Flame retardant polyoxymethylene with aluminium hydroxide/melamine/novolac resin synergistic system

Polyoxymethylene (POM), having the lowest limiting oxygen index (LOI) (only ∼ 15%), is well known as the most difficult to be flame retarded plastic among all the polymers. In this paper, a novel synergistic flame retardant system composed of aluminium hydroxide (ATH), melamine (ME) and novolac resin was designed and successfully applied to flame retard POM. ATH took effects through heat absorption and water release. Both ME and novolac could react with the decomposition product of POM, formaldehyde, thus improving the flame retardancy. Particularly, novolac resin and ME played the roles of macromolecular charring agent and gas source, enhancing the flame retarding actions in the condensed and gaseous phases, respectively. This ternary synergistic system exhibited fine flame retardancy for POM (UL94 V-1 rating for 1.6 mm bar), and the obtained flame retardant POM also showed good processability and mechanical properties due to the lubrication, compatibilization and aid-dispersion effects of novolac resin.     

Towards the development of thermally latent novolac-based char formers for ABS resins

Novel novolac-based char formers for ABS resins, [PN-PI], [PN-BPI], [CN-PI] and [CN-BPI], were prepared from phenol formaldehyde novolac (PN), cresol formaldehyde novolac (CN), phenyl isocyanate (PI), and 4-biphenyl isocyanate (BPI) via a simple urethane-forming reaction. The four compounds were used as thermally latent char formers for this study. Thus, a two component system employing novolac-isocyanate adduct as a char former, and tetra-2,6-dimethyl phenyl-resorcinol diphosphate (DMP-RDP) as a phosphorous-based flame retardant was blended with ABS, and the thermal degradation behaviour and flame retardancy were determined by thermogravimetric analysis (TGA) and LOI test. The mixtures show a synergistic effect between DMP-RDP and novolac-isocyanate adduct on the flame retardance enhancement of ABS. Those containing higher molar mass CN-BPI adduct are found to be most flame retardant, and a LOI value as high as 35 is obtained.     

磷酸酯双三聚氰胺盐阻燃环氧树脂的燃烧性能和阻燃机理

以季戊四醇、三氯氧磷、三聚氰胺为原料合成了[1-氧-4-亚甲基-2,6,7-三氧-1-磷杂双环(2,2,2)辛烷]磷酸酯双三聚氰胺盐阻燃剂,将该阻燃剂加入到环氧树脂中制成阻燃环氧树脂。用TG、SEM、EDS和FT-IR进行表征,并采用极限氧指数法和垂直燃烧法测试材料的燃烧性能,结果表明,极限氧指数和垂直燃烧性能随阻燃剂含量的增加而提高,当阻燃剂含量达到30%时,氧指数达到36,垂直燃烧性能达到V-0级;阻燃剂对材料的成炭量影响不大,但改变了炭层的组成和物理性质,燃烧过程中形成的含有P、O、N的粘性高聚物将炭层连接在一起,起到了隔热、隔氧作用,发挥了凝聚相阻燃作用。此外,阻燃环氧树脂在燃烧过程中有NH3等不燃气体逸出,有效地稀释了气相中的氧气浓度,发挥了气相阻燃作用,对材料的阻燃有协同作用。     

A novel intumescent flame‐retardant LDPE system and its thermo‐oxidative degradation and flame‐retardant mechanisms

A carbonization agent, 3,9‐di (2‐hydroxyisopropyl)‐2,4,8,10‐tetraoxa‐3,9‐diphosphaspiro‐[5,5]‐undecane (SPEPO), was synthesized from pentaerythritol (PER), phosphorus trichloride, formic acid, and acetone as raw materials. The structure of SPEPO was characterized by FTIR and ¹H‐NMR. As a carbonization agent and an acid source, SPEPO can form a novel intumescent flame‐retardant (IFR) system for low density polyethylene (LDPE) together with ammonium polyphosphate (APP) and melamine phosphate (MP). The flame retardancy and thermal behavior of the IFR system for LDPE were investigated by limiting oxygen index (LOI), UL‐94 test, and thermogravimetric analysis (TGA). When the weight ratio of SPEPO, APP, and MP is 7:7:1 and their total loading level is 30%, the IFR‐LDPE presents the optimal flame retardancy (LOI value of 27.6 and UL‐94 V‐0 rating). However, SPEPO, APP, or MP can only show a very poor flame‐retardant performance when used alone. This indicates that there is a synergistic effect among SPEPO, APP, and MP. TGA results obtained in air demonstrate that SPEPO has an ability of char formation itself, and the char residue of SPEPO can reach 24 wt% at 700°C. The IFR can change the thermal degradation behavior of LDPE, enhance T_max of the decomposition peak of LDPE, and promote LDPE to form char based on the calculated and the experimental data of residues. According to the results of Py‐GC/MS in combination with FTIR of the char residues at different temperatures, a possible flame‐retardant mechanism has been proposed. Copyright © 2008 John Wiley & Sons, Ltd.     

