Formation and thermal stability of BMI-based interpenetrating polymers for gas separation membranes

Semi-interpenetrating polymer networks (semi-IPNs) were prepared by sol–gel technique through in situ polymerization of bismaleimide (BMI) in thermoplastic polyetherimide (PEI) as well as in polysulfone (PSF). This synthesis route allows arresting thermoset/thermoplastic phase separation at an early stage by solidifying the semi-IPNs through membrane phase inversion. The phase separation could be observed visually in the casting solution or by optical microscope on the surface of the produced membranes. These semi-IPNs with a density lower than their thermoplastic base polymer allowed easier water penetration during membrane phase inversion. This led to improved membrane morphology that was confirmed by scanning electron microscopy. Membranes fabricated from these semi-IPN materials had thinner skin layers and longer straight fingers perpendicular to membrane surface. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) showed that these semi-IPNs membranes have improved glass transition temperatures but a lower thermal stability. However, at ambient conditions, these membranes with their improved structure and morphology showed superior gas separation characteristics compared to base polymers. For example, the permeance was increased by 12–15 times without a significant decrease in the selectivity of oxygen over nitrogen in air separation experiments.     

Kinetic study of depolymerization of polyurethanes: A experimental and computational insight for chemical recycling

This work reports experimental and computational studies of polyurethanes depolymerization from industrial waste through a reaction with potassium hydroxide. A computational study was performed to identify the chemical reaction mechanism, which is more difficult to determine experimentally. Kinetic and thermodynamic parameters of activation process were also obtained by theoretical calculations. An experimental procedure led to products identified by ¹³C solid-state NMR analysis, which agree to the computational study. A small variation of less than 5% in the activation energy values found between the data obtained through theoretical calculations and experimental methods suggests that the described computational procedure is enough to describe the process in a satisfactory manner.     

NOR and nitroxide-based HAS in accelerated photooxidation of carbon-chain polymers; Comparison with secondary HAS: An ESRI and ATR FTIR study

Understanding processes resulting in heterogeneous degradation in polymers is of extreme importance for improving their stabilization and minimizing negative impact of photooxidation on the material properties. We adopted modern physical techniques for studies of spatial distribution of intermediates and products of photodegradation during accelerated ageing of four commodity polymers, polypropylene (PP), polyethylene (PE), polystyrene (PS) and poly(ethylene-co-norbornene) (Topas^®, TP) stabilized with hindered amine stabilizer (HAS). Concentration profiles of nitroxides inside polymer plaques along the direction perpendicular to their surface were determined by electron spin resonance imaging (ESRI) as a function of the duration of the accelerated photooxidation. We present data characterizing stabilization activity of three alkoxyamine derivatives of HAS (Tinuvin^® NOR 123, Tinuvin^® NOR 371, Flamestab^® NOR 116), Chimasorb^® 119 structurally similar to Flamestab^® NOR 116, and nitroxide-based HAS Dastib^® 1045 and compare them with the data characterizing stabilization activity of the secondary HAS (>NH) Tinuvin^® 770. ESRI data are complemented by ATR FTIR spectroscopic detection of oxidation products on the surface and inside the plaques and by data characterizing diffusive optical transmittance of the polymer plaques in the spectral region 280-400 nm (terrestrial range of the solar UV radiation).     

Automatic simulated distillation of heavy petroleum fractions up to 800°C TBP by capillary gas chromatography. Part I: Possibilities and limits of the method

The characterization of heavy petroleum fractions is essential for the design and improvement of cracking plants converting heavy feedstock into valuable “white” products. Conventional simulated distillation methods using packed columns are unsuitable for this purposes, being limited to boiling points up to about 600°C. The method presented is able to cover a boiling points interval ranging from about 150°C up to around 800°C. It employs a short, nonpolar, highly thermostable capillary column routinely operated at temperatures around 430°C. The analytical system is based on a high temperature versions of a fully automatic, capillary dedicated gas chromatograph. The experimental data demonstrate that cold on-column injection is the sole sampling system suitable for such heavy compounds. The conversion of the retention times into boiling points, based on the use of low molecular weight polyethylenes, is extremely reliable, as demonstrated by the excellent retention time reproducibilities. The lower part (up to 550–600°C TBP) of the boiling point distribution curves of heavy petroleum fractions obtained on capillary columns fits well with the corresponding distribution curves based on packed column data. For the petroleum fractions fully eluted from the column the quantitative results obtained either using internal standards or by direct processing of the elution curves are in excellent agreement (less than 0.3 weight% differences). The method has been applied to the determination of the true boiling points corresponding to short path vacuum distillation (DISTACT) cut points over 300°C.     

