Multi-Hollow Surface Dielectric Barrier Discharge for Bacterial Biofilm Decontamination

The plasma-activated gas is capable of decontaminating surfaces of different materials in remote distances. The effect of plasma-activated water vapor on Staphylococcus epidermidis, methicillin-resistant Staphylococcus aureus, Pseudomonas aeruginosa, and Escherichia coli biofilm contamination was investigated on the polypropylene nonwoven textile surface. The robust and technically simple multi-hollow surface dielectric barrier discharge was used as a low-temperature atmospheric plasma source to activate the water-based medium. The germicidal efficiency of short and long-time exposure to plasma-activated water vapor was evaluated by standard microbiological cultivation and fluorescence analysis using a fluorescence multiwell plate reader. The test was repeated in different distances of the contaminated polypropylene nonwoven sample from the surface of the plasma source. The detection of reactive species in plasma-activated gas flow and condensed activated vapor, and thermal and electrical properties of the used plasma source, were measured. The bacterial biofilm decontamination efficiency increased with the exposure time and the plasma source power input. The log reduction of viable biofilm units decreased with the increasing distance from the dielectric surface.     

Plasma Activation of Wood Surface by Diffuse Coplanar Surface Barrier Discharge

Radial cuts of Pedunculate oak (Quercus robur L.) heartwood was activated by Diffuse Coplanar Surface Barrier Discharge (DCSBD) plasma. The plasma treatment resulted in a considerable increase of free surface energy and in the substantial reduction of 50 μl water droplet uptake time. FTIR analysis confirmed the formation of additional polar functional groups on the wood surface due to the plasma treatment. This is consistent with the shift of wood surface pH level towards more acidic values. The energy efficiency of the DCSBD plasma treatment is better comparing to the known volume dielectric barrier discharge treatment method.     

Plasma Treatment of Glass Surfaces Using Diffuse Coplanar Surface Barrier Discharge in Ambient Air

We report a study on the treatment of flat glass surfaces by ambient air atmospheric pressure plasma, generated by a dielectric barrier discharge of coplanar arrangement of the electrode system—the diffuse coplanar surface barrier discharge (DCSBD). The plasma treatment of glass was performed in both static and dynamic modes. With respect to wettability of the glass surface, treatment in static mode resulted in non-uniform surface properties, whereas dynamic mode provided a fully uniform treatment. A water contact angle measurement was used to determine the efficiency of plasma treatments in dynamic mode and also to investigate a hydrophobic recovery of plasma treated glass surfaces. The X-ray photoelectron spectroscopy measurements showed a decrease of overall carbon concentrations after plasma treatment. A deconvolution of C1s peak, showed that a short plasma treatment led to decrease of C–C bonds concentration and increases of C–O and O–C=O bond concentrations. An enhancing influence of the glass surface itself on DCSBD diffuse plasma was observed and explained by different discharge onsets and changes in the electric field distribution.     

Silicon Dioxide Coating of Titanium Dioxide Nanoparticles from Dielectric Barrier Discharge in a Gaseous Mixture of Silane and Nitrogen

The coating of titanium dioxide nanoparticles with silicon dioxide has been carried out by dielectric barrier discharge (DBD) plasma treatments to enhance the thermostability of Titania for applications at high temperature processes. During the first coating processing step, a closed film of silicon nitride was produced via plasma treatment in a gaseous mixture of silane and nitrogen, while atmospheric surface contaminations got mainly removed. In the second processing step, the DBD plasma treatment in oxygen or air was used to convert the silicon nitride mainly into silicon dioxide. Remaining carbon impurities at the interfaces between titanium dioxide and silicon nitride after the nitrogen/silane plasma treatment were subsequently removed simultaneously. Atomic force microscopy and X-ray photoelectron spectroscopy were employed to study the DBD plasma treatments of the TiO₂ nanoparticles.     

Synthesis of gold nanoparticles using herbal Acorus calamus rhizome extract and coating on cotton fabric for antibacterial and UV blocking applications

Gