Marine derived compounds as binders of the White spot syndrome virus VP28 envelope protein: In silico insights from molecular dynamics and binding free energy calculations

White spot syndrome virus (WSSV) remains as one of the most dreadful pathogen of the shrimp aquaculture industry owing to its high virulence. The cumulative mortality reaches up to 100% within in 2–10 days in a shrimp farm. Currently, no chemotherapeutics are available to control WSSV. The viral envelope protein, VP28, located on the surface of the virus particle acts as a vital virulence factor in the initial phases of inherent WSSV infection in shrimp. Hence, inhibition of envelope protein VP28 could be a novel way to deal with infection by inhibiting its interaction in the endocytic pathway. In this direction, a timely attempt was made to recognize a potential drug candidate of marine origin against WSSV using VP28 as a target by employing in silico docking and molecular dynamic simulations. A virtual library of 388 marine bioactive compounds was extracted from reports published in Marine Drugs. The top ranking compounds from docking studies were chosen from the flexible docking based on the binding affinities (ΔGb). In addition, the MD simulation and binding free energy analysis were implemented to validate and capture intermolecular interactions. The results suggested that the two compounds obtained a negative binding free energy with −40.453 kJ/mol and −31.031 kJ/mol for compounds with IDs 30797199 and 144162 respectively. The RMSD curve indicated that 30797199 moves into the hydrophobic core, while the position of 144162 atoms changes abruptly during simulation and is mostly stabilized by water bridges. The shift in RMSD values of VP28 corresponding to ligand RMSD gives an insight into the ligand induced conformational changes in the protein. This study is first of its kind to elucidate the explicit binding of chemical inhibitor to WSSV major structural protein VP28.     

Short Hairpin RNA-Induced Myostatin Gene Silencing in Caprine Myoblast Cells In Vitro

Myostatin (MSTN) belongs to the transforming growth factor (TGF)-β superfamily and is a potent negative regulator of skeletal muscle development and growth. Dysfunction of MSTN gene either by natural mutation or induced through genetic manipulation (knockout or knockdown) has been reported to increase the remarkable muscle mass in mammalian species. RNA interference (RNAi) is the most promising method for inhibition of gene expression that can be utilized for MSTN gene knockdown by developing short hairpin RNA (shRNA) construct against it. We utilized three antisense RNA expressing vectors with six constructs to knockdown MSTN gene in in vitro caprine myoblast cell culture system. We observed that all six shRNA constructs were successful in MSTN silencing with efficiency ranging from 7 to 46 % by quantitative real-time PCR and up to 19 % by western blotting. The significant upregulation of interferon response gene OAS1 (5- to 11-fold) in cells transfected with shRNA constructs were indicative of induction of interferon response. This RNAi-based method of increasing muscle mass could provide an alternative strategy to gene knockout methods for improving the production traits and economic properties of livestock.     

Effect of fractional crystallization on composition and thermal characteristics of avocado (Persea americana) butter

Fractionation of plant butters like avocado (Persea americana) may yield useful fat derivatives with distinct physical and functional properties. In this study, avocado butter was sequentially crystallized in acetone at 5 °C (2 h), 0 °C (24 h), and ?20 °C (24 h) until the mother-liquor becomes devoid of any crystal formation. The high-melting stearin isolated at 5 °C and low-melting olein isolated at ?20 °C were compared with the original sample in terms of fatty acid and triacylglycerol (TAG) compositions and thermal profiles. With respect to the original sample, low-melting olein is possessed with higher proportions of diunsaturated and triunsaturated TAG while high-melting stearin is found to become enriched with disaturated and trisaturated TAG molecules. These differences in compositions make the basic physico-chemical parameters as well as the thermal profiles of high-melting stearin and low-melting olein to be distinctly different from those of the original sample.     

