnetic resonance spectroscopy (¹³C{¹H} CP-MAS NMR) and measures of proton spin-lattice relaxation time in the rotating frame (T_1ρ(H)), in the laboratory frame (T₁(H)) and cross-polarization times (T_CH). Results showed that silica nanoparticles are well dispersed in the polymeric matrix whose structure remains amorphous. The degradation of the polymer occurs at higher temperature in the presence of silica because of the interaction between the two components.     

Triosmium clusters with bridging terpenic thioureato-like ligands

The reaction of acetone-4-(2-methoxy-phenyl)thiosemicarbazone with triosmium cluster Os₃(CO)₁₁(NCMe) results in the formation of the cluster with the μ₂ chelate-bridging ligand coordinated by S and N¹ atoms, which was studied by X-ray diffraction analysis. Reaction of (3aR, 3bR, 4aR, 5aS)-5a-hydroxy-3,4,4-trimethyl-3a,3b,4,4a,5,5a-hexahydrocyclopropa[3, 4]cyclopenta[1,2-c]pyrazole-1-carbothioic acid amide with Os₃(CO)₁₁(NCMe) gives rise to the complex with the bridging ligand coordinated by sulphur atom. Further transformation of the complex in hot benzene results in tautomeric rearrangement of the organic ligand and the cleavage of the pyrazolinol cycle to form an open chain tautomer. Unusual silica gel induced oxidative cleavage of the cyclopropane ring in the open chain derivative and epoxidation of cycloalcane C-C bond are observed on the air.     

The degradation of DGEBA/DICY under 100 keV proton irradiation

The degradation process of diglycidyl ether of bisphenol A (DGEBA)/ dicyandimide (DICY) solidified system under 100 keV proton irradiation was investigated. It was found that the proton irradiation results in mass loss, which the maximum is approximately 15.5 μg/cm², and change in surface morphology of DGEBA/DICY. The analyses of FT-IR and XPS showed that, the proton irradiation induces the debonding of the weak groups such as -CH₃, C-O, leading to formation of stable carbon-rich structure by recombination of the occurred free radicals, and chemical reaction between the free radicals with participation of proton. The degradation of DGEBA/DICY exhibits exponential variation with the proton fluence, which the degradation rate is high at the initial stage of irradiation, and becomes slow trending to constant after the proton fluence reaches 6 × 10¹⁵ /cm².     

New deuterium isotope effects on C and F chemical shifts across intramolecular hydrogen bonds of non-resonance assisted systems

A series of thioanilides and corresponding anilides, some of which contain fluorinated phenyl rings, have been synthesized as model compounds. They all contain rather strong intramolecular hydrogen bonds, the strength of which varies. Deuterium isotope effects on ¹⁹F and ¹³C chemical shifts due to deuteriation at the NH proton show interesting new long-range isotope effects on chemical shifts that may be related to the existence of an intramolecular hydrogen bond and to transmission of the isotope effect due to an electric field effect. Deuterium isotope effects on chemical shifts report on variations in hydrogen bonding, for example, as a function of changes in substituents or temperature. Deuteriation leads to a strengthening of the hydrogen bond.     

Rapid synthesis of C-labeled FK506 for positron emission tomography

The present study describes a rapid synthesis method for labeled [¹¹C]FK506 for positron emission tomography (PET). A one-pot reaction from [¹¹C]CH₃I, involving a Wittig reaction as the key carboncarbon bond formation was developed. The chemical process was accomplished using a designed, fully automated synthetic apparatus, and an injectable solution of [¹¹C]FK506 was obtained in only 34 min from [¹¹C]CH₃I. The decay-corrected radiochemical yield based on [¹¹C]CH₃I was 11.9%, and the specific activity was 39.8 GBq/μmol.     

A 13C, 15N and 77Se NMR Study of Some Diseleno Sulfonamides

¹³C, ¹⁵N and ⁷⁷Se NMR data are reported for ten title compounds. Some linear correlations of selenium, nitrogen and carbon chemical shifts values are described. A number of one- and two- bond ⁷⁷Se-¹³C coupling constants values are also given.     

Electronic and Spatial Structure of Piperidine and Its Substituted Derivatives from the Results of ab initio Calculations

The results of non empirical quantum-chemical calculations using the RHF/6-31G(d) and MP2/6-31G(d) methods do not agree with proposals for the axial position of the H atom on the N atom in the piperidine molecule. According to RHF/6-31G(d) calculations for the N-methylpiperidine molecule and its chloro-substituted derivatives an equatorially placed methyl group is energetically more favored than an axial. The axial C-Cl and C-H bonds in these molecules are longer than the equatorial. The ³⁵ Cl NQR frequencies for the axial Cl atoms are lower than the equatorial. The ³⁵ Cl NQR frequency of the axial chlorine atom in 2-chloro-1-methylpiperidine is anomalously low. This is chiefly due to the high population density of its p σ-orbital and this is a result of the polarization of the C-Cl bond via the N atom unshared electron pair directly through the field. The effect of a similar unshared electron pair on the parameters of the C-Cl bond in the ClCH₂NH₂ molecule has been studied by the RHF/6-31(g) method for different angles of rotation of the ClCH₂ group around the C-N bond. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 7, pp. 1044–1052, July, 2005.     

