Synthesis and characterization of poly(styrene-co-methyl methacrylate)/layered double hydroxide nanocomposites via in situ polymerization

Intercalated poly(styrene-co-methyl methacrylate)/layered double hydroxide nanocomposites (PS-PMMA/LDH-B) have been synthesized by the in situ bulk multistep polymerization of styrene and methyl methacrylate in the presence of the Ca-Al layered double hydroxide, previously modified by the incorporation of benzoate anions [Ca₄Al₂(OH)₁₂(C₆H₅COO)₂·xH₂O, LDH-B]. Nanocomposites were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and transmission electron microscopy (TEM). XRD and TGA results pointed to the successful incorporation of the LDH-B within the copolymer matrix. XRD results indicated that the characteristic layered structure of the LDH-B had disappeared due to disordering. TEM analysis confirmed that LDH-B was partially dispersed within the matrix forming a structure with alternating matrix-particle regions, where particles appear in a form of intercalated nanocomposite structure. TGA results showed improved thermal properties in comparison to the neat PS-PMMA copolymer.     

Methyl methacrylate oligomerically-modified clay and its poly(methyl methacrylate) nanocomposites

A methyl methacrylate oligomerically-modified clay was used to prepare poly(methyl methacrylate) clay nanocomposites by melt blending and the effect of the clay loading level on the modified clay and corresponding nanocomposite was studied. These nanocomposites were characterized by X-ray diffraction, transmission electron microscopy, thermogravimetric analysis and cone calorimetry. The results show a mixed intercalated/delaminated morphology with good nanodispersion. The compatibility between the methylacrylate-subsituted clay and poly(methyl methacrylate) (PMMA) are greatly improved compared to other oligomerically-modified clays.     

Synthesis, characterization, flame retardance and thermal properties of halogen-free expandable graphite/PMMA composites prepared from sol-gel method

In this work, silane was grafted on expandable graphite via a free-radical reaction. The modified expandable graphite has an -OEt functional group which reacts with TEOS and PMMA that was modified via a sol-gel reaction using a coupling agent that contains silicon. Synergism between silicon flame retardant and expandable graphite increased the flame retardance of the materials. Expandable graphite was functionalized using a coupling agent to increase the interactive force between the organic and inorganic phases. It enhanced the thermal stability of the composites. SEM was adopted to observe the morphology of the composites, and the behavior associated with expansion after the materials had been burned is elucidated. LOI, TGA and IPDT were employed to calculate the flame retardance and thermal stability. The results indicate that the composites are halogen-free flame retardant organic/inorganic composites. Two methods for elucidating the kinetics of thermal degradation were utilized to measure the activation energy when the composites degraded in the high-temperature atmosphere.     

Preparation and properties of poly(vinyl alcohol)/silica nanocomposites derived from copolymerization of vinyl silica nanoparticles and vinyl acetate

Nanocomposites of poly(vinyl alcohol)/silica nanoparticles (PVA-SNs) were prepared by in-situ radical copolymerization of vinyl silica nanoparticles functionalized by vinyltriethoxysilane (VTEOS) and vinyl acetate with benzoyl peroxide (BPO, i.e., initiator), subsequently saponified via direct hydrolysis with NaOH solution. The resulting vinyl silica nanoparticles, PVA-SNs were characterized by means of fourier transformation spectroscopy (FTIR), transmission electron microscopy (TEM) and the elemental analysis method. Effects of silica nanoparticles on viscosity and alcoholysis of PVA-SNs were studied by a ubbelohode capillary viscometer and the back titration method. The morphological structure of PVA-SN films was investigated by scanning electron microscopy (SEM). Differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and tensile test were used to determine the thermal and mechanical properties of PVA-SN films. The results indicated that the content of vinyl groups on the surface of the vinyl silica nanoparticles was up to 3.02 mmol/g and vinyl silica nanoparticles had been successfully copolymerized with vinyl acetate. Furthermore, compared to pure PVA, silica nanoparticles bonded with polymer matrix in a low concentration affected the viscosity and alcoholysis of the PVA-SNs materials. At the same time, it resulted in the improvement of the thermal and mechanical properties of the PVA-SN materials due to a strong interaction between silica nanoparticles and the polymer matrix via a covalent bond. It could be found that the optical clarity of the membrane was changed through UV-Vis absorption spectrum due to the introduction of silica nanoparticles.     