Surface modification of carbonyl iron powders with silicone polymers in supercritical fluid to get higher dispersibility and higher thermal stability

The surface of carbonyl iron powder (CIP) was modified in supercritical fluid with silicone polymers containing reactive Si‐OCH₃ groups. Fourier‐transformed infrared spectroscopy, X‐ray photoelectron spectroscopy, X‐ray diffraction, and thermo gravimetric analysis were adopted to characterize CIP. The dispersibility of CIP in epoxy resin matrix was evaluated by castor oil absorption factor, dynamic viscosity, Mooney viscosity, and scanning electric micrograph. The electromagnetic reflectivity of the CIP‐filled epoxy resin coatings was also checked. It was confirmed that comparing with those treated at atmosphere, the supercritical treated CIP presented higher surface carbon content, higher dispersibility, higher thermal stability, and its original crystalline structure did not change greatly. Even though it experienced a high temperature and a high pressure (250 °C, 7.8 Mpa) during supercritical treatment, it was not oxidized, and its electromagnetic reflectivity did not decrease. Copyright © 2016 John Wiley & Sons, Ltd.     

Processing studies and thermal stability of addition polymers from 1,4,5,8-tetrahydro-1,4;5,8-diepoxyanthracene and Bis-dienes

1,4,5,8-Tetrahydro-1,4;5,8-diepoxyanthracene reacts with various anthracene end-capped polymide oligomers to form Diels-Alder cycloaddition copolymers. The polymers are soluble in common organic solvents, and dehydrate thermally at temperatures of 300–350°C to give thermal oxidatively stable pentiptycene units along the polymer backbone. Because of their high softening points and good thermal oxidative stability, the polymers are candidates for matrix resins for high temperature composite applications. To assess their usefulness for such applications, several parameters have been studied affecting the properties of the final polymer. These parameters include varying the formulated molecular weight of the end-capped prepolymers, and use of meta-substituted aromatic diamine in place of some of the para-substituted diamine. Processability of the resins was studied using rheometric spectrometry, and a processing scheme was devised. Finally, several formulations of neat resins were compression molded into coupons, and evaluated for longterm stability in air at 315 and 371°C. The best combination of good processability and thermal oxidative stability was obtained from polymers synthesized with small amounts of meta-diamine substitution and higher formulated molecular weight prepolymers.     

Chemically amplified kojic acid responses of tyrosinase-based biosensor, based on inhibitory effect to substrate recycling driven by tyrosinase and -ascorbic acid

A tyrosinase-based chemically amplified biosensor, based on the substrate recycling of polyphenols driven by tyrosinase-catalyzed oxidation and chemical reduction by -ascorbic acid (AsA), has been utilized for the highly sensitive detection of inhibitors of tyrosinase such as kojic acid, benzoic and SCN⁻ ion. The amplified current response of immobilized tyrosinase-coupling oxygen electrode due to the recycling was suppressed by the addition of inhibitors, and a highly amplified response to kojic acid over other inhibitors was observed in the presence of 5 mM AsA. The amplification factor (AF) of kojic acid is substantially proportional to the AF of substrates, and the AF for 1 × 10⁻⁷ M kojic acid was increased by up to a factor of 143 when 1 × 10⁻⁵ M dopamine was used as a competitive substrate in the presence of 5 mM AsA. The amplified calibration curve of kojic acid obtained with 5 mM AsA was shifted towards more than a two decades lower concentration range compared with that of the non-amplified response, and the detection limit of kojic acid was lowered to 7 × 10⁻⁸ M.     

Inactivation and mutation induction in Saccharomyces cerevisiae exposed to simulated sunlight: evaluation of action spectra.

The effectiveness of polychromatic light irradiation was investigated for haploid yeast cells. Inactivation and mutation induction were measured in both a RAD-wildtype strain and an excision-repair defective strain. The behaviour of vegetative "wet" cells was compared to that of dehydrated cells. The aim of the study was to assess the interaction of UVC with other wavelengths in cells of different states of humidity. The irradiation procedure was therefore carried out using a solar simulator either with full spectrum or with a UVC-blocking filter (modified sunlight) added. The results were analysed on the basis of separately determined action spectra. The summation of the efficiency of individual wavelengths was compared to the values obtained from polychromatic irradiation. It is shown that the effects caused by the whole-spectrum irradiation in wet cells can be predicted sufficiently from the calculation, while dried wildtype cells exhibit higher mutation rates. Thus it can be assumed that drying-specific damage leads to lethal and mutagenic lesions which are processed in different ways, causing a synergistic behaviour in mutation induction. Irradiation of vegetative cells with modified sunlight (UVC-) results in less inactivation and lower mutation rates than were calculated. From these results it can be concluded that this antagonistic behaviour is caused by the interaction of near-UV photoproducts.     

