Resonance Raman spectroscopic study on chiral aggregation of bilirubin-bovine serum albumin complex formed at liquid/liquid interface.

Resonance Raman spectroscopy assisted by centrifugal liquid membrane/circular dichroism (CLM-CD) and UV/Vis absorption spectroscopies was applied to measure the binding state of bilirubin (BR) in the complex with bovine serum albumin (BSA) formed at a heptane/water interface. The bisignate Cotton effects in the interfacial CD spectra and the red shift and linewidth increase of the BR absorption band around 450 nm indicated the formation of the BR-BSA complex at the interface and the chiral conversion of BR molecules in the aggregates. The resonance Raman spectra of BR observed at the interface suggested that the interfacial BR-BSA complex formed during the initial 15 min after the contact of the two phases had a similar structure with that in solution, but after 15 min were forming aggregates coexisting with solid micro-particles. These experimental results strongly suggested that the chiral interconversion of BR from (P+) conformation to (M-) conformation in the interfacial complex was accompanied by aggregation of the BR-BSA complexes. In the present study, resonance Raman microscopic spectrometry was proved to be highly useful for characterizing the solid like aggregate formed at the liquid/liquid interface.     

Chiral complexation and aggregation of bilirubin with serum albumin at a liquid/liquid interface

The chiral complexation of bilirubin (BR) with bovine and human serum albumin (BSA and HSA), and the aggregation of the complexes at the heptane+chloroform(5:1)/water interface were studied via UV/Vis absorption and circular dichroism (CD) measurements in combination with the centrifugal liquid membrane (CLM) method. The interfacial adsorptivities of BR, BSA and their complexes were also studied by performing interfacial tension measurements at the interface. The changes in the absorbances and the induced CD amplitudes of the interfacial BR-BSA complex provided insights into the mechanism of the conformational enantioselective complexation at the interface, and indicated that the chiral conversion induced by the complexation with BSA was from the P(+) form to the M(-) form of BR. The broadening of the 450 nm band and the appearance of a new shoulder at 474 nm further supported the formation of aggregates of the complexes at the interface. The dependence of the CD amplitude on the molar ratio of BSA to BR revealed that the composition of the complex was 1:1 BSA:BR. The probable interfacial reaction scheme was proposed, and the affinity constant of BR-BSA at the interface was found to be 4.67 x 10(8) M(-2). The interfacial complexation and aggregation of BR and HSA were weaker than those of the BR-BSA complex due to the different BR binding positions adopted for BSA and HSA and the binding effect of chloroform.     

Bovine serum albumin unfolding at the air/water interface as studied by dilational surface rheology

Measurements of the surface dilational elasticity close to equilibrium did not indicate significant distinctions in the surface conformation of different forms of bovine serum albumin (BSA) in a broad pH range. At the same time, the protein denaturation in the surface layer under the influence of guanidine hydrochloride led to strong changes in the kinetic dependencies of the dynamic surface elasticity if the denaturant concentration exceeded a critical value. It was shown that the BSA unfolding at the solution surface occurred at lower denaturant concentrations than in the bulk phase. In the former case, the unfolding resulted in the formation of loops and tails at surface pressures above 12 mN/m. The maximal values of the dynamic surface elasticity almost coincided with the corresponding data for the recently investigated solutions of β-lactoglobulin, thereby indicating a similar unfolding mechanism.     

Adsorption of bovine serum albumin at the air/water interface and its effect on the formation of DPPC surface film

The adsorption of bovine serum albumin (BSA) at the air/water interface and its effect on the transport of dipalmitoylphosphatidylcholine (DPPC) to form a surface film were studied with tensiometry, infrared reflection absorption spectroscopy (IRRAS), and ellipsometry. For 1, 10, 100, and 1000 ppm BSA solutions, the steady-state tension ranges from 55 to 50 mN m⁻¹. At pulsating area (at 20 cycles min⁻¹), both the minimum and maximum tensions decrease with increasing bulk concentration. Even though the steady-state tension is similar for 100 and 1000 ppm BSA, IRRAS and ellipsometry results indicate that the adsorbed density is higher for 1000 ppm BSA. For 1000 ppm/1000 ppm BSA/DPPC mixture, the tension behavior was found to be similar to that of 1000 ppm BSA when alone. Results from IRRAS and ellipsometry also demonstrate that BSA is the dominant adsorbed component at the air/water interface. Thus, at 1000 ppm, by adsorbing fast and possibly irreversibly, BSA interferes with the transport and adsorption of DPPC and inhibits its ability to lower the surface tension. However, when DPPC is introduced via a spread monolayer mechanism, DPPC expels partly or completely the adsorbed BSA monolayer and then controls the tension behavior with little or no inhibition by BSA. Thus, the competitive adsorption of DPPC and BSA depends strongly on the path or mechanism of introducing DPPC to the surface and involves path-dependent nonequilibrium adsorption phenomena.     

