Photooxidation of polypropylene/layered double hydroxide nanocomposites: Influence of intralamellar cations

The influence of layered double hydroxides (LDHs) on the photooxidation of polypropylene (PP)/LDH nanocomposites was studied under irradiation at long wavelengths (λ > 300 nm, 60 °C and in the presence of oxygen). The influence of hybrid LDHs containing different divalent cations (Mg, Zn or both Mg and Zn) on the photooxidation mechanism of PP and on the rates of oxidation of the matrix was characterised based on infrared analysis. The presence of LDHs modifies the photoproducts accumulating in the PP and the rates of oxidation of PP were changed depending on the divalent cations in the LDH layers. Whereas natural clays, such as montmorillonite (MMt), can lead to a faster degradation of the materials, LDHs (Zn₂-Al-DS, for example) appear to have no inductive effect on polymer oxidation.     

Cross-linking assessment after accelerated ageing of ethylene propylene diene monomer rubber

The ageing of filled and cross-linked ethylene propylene diene elastomer (EPDM) has been studied under accelerated UV irradiation (λ ≥ 290 nm) at 60 °C, thermal ageing at 100 °C and in nitric acid vapours for different time intervals. Hardness measurements were performed. DSC-thermoporosimetry was used to estimate the mesh size distribution and cross-linking densities for each ageing. The development of functional groups was monitored by ATR spectroscopy. An increase in oxidation with exposure time after the different types of ageing was observed. The thermal stability of EPDM was assessed by TGA and evolved volatile gases were identified using FTIR spectroscopy.     

Influence of nanodispersed boehmite on polypropylene photooxidation

Nanocomposites containing pure or organically modified nanoboehmites of different sizes were prepared by melt compounding with polypropylene. The samples were UV light irradiated in artificial accelerated conditions representative of solar irradiation (λ > 300 nm) at 60 °C in air. The chemical modifications resulting from photooxidation were followed by IR and UV-visible spectroscopies. The presence of pristine nanoboehmites was shown to change the rate of oxidation of polypropylene by reducing the oxidation induction period due to the presence of residual processing antioxidant. The differences of the oxidation induction periods between the nanocomposites and the pristine polymer disappear after solvent extraction of the antioxidant. The inefficiency of traditional antioxidant in retarding the photooxidation of polypropylene containing nanodispersed boehmite is proved. Antioxidant migration to the boehmite surface induced by the preferential interaction with the polar filler is proposed as an explanation. The oxidative behaviour of the organically modified boehmites was shown to depend on the type of organic substituent. p-Toluenesulfonate reduces the adsorption of antioxidants while the presence of a long-chain alkyl benzensulfonate increased the oxidation rate by generation of radical initiators.     

Influence of nanodispersed hydrotalcite on polypropylene photooxidation

Nanocomposites containing hydrotalcite and prepared by melt compounding with polypropylene were UV-light irradiated in artificial accelerated conditions representative of solar irradiation (λ > 300 nm) at 60 °C in air. The chemical modifications resulting from photooxidation were followed by IR and UV-visible spectroscopies.The presence of hydrotalcite was shown to change the global rate of photooxidation of polypropylene by reducing the oxidation induction time and increasing the oxidation rate. The differences of the oxidation induction time disappeared after solvent extraction of the antioxidant. They were attributed to a quenching of the antioxidant activity resulting from a migration onto the filler surface induced by the preferential interaction with the polar hydrotalcite. Extracting the antioxidant did not change the oxidation rate at the permanent regime. The increase of the oxidation rate was attributed to transition metal ions, present as impurities in hydrotalcite, which can accelerate the oxidation of the polymer by various mechanisms including a catalysed decomposition of hydroperoxides.     

