Cu(OAc)2-catalyzed direct radical C2 arylation of quinoline N-oxide with arylamines

A Cu(OAc)₂-catalyzed synthesis of 2-arylquinoline N-oxides with easily available arylamines is described. The main features of this reaction are mild reaction conditions, high functional-group tolerance, excellent regioselectivity, and good to excellent yields. This procedure is mild, operationally simple, and constitutes a greener approach to the arylation of quinoline N-oxides.     

Pd(OAc)2-catalyzed fluoride-free cross-coupling reactions of arylsiloxanes with aryl bromides in aqueous medium

Mild conditions have been developed to achieve the Pd(OAc)2-catalyzed fluoride-free cross-coupling between the aryl bromides and arylsiloxanes in good to high yields in aqueous medium. The success of the reactions requires the presence of poly(ethylene glycol) (PEG) and 3 equiv of sodium hydroxide. The product was easily separated with ethyl ether extraction, and the catalytic system can be reused eight times with high efficiency.     

Pd(OAc)2-catalyzed carbonylation of amines

A phosphine-free catalytic system [Pd(OAc)2-Cu(OAc)2-air] induced a substrate-specific carbonylation of amines in boiling toluene under CO gas (1 atm). Symmetrical N,N'-dialkylureas were obtained by the carbonylation of primary amines. N,N,N'-Trialkylureas were selectively formed by addition of a secondary amine to the above reaction vessel. Secondary amines did not give tetraalkylureas. However, dialkylamines with a phenyl group on their alkyl chains, such as N-monoalkylated benzylic amine or phenethylamine derivatives, underwent a direct aromatic carbonylation to afford five- or six-membered benzolactams. In the carbonylation, the chelation effect or steric repulsion between Pd(II) and the meta-substituent in the ortho-palladation and the ring sizes of cyclopalladation products that were formed prior to carbonylation were found to generate good site selectivity and increase the reaction rate. In contrast, carbonylation of omega-arylalkylamines with a hydroxyl group gave neither ureas nor benzolactams but instead produced 1,3-oxazolidinones smoothly. Hydrochlorides of amines also underwent carbonylation to afford the corresponding amides under the conditions used. This procedure made it possible to prepare ureas of amino acid esters and N-alkylcarbamates in practical yields.     

Cu(II)-catalyzed decarboxylation/elimination of N-arylsulfonyl amino acids to primary aryl sulfonamides

A novel protocol for CuO-catalyzed decarboxylation/elimination of N-arylsulfonyl amino acids was developed. It is the first example of using an accessible amino acid as an ammonia synthetic equivalent for the synthesis of primary aryl sulfonamides via oxidative decarboxylation/elimination reactions. The present protocol shows excellent functional group tolerance and provides an efficient method for the synthesis of primary aryl sulfonamides in excellent yields.     

Copper-mediated O-arylation of lactols with aryl boronic acids

A novel and efficient method to access phenolic glycosides has been established by using copper-mediated coupling reaction of aryl boronic acids with hemiacetals. The reaction enjoyed a wide range of substrate scope, and many phenolic glycosides can be synthesized in good yields.     

Cross-coupling reactions of aryl pivalates with boronic acids

The first cross-coupling of acylated phenol derivatives has been achieved. In the presence of an air-stable Ni(II) complex, readily accessible aryl pivalates participate in the Suzuki-Miyaura coupling with arylboronic acids. The process is tolerant of considerable variation in each of the cross-coupling components. In addition, a one-pot acylation/cross-coupling sequence has been developed. The potential to utilize an aryl pivalate as a directing group has also been demonstrated, along with the ability to sequentially cross-couple an aryl bromide followed by an aryl pivalate, using palladium and nickel catalysis, respectively.     

丙酮为溶剂Pd(OAc)2催化的Heck反应研究

研究了无需外加配体、在丙酮溶剂中Pd(OAc)2催化的Heck反应.得到的反应最优结果是:Pd( OAc)2(1 mol%)为催化剂,K2CO3(1.2 equiv.)为添加剂,以廉价易得的丙酮为溶剂,在100℃下各种碘代芳烃(1equiv.)可以顺利地与丙烯酸乙酯、苯乙烯和乙烯环已烷等烯基化合物(2 equiv.)发...     

Pd(OAc)2/P(cC6H11)3-catalyzed allylation of aryl halides with homoallyl alcohols via retro-allylation

Allylations of aryl halides take place upon treatment of tertiary homoallyl alcohols with aryl halides in the presence of cesium carbonate and a palladium catalyst. The allylation reaction would consist of the following steps: (1) oxidative addition of aryl halide to palladium, (2) ligand exchange between the halide and the homoallyl alcohol affording aryl(homoallyloxy)palladium, (3) retro-allylation of the palladium alkoxide to generate sigma-allyl(aryl)palladium with concomitant liberation of the relevant ketone, and (4) productive reductive elimination. Since the retro-allylation step proceeds in a concerted fashion via a conformationally regulated six-membered cyclic transition state, the allylation reactions are highly regio- and stereospecific when homoallyl alcohols having a substituted allyl group are used. Whereas triarylphosphine is known to serve as a ligand for the palladium-catalyzed allyl transfer reactions, tricyclohexylphosphine proves to significantly expand the scopes of aryl halides to electron-rich aryl chlorides and of homoallyl alcohols to cyclic homoallyl alcohols. The new arylative ring-opening reactions of cyclic homoallyl alcohols allow for the synthesis of ketones having a branched or linear allylarene moiety at the remote terminus in regio- and stereospecific manners.     

Metal-free synthesis of aryl esters by coupling aryl carboxylic acids and aryl boronic acids

A facile synthesis of aryl esters is developed by coupling aryl carboxylic acids and aryl boronic acids in the presence of PhI(OAc)₂ and carbonyl diimidazole. A wide range of functional groups were tolerant to the metal-free reaction condition that led to the desired products in good yields.     

Cu(I)-mediated reductive amination of boronic acids with nitroso aromatics

[reaction: see text] A mild method for the reductive amination of aryl boronic acids with nitroso aromatic compounds is reported. This C-N bond formation is mediated by a stoichiometric amount of CuCl as both a catalyst and a reducing agent. Alternatively, 10% Cu(I)-3-methylsalicylate (CuMeSal) catalyzes the same reaction in the presence of either ascorbic acid or hydroquinone as the terminal reducing agent. Diarylamines bearing a variety of functional groups can be obtained in good yields.     

Indium/Cu(II)-mediated one-pot synthesis of unsymmetrical diaryl amines from aryl boronic acids and azides

Aryl azides react smoothly with aryl boronic acids in the presence of indium metal in methanol to furnish a variety of unsymmetrical diaryl amines in good yields. This is the first report on the synthesis of diaryl amines from the cross coupling of aryl azides with aryl boronic acids via N-arylation.     

Oxidative cross-coupling of allyl(trimethyl)silanes with aryl boronic acids by palladium catalysis

The first oxidative cross-coupling of allylsilanes with aryl boronic acids has been developed by palladium catalysis. The reaction between β-substituted allyl(trimethyl)silanes and a wide range of aryl boronic acids afforded allylarenes in moderate to good yields and excellent selectivity. On the basis of experimental results and literature reports, it was suggested that the reaction might start from transmetalation of aryl boronic acid with AgOAc followed by transmetalation with Pd(II) to give an arylpalladium acetate complex as a key intermediate. This intermediate underwent either electrophilic addition/desilylation or transmetalation with allylsilane and subsequent reductive elimination to give the final product.     

Rh2(OAc)4-catalyzed reaction of 1,3-dioxanes with methyl diazoacetate

The reactions of methyl diazoacetate with 1,3-dioxanes in the presence of Rh₂(OAc)₄ afford 1,4-dioxepanes in up to 46% yields. The insertion of methoxycarbonylcarbene into the C—O bond occurs only in the case of 2-phenyl-1,3-dioxanes.     