Molecular aggregation in the ternary system deca glycerol dioleate/heptane/water

The phase diagram for the ternary system deca glycerol dioleate(DGD)/heptane/water was established at 25 °C. In this phase diagram it was seen that the reverse micellar solution phase extends in its area until the water content reaches 35–45 wt%, at which a liquid crystalline phase begins to appear. On the basis of the experimental results of specific conductivity, viscosity, etc. for the samples containing a definite amount of DGD (0,1 M), and varying relative amounts of heptane and water, the mechanism of the transition of reverse micellar structures to liquid crystalline phase is discussed.     

Dynamical and morphological studies on the adsorption and penetration of human serum albumin into phospholipid monolayers at the air/water interface

The dynamic adsorption and penetration of human serum albumin (HSA) into the monolayers of five biologically important surfactants—DSPC, DPPC, DMPC, DMPE and DMPA—were systematically studied using Brewster angle microscopy, film balance and pendent drop techniques. Isotherms after different adsorption times show that the presence of HSA changed the monolayer phase behavior (e.g. the shifts of the LE→LC phase transition in the mixed phospholipid/HSA monolayers). Apparent inhomogeneous phases—‘honey-comb’ (J. Mol. Liq., 2001, 90, 149), ‘block’ or ‘stripe’ shape phases are formed due to the adsorption and penetration of HSA into these phospholipid monolayers at the air/water interface. Both the phase behavior changes and the morphological changes were confirmed by our recent structure studies in DPPA/HSA and DPPS/HSA monolayers using X-ray diffraction at grazing incidence, which directly shows that HSA penetration can change the tilt angle of phospholipids. It was found that the adsorption and penetration of HSA strongly depends on the phospholipid head-group structure and the physical state of the phospholipid films. The latter played a dominant role by providing enough space for the penetration of HSA and affecting the hydrophobic interactions of HSA with the aliphatic chains of phospholipids in monolayers at the air/water interface. In general, HSA penetrates more efficiently and quickly into monolayers of phospholipids in liquid state (e.g. DMPC compared to DSPC) and with unprotected charges (e.g. PA compared to PE and PC).     

Effect of water on physical transitions of human serum albumin

Differential thermal analysis is performed for native human serum albumin, denatured human serum albumin, and their mixtures with water in the range 80–550 K. The temperatures of phase transitions of the protein are determined, and the effect of water on these transitions is ascertained. The limit of water solubility in the native protein is estimated from the calorimetry data on the enthalpy of melting of the excess-water phase. The phase diagram of the albumin-water system is plotted and analyzed in wide temperature and concentration ranges.     

Adsorption and interaction of fibronectin and human serum albumin at the liquid-liquid interface

The goal of this work was to investigate the dynamics of human plasma fibronectin (HFN) at the oil-water interface and to characterize its interactions with human serum albumin (HSA) by total internal reflection fluorescence microscopy (TIRFM). Among key results, we observed that fibronectin adsorption at the oil-water interface is rapid and essentially irreversible, even over short time scales. This may be due to the highly flexible nature of the protein, which allows its various domains to quickly attain energetically favorable conformations. On the other hand, HSA adsorption at the oil-water interface is relatively reversible at short times, and the protein is readily displaced by fibronectin even after HSA has been adsorbed at the interface for as long as 2 h. At longer adsorption times, HSA is able to more effectively resist complete displacement by fibronectin, although we observed significant fibronectin adsorption even under those conditions. Displacement of adsorbed fibronectin by HSA was negligible under all conditions. Fibronectin also adsorbs preferentially from a mixture of HFN and HSA, even when the concentration of HSA is substantially higher. This study is relevant to such emerging research thrusts as the development of biomimetic interfaces for a variety of applications, where there is a clear need for better understanding of the effects of interfacial competition, adsorption time scales, and extent of adsorption irreversibility on interfacial dynamics.     