Polymer/carbon nanotube nanocomposites: Influence of carbon nanotubes on EVA photodegradation

The influence of carbon nanotubes on the photodegradation of EVA/carbon nanotube nanocomposites was studied by irradiation under photooxidative conditions (at λ > 300 nm, at 60 °C and in the presence of oxygen). The influence of the nanotubes on both the photooxidation mechanism of EVA and the rates of oxidation of the matrix was characterized on the basis of infrared analysis. On one hand, it was shown that the carbon nanotubes act as inner filters and antioxidants, which contribute to reduction in the rate of photooxidation of the polymeric matrix. On the other hand, it was shown that light absorption could provoke an increase in the local temperature and then induce the photooxidation of the polymer. The competition between these three effects determines the global rate of photooxidation of the polymeric matrix. Several factors are involved, the concentration of the carbon nanotubes, the morphology of the nanotubes and the functionalization of the nanotube surface.     

Effect of micron and nano-grade titanium dioxides on the efficiency of hindered piperidine stabilizers in a model oxidative reaction

Polymer additives often show many side reactions during the ageing of polymers which change the useful life-time of the materials. In this regard nano-grade titanium dioxide additives with high surface areas and nano-particle sizes appeared in recent years to be used in polymers where the side reactions have been found to markedly influence mechanisms of ageing. The interaction between titanium dioxide pigments and stabilizers therefore is proposed as a field of great importance.In this paper the influence of nano and micron particle grade anatase and rutile titanium dioxide pigments on the efficiency of a hindered amine stabilizer, Chimassorb 119FL and Chimassorb 119 has been investigated in the system comprising the model radical reaction of cumene initiated (2,2′-azobisisobutyronitrile, AIBN) oxidation. This model reaction was designed to simulate the thermo-oxidative processes in polymers.Kinetic measurements of oxidation rates in the absence of the pigments showed strong retarding activity of the stabilizers under conditions of the model experiments. The rates depend linearly on the reciprocal square root of the concentration of the stabilizers over a sufficiently wide range thereby fitting the mechanism of addition of cumylalkyl R radicals to the Chimassorb molecules. The rate constants for the addition of cumyl R radicals to Chimassorb 119FL and Chimassorb 119 were determined to be k_(333 K) = (1.4 ± 0.2) × 10⁸ and (1.2 ± 0.2) × 10⁸ M⁻¹ s⁻¹, respectively. Hence the Chimassorb 119 family is relatively powerful retarders of thermal oxidation.Further measurements of oxidation rates in the presence of titanium dioxide particles showed that there is a significant reduction in the retarding action of the stabilizers in the presence of titanium dioxides. It occurs as a result of the initiating action of titanium additives producing an additional concentration of free radicals and inducing an additional oxidation rate which may weaken the initial inhibiting efficiency of the added hindered piperidine stabilizers. The titanium nano-samples added at a 1-wt.% into the oxidized condensed system are able to completely decrease the initial inhibiting efficiency of the stabilizers. In terms of the degree of the sensitising action the titanium dioxides can be ordered as: nano-rutile > nano-anatase treated hydroxyapatite > nano-anatase untreated > micro-anatase > micro-rutile.The behaviour of titanium dioxide particles incorporated with hindered piperidine HAS stabilizers in condensed systems may thus be used for the assessment of their performance during the thermo-oxidative degradation of polymers.     

Aerobic oxidation of primary alcohols in the presence of activated secondary alcohols

Chemoselective aerobic oxidation of primary alcohols in the presence of activated secondary alcohols was effected under irradiation of visible light by using (nitrosyl)Ru(salen) complex 6 that possesses bulky 1-ethyl-1-methylpropyl groups at C3, C3′, C5 and C5′, as catalyst. For example, oxidation of n-decanol was >50 times faster than oxidation of 1-phenylethanol at 10 °C.     