Candida Biofilm Disrupting Ability of Di-rhamnolipid (RL-2) Produced from Pseudomonas aeruginosa DSVP20

Biosurfactant produced from Pseudomonas aeruginosa DSVP20 was evaluated for its potential to disrupt Candida albicans biofilm formed on polystyrene (PS) surfaces in this investigation. P. aeruginosa DSVP20 exhibited optimum production of biosurfactant (5.8 g?L^?1) after 96 h of growth with an ability to reduce surface tension of the aqueous solution from 72 to 28 mN?m^?1. Analysis of purified biosurfactant with FT-IR, ¹H and ¹³C NMR and MALDI-TOF MS revealed it to be di-rhamnolipid (RL-2) in nature. Biofilm disrupting ability of RL-2 (0.16 mg?mL^?1) on Candida cells when checked using XTT reduction assay revealed that about 50 % of the cells remain adhered to 96-well plate after 2 h of treatment, while up to 90 % reduction in pre-formed C. albicans biofilm on PS surface was observed with RL-2 (5.0 mg?mL^?1) in a dose-dependent manner. Microscopic analyses (SEM and CLSM) further confirm the influence of RL-2 on disruption of Candida biofilm extracellular matrix on PS surface which can be exploited as a potential alternative to the available conventional therapies.     

Cationic gel crystals and amorphous solids of lightly cross-linked poly(2-vinylpyridine) spheres in the deionized aqueous suspension

Colloidal crystallization and amorphous solidification of deionized suspensions of the polydispersed cationic gel spheres of lightly cross-linked poly(2-vinylpyridine), CAIBA-P2VP (107～113 nm in diameter, ±19～22 nm in dispersity), have been studied from the reflection spectroscopy, morphology, phase diagram, and elastic property. Crystallization takes place even for the polydispersed cationic gel spheres by the significant contribution of the extended electrical double layers formed around the spheres. Critical concentrations of melting coexisted with ion exchange resins were around 0.02 in volume fraction and high compared with those of other cationic and anionic gel crystals examined hitherto. The densities (ρ) of CAIBA-P2VP in suspension state, i.e., weight percent of the gel spheres divided by the corresponding volume percent, was around 0.3. The ρ values decreased sharply with decreasing size of P2VP gel spheres, which supports the small gel spheres containing much water inside and being softer than the large ones. The closest intersphere distances of the crystals and/or amorphous solids were much longer than the hydrodynamic diameters of the gel spheres especially at low sphere concentrations. Fluctuation parameters (b) evaluated from the rigidities of CAIBA-P2VP (0.15～0.28) were large compared with those of gel crystals of large-sized P2VP-based cationic gel spheres, anionic thermosensitive gel spheres of poly(N-isopropylacrylamide) (0.05～0.09) and further much larger than those of typical colloidal hard spheres (around 0.03). The dispersity in sphere size played an important role for distinguishing crystal and amorphous solid. Importance of the extended electrical double layers around the cationic gel spheres is supported in addition to the excluded volume effect of the sphere themselves on the crystallization and/or solidification.     

Poly(4-vinylpyridine-co-aniline)-modified electrode—synthesis, characterization, and application as cadmium(II) ion sensor

A poly(4-vinylpyridine-co-aniline) (poly(4VP-co-Ani))-based solid-state ion sensor for cadmium (Cd) was developed. This was obtained from studies done on a number of selected monomers electropolymerized onto a poly(4vinylpyridine) (P4VP)-modified graphite pencil rod, surface characterizing them and then analyzing their performances as a Cd(II) ion sensor. Among them, the membrane of poly(4VP-co-Ani) at a mole ratio of 0.05:0.15 was found to be the best. The fabricated poly(4VP-co-Ani) solid-state electrode had a linear response of 1?×?10^?6 to 1?×?10^?2?M Cd²⁺, slope of 29.4?±?0.5 mV decade^?1, detection limit of 7.94?×?10^?7?M Cd²⁺, and response time of 15 s at pH 4.5–8.5 with excellent selectivity. The sensor was operationally stable within a period of 3 months. The proposed sensor was tested for determination of Cd²⁺ in environmental, plant, and pharmaceutical samples. The analyses were comparable to the standard atomic absorption spectrophotometric method.     

Poly(HEMA-co-NBMI) Monolithic Cryogel Columns for IgG Adsorption

Supermacroporous poly(2-hydroxyethyl methacrylate-co-1,5-naphthalene bismaleimide) [poly(HEMA-co-NBMI)] monolithic cryogel column was prepared by free radical cryo-copolymerization of HEMA with NBMI as a hydrophobic functional comonomer and N,N′-methylene-bisacrylamide as cross-linker directly in a plastic syringe for adsorption of albumin. The monolithic cryogel contained a continuous polymeric matrix which has interconnected pores of 10–100 μm size. Poly(HEMA-co-NBMI) cryogel was characterized by swelling studies, FTIR and scanning electron microscopy. The equilibrium swelling degree of the poly(HEMA-co-NBMI) cryogel was 10.5 g of H₂O/g dry cryogel. Poly(HEMA-co-NBMI) cryogel was used in the adsorption/desorption of IgG from aqueous solutions. The maximum amount of IgG adsorption from aqueous solution in phosphate buffer was 98.20 mg/g polymer at pH 7.0. The nonspecific adsorption of IgG onto plain poly(HEMA) cryogel was very low (2.79 g/g polymer). It was observed that IgG could be repeatedly adsorbed and desorbed with the poly(HEMA-co-NBMI) cryogel without significant loss of adsorption capacity.     

Cellulose propionate/poly(N-vinyl pyrrolidone-co-vinyl acetate) blends: dependence of the miscibility on propionyl DS and copolymer composition

Blend miscibility of cellulose propionate (CP) with synthetic copolymers comprising N-vinyl pyrrolidone (VP) and vinyl acetate (VAc) units was examined, and a data map was constructed as a function of the degree of substitution (DS) of CP and the VP fraction in the copolymer component. Results of differential scanning calorimetry and Fourier transform infrared measurements indicated that the pairing of CP/P(VP-co-VAc) formed a miscible or immiscible blend system according to the balance in effectiveness of the following factors: (1) hydrogen bonding between residual hydroxyls of CP and VP carbonyls of P(VP-co-VAc); (2) steric hindrance of propionyl side-groups to the interaction specified in (1); (3) intramolecular repulsion between the two units constituting the vinyl copolymer; and, additionally, (4) structural affinity between two segmental moieties involving the propionyl group and VAc unit, respectively. The factor 3 inducing intercomponent attraction is responsible for the appearance of a so-called “miscibility window” in the miscibility map, and the factor 4 substantially expands the miscible region whole, wider relative to those in the maps for the corresponding blend series based on cellulose acetate and butyrate. In further refined estimation by dynamic mechanical analysis and T _1ρ ^H quantification in solid-state ¹³C NMR, it was found that the miscible blends of hydrogen-bonding type (using CPs of DS < 2.7) were completely homogeneous on a scale within a few nanometers, whereas the polymer pairs situated in the window region (using CPs of DS > 2.7) formed blends exhibiting a somewhat larger size of heterogeneity (ca. 5–20 nm).     

Microencapsulation of nisin in alginate-cellulose nanocrystal (CNC) microbeads for prolonged efficacy against Listeria monocytogenes

The present study was undertaken to develop edible nisin-microencapsulated beads in order to inhibit growth of Listeria monocytogenes in ready-to-eat (RTE) ham. Different concentrations of nisin (16, 31, and 63 μg/ml) were microencapsulated into alginate-cellulose nanocrystal beads. Microencapsulation kept the available nisin (63 μg/ml) content 20 times greater compared with free nisin (63 μg/ml) during 28 days of storage at 4 °C. Results showed that 63 μg/ml microencapsulated nisin exhibited 31.26 μg/ml available nisin content after 28 days of storage at 4 °C, whereas there was no available nisin content left for free nisin. Cooked ham slices were then coated by the microencapsulated nisin beads, inoculated with L. monocytogenes [~3 log colony-forming units (CFU)/g], and stored at 4 °C under vacuum packaging for 28 days. The beads containing 16, 31, and 63 μg/ml nisin significantly (P ≤ 0.05) reduced the L. monocytogenes counts by 2.65, 1.50, and 3.04 log CFU/g after 28 days of storage compared with free nisin. Furthermore, microencapsulated nisin beads did not change the physicochemical properties (pH and color) of RTE ham during storage.     

Toll-like Receptors Gene Expression in the Gastrointestinal Tract of Salmonella Serovar Pullorum-Infected Broiler Chicken

Salmonella enterica serovar Pullorum causes substantial mortality in chicks as well as results in persistent infection and vertical transmission in layer birds. An effective innate immune response in the early stages of infection could reduce bacterial colonization and mortality in chicks and persistency of infection in later stages. Toll-like receptors (TLRs), important components of innate immune response, plays a pivotal role in early recognition of pathogen as well as in the initiation of robust and specific adaptive immune response. In the present study, we quantified the expression levels of chicken TLRs (1LA, 1LB, 2A, 2B, 3, 4, 5, 7, 15, and 21) mRNA by quantitative real-time PCR in the gastrointestinal (GI) tissues (duodenum, jejunum, ileum, and cecum) of 3-day-old broiler chicks after 24 h of oral infection with S. enterica serovar Pullorum. We found significant upregulation of TLRs (TLR2, TLR4, TLR21) mRNA expressions in GI tract tissues after S. Pullorum infection. The exceptions were for TLR3 and TLR15 with decrease in the expression levels in the jejunum after infection. TLR4 gene expression was significantly (P?<?0.05) upregulated in the duodenum and ileum of infected chicks. Gene expression for some of the TLRs (TLR1LA, ILB, 2B, and TLR5) remained unchanged after infection with S. Pullorum in all the GI tissues studied. Most substantial change in gene expression was found for TLR21, being significantly (P?<?0.05) upregulated in all the tissues investigated. The differential expression levels of TLRs shed light on tailored innate immune response induced by S. Pullorum during the early stages of infection in chicks.     

Characterization of poly(2-vinylpyridine)-block-poly(methyl methacrylate) copolymers and blends of their homopolymers by liquid chromatography at critical conditions

Poly(2-vinylpyridine)s (P2VPs) are important polymers with extensive applications in modern day material science. P2VP is an exceptional case for liquid chromatography because of certain polar interactions with most of the stationary phases. In the present study, we established the critical adsorption point (CAP) of P2VP for the first time. The effectiveness of the method is demonstrated by analyses of blends and block copolymers of P2VP and PMMA. The CAP of PMMA is established for determination of molar mass of P2VP component of above mentioned blends and block copolymers. The methods successfully demonstrate the separation of both types of homopolymers from the rest of the samples in conjunction with the determination of molar mass distribution of noncritical block or component. Graphical Abstract

?     

Passive Immunization of Crayfish (<Emphasis Type="Italic">Procambius clarkiaii</Emphasis>) with Chicken Egg Yolk Immunoglobulin (IgY) Against White Spot Syndrome Virus (WSSV)

White spot syndrome virus (WSSV) is a major cause of mortality in shrimp lacking a true adaptive immune response. In this study, high activity egg yolk immunoglobulin (IgY) against WSSV for passive immunization of crustaceans was already prepared as crude and purified product, while an indirect enzyme-linked immunosorbent assay test was used for quality control of IgY activity. The effectiveness of IgY of intramuscular injection, oral administration, and immersion was investigated in crayfish (Procambius clarkiaii) against WSSV. The result showed that the groups treated with IgY from inactivated WSSV and DNA vaccine were, respectively, 20% and 80% mortality, which were significant difference in survival rates (P < 0.05) from the positive control groups. The groups in diet added 10% egg yolk powder and 1% IgY power showed 53.3% and 67.7% mortality, respectively, and the immersion showed 46.7% mortality, which have significantly different compared to the positive groups (P < 0.05). These results indicated passive immunization of specific IgY antibodies through intramuscular injection, oral administration, and immersion have effective to protect crayfish against WSSV. It is noteworthy that IgY as feed additive and immersion solution is useful and feasible methods in practical work. Thus, our results suggest that the passive immunization of crayfish with IgY against WSSV will have potential development to prevent and control WSSV in practical culture.     

Thermal analysis, phase transitions and molecular reorientations in [Sr(OS(CH3)2)6](ClO4)2

Thermal analysis (TG/DTG/QMS), performed for [Sr(OS(CH₃)₂)₆](ClO₄)₂ in a flow of argon and in temperature range of 295–585 K, indicated that the compound is completely stable up to ca. 363 K, and next starts to decompose slowly, and in the temperature at ca. 492 K looses four (CH₃)₂SO molecules per one formula unit. During further heating [Sr(DMSO)₂](ClO₄)₂ melts and simultaneously decomposes with explosion. Differential scanning calorimetry (DSC) measurements performed in the temperature range of 93–370 K for [Sr(DMSO)₆](ClO₄)₂ revealed existence of the following phase transitions: glass ? crystal phase Cr5 at T _g  ≈ 164 K (235 K), phase Cr5 → phase Cr4 at $ T_{\text{c6}}^{\text{h}} $  ≈ 241 K, phase Cr4 → phase Cr3 at $ T_{\text{c5}}^{\text{h}} $  ≈ 255 K, phase Cr3 → phase Cr2 at $ T_{\text{c4}}^{\text{h}} $  ≈ 277 K, phase Cr2 ? phase Cr1 at $ T_{\text{c3}}^{\text{h}} $  ≈ 322 K and $ T_{\text{c3}}^{\text{c}} $  ≈ 314 K, phase Cr1 ? phase Rot2 at $ T_{\text{c2}}^{\text{h}} $  ≈ 327 K and $ T_{\text{c2}}^{\text{c}} $  ≈ 321 K and phase Rot2 ? phase Rot1 at $ T_{\text{c1}}^{\text{h}} $  ≈ 358 K and $ T_{\text{c1}}^{\text{c}} $  ≈ 347 K. Entropy changes values of the phase transitions at $ T_{\text{c1}}^{\text{h}} $ and $ T_{\text{c2}}^{\text{h}} $ (?S ≈ 79 and 24 J mol^?1 K^?1, respectively) indicated that phases Rot1 and Rot2 are substantially orientationally disordered. The solid phases (Cr1–Cr5) are more or less ordered phases (?S ≈ 7, 10, 4 and 3 J mol^?1 K^?1, respectively). Phase transitions in [Sr(DMSO)₆](ClO₄)₂ were also examined by Fourier transform middle infrared spectroscopy (FT-MIR). The characteristic changes in the FT-MIR absorption spectra of the low- and high-temperature phases observed at the phase transition temperatures discovered by DSC allowed us to relate these phase transitions to the changes of the reorientational motions of DMSO ligands and/or to the crystal structure changes.     

Isolation,Purification, and Characterization of Antimicrobial Compound 6-[1,2-dimethyl-6-(2-methyl-allyloxy)-hexyl]-3-(2-methoxy-phenyl)-chromen-4-one from Penicillium sp. HT-28

A fungal culture (Penicillium sp., HT-28), isolated from soil has been evaluated for its bioactivity, which showed broad spectrum antimicrobial activity and was effective against methicillin-resistant Staphylococcus aureus (MRSA) also. Statistical optimization of the medium by response surface methodology (RSM) enhanced the antimicrobial activity up to 1.8-fold. Column chromatography was used to isolate the active compound (A), which was characterized to be 6-[1,2-dimethyl-6-(2-methyl-allyloxy)-hexyl]-3-(2-methoxy-phenyl)-chromen-4-one by various spectroscopic techniques such as infrared (IR), ¹H and ¹³C nuclear magnetic resonance (NMR) spectra, and mass spectroscopy. Minimum inhibitory concentration (MIC) of the active compound (A) ranged from 0.5 to 15 μg/mL. Viable cell count studies of the active compound (A) showed S. aureus, Escherichia coli, Staphylococcus epidermidis, and Salmonella typhimurium 1 to be the most sensitive. The compound retained its bioactivity after treating it at 100 °C for 1 h. Furthermore, the compound (A) when tested for its biosafety was found neither to be cytotoxic nor mutagenic. The study demonstrated that an apparently novel compound isolated from Penicillium sp. (HT-28) seems to be a stable and potent antimicrobial.     