Mechanical and thermal properties of polylactide/talc microcomposites: before and after accelerated weathering

The purpose of the first part of this study was to investigate effects of micron‐sized talc content on the properties of polylactide (PLA). PLA/talc microcomposites were compounded by melt‐mixing method via twin‐screw extruder, while specimens for testing and analyses were shaped by injection molding. It was observed that, because of the effective stiffening, strengthening, toughening mechanisms of talc, and also their nucleation agent effects for higher crystallinity, many mechanical and thermal properties were improved. In the second part of the study, effects of accelerated weathering on the behavior of PLA microcomposites with 5 wt% talc were investigated by applying ultra violet irradiation and humidity steps according to Cycle‐C of International Organization for Standardization 4892‐3 standards for durations of 100, 200, and 300 hr. Various analyses revealed that, because of the degradation mechanisms of photolysis and hydrolysis during each weathering periods, molecular weight of PLA reduced drastically, that is, mechanical properties almost vanished. Copyright © 2015 John Wiley & Sons, Ltd.     

Rapid determination of reduced and oxidized glutathione levels using a new thiol-masking reagent and the enzymatic recycling method: application to the rat liver and bile samples

A microtiter plate assay for quantitation of reduced (GSH) and oxidized (GSSG) glutathione in the rat liver tissue and bile is described. The assay is based on the established enzymatic recycling method and a new thiol-masking reagent, 1-methyl-4-vinyl-pyridinium trifluoromethane sulfonate (M4VP). Samples were first processed by homogenization with (liver) or addition of (bile) sulfosalicylic acid. The total glutathione and GSSG were then determined before and after rapid (≤2 min) and efficient (100%) masking of the GSH content of the samples with M4VP followed by the enzymatic recycling assay. The percentages of error and coefficient of variation of the assay were within the accepted guidelines, indicating the accuracy and precision of the assay in the range of 6.25–100 pmol GSH per microplate well and 2.17–140 pmol GSSG per well, with lower limit of quantitation of 6.25 and 2.17 pmol per well for GSH and GSSG, respectively. Furthermore, the recoveries of added GSH or GSSG from the liver and bile samples were accurate and precise. The assay was applied to measurement of GSH, GSSG, and GSH:GSSG ratio in the liver and serially collected bile samples in sham-operated and ischemic rat livers, demonstrating a depletion of glutathione and a decrease in the GSH:GSSG ratio as a result of ischemia. The developed assay is rapid, sensitive, accurate, and precise and is suitable for studies of the redox status of liver under physiologic and pathophysiologic conditions.     

Silole-containing linear and hyperbranched polymers: synthesis,thermal stability,light emission,nano-dimensional aggregation,and optical power limiting

Linear polyacetylenes and hyperbranched polyphenylenes carrying 1,2,3,4,5-pentaphenylsilolyl (PS) pendants are designed and synthesized. Homo-polymerization of HC≡CPS, HC≡C(CH₂)₉OPS, and C₆H₅C≡C(CH₂)₉OPS and (co)polycyclotrimerization of (HC≡C)₂PS with 1-octyne are effected by NbCl₅-, WCl₆-, MoCl₅-, and TaCl₅-based catalysts. High molecular weight linear ( 1-3 ) and hyperbranched polymers (6) are obtained in high yields (M_w up to ∼70 × 10³ and yield up to 85%). All the polymers are thermally stable, losing little weight when heated to 350°C. Whereas all the polymers emit faint light when molecularly dissolved, polymers 2 , 3 , and 6 become emissive when aggregated in poor solvents or when cooled to low temperatures. Restricted intramolecular rotations of the phenyl rings upon the axes of the single bonds linked to the silole cores may be responsible for the aggregation- or cooling-induced emission. A multilayer electroluminescent device using 3 as an active layer emits a blue light of 496 nm with maximum brightness, current efficiency, and external quantum yield of 1118 cd/m², 1.45 cd/A, and 0.55%, respectively. Polymers 6 are non-linear optically active and strongly attenuate the optical power of intense laser pulses, whose optical limiting performances are superior to that of C₆₀, a best-known optical limiter.     