A simple and green route to transparent boron nitride/PVA nanocomposites with significantly improved mechanical and thermal properties

A simple and green method is developed to prepare hexagonal boron nitride(h-BN)/poly(vinyl alcohol) (PVA) nanocomposites by using water as a common solvent of h-BN nanosheets and PVA.The obtained h-BN/PVA nanocomposites are highly transparent,and have significantly improved mechanical and thermal properties.They may outperform nano-clay and nano-alumina/PVA nanocomposites as flexible optoelectronic devices,optical windows and heat-releasing materials operated in oxidative or corrosive environment.     

Tentative links between thermal diffusivity and fire-retardant properties in poly(methyl methacrylate)-metal oxide nanocomposites

Possible relationships between fire-retardant properties and thermal diffusivity for poly(methyl methacrylate) (PMMA) filled by melt blending with titanium dioxide (TiO₂), alumina (Al₂O₃) and boehmite (AlOOH) were investigated for a better understanding of the mode of action of metal oxides as fire-retardants (FR) in PMMA. Fire-retardancy was measured with a cone calorimeter and thermal diffusivity (α) by Laser Flash Analysis (LFA). LFA measurements have shown that heat dispersion is higher with titanium dioxide and boehmite than with alumina despite a larger surface area. For thermal diffusivity, discrepancies between the different nanofillers were only visible from 10 wt% onwards. Thermal degradation of PMMA-oxide nanocomposites and their thermal diffusivity could be linked. Moreover, a bi-linear relationship between the peak of heat release rate (pHRR) and the average of heat release rate (AHRR) showed the occurrence of a barrier effect.     

Synthesis and characterization of NixMg1−xAl2O4 nano ceramic pigments via a combustion route

MgAl₂O₄ was successfully used as a crystalline host network for the synthesis of nickel-based nano cyan refractory ceramic pigments. Different compositions of Ni_xMg_1−xAl₂O₄ (0.1 ? x ? 0.8) powders have been prepared by using a low temperature combustion reaction (LTCR) of the corresponding metal nitrates with urea (U) as a fuel at 300 °C in an open air furnace. The as-synthesized samples were characterized by thermal analysis (TG-DTG/DTA), X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and transmission electron microscopy (TEM). UV-Vis and diffuse reflectance spectroscopy (DRS) using CIE- L^∗a^∗b^∗ parameters methods have been used for color measurements. The results show that the Ni_xMg_1−xAl₂O₄ samples are the crystalline phase with a particle size of 8.85-43.66 nm in the temperature range 500-1200 °C. The density, particle size, shape and color are determined for all the prepared samples with different calcination times and temperatures.     

Photo Polymerized Interpenetrating Polymer Network of Poly(antimony acrylate) and Poly(arsenic acrylate): Synthesis and Characterization

A series of IPN based on poly(antimony acrylate) and poly(arsenic acrylate) have been synthesized by a sequential mode of synthesis. Formation of complex based on “polymer solvent” method reflects the contraction of the polymer coils by determining the value of mutual interaction constant (k_AB) in different solvents such as dimethylsulphoxide (DMSO) (k_AB=0.60); dimethylformamide (DMF) (k_AB=0.42); dioxane (k_AB=0.26) predicting weak Vander Waal interaction. The scanning electron microscopy reveals dual phase morphology of both metal acrylates. The infrared spectrum indicates characteristic frequencies of (>C?O) at 1730 cm^?1,thus giving structural evidence for IPN. The properties namely percentage swelling, average molecular weight between crosslinks(M_c),Young's modulus, increases with concentrations of linear polymer(polyantimony acrylate) and initiator (benzoyl peroxide). However, it decreases with concentrations of monomer (arsenic acrylate) and crosslinker (divinyl benzene).The value of activation energy calculated from thermo gravimetric analysis is 15 KJ/mol.     

Functionalized-graphene/ethylene vinyl acetate co-polymer composites for improved mechanical and thermal properties

The surface functionalization of graphene and the preparation of functionalized graphene/ethylene vinyl acetate co-polymer (EVA) composites by solution mixing are described. Octadecyl amine (ODA) was selected as a surface modifier for the preparation of functionalized graphene (ODA-G) in an aqueous medium. The ODA-G was characterized by Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy, which confirm the modification and reduction of graphite oxide to graphene. Atomic force microscopy shows that the average thickness of ODA-G is ca. 1.9 nm. The ODA-G/EVA composites were characterized by X-ray diffraction and transmission electron microscopy, which confirms the formation of ODA-G/EVA composites. Measurement of tensile properties shows that the tensile strength of the composites (with 1 wt.% ODA-G loading) is ∼74% higher as compared to pure EVA. Dynamic mechanical analysis shows that the storage modulus of the composites is much higher than that of pure EVA. The thermal stability of the composite with 8 wt.% of ODA-G is ∼42 °C higher than that of pure EVA. The electrical resistivity has also decreased in the composites with 8 wt.% of ODA-G.     

Poly(vinyl alcohol)/GO-MMT nanocomposites: Preparation,structure and properties

A facile, efficient and environment friendly method is established to prepare poly(vinyl alcohol)(PVA) based graphene oxide-montmorillonite(GO-MMT) nanocomposites in aqueous media. GO-MMT nanohybrid is obtained by the combination of GO and MMT in water without any reducing or stabilizing agents. The formation of GO-MMT nanohybrid is due to the hydrogen bonding and crosslinking effects. The sodium ions within MMT sheets act as crosslinkers between GO sheets and MMT platelets. The resultant nanocomposites are characterized by means of X-ray diffraction(XRD), scanning electron microscopy(SEM), differential scanning calorimetry(DSC), thermogravimetric analysis(TGA) and mechanical testing. Compared to that of pure PVA, PVA nanocomposites show enhanced thermal stabilities and mechanical properties, which results from strong interfacial adhesion of the nanoadditives in PVA matrix. The further increase in the tensile strength and modulus results from strong interaction between PVA chains and layered GO-MMT as well as good mechanical properties of GO-MMT hybrid, compared to PVA/GO and PVA/MMT nanocompsoites.     

Poly(methyl methacrylate)/Methacryl-POSS Nanocomposites with Excellent Thermal Properties

Poly(methyl methacrylate) (PMMA) nanocomposites containing (methacryloxy)propyl polyhedral oligomeric silsesquioxane (methacryl‐POSS) were prepared by bulk‐polymerization process. The structures of the products were characterized by FTIR, solid‐state NMR, TEM, XRD, DSC, TGA, XPS and UV‐Vis spectra. The hybrid materials were found to be largely homogeneous. DSC and TGA results indicate that the thermal properties of PMMA nanocomposites are significantly improved. The glass transition temperature (T_g) and thermal decomposition temperature (T_dec) of the nanocomposites increased by 58 and 110°C, respectively. The bulk hybrid material maintains excellent optical transparency in visible region.     

Poly(methyl methacrylate) composites prepared by in situ polymerization using organophillic nano-to-submicrometer zinc oxide particles

Nano- and submicrometer zinc(II) oxide particles were synthesized by the polyol method and were used for the preparation of ZnO/poly(methyl methacrylate) (ZnO/PMMA) composite materials by the chain polymerization of methyl methacrylate (MMA) in bulk. ZnO particles with an organophilic surface layer were homogeneously dispersed in the PMMA matrix. Very low concentrations (0.1 wt.%) of nano zinc oxide absorbed over 98% of UV light as determined by UV-vis spectroscopy. Nano zinc oxide (75 nm) increased the initial decomposition temperature of the PMMA matrix by 30-40 °C at concentrations of 0.1% and above. This was explained by the changes in the termination mechanism of MMA polymerization resulting in a reduced concentration of vinylidene chain ends. Nano ZnO also increased the MMA polymerization reaction rate and reduced the activation energy. Submicrometer ZnO showed lower UV absorption, thermal stabilization and no influence on the reaction kinetics indicating that average particle size is of vital importance for the properties of PMMA nanocomposites and for MMA polymerization.     

Preparation and characterization of poly(propylene carbonate)/montmorillonite nanocomposites by solution intercalation

Poly(propylene carbonate) (PPC) is a new biodegradable aliphatic polycarbonate. However, the poor thermal stability and low glass transition temperatures (T_g) have limited its applications. To improve the thermal properties of PPC, organophilic montmorillonite (OMMT) was mixed with PPC by a solution intercalation method to produce nanocomposites. An intercalated-and-flocculated structure of PPC/OMMT nanocomposites was confirmed by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The thermal and mechanical properties of PPC/OMMT nanocomposites were investigated by thermal gravimetric analysis (TGA), differential scanning calorimetric (DSC), and electronic tensile tester. Due to the nanometer-sized dispersion of layered silicate in polymer matrix, PPC/OMMT nanocomposites exhibit improved thermal and mechanical properties than pure PPC. When the OMMT content is 4 wt%, the PPC/OMMT nanocomposite shows the best thermal and mechanical properties. These results indicate that nanocomposition is an efficient and convenient method to improve the properties of PPC.     