Modelling light stabilizers as thermal antioxidants

Light stabilizers often display some degree of antioxidant activity against thermal degradation of polymers both in the solid state and the melt. Although this capacity to date has been documented in some instances such features have not been kinetically modelled for many light stabilizers. An understanding of the mechanisms of this activity is crucial in polymer materials due to the close link between prior thermal behaviour and post stabilisation.This paper considers the potential antioxidant activity of three representative UV stabilizers using a model system initiated (2,2′-azo-bisisobutyronitrile, AIBN) cumene oxidation. Kinetic measurements of oxidation rates in the presence of the stabilizers showed that the antioxidant activity as well as the mechanism and mode of inhibition was different for each of the stabilizers. Thus, whilst a triazine UV absorber (Cyasorb UV 1164) did not display any antioxidant activity, a hindered phenol (Cyasorb UV 2908) operated as a peroxy radical acceptor, and a hindered amine (Cyasorb 3529) retarded the model reaction without an induction period like many HAS stabilizers.The Cyasorb 2908 revealed weak antioxidant activity with a rate constant for the addition of cumylperoxy RO₂ radicals to the functional group of the stabilizer k₇ = 10^6.2±0.1 e^{−(3900±600)/RT}, however, the inhibition index f (80 °C) is significantly higher than that of the commercial phenolic antioxidant Irganox 1076. Oxidation rate profiles in the presence of Cyasorb 3529 displayed a strong retarding activity by the stabilizer under conditions of the model experiments. The rates were found to depend linearly on the reciprocal square root of the concentration of the stabilizer over a sufficiently wide range thereby fitting the mechanism for the addition of cumylalkyl R radicals to the Cyasorb molecules. The rate constants for the addition of cumyl R radicals to the Cyasorb were determined to be k_(333-353 K) = (2.0 ± 0.8) × 10⁸ M⁻¹ s⁻¹. This value surpasses even the rate constants for other related HAS Chimassorb [Zeynalov EB, Allen NS. Effect of micron and nano-grade titanium dioxides on the efficiency of hindered piperidine stabilizers in a model oxidative reaction. Polym Degrad Stab 2006;91(4):931-9.] stabilizers and it follows that Cyasorb 3529 is a powerful retarder of thermal oxidation.     

A sensitive amperometric sensor for hydrazine and hydrogen peroxide based on palladium nanoparticles/onion-like mesoporous carbon vesicle

Onion-like mesoporous carbon vesicle (MCV) with multilayer lamellar structure was synthesized by a simply aqueous emulsion co-assembly approach. Palladium (Pd) nanoparticles were deposited on the MCV matrix (Pd/MCV) by chemical reduction of H₂PdCl₄ with NaBH₄ in aqueous media. Pd(X)/MCV (X wt.% indicates the Pd loading amount) nanocomposites with different Pd loading amount were obtained by adjusting the ratio of precursors. The particular structure of the MCV results in efficient mass transport and the onion-like layers of MCV allows for the obtainment of highly dispersed Pd nanoparticles. The introduction of Pd nanoparticles on the MCV matrix facilitates hydrazine oxidation at more negative potential and delivers higher oxidation current in comparison with MCV. A linear range from 2.0 × 10⁻⁸ to 7.1 × 10⁻⁵ M and a low detection limit of 14.9 nM for hydrazine are obtained at Pd(25)/MCV nanocomposite modified glassy carbon (GC) electrode. A nonenzymatic amperometric sensor for hydrogen peroxide based on the Pd(25)/MCV nanocomposite modified GC electrode is also developed. Compared with MCV modified GC electrode, the Pd(25)/MCV nanocomposite modified GC electrode displays enhanced amperometric responses towards hydrogen peroxide and gives a linear range from 1.0 × 10⁻⁷ to 6.1 × 10⁻³ M. The Pd(25)/MCV nanocomposite modified GC electrode achieves 95% of the steady-current for hydrogen peroxide within 1 s. The combination of the unique properties of Pd nanoparticles and the porous mesostructure of MCV matrix guarantees the improved analytical performance for hydrazine and hydrogen peroxide.     

Thermal and mechanical properties of in situ polymerized PS/EPDM blends

In situ polymerized PS/EPDM blends were prepared by dissolving poly(ethylene-co-propylene-co-2-ethylidene-5-norbornene) (EPDM) in styrene monomer, followed by bulk polymerization at 60 °C and 80 °C . EPDM has excellent resistance to such factors as weather, ozone and oxidation, attributed to its non-conjugated diene component, and it could be a good alternative for substituting polybutadiene-based rubbers in PS toughening. The in situ polymerized blends were characterized by dynamic mechanical analysis, thermogravimetric analysis, gel permeation chromatography, and tensile and Izod impact resistance tests. The PS/EPDM blends are immiscible and present two phases, a dispersed elastomeric phase (EPDM) in a rigid PS matrix whose phase behavior is strongly affected by the polymerization temperature. Mechanical properties of the blends are influenced by the increase in the average size of EPDM domains with the increase in the polymerization temperature and EPDM content. The blends polymerized at 60 °C containing 5 wt% of EPDM presents an increase in the impact resistance of 80% and containing 17 wt% of EPDM presents an increase in the strain at break of 170% in comparison with the value of PS. The blend polymerized at 80 °C containing 17 wt% of EPDM presents an increase in the strain at break of 480% and in impact resistance of 140% in comparison with the value of PS.     

Direct electrocatalytic oxidation of nitric oxide and reduction of hydrogen peroxide based on α-Fe2O3 nanoparticles-chitosan composite

α-Fe₂O₃ nanoparticles prepared using a simple solution-combusting method have been dispersed in chitosan (CH) solution to fabricate nanocomposite film on glass carbon electrode (GCE). The as-prepared α-Fe₂O₃ nanoparticles were characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM). The nanocomposite film exhibits high electrocatalytic oxidation for nitric oxide (NO) and reduction for hydrogen peroxide (H₂O₂). The electrocatalytic oxidation peak is observed at +0.82 V (vs. Ag/AgCl) and controlled by diffusion process. The electrocatalytic reduction peak is observed at −0.45 V (vs. Ag/AgCl) and controlled by diffusion process. This α-Fe₂O₃-CH/GCE nanocomposite bioelectrode has response time of 5 s, linearity as 5.0 × 10⁻⁷ to 15.0 × 10⁻⁶ M of NO with a detection limit of 8.0 × 10⁻⁸ M and a sensitivity of −283.6 μA/mM. This α-Fe₂O₃-CH/GCE nanocomposite bioelectrode was further utilized in detection of H₂O₂ with a detection limit of 4.0 × 10⁻⁷ M, linearity as 1.0 × 10⁻⁶ to 44.0 × 10⁻⁶ M and with a sensitivity of 21.62 μA/mM. The shelf life of this bioelectrode is about 6 weeks under room temperature conditions.     

The influence of UV irradiation on the properties of chitosan films containing keratin

The mechanical, thermal and surface properties of chitosan and chitosan containing keratin hydrolysates have been studied and the influence of UV irradiation on these properties has been compared. The surface properties of chitosan films containing 5%, 15% and 30% of keratin hydrolysate before and after UV irradiation (λ = 254 nm) were investigated by means of contact angle measurements allowing the calculation of surface free energy. The chemical and structural changes during UV irradiation were studied by UV-vis and FTIR-ATR spectroscopy.The changes in mechanical properties such as breaking strength, percentage elongation and Young’s modulus have been investigated. The results have shown that the mechanical properties of the chitosan/keratin films were greatly affected by UV irradiation, but the level of the changes of these properties was smaller in the blend than in pure chitosan and strongly dependent on the time of irradiation and composition of the samples. The contact angle and the surface free energy were altered by UV irradiation, which indicates photooxidation and an increase of polarity of specimens. The range of these changes point to greater susceptibility of chitosan to photooxidation in the presence of keratin.     

Photochemical stability of poly(vinyl pyrrolidone) in the presence of collagen

The photochemical stability of poly(vinyl pyrrolidone) (PVP) in the presence of 1%, 3% and 5% of collagen has been studied by UV-vis spectroscopy, Fourier transform infrared spectroscopy (FTIR), thermogravimetry analysis (TG) and derivative thermogravimetry (DTG). Surface properties have been studied by contact angle measurements. PVP samples and samples containing 1%, 3% and 5% of collagen were irradiated with UV light of wavelength λ = 254 nm in air for up to 24 h. The amount of gel created during UV irradiation was estimated.PVP in the presence of 1%, 3% and 5% of collagen is less stable both thermally and photochemically. Collagen enhances photochemical processes leading to crosslinking of PVP. The contact angle measurements and values of surface free energy showed that the wettability of PVP films was changed by the addition of collagen and by UV irradiation. The increase of polarity of samples indicates an efficient photooxidation on the surface upon UV irradiation.     