Effects of ELF Magnetic Field in Combination with Iron(III) Chloride (FeCl3) on Cellular Growth and Surface Morphology of Escherichia coli (E. coli)

This study investigated the effects of extremely low frequency (ELF) magnetic field with/without iron(III) chloride (FeCl₃) on bacterial growth and morphology. The ELF exposures were carried out using a pair of Helmholtz coil-based ELF exposure system which was designed to generate 50 Hz sinusoidal magnetic field. The field was approximately uniform throughout the axis of the coil pair. The samples which were treated or non-treated with different concentrations FeCl₃ were exposed to 50 Hz, 2 millitesla (mT) magnetic field for 24 h. ELF effect on viability was assessed in terms of viable colony counts (in colony-forming unit per milliliter) with the standard plate count technique. Scanning electron microscopy was used to investigate the magnetic field effect on surface morphology of Escherichia coli. No significant results were seen in terms of cell viability between ELF and sham-exposed bacterial strains. Similarly, FeCl₃ treatment did not change cell viability of E. coli samples. However, we observed some morphological changes on E. coli cell surfaces. Pore formations and membrane destruction were seen on the surface of 24 h ELF field-exposed cells. We concluded that ELF magnetic field exposure at 2 mT does not affect cell viability; however, it may affect bacterial surface morphology.     

Activation of Kraft Lignin by an Enzymatic Treatment with a Versatile Peroxidase from Bjerkandera sp. R1

Enzymatic lignin activation may be an environmentally friendly alternative to the use of chemicals in the production of wood fibers composites. Most studies on enzymatic activation of lignin for improving the adhesion of lignocellulosic products have been carried out using laccases. In this work, the use of a versatile peroxidase (VP) from the white-rot fungus Bjerkandera sp. (anamorph R1) for activating Kraft lignin was studied. The effect of enzyme dosage, incubation time, and H₂O₂ addition profile on lignin activation was evaluated by quantifying the phenoxy radicals formed using electron paramagnetic resonance (EPR) spectroscopy. Two alternative enzymatic systems based on the use of VP (a two-stage and an enzymatic cascade system) were also assayed. At optimal conditions (dose of 15 U?g^?1 and continuous addition of H₂O₂ (5.24 μmol?h^?1) during 1 h) the content of phenoxy radicals was doubled as compared with an untreated control. Moreover, using the two-stage VP system, a lignin activation similar to that found at optimal conditions could be reached in a shorter time.     

Investigation into the crystal structure of bis(pyridine)-bis(trichloroacetato) copper(II) and its electrophotochemical properties

A novel chained Cu(II) complex was synthesized from trichloroacetato copper(II) and pyridine in ethanol solvent, and characterized by elemental analysis and infrared (IR) spectroscopy. The special crystal structure of the Cu(II) complex was determined by X-ray single-crystal diffraction. The results indicate that a chained structure of the Cu(II) complex formed through intermolecular hydrogen bonds. Cu(CCl₃COO)₂(C₅H₅N)₂(H₂O) was monoclinic, with unit cell P21/c and cell parameters as follows: a = 14.389(3) Å, b = 7.1911(14) Å, c = 23.107(8) Å, V = 2,257.5(10) Å³, Z = 4, M _r = 564.51, D _c = 1.661 mg/m³, T = 293(2) K, F(000) = 1,124, μ(Mo K_α) = 1.704 mm^?1, R = 0.0984, and ωR = 0.2791. The electrochemical behavior of the Cu(II) complex on a glassy carbon working electrode determined by cyclic voltammetry showed the electrochemical activity of the title compound at 0.2 to ?0.3 V (versus SCE) in NH₃–NH₄Cl buffer solution (pH 9.2), and the redox peak current of the complex had a good linear relationship with the square root of the scan rate in the range 0.02–0.2 V/s.     