Synthesis,thermal, and rheological properties of poly(trimethylene terephthalate)/BaSO4 nanocomposites

A novel method was developed for fabricating poly(trimethylene terephthalate) (PTT)/BaSO₄ nanocomposites using in situ polymerization. A nano‐BaSO₄ suspension was prepared by reacting H₂SO₄ with Ba(OH)₂ in 1,3‐propanediol (PDO). The mean size of original nano‐BaSO₄ is 15–23 nm. PTT matrix was synthesized by condensation polymerization of bis(3‐hydroxypropyl terephthalate) after the completion of transesterification of dimethyl terephthalate (DMT) with PDO. It was found that the addition of BaSO₄ had little influence on the synthesis of PTT. The properties of nanocomposites with a wide range of BaSO₄ fraction were systematically studied. The morphologies of the composites were investigated by transmission electron microscopy (TEM), which showed that agglomerate structures did not form until BaSO₄ content higher than 8 wt%. The thermal properties of the nanocomposites were investigated by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The DSC results revealed that the triple endothermic melting phenomenon is only observed for the nanocomposites which contained 4 wt% BaSO₄, other samples exhibit double endothermic melting. These results indicated that nano‐BaSO₄ could induce a microcrystal to form more perfect morphology and restrain the formation of much thicker lamellar crystallinity, that is, nano‐BaSO₄ could induce the formation of more uniform crystallinity. Besides, the crystallization ability of the composites was greatly improved by loading nano‐BaSO₄. The TGA results suggested that nano‐BaSO₄ slightly increased the maximum‐decomposing‐rate temperature 1 (T_max1), but markedly increased the maximum‐decomposing‐rate temperature 2 (T_max2). Furthermore, the steady‐state shear behavior of samples was investigated by a parallel‐plate rheometer. The storage modulus (G') and loss modulus (G”) curves shifted to higher modulus upon addition of 2–16 wt% of nano‐BaSO₄. All of the samples investigated exhibited the expected shear‐thinning behavior. Proper contents of nano‐BaSO₄ would decrease the shear viscosity of nanocomposites, whereas superfluous amounts would greatly increase the viscosity of nanocomposites and the composites which loaded 8 wt% nano‐BaSO₄ revealed an equivalent shear viscosity compared to pure PTT. Copyright © 2008 John Wiley & Sons, Ltd.     

Grafting Efficiency of Hydroxy‐Terminated Poly(methyl methacrylate) with Multiwalled Carbon Nanotubes

Summary: Poly(methyl methacrylate)s (PMMAs) containing a terminal hydroxy group or multiple hydroxy groups as pendants were grafted to multiwalled carbon nanotubes (MWNTs) by esterification in toluene at 100 °C. The recovered polymer with a low level of MWNTs and the PMMA‐g‐MWNTs with up to 12 wt.‐% grafted polymer were characterized using spectroscopic, microscopic, and thermogravimetric analyses. The percentage of polymer present in the PMMA‐g‐MWNT samples is very low based upon the concentration of the acid groups in the tubes.

The grafting of hydroxy‐terminated PMMA to MWNTs by esterification.     

Exfoliated poly(methyl methacrylate) and polystyrene nanocomposites occur when the clay cation contains a vinyl monomer

The bulk polymerization of methyl methacrylate and styrene in the presence of an organically modified clay containing a vinyl group that can be involved in the polymerization produces exfoliated nanocomposites. These nanocomposites have been characterized by X‐ray diffraction, transmission electron microscopy, thermogravimetric analysis, mechanical properties, and cone calorimetry. The onset temperature of thermal degradation increases with the mechanical properties. The peak heat release rate is significantly reduced for nanocomposites containing 3 or 5% clay. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1124–1135, 2003     

Structural characterization and thermal decomposition of layered double hydroxide/poly(p-dioxanone) nanocomposites

Nanocomposites based on layered double hydroxides (LDH) and poly(p-dioxanone) (PPDO) were prepared by melt processing using dodecylbenzene sulfonate (DBS) and 4-hydroxybenzene sulfonate (HBS) as organic modifiers. The incorporation of organic anions in LDH was demonstrated by wide-angle X-ray scattering (WAXS) and Fourier transform infrared (FTIR). The dispersion degree of the organically modified LDHs in the PPDO matrix was analyzed by WAXS, indicating that only the LDH modified with HBS was exfoliated. The effect of the organically modified LDHs on the thermal stability of PPDO was studied using thermogravimetric analysis (TGA). The thermal stability of PPDO matrix was enhanced by the incorporation of the LDH modified with HBS due to the shielding effect of the exfoliated layers. In contrast, the LDH modified with DBS produced a decrease of the thermal stability of PPDO, probably due to hydrolytic decomposition of ester group. The thermogravimetric analysis also showed that the organo-modified LDH did not modify the thermal decomposition mechanism of the polymer, but had an effect on the thermal stability.     