Roles of organic intercalation agent with flame retardant groups in montmorillonite (MMT) in properties of polypropylene composites

Three kinds of organic intercalation agent containing flame retardant groups, melamine (MA), triphenylphonium (TPP) chloride, and tetradecyl trihexyl phosphonium (TTP) bromide were intercalated into montmorillonite (MMT) via cation exchange reactions. These modified MMTs are combined with intumescent systems and compounded with PP. The flame retardant and thermal properties of the PP composites are studied. The organic intercalation agents in the layers of MMT play important roles in the char formation and flame retardant properties of PP composites. MA shows a better performance in limiting oxygen index (LOI) value and TPP helps to increase UL‐94 properties, whereas TTP maintains or deteriorates the flame retardancy of polypropylene/intumescent flame retardant (IFR) composites. The LOI and UL‐94 properties increase firstly and then decrease as the content of MMT increases. The MA acts as a blowing agent and emits an inert gas to provide migration impetus, which results in a better intumescent structured and stronger char to endure heat erosion. Although TPP and TTP emit combustible gas that burn, especially for TTP as it has a more flammable aliphatic chain. The synergistic effect between MA‐MMT and IFR is better than that for TPP‐MMT and TTP‐MMT. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis of siloxane‐containing benzoxazine and its synergistic effect on flame retardancy of polyoxymethylene

A type of trialkoxysilane‐containing naphtholoxazine compound (Naph‐boz) was successfully synthesized and combined with ammonium polyphosphate/melamine (APP/ME) as an intumescent flame retardant (IFR) to improve the flame‐retardant efficiency of polyoxymethylene (POM). The Underwriters Laboratories 94 (UL94) vertical burning test, limiting oxygen index (LOI), cone calorimeter, thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and Raman spectral analysis were used to study the flame‐retardant properties and related mechanism. The results showed that the formulation with 20 wt.% of APP, 6 wt.% of ME, and 4 wt.% of Naph‐boz passed UL94 V‐1 rating, and the LOI value was improved to 40.3%. Compared with pure POM, the IFR with Naph‐boz had greater reduction in peak heat release rate (lower 74.9%) and total heat release (lower 40.2%). SEM images showed that compact and reinforcing charred layer was formed during the POM/IFR/4Naph‐boz samples combustion, which was beneficial at reducing and maintaining low combustion parameters throughout the cone calorimeter test. The synergistic flame‐retardant effect between Naph‐boz and APP/ME was considered as the reason for the improvement in flame retardancy POM. Furthermore, because of the Naph‐boz was conducive to the compatibility between the flame retardants and matrix, the notched Izod impact strength of POM/IFR/4Naph‐boz composite was higher than that of POM/IFR system.     

Red phosphorus acts as second acid source to form a novel intumescent-contractive flame-retardant system on ABS

A novel halogen-free flame retardant prepared by poly(p-ethylene terephthalamide) and ammonium polyphosphate (APP) on acrylonitrile–butadiene–styrene (ABS) resin has a good flame retardancy when loading is 30 %; but, once the mass fraction is <30 %, the system does not maintain outstanding flame retardancy. To improve the efficiency of this kind of flame retardant and LOI values, higher thermal stability acid source-red phosphorus is introduced. It is found that a little quantity of red phosphorus will improve the flame retardancy of ABS remarkably and will change the process of charring; when the mass fractions of APP, PPTA, and red phosphorus are only 15, 5, and 2 %, respectively, though the LOI of flame-retardant ABS is 27, UL-94 vertical burning test still reach V-0. Thermogravimetric analysis data show that red phosphorus changes the thermal degradation behavior of IFR-ABS system, shrink digital photo display system, and yield more stable residue at higher temperature; Fourier transform infrared results and scanning electron microscopic micrographs show that red phosphorus can catalyze the charring and form much denser char to improve the flame-retardant performance of the materials.     