Lymphatic targeting of hematoporphyrin monomethyl ether using poly (butyl-cyanoacrylate) based nanoparticle drug delivery system

The traditional treatment has inevitable drawbacks of nonspecific lymph targeting, poor therapeutic efficiency and residual metastatic for advanced cancer patients with lymph node metastases. To overcome these shortcomings, we prepare a nano-carrier drug delivery system. Photosensitizer hematoporphyrin monomethyl ether (HMME)-loaded poly (n-butylcyanoacrylate) nanoparticles (PBCA-NPs) was prepared successfully. The particle size was approximately 160 nm, the envelopment rate was 87.9%, and the drug loading rate was about 13.4%. The drug release study in vitro showed that the cumulative release rates of HMME-PBCA-NPs group was much less than free HMME group. The drug distribution in different tissues showed that the peak-reach time was 3 h in free HMME group and 6 h in nanoparticles group. All of these results confirmed the slow release characteristic of nanoparticles. In lymph node tissues, the HMME concentrations in HMME-PBCA-NPs group were much higher than those of the free HMME group at any time points we tested, in which the maximum difference concentration of HMME appeared at 6 h (1.2884?±?0.04695 vs. 0.0438?±?0.00558 µg/mg) after drug delivery. The mesenteric lymph nodes of rabbits were enlarged obviously in the NP group than in free HMME group at 6 h after drug delivery. All of these results confirmed the slow release characteristic and the lymphatic targeting characteristic of nanoparticles. In summary, we developed a lymphatic targeting nanoparticles drug delivery system successfully, which showed perfect lymph targeting and has the potential to be a new therapy strategy for advanced cancer patients with lymph node metastasis.     

Enantiomeric Composition Tests of Ketoprofen in Equine Plasma and Urine as Diastereomeric (S)-(-)-1-Phenylethylamides by Achiral GC–MS

The enantiomeric composition of ketoprofen in equine plasma and urine after administration of a commercial racemic ketoprofen product were determined as diastereomeric (S)-(-)-1-phenylethylamidation by achiral gas chromatography–mass spectrometry in selected ion monitoring mode. This method showed linearity (r ≥ 0.9986) over the range tested (5.0–5,000 ng), with acceptable precision (% RSD ≤ 9.5) and accuracy (% RE = ?3.7–7.3). The ratio of (S)-ketoprofen in plasma after 6.0 h and in urine after 71.0 h increased progressively to final values of 67.3 ± 0.1 and 91.9 ± 2.2%, respectively, attributable to the inversion of (R)-ketoprofen to (S)-ketoprofen.     

Tetranuclear manganese (III) salicylaldoxime ensemble

Crystal structure of {[Mn(salicylaldoximeH)(salicylaldoxime)]₄} · 3CHCl₃ 1 formed by the interaction of MnCl₂ · 4H₂O and salicylaldoxime in a 1:1 ratio is described. The compound crystallizes in the orthorhombic space group Pbca (No 61) with the lattice parameters; a = 27.769 (3), b = 22.672 (2), c = 21.650 (2) Å, V = 13630 (2) Å³, Z = 8, R ₁ = 0.0776, wR ₂ = 0.2356, S = 1.164. The cluster with four Mn (III) centers formed by four terminal and four bridging salicylaldoxime ligands results in a central rotating wheel-like core with the Mn–Mn separation varying from 3.531 to 3.576 Å and with the diagonal distances being 4.156–4.165 Å. Four intramolecular H-bonds between a terminal oxime (NOH) group and the adjacent phenolate oxygen atom of another ligand stabilize the structure of the cluster. Spectral, magnetic, and cyclic voltammetry studies corroborate a stable Mn (III) tetramer.