The effect of glucose on bovine serum albumin denatured aggregation kinetics at high concentration

The effect of glucose (0–15 mass%) on the kinetics of bovine serum albumin (BSA) denatured aggregation at high concentration in aqueous solution has been studied by differential scanning calorimetry. The observed denatured aggregation process was irreversible and could be characterized by a denaturation temperature (T _m), apparent activation energy (E _a), the approximate order of reaction, and pre-exponential factor (A). As the glucose concentration increased from 0 to 15 mass%, T _m increased, E _a also increased from 514.59409±6.61489 to 548.48611±7.81302 kJ mol⁻¹, and A/s⁻¹ increased from 1.24239E79 to 5.59975E83. The stabilization increased with an increasing concentration of glucose, which was attributed to its ability to alter protein denatured aggregation kinetics. The kinetic analysis was carried out using a composite procedure involving the iso-conversional method and the master plots method. The iso-conversional method indicated that denatured aggregation of BSA in the presence and absence of glucose should conform to single reaction model. The master plots method suggested that the simple order reaction model best describe the process. This study shows the combination of iso-conversional method and the master plots method can be used to quantitatively model the denatured aggregation mechanism of the BSA in the presence and absence of glucose.     

Theoretical calculations of extraction selectivity: Alkali cation complexes of calix[4]-bis-crown6 in pure water,chloroform, and at a water/chloroform interface

We report theoretical calculations of ion extraction selectivity by ionophores, based on molecular dynamics simulations coupled with the free energy perturbation technique. This method is applied to the Calix[4]-bis-crown6 ( L ) ionophore, which displays remarkable selectivity for Cs⁺ over Na⁺ extraction from an aqueous to a chloroform phase. Using a thermodynamic cycle, we model the cation extraction selectivity of L from water to chloroform and calculate a peak for Cs⁺, in agreement with the experiment. This high Cs⁺ ionophoricity is accounted for mostly by differential solvation effects, with standard 1–6–12 pairwise potentials without need of “special π interactions” with the ionophore. The effect of a picrate (Pic⁻) counterion on structures and selectivities is investigated. Finally, we report simulations on the L ionophore free and on the LCs⁺ and LCs⁺Pic⁻ complexes at the water/chloroform interface. We find that all these species are “adsorbed” at the interface like surfactants instead of diffusing spontaneously to the organic phase. © 1996 by John Wiley & Sons, Inc.     

Expulsion of bovine serum albumin from the air/water interface by a sparingly soluble lecithin lipid

Dynamic surface tensiometry, ellipsometry, and infrared reflection-absorption spectroscopy (IRRAS) were used to study the dynamic adsorption and surface tensions of dilauroylphosphatidylcholine (DLPC) in the presence of bovine serum albumin (BSA). Results show that the equilibrium adsorbed layers consist mostly of DLPC, which can produce dynamic surface tensions (1 mN/m) as low as the more successful lung surfactant replacement formulations. When the aqueous surface expands and contracts sinusoidally, BSA can coadsorb and lead to slightly higher dynamic surface tensions than when DLPC is alone. Similar results were obtained with BSA and sodium myristate [McClellan and Franses, Colloids Surf. B 30 (2003) 1]. Expulsion of the BSA in the layer by DLPC can take from 5 to 15 min, depending on relative concentrations and history of solute addition. This is shown by tensiometry measurements on mixtures, and also by injecting aqueous DLPC underneath adsorbed BSA layers and probing the surface layer with ellipsometry and IRRAS. Albumin layers from buffer solutions aged up to 30 h can be expelled by DLPC. In pure water, there is an initial enhancement in protein adsorption after the DLPC is injected. This can be explained by the hypothesis that DLPC molecules bind with BSA molecules to form a hydrophobic lipoprotein complex, which is more hydrophobic than the protein itself. Since DLPC produces lower surface energy than BSA and--being slightly soluble--adsorbs to the surface by a molecular mechanism, it fulfills the thermodynamic and dynamic requirements for expelling the BSA from the surface. The results have implications for minimizing lung surfactant inhibition by serum proteins, as it occurs in the cases of adult or acute respiratory distress syndrome.     

Adsorption behavior of lauric acid at heptane/water interface as studied by second harmonic generation spectroscopy and interfacial tensiometry.

Interfacial tensiometry and second harmonic generation (SHG) spectroscopy were applied to examine the adsorption behavior of lauric acid (LA) at a heptane/water interface. From interfacial tensiometry measurements, the adsorption kinetics of LA was revealed to be diffusion-controlled, and the adsorption constant of LA was estimated to be 9.6 x 10(4) M(-1). The adsorption isotherms obtained by SHG measurements were analyzed by taking account of both the molecular orientation of LA at the interface and a surface electric field generated by the adsorbed LA layer. It was confirmed that the carboxylic groups of adsorbed LA molecules were well ordered at the heptane/water interface and the orientation of the carboxylate group was invariant during the adsorption process.     

Systematic investigations on the biophysical complexation of hydroxyethyl starch 200/0.5 with human serum albumin

Journal of Inclusion Phenomena and Macrocyclic Chemistry - Spectroscopic techniques have been used to improve the understanding of the interactions between hydroxyethyl starch (HES) 200/0.5 and...     

Spontaneous fractal aggregation of gold nanoparticles and controlled generation of aggregate-based fractal networks at air/water interface

The spontaneous fractal aggregation of as-prepared cetytrimethylammonium bromide (CTAB)-capped gold nanoparticles was found to happen at the air/water interface after spreading their chloroform solution on water surfaces. Aided by Langmuir-Blodgett techniques, these fractal aggregates can be interconnected with each other to form aggregate-based fractal networks.     

Effect of inorganic salts on the aggregation behavior of branched block polyether at air/water and n-heptane/water interfaces

The effect of inorganic salts (CaCl₂, MgCl₂, NaCl, NaI and NaSCN) on the aggregation behavior of a synthesized polyether with seven poly (ethylene oxide)-b-poly (propylene oxide)-b-poly (ethylene oxide) (PEO-PPO-PEO) arms attached to a tetraethylenepentamine core (simplified AE73) at air/water and n-heptane/water interfaces has been investigated by interfacial tension and oscillating bubble methods. The additions of NaCl, CaCl₂, and MgCl₂ may facilitate the micellization of AE73 and increase its maximum interfacial excess concentration (Γ_max) due to the “salting out” effect, while NaSCN induces opposite effect and NaI exerts little influence. The adsorption kinetics of AE73 is controlled not only by the diffusion between the bulk solution and the interfacial layer but also by the energetic and steric barriers generated by the already adsorbed molecules. The adsorption relaxation time of AE73 is reduced with the addition of salts and this phenomenon is more prominent at the n-heptane/water interface. The “salting in” ions decrease the dilational modulus of AE73 while the “salting out” ions induce an opposite effect. The mechanisms of the interaction between inorganic ions and the polyether were discussed; the difference in aggregation behavior between linear and branched block polyethers were also compared.     

Lateral intermolecular forces between biomembrane lipids in two dimensions: 1,2-dipalmitin at the heptane/water interface compared with phospholipids

The lateral interaction forces between phospholipids in two-dimensional arrays are fundamental to understanding membrane biophysics. In previous studies the related thermodynamic functions have been measured for spread phospholipid monolayers at the oil/water interface over a range of temperatures and densities, and the two-dimensional virial coefficients obtained. These coefficients have been computed from a model that emphasizes the head group zwitterion interactions. In this study we examine the contribution of the diglyceride portion of phospholipid molecules to the lateral intermolecular forces. Measurements of the heptane/water interfacial tension as a function of the concentration of 1,2-dipalmitoyl glycerol (DP) in the heptane were made over a range of low surface pressures at 25 degrees C. Infrared measurements on the DP solutions show that the solutions are ideal. The results are interpreted to give two-dimensional virial coefficients for the adsorbed monolayer. The second virial coefficient B2(T) for DP is +0.31 nm2/molecule, in marked contrast to the much larger positive values found for the corresponding phospholipids at the same interface and temperature, and clearly indicating an attractive component to the lateral potentials of mean force between pairs of DP molecules. The contribution of the diglyceride moiety to the pair potentials of the phospholipids thus appears to be minor but not negligible. The differences in the second virial coefficients for DP and the phospholipids are interpreted primarily in terms of the orientation of the ester carbonyl dipoles, also drawing on spectroscopic and diffraction evidence from related structures.     

Ions at the air/water interface

In a recent review of this topic [B.C. Garett, Science 303 (2004) 1146] the emphasis was on some recent experiments, in which it was found that some anions accumulate at the air/water interface and not in the bulk, as usually happens to the cations, and on some simulations which explained those positive surface adsorption excesses. Because a large number of these experiments could be explained on the basis of some simple physical models proposed by the authors for the interaction between the ions and the air/water interface [M. Manciu, E. Ruckenstein, Adv. Colloid Interface Sci. 105 (2003) 63; Adv. Colloid Interface Sci. 112 (2004) 109; Langmuir 21 (2005) 11312], those models are reviewed in the present note, the goal being to draw attention to them.