超支化聚磷酸酯阻燃剂对尼龙6的成炭促进作用

以三氯氧磷和双酚A为原料制备了具有超支化结构的聚磷酸酯阻燃剂(HPPEA),通过红外(FTIR),核磁(1H-NMR,31P-NMR)及热重分析表征了产物的结构和热稳定性.将HPPEA与三聚氰胺聚磷酸盐(MPP)进行复配,通过熔融共混法制备阻燃尼龙6,通过氧指数法和垂直燃烧法测试了其阻燃性能,采用热重分析(TGA)研究...     

Synergistic effect of zeolite 4A on thermal,mechanical and flame retardant properties of intumescent flame retardant HDPE composites

The combination of synergistic agent with intumescent flame retardant (IFR) systems provides a promising way to prepare high performance IFR composites. In this study, the effects of the synthetic zeolite 4 A in combination with the IFR system consisting of ammonium polyphosphate (APP) and tris (2-hydroxyethyl) isocynurate (THEIC) on thermal degradation, mechanical properties, flame retardancy and char formation of high-density polyethylene composites were investigated by limiting oxygen index (LOI) measurement, cone calorimetry, scanning electron microscopy and laser Raman spectroscopy. The LOI value of HD/FR/Z-0.5 composite with an optimum content of 0.5 wt. % zeolite 4 A and 25 wt. % of total flame retardant reaches 26.3 %. A low loading of zeolite 4 A can improve the bench-scale combustion performance as determined by cone calorimetry, and promote the formation of more compact char residue with a highly graphitic structure. However, a low loading of zeolite in combination with the IFR system consisting of APP and THEIC produces no significant changes in mechanical performance.     

Great enhancement of efficiency of intumescent flame retardants by titanate coupling agent and polysiloxane

Modified intumescent flame retardants (MIFRs) and polysiloxane (APID) have been used in combination to enhance the flame retardancy of polypropylene (PP). The IFR system was composed of melamine (MEL), ammonium polyphosphate (APP) and pentaerythritol (PER). Aimed to improve the thermal stability of the IFR and its dispersivity in PP, titanate coupling agent NDZ‐201 was used to modify the IFRs via ball milling. MIFRs and APID have a cooperative effect on the flame retardant properties of PP. With 25 wt.% of MIFR and APID, the flame retardant sample (PPMA) was rated V0 for UL‐94, the LOI value was 34.3%, and the peak heat release rate (PHRR) was reduced by 80% in cone calorimeter test. In addition, APID could improve the compatibility of MIFR with the PP matrix, thereby increasing the mechanical properties of PP blends. The flame retardant effect of APID and MIFR in PP was presented in the condensed phase resulting in a rigid, thermally stable and expanded carbon layer due to different char structures.     

Synthesis and properties of a phosphorus-containing flame retardant epoxy resin based on bis-phenoxy (3-hydroxy) phenyl phosphine oxide

A reactive phosphorus-containing compound, bis-phenoxy (3-hydroxy) phenyl phosphine oxide (BPHPPO) was first successfully synthesized to produce the phosphorus-containing flame retardant epoxy resin (BPHPPO-EP). The chemical structures were characterized from FTIR, MS, NMR spectra and elemental analyses. Thermal degradation behaviors and flame retardant properties of the cured epoxy resins were investigated from the thermogravimetric analysis (TGA) and the limiting oxygen index (LOI) test using 4,4′-diaminodiphenylsulfone (DDS) as curing agent. The high char yields and the high limiting oxygen index values were found to certify the great flame retardancy of this phosphorus-containing epoxy resin.     

Thermal and flame retardant properties of epoxy resin cured by a novel phosphorus-containing 4,4′-bisphenol novolac curing agent

A novel flame retardant curing agent for epoxy resin (EP), i.e., a DOPO (9,10-dihydro-9-oxa-10-phosphaphenan-threne-10-oxide)-containing 4,4'-bisphenol novolac (BIP-DOPO) was synthesized and characterized by Fourier transform infrared (FTIR), ¹H NMR, ³¹P NMR spectroscopy, and gel permeation chromatography. The epoxy resin cured by BIP-DOPO itself or its mixture with a commonly used bisphenol A-formaldehyde novolac resin (NPEH720) was prepared. The flame retardancy of the cured EP thermosets were studied by limiting oxygen index (LOI), UL 94 and cone calorimeter test (CCT), and the thermal properties by thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC). The results show that the cured epoxy resin EPNP/BI/3/1, which contains 2.2% phosphorus, possesses a value of 26.2% and achieves the UL 94 V-0 rating. The data from cone calorimeter test demonstrated that the peak release rate, average heat release rate, total heat release decline sharply for the flame retarded epoxy resins, compared with those of pure ones. DSC results show that the glass-transition temperatures of cured epoxy resins decrease with increasing phosphorus content. TGA indicates that the incorporation of BIP-DOPO promotes the decomposition of epoxy resin matrix ahead of time and leads to higher char yield. The surface morphological structures of the char residues reveal that the introduction of BIP-DOPO benefits to the formation of a continuous and solid char layer on the epoxy resin material surface during combustion.     