Simple amine/Pd(OAc)(2)-catalyzed suzuki coupling reactions of aryl bromides under mild aerobic conditions

A new palladium catalyst (DAPCy) made from Pd(OAc)(2) and commercially available, inexpensive dicyclohexylamine has been developed for the Suzuki coupling reaction of aryl bromides with boronic acids to give the coupling products in good to high yields. The air-stable catalyst was characterized and well-defined by X-ray crystallography. A catalytic system involving DAPCy in dioxane demonstrates a temperature-dependent reactivity toward aryl bromides with different electronic substituents, and selectively couples electron-deficient aryl bromides with boronic acids over electron-rich ones at room temperature. Another catalytic system employing DAPCy in EtOH provides a general and convenient method to prepare biaryls from aryl bromides and boronic acids with a broad range of functional groups at room temperature and under aerobic conditions.     

Cu(II)-catalyzed functionalizations of aryl C-H bonds using O2 as an oxidant

Cu(II)-catalyzed acetoxylation and halogenation of aryl C-H bonds are developed. ortho-Selectivity was observed with a wide range of 2-arylpyridine substrates. Both mono- and difunctionalizations are achieved by tuning the reaction conditions. Excellent functional group tolerance and use of O2 as a stoichiometric oxidant are significant advantages over our recently developed Pd-catalyzed C-H functionalization reactions. These newly discovered reaction conditions are also applicable for cyanation, amination, etherification, and thioetherification of aryl C-H bonds. Mechanistic investigations are carried out to gain insights into the Cu(II)-catalyzed C-H functionalization reactions.     

Copper (II)-mediated arylation with aryl boronic acids for the N-derivatization of pyrazole libraries

A N-derivatized 3-dimethylaminopropyloxypyrazole library was prepared using solution-phase parallel synthesis. The library was designed using physicochemical constraints designed to remove non-membrane-permeable molecules. Cupric acetate-mediated N-arylation with aryl boronic acids proceeded regioselectively to form the N-2-substituted derivatives. The presence of the 3-dimethylaminopropyloxy group was found to completely control the regioselectivity of the arylation. Presence of a dimethylaminoethyloxy or dimethylaminobutyloxy group gave a lesser degree of regioselectivity. The scope of the method as applied to library synthesis is discussed.     

Palladium-catalyzed carbonylative coupling of pyridine halides with aryl boronic acids

The carbonylative Suzuki cross-coupling of a variety of mono-iodopyridines and bromopyridines (1a,b, 3a-c, 5) catalyzed by palladium-phosphane systems has been studied to prepare benzoylpyridine derivatives (2, 4, 6). The selectivity and the rate of the reaction are highly dependent on the reaction conditions, i.e. nature of the palladium catalyst precursor, solvent, temperature and CO pressure. The main side-products arise from direct, non-carbonylative cross-coupling. Under optimized conditions, benzoylpyridines are recovered in high yields (80-95%). The order of reactivity decreases from iodo- to bromopyridines and from 2-, 4- to 3-substituted halopyridines. The reactivity of dihalopyridines has been investigated; 2,6-dibromopyridine (7) and 3,5-dibromopyridine (11) are selectively transformed into either the corresponding benzoyl-phenylpyridine (8, 12) or the corresponding dibenzoylpyridine (9, 13). Dissymmetric 2,5-dihalopyridines (15a,b) are transformed into 2-benzoyl-5-bromopyridine (16) or 2,5-dibenzoylpyridine (17) in high yields.     

Palladium(O)-catalyzed carbonylation of alkenyl- and aryl- borates and boronic acids with carbon monoxide

Alkenyl- and aryl-borates and boronic acids react with Co under atmospheric pressure in methanol at 25°C in the presence of a catalytic amount of Pd(PPh₃)₄ to give the corresponding methyl carboxylates and ketones in moderate yields.