Optimization of simulated moving bed chromatography with fractionation and feedback: Part I. Fractionation of one outlet

A novel modification of simulated moving bed (SMB) technology, referred to as fractionation and feedback SMB (FF-SMB), has been introduced recently. This concept is based on fractionating one or both outlet streams and feeding the off-spec fractions back into the unit alternatingly with the original feed mixture. In this paper, the optimization problem of FF-SMB realizing one outlet fractionation is considered. A mathematical optimization framework based on a detailed process model is presented which allows to evaluate quantitatively the potential of this operating scheme. Detailed optimization studies have been carried out for a difficult separation characterized by small selectivity and low column efficiency. The results reveal that the proposed fractionation and feedback regime can be significantly superior to the classical SMB chromatography, in terms of both feed throughput and desorbent consumption. The effect of the feeding sequence on the performance of FF-SMB is also examined.     

Synthesis,characterization, and polymerization of brominated benzoxazine monomers and thermal stability/flame retardance of the polymers generated

Novel monofunctional brominated benzoxazine 3‐(2,4,6‐tribromophenyl)‐3,4‐dihydro‐2H‐1,3‐benzoxazine (P‐bra) and bifunctional brominated benzoxazine 6,6′‐bis(3‐(2,4,6‐tribromophenyl)‐3,4‐dihydro‐2H‐1,3‐benzoxazinyl) isopropane (B‐bra) were prepared and highly thermally stable polybenzoxazines were obtained by the thermal cure of the corresponding benzoxazines monomers. The chemical structures of these novel monomers were confirmed by FITR, ¹H‐NMR and elemental analysis. FTIR spectra and differential scanning calorimetry (DSC) suggested that the polymerization was thermally initiated and occurred via ring‐opening of the monomer in each case. Thermogravimetric analysis (TGA) indicated that brominatation could have a profound effect on increasing char yield and on thermal degradation temperatures. The results of UL‐94 burn test showed that the polybenzoxazines prepared from P‐bra and B‐bra had good flame retardance. Copyright © 2009 John Wiley & Sons, Ltd.     

Optimization of simulated moving bed chromatography with fractionation and feedback: Part II. Fractionation of both outlets

A new improvement based on outlet fractionation and feedback has been developed for simulated moving bed (SMB) chromatography. In this contribution, this fractionation and feedback SMB (FF-SMB) concept is extended to the general scenario which integrates a simultaneous fractionation of both outlet streams. A model-based optimization approach, previously adopted to investigate single fractionation, is extended to consider this flexible fractionation policy. Quantitative optimization studies based on a specific separation problem reveal that the double fractionation is the most efficient operating scheme in terms of maximum feed throughput, while the two existing single fractionation modes discussed in our previous study are also significantly superior to the conventional SMB operation. The advantages of the double fractionation extension are further demonstrated in terms of several more detailed performance criteria. In order to evaluate the applicability of the fractionation and feedback modification, the effect of product purity, adsorption selectivity, column efficiency and column number on the relative potential of FF-SMB over SMB is examined.     

Sub-micron scale mechanical properties of polypropylene fibers exposed to ultraviolet and thermal degradation

Nanoindentation using atomic force microscopy (AFM) was conducted to investigate the affect of accelerated ultraviolet (UV) and thermal degradation on the mechanical properties of polypropylene fibers. The affect of degradation on Young’s modulus across fiber cross-sections was investigated with progressive nanoindentation from the surface to the center of the fiber. UV degradation initially increases the Young’s modulus both at the center and the surface of the fibers until 120 h of exposure with the increase being more rapid at the surface. Moduli started to decrease beyond 120 h of exposure. Wide angle x-ray scattering shows an increase of crystallinity up to 120 h of exposure and total destruction of crystallinity at 144 h. Infrared spectra showed the formation of carbonyl bonds with UV exposure. To investigate thermal degradation, the fibers were exposed to 125 °C for four weeks. Young’s modulus increased near the surface after four weeks exposure. These results support the idea that surface degradation may lead to embrittlement of textile fibers.     