可膨胀石墨阻燃体系在聚丙烯中的作用

采用可膨胀石墨(EG)为主阻燃剂,包裹红磷(MRP)为阻燃协效剂制备阻燃聚丙烯(PP)。在mEG∶mMRP≥2时,阻燃效果最佳。阻燃剂(FR)含量达到30%后,阻燃效果大幅度提高,氧指数大于28。采用热失重和流变学方法分析了炭层质量,探讨了在mEG∶mMRP≥2时,阻燃效率最高的原因。相容剂马来酸酐接枝聚丙烯(PP-g-MAH)能够改善阻燃剂和聚丙烯之间的相容性,提高粘结力,改善炭层质量,提高材料的氧指数,PP-g-MAH用量为30%时,材料的氧指数达到31.4。     

磷杂菲类阻燃剂的合成及其与聚磷酸铵复合膨胀体系对环氧树脂的阻燃性能研究

以9,10-二氢-9-氧杂-10-磷杂菲-10-氧化物(DOPO)、五硫化二磷(P2S5)为原料合成9,10-二氢-9-氧杂-10-磷杂菲-10-硫化物(DOPS),并将DOPS与聚磷酸铵(APP)组成复合阻燃剂,用于环氧树脂(EP)的阻燃改性.通过氧指数(LOI)、垂直燃烧(UL-94)、热失重(TGA)、锥形量热(CONE)和扫描电镜(SEM)等方法对改性后的环氧树脂的阻燃性能和阻燃机理进行了测试和分析.实验结果表明,DOPS/APP阻燃体系对EP具有很好的阻燃性能,且复配阻燃剂的阻燃效果比单一的阻燃剂阻燃效果好;其中,当阻燃剂的总添加量达到30%时即W_(DOPS)=10%、W_(APP)=20%时,阻燃EP复合材料的LOI值可达到29.2%,垂直燃烧等级达到UL-94 V-0级,残炭量可达49.3%.     

Phosphorylated cellulose/Fe3+ complex: A novel flame retardant for epoxy resins

A novel flame retardant containing cellulose, phosphorus and ferrum complex (Cell‐P‐Fe) was successfully synthesized and then it was used as flame retardants in epoxy resins (EP). Due to the present of acid sources and carbon sources, the Cell‐P‐Fe exhibits improved thermal stability and flame retardant properties. The EP/Cell‐P‐Fe composites with 10 wt% of Cell‐P‐Fe show remarkably improved LOI and UL‐94 values compared with the flame retardants without ferrum. At the loading of 10.0 wt% flame retardants, the char yield for EP/Cell‐P‐Fe composites increased to 29.1 wt%, indicating the improved thermal stability at high temperature. Moreover, thermogravimetric analysis, morphology of char residues and FTIR results demonstrate that stable char layers are formed on the surface of the composites during the combustion, attributing to the catalytic carbonization effect of Fe and phosphorus and the present of cellulose as carbon source. The stable char layers, which can protect the underlying materials from heat and oxygen, play an important role in the flame retardancy enhancement.     

Combustion properties and thermal degradation behavior of polylactide with an effective intumescent flame retardant

An intumescent flame retardant spirocyclic pentaerythritol bisphosphorate disphosphoryl melamine (SPDPM) has been synthesized and its structure was characterized by Fourier transformed infrared spectrometry (FTIR), ¹H and ³¹P nuclear magnetic resonances (NMR). A series of polylactide (PLA)-based flame retardant composites containing SPDPM were prepared by melt blending method. The combustion properties of PLA/SPDPM composites were evaluated through UL-94, limiting oxygen index (LOI) tests and microscale combustion calorimetry (MCC) experiments. It is found that SPDPM integrating acid, char and gas sources significantly improved the flame retardancy and anti-dripping performance of PLA. When 25 wt% flame retardant was added, the composites achieved UL-94 V0, and the LOI value was increased to 38. Thermogravimetric analysis (TGA) showed that the weight loss rate of PLA was decreased by introduction of SPDPM. In addition, the thermal degradation process and possible flame retardant mechanism of PLA composites with SPDPM were analyzed by in situ FTIR.     