Substituent effects on the P NMR chemical shifts of arylphosphorothionates

Six tris(aryloxy)phosphorothionates substituted in the para position of the aromatic rings were synthesized and studied by ³¹P NMR, X-ray diffraction techniques and ab initio calculations at a RHF/6-31G** level of theory, in order to find the main structural factors associated with the δ³¹P in these compounds. As the electron-withdrawing (EW) ability of the substituents was increased, an ‘abnormal’ shielding effect on δ³¹P of the arylphosphorothionates was observed. The analyses of the geometrical properties obtained through both experimental and theoretical methods showed that a propeller-type conformation is preferred for the arylphosphorothionates, except in the case of the tris(O-4-methylphenyl)phosphorothionate, since one of the aromatic rings is not rotated in the same direction as the other two in the solid state. The main features associated with the δ³¹P NMR of compounds 1-6 were a decrease of the averaged O-P-O angle and mainly the shortening of the PS bond length, which is consistent with an increase of the thiophosphoryl bond order as δ³¹P values go upfield. On the other hand, comparison of the experimental and calculated bond lengths and bond angles involving α bonded atoms to phosphorus of the six compounds suggested that stereoelectronic interactions of the type n_πO-σ*_PS, n_πO-σ*_P-OAr and n_πS-σ*_P-OAr could be present in the arylphosphorothionates 1-6.     

Beitrag zum problem der bandenverschiebung in den i.r.-spektren von dialkyldithiocarbamidaten : Teil III. Pyrroldithiocarboxylate. der bereich von 4000–300 cm-1

An i.r. spectrometric study of specially prepared pyrroledithiocarboxylates is described. These compounds were selected as being very similar in mass and structure to the previously studied tetramethylenedithiocarbamates (TMDTC) except for the presence of a single C-N bond. The i.r. spectra of the new compounds show very intense bands in the region of 1300 cm^-1, which can be ascribed to the C-N bond. The corresponding bands in the spectra of the TMDTC compounds are shifted by ca. 150 cm^-1 to higher wavenumbers. hence it seems correct to suggest that the C-N bond in such compounds has the character of a partial double bond.     

Hyperpolarizability of donor-acceptor azines subject to push-pull character and steric hindrance

The push-pull character of two series of donor-acceptor azines has been quantified by ¹³C, ¹⁵N chemical shift differences of the partial C(1)N(1) and N(2)C(2) double bonds in the central linking C(1)N(1)-N(2)C(2) unit and by the quotient of the occupations of the bonding π and anti-bonding π^∗ orbitals of these bonds. Excellent correlation of the latter push-pull parameter with the corresponding bond lengths d_CN strongly recommend both the occupation quotients π^∗/π and the corresponding bond lengths as reasonable sensors for quantifying the push, pull character along the CN-NC linking unit, for the donor-acceptor quality of the two series of azines and for the molecular hyperpolarizability ß₀ of these compounds. Within this context, reasonable conclusions concerning the interplay of steric hindrance in the chromophore, push-pull character and hyperpolarizability of the azines and their application as NLO materials will be drawn.     

Covalent grafting of organoalkoxysilanes on silica surfaces in water-rich medium as evidenced by <Superscript>29</Superscript>Si NMR

This paper addresses two questions related to functionalization of silica particles: (1) is the grafting of hydrophobic organoalkoxysilanes on a silica surface possible in water-rich medium and (2) how to prove the formation of covalent bonds with the surface? Trimethylethoxysilane, dimethyldiethoxysilane and methyltriethoxysilane have been reacted with precipitated silica in water-rich medium (water/ethanol 25/75 v/v) and ²⁹Si MAS NMR was used to answer both questions: ²⁹Si chemical shift values of the organosilicon units in the case of trimethylethoxysilane and dimethyldiethoxysilane clearly distinguished between self-condensation reactions and surface reactions through covalent bonds.     

A convenient method for reduction dehalogenation of α-halocarbonyl compounds using benzenethiol in K+/CH3CN system

Benzenethiol, as a reductive agent for the dehalogenation of various α-halocarbonyl compounds, is investigated in the K⁺/CH₃CN system. The reaction affords the reduced compounds in high yields under mild reaction conditions, especially α-chlorocarbonyl compounds. Furthermore, the reaction performed under ultrasonic irradiation greatly shortens the reaction time.     

Recent advances in the synthetic and mechanistic aspects of the ruthenium-catalyzed carbon-heteroatom bond forming reactions of alkenes and alkynes

The group’s recent advances in catalytic carbon-to-heteroatom bond forming reactions of alkenes and alkynes are described. For the C-O bond formation reaction, a well-defined bifunctional ruthenium-amido catalyst has been successfully employed for the conjugate addition of alcohols to acrylic compounds. The ruthenium-hydride complex (PCy₃)₂(CO)RuHCl was found to be a highly effective catalyst for the regioselective alkyne-to-carboxylic acid coupling reaction in yielding synthetically useful enol ester products. Cationic ruthenium-hydride catalyst generated in-situ from (PCy₃)₂(CO)RuHCl/HBF₄·OEt₂ was successfully utilized for both the hydroamination and related C-N bond forming reactions of alkenes. For the C-Si bond formation reaction, regio- and stereoselective dehydrosilylation of alkenes and hydrosilylation of alkynes have been developed by using a well-defined ruthenium-hydride catalyst. Scope and mechanistic aspects of these carbon-to-heteroatom bond forming reactions are discussed.     

Ion mobility,phase transitions,and ion transport in potassium-ammonium hexafluorozirconates

The mobility of fluoride and ammonium ions (180–480 K) in compounds K_{2? n} (NH4)_nZrF₆ (0.2 ≤ n ≤ 1.70) was investigated by ¹⁹F and ¹H NMR. Correlations have been found between the composition of the cation sublattice, the character of ion motions, and phase transition temperature in these compounds. The hightemperature modifications with n ≥ 0.85 of the compounds are characterized by translational diffusion of fluoride and ammonium ions and by uniaxial anisotropy of the ¹⁹F magnetic shielding tensor. The electrophysical characteristics of these compounds were studied in the temperature range 300–480 K.