Monitoring of the surface of paper samples exposed to UV light by ATR-FT-IR spectroscopy and use of multivariate control charts

The effect of exposure of paper samples to UV light was monitored by use of ATR-FT-IR spectroscopy and multivariate statistical tools. Three types of paper were tested: common laser-printer paper, newsprint, and thermal fax paper. The samples were first characterised by ATR-FT-IR spectroscopy to determine natural experimental variability. They were then exposed to UV light for 30 h and the effects of the exposure were monitored by use of the same spectroscopic technique. Finally, multivariate statistical tools were applied to the final dataset, coupled with construction of multivariate control charts, to identify the effects of UV light on the sample surfaces.     

Chemical recycling of carbon fibre reinforced epoxy resin composites in subcritical water: Synergistic effect of phenol and KOH on the decomposition efficiency

The combination of phenol and potassium hydroxide (KOH) was used to chemically recycle carbon fibre reinforced epoxy resin cured with 4,4′-diaminodiphenylmethane in subcritical water. This combination had a synergistic effect on decomposing this kind of epoxy resin. The main decomposition products from the epoxy resin were identified by means of GC-MS, and a possible free-radical reaction mechanism for the decomposition of epoxy resin is proposed. The recovered carbon fibres were characterized using single fibre tensile tests, scanning electron microscopy and X-ray photoelectron spectroscopy. Compared to virgin carbon fibres after sizing removal, the surface compositions of the recovered carbon fibres had little change and the tensile strength of the recovered carbon fibres was well retained.     

Asymmetric diethyl- and diphenylzinc additions to aldehydes by using a fluorine-containing chiral amino alcohol: a striking temperature effect on the enantioselectivity, a minimal amino alcohol loading, and an efficient recycling of the amino alcohol

A chiral pyrrolidinylmethanol derivative containing perfluoro-ponytails (5) was prepared from (S)-proline. The use of this perfluoro-substituted amino alcohol in catalytic asymmetric additions of organozinc reagents to aldehydes affords products with high enantioselectivities in both pure hexane and a mixture of hexane and FC-72 (perfluorohexane). Enantiomeric excesses up to 94 and 88 % ee have been achieved in Et(2)Zn and Ph(2)Zn additions, respectively. For the reactions in the biphasic solvent system a striking temperature effect was observed. Thus, when the temperature was raised from 0 to 40 degrees C the ee value of the product increased from 81 to 92 %. Furthermore, the catalyst loading could be remarkably low, and with only 0.1 mol % of amino alcohol 5 a product with 90 % ee was obtained in the Et(2)Zn addition to benzaldehyde in hexane. The perfluoro-ligand was easily recovered by simple phase separation, and until the ninth repetition its reuse proceeded without significant loss of enantioselectivity and reactivity.     

Thermal stability and bond dissociation energy of fluorinated polymers: A critical evaluation

Intrinsic bond dissociation energies (BDEs) of selected fluorinated polymers are critically evaluated. Two distinctive approaches were followed. In the first one, according to Wu and Rodgers [E.-C. Wu, A.S. Rodgers, J. Am. Chem. Soc. 98 (1976) 6112-6115], starting from the gas-phase enthalpy of polymerization we obtained the polymer backbone BDE through appropriate thermodynamic cycles. Revised experimental results indicate that the CC BDEs of all the polymers taken into account fall within a limited energy interval, comparable to the average experimental uncertainty. Central to the second methodology adopted, is a model compound approach. Thanks to the large number of reliable thermodynamic data available in the scientific literature and to simple end-capping rules, C₂ molecules were chosen as suitable models for infinite linear polymers and alternating copolymers between ethylene and fluorinated olefins. For partially fluorinated polymers, like polyvinylidene fluoride (PVDF), alternating ethylene-tertrafluoroethylene (ETFE) and alternating ethylene-chlorotrifluoroethylene (ECTFE), the weight loss due to HF and HCl evolution during heating experiments was successfully related to the threshold energy E_o(HX) for 1,2-elimination from chemically activated hydrofluoro and hydrofluorochlorocarbons according to the modified Rice-Rampsberger-Kassel (RRKM) unimolecular theory.     

Scaling of the segmental relaxation times of polymers and its relation to the thermal expansivity

Segmental relaxation times of polymers measured at various temperatures and pressures can be superposed as a function of temperature, using a shift factor equal to the specific volume raised to a power. The material-specific scaling exponent can be linked to the nature of the intermolecular repulsive potential for the material. We show the relationship of this scaling exponent to the thermal expansivity of the material, and how it can be used to sort out the different contributions to the temperature dependence of the local dynamics.