Flame‐retardant performance and mechanism of epoxy thermosets modified with a novel reactive flame retardant containing phosphorus,nitrogen, and sulfur

A novel phosphorus‐containing, nitrogen‐containing, and sulfur‐containing reactive flame retardant (BPD) was successfully synthesized by 1‐pot reaction. The intrinsic flame‐retardant epoxy resins were prepared by blending different content of BPD with diglycidyl ether of bisphenol‐A (DGEBA). Thermal stability, flame‐retardant properties, and combustion behaviors of EP/BPD thermosets were investigated by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), limited oxygen index (LOI) measurement, UL94 vertical burning test, and cone calorimeter test. The flame‐retardant mechanism of BPD was studied by TGA/infrared spectrometry (TGA‐FTIR), pyrolysis‐gas chromatography/mass spectrometry (Py‐GC/MS), morphology, and chemical component analysis of the char residues. The results demonstrated that EP/BPD thermosets not only exhibited outstanding flame retardancy but also kept high glass transition temperature. EP/BPD‐1.0 thermoset achieved LOI value of 39.1% and UL94 V‐0 rating. In comparison to pure epoxy thermoset, the average of heat release rate (av‐HRR), total heat release (THR), and total smoke release (TSR) of EP/BPD‐1.0 thermoset were decreased by 35.8%, 36.5% and 16.5%, respectively. Although the phosphorus content of EP/BPD‐0.75 thermoset was lower than that of EP/DOPO thermoset, EP/BPD‐0.75 thermoset exhibited better flame retardancy than EP/DOPO thermoset. The significant improvement of flame retardancy of EP/BPD thermosets was ascribed to the blocking effect of phosphorus‐rich intumescent char in condensed phase, and the quenching and diluting effects of abundant phosphorus‐containing free radicals and nitrogen/sulfur‐containing inert gases in gaseous phase. There was flame‐retardant synergism between phosphorus, nitrogen, and sulfur of BPD.     

环三磷腈-DOPO大分子阻燃剂的 合成及阻燃环氧树脂性能

通过取代反应、 缩合反应和加成反应等合成了一种无机-有机杂化大分子阻燃剂 六-[4-(N-苯基氨基-DOPO-次甲基)苯氧基]环三磷腈(DOPO-PCP), 并利用傅里叶变换红外光谱、 ¹H和 ³¹P核磁共振波谱对其进行结构表征. 将DOPO-PCP用于环氧树脂(DGEBA)阻燃, 得到环氧树脂阻燃固化物, 通过极限氧指数(LOI)、 垂直燃烧测试(UL-94)、 热重分析与锥形量热(Cone)测试等对阻燃环氧树脂固化物的热稳定性及燃烧性能进行分析; 利用扫描电子显微镜及Mapping观察并分析了燃烧碳层的形貌与元素分布. 研究结果表明, 产物的结构符合设计的DOPO-PCP分子结构; 当DOPO-PCP在DGEBA中添加量(质量分数)达12.2%时, 磷含量为1.3%, 制得的阻燃环氧树脂固化物垂直燃烧测试通过UL-94 V-0级, LOI值为36.2%; Cone测试结果表明, DOPO-PCP的添加有效降低了DGEBA燃烧时热量与烟气的释放, 且在高温下碳残余量显著增加. 研究表明DOPO-PCP兼具气相和凝固相阻燃机理, 对DGEBA有良好的阻燃性能.     

软质聚氨酯泡沫塑料用无卤阻燃剂的研究

本文以羟基苯氧膦丙烯酸(CEPP)和三聚氰胺(MA)为原料合成了一种含磷、氮无卤阻燃剂(CMA),采用FT-IR表征了阻燃剂的化学结构,并将该阻燃剂用于软质聚氨酯泡沫(FPUF)的阻燃。用扫描电镜(SEM)研究了阻燃剂的加入对FPUF的形态的影响,通过LO I和垂直燃烧(Cal.117A)测试研究了该阻燃剂对FPUF的阻燃效果。结果表明,CMA可以有效提高FPUF的阻燃性:当CMA的添加量为10%时,FPUF即可通过Cal.117A测试,其LO I值也从17.3提高到23.0;随阻燃剂添加量的增加,FPUF的阻燃性能也逐渐提高。TG测试结果表明CMA的加入对FPUF的热稳定性没有多大影响。     

一种无卤阻燃ABS体系的阻燃性能研究

ABS是本世纪40年代发展起来的通用型热塑性材料[1],它有良好的力学性能,耐化学腐蚀、易加工等优点[2-6].