Preparation of cobalt-tetraphenylporphyrin/reduced graphene oxide nanocomposite and its application on hydrogen peroxide biosensor

A novel cobalt-tetraphenylporphyrin/reduced graphene oxide (CoTPP/RGO) nanocomposite was prepared by a π–π stacking interaction and characterized by ultraviolet–visible absorption spectroscopy (UV–vis), Fourier transform infrared spectroscopy (FTIR) and electrochemical impedance spectroscopy (EIS). The CoTPP/RGO nanocomposite exhibited high electrocatalytic activity both for oxidation and reduction of H₂O₂. The current response was linear to H₂O₂ concentration with the concentration range from 1.0 × 10⁻⁷ to 2.4 × 10⁻³ mol L⁻¹ (R = 0.998) at the reductive potential of −0.20 V and from 1.0 × 10⁻⁷ to 4.6 × 10⁻⁴ mol L⁻¹ (R = 0.996) at the oxidative potential of +0.50 V. The H₂O₂ biosensor showed good anti-interfering ability towards oxidative interferences at the oxidative potential of +0.50 V and good anti-interfering ability towards reductive interferences at the reductive potential of −0.20 V.     

Microwave-assisted methylation of phenols with DMF-DMA

We evaluated the potential of N,N-dimethylformamide dimethylacetal (DMF-DMA) as a methylating agent for a library of para-substituted phenols under microwave irradiation. The rate of reaction was dictated by the electronic nature of the para-substituent. With an electron-withdrawing group the reaction was completed within 30 min. For electron-donating groups, the reaction times were 60 min. Esterification and enamino-ketone formation was also observed with carboxylic acid and ketone functional groups, respectively.     

Electrochemical behaviors of guanosine on carbon ionic liquid electrode and its determination

The electrochemical behaviors of guanosine on the ionic liquid of N-butylpyridinium hexafluorophosphate (BPPF₆) modified carbon paste electrode (CPE) was studied in this paper and further used for guanosine detection. Guanosine showed an adsorption irreversible oxidation process on the carbon ionic liquid electrode (CILE) with the oxidation peak potential located at 1.12 V (vs. SCE) in a pH 4.5 Britton-Robinson (B-R) buffer solution. Compared with that on the traditional carbon paste electrode, small shift of the oxidation peak potentials appeared but with a great increment of the oxidation peak current on the CILE, which was due to the presence of ionic liquid in the modified electrode adsorbed the guanosine on the surface and promoted the electrochemical response. The electrochemical parameters such as the electron transfer coefficient (α), the electron transfer number (n), and the electrode reaction standard rate constant (k_s) were calculated as 0.74, 1.9 and 1.26 × 10⁻⁴ s⁻¹, respectively. Under the optimal conditions the oxidation peak current showed a good linear relationship with the guanosine concentration in the range from 1.0 × 10⁻⁶ to 1.0 × 10⁻⁴ mol/L by cyclic voltammetry with the detection limit of 2.61 × 10⁻⁷ mol/L (3σ). The common coexisting substances showed no interferences to the guanosine oxidation. The CILE showed good ability to distinguish the electrochemical response of guanosine and guanine in the mixture solution. The urine samples were further detected by the proposed method with satisfactory results.     

Photooxidative behaviour of polyethylene/polyamide-6 blends

The photochemical behaviour of several polyethylene/polyamide-6 blends was studied under conditions of artificial accelerated weathering. Particular attention was paid to five different compositions ranging from pure polyethylene to pure polyamide with blends of PE/PA-6 of various compositions: 75/25, 50/50 and 25/75 wt/wt%. Analysis by infrared spectroscopy of the chemical modifications caused by photooxidation showed that exposing the polyethylene/polyamide-6 blends to UV-light irradiation led to the formation of oxidation photoproducts in both polymer phases. In agreement with both the mechanical and spectroscopic analyses, the photooxidation rate of the blends was observed to be much higher than that of the homopolymers. The results given in this paper suggest that photooxidation of the PE/PA blends starts in the polyamide phase and that the subsequent photooxidation of the polyethylene phase may be initiated by the radicals coming from the oxidation of PA.     

Photochemical behavior of inorganic and organic selenium compounds in various aqueous solutions

Selenium possesses interesting chemical, biochemical and geochemical behaviors. However, studies of its photochemical properties in aqueous systems are scarce. A better understanding of these phenomena is of great importance for further application of such properties to selenium speciation. In this work, the photochemical behavior of selenium and some of its organic compounds have been systematically studied in various aqueous matrices under UV irradiation at 300 nm. It was observed that the photochemical oxidation rate of Se(IV) to Se(VI) was greatly enhanced in the presence of HN0₃ at ≥1 × 10⁻³ M, but not by NaNO₃. However this photo-oxidation could be inhibited by the presence of Cl⁻. Under UV irradiation, organoselenium compounds went through two successive photochemical reactions in pure water: a direct photolysis (photo-cleavage) followed by a photo-oxidation to form Se(VI). These two steps could also be greatly accelerated in presence of NO₃⁻ although the second step required an acidic condition. The photo cleavage rates varied from one organic compound to another and 10-fold differences were observed. Similarly to Se(IV), the further oxidation to Se(VI) could be prevented by Cl⁻ for all studied organoselenium compounds. Detailed reaction mechanisms involving OH radicals are proposed to explain Se photochemical behaviors in different matrices.     

Electrochemical behavior of dopamine at a 3,3′-dithiodipropionic acid self-assembled monolayers

Monolayers of 3,3′-dithiodipropionic acid (DTDPA) were prepared on a polycrystalline gold electrode through a self-assembly procedure to produce a gold 3,3′-dithiodipropionic acid self-assembled monolayer (AuDTDPA) modified electrode. The characterization of the AuDTDPA electrode was investigated by cyclic voltammetry and ac impedance using the [Fe(CN)₆]^3−/4− redox couple. The electrochemical behavior of DA on the modified electrode AuDTDPA was studied by cyclic and square-wave voltammetries, using phosphate buffer as supporting electrolyte. The oxidation peak current for DA increases linearly with concentration in the range of 0.35 × 10⁻⁵ to 3.4 × 10⁻⁵ mol L⁻¹. The performance of the AuDTDPA modified electrode was evaluated for the electroanalytical determination of dopamine (DA) in a pharmaceutical formulation. The AuDTDPA modified electrode showed a stable behavior and the presence of surface-COOH groups avoided the passivation of the electrode surface during the dopamine oxidation.     

Development of polyoxadiazole nanocomposites for high temperature polymer electrolyte membrane fuel cells

Novel nanocomposite membranes were prepared with sulfonated polyoxadiazole and different amounts of sulfonated dense and mesoporous (MCM-41) silica particles. It has been shown that particle size and functionality of sulfonated silica particles play an important role when they are used as fillers for the development of polymer electrolyte nanocomposite membrane for fuel cells. No significant particle agglomerates were observed in all nanocomposite membranes prepared with sulfonated dense silica particles, as analyzed by SEM, AFM, TGA, DMTA and tensile tests. The T_g values of the composite membranes increased with addition of sulfonated silica, indicating an interaction between the sulfonic acid groups of the silica and the polyoxadiazole. Constrained polymer chains in the vicinity of the inorganic particles were confirmed by the reduction of the relative peak height of tan δ. A proton conductivity of 0.034 S cm⁻¹ at 120 °C and 25% RH, which is around two-fold higher than the value of the pristine polymer membrane was obtained.