Structures and thermal properties of chitosan-modified poly(methyl methacrylate)

The emulsion polymerization of methyl methacrylate in the presence of chitosan with potassium persulfate (KPS) as an initiator was examined in a previous article. The free radicals that dissociated from KPS not only initiated the polymerization but also degraded the chitosan molecules. Therefore, in addition to its role as a cationic surfactant, chitosan also participated in the polymerization reaction. When the polymerization was complete, the latex polymer consisted of poly(methyl methacrylate) (PMMA) homopolymer and chitosan–PMMA copolymer. In this article, the structures and thermal properties of latex polymers are examined. Gel permeation chromatography was used to measure the molecular weight of the PMMA homopolymer, with the copolymer composition determined by an elemental analyzer. Scanning and transmission electronic microscopes were used to measure the size of latex particles from different reaction systems. The surface charges of latex particles at several different pH values were determined by the measurement of the ζ potential. All results agreed with the reaction mechanism proposed in the previous article. Finally, the presence of rigid chitosan increased the glass-transition temperature of the final latex polymers. Thermogravimetric analysis showed that the degradation behavior of latex polymers was similar to the unzipping mechanism of PMMA, yet the presence of chitosan units hindered the unzipping of the main chains in chitosan–PMMA copolymers. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1646–1655, 2001     

Poly(methyl methacrylate)-induced Microstructure and Hydrolysis Behavior Changes of Poly(L-lactic acid)/Carbon Nanotubes Composites

Poly(L-lactic acid)(PLLA)-based composites exhibit wide applications in many fields.However,most of hydrophilic fillers usually accelerate the hydrolytic degradation of PLLA,which is unfavorable for the prolonging of the service life of the articles.In this work,a small quantity of poly(methyl methacrylate)(PMMA)(2 wt%-10 wt%)was incorporated into the PLLA/carbon nanotubes(CNTs)composites.The effects of PMMA content on the dispersion of CNTs as well as the microstructure and hydrolytic degradation behaviors of the composites were systematically investigated.The results showed that PMMA promoted the dispersion of CNTs in the composites.Amorphous PLLA was obtained in all the composites.Largely enhanced hydrolytic degradation resistance was achieved by incorporating PMMA,especially at relatively high PMMA content.Incorporating 10 wt%PMMA led to a dramatic decrease in the hydrolytic degradation rate from 0.19%/h of the PLLA/CNT composite sample to 0.059%/h of the PLLA/PMMA-10/CNT composite sample.The microstructure evolution of the composites was also detected,and the results showed that no crystallization occurred in the PLLA matrix.Further results based on the interfacial tension calculation showed that the enhanced hydrolytic degradation resistance of the PLLA matrix was mainly attributed to the relatively strong interfacial affinity between PMMA and CNTs,which prevented the occurrence of hydrolytic degradation at the interface between PLLA and CNTs.This work provides an alternative method for tailoring the hydrolytic degradation ability of the PLLA-based composites.     

Effect of ZnO and organo-modified montmorillonite on thermal degradation of poly(methyl methacrylate) nanocomposites

Since a few years ago, a topic of interest consists in developing composites filled with nanofillers to improve thermal degradation and flammability property of poly(methyl methacrylate) (PMMA). In the present work, the effects of ZnO nanoparticles and organo-modified montmorillonite (OMMT) on the thermal degradation of PMMA were investigated by thermogravimetric analysis (TGA). PMMA-ZnO and PMMA-OMMT nanocomposites were prepared by melt blending with different (2, 5, and 10 wt%) loadings. SEM and TEM analyses of nanocomposites were performed in order to investigate the dispersion of nanofillers in the matrix. According to TGA results, the addition of ZnO nanoparticles does not affect the thermal degradation of PMMA under an inert atmosphere. However, in an oxidative atmosphere, two contrary effects were observed, a catalytic effect at lower concentration of ZnO in the PMMA matrix and a stabilizing effect when the ZnO concentration is higher (10 wt%). In contrast, the presence of OMMT stabilizes the thermal degradation of PMMA whatever be the atmosphere. Differential thermal analysis (DTA) curves showed surprising results, because a dramatic change of exothermic reaction of the PMMA degradation process to an endothermic reaction was observed only in the case of OMMT. During the degradation of PMMA-ZnO nanocomposites, pyrolysis-gas chromatography coupled to mass spectrometer (Py-GC/MS) showed an increase in the formation of methanol and methacrylic acid while a decrease in the formation of propanoic acid methyl ester occurred. In the case of PMMA-OMMT systems, a very significant reduction in the quantity of all these degradation products of PMMA was observed with increasing OMMT concentration. It is also noted that during PMMA-OMMT degradation less energy was released as the decomposition is an endothermic reaction and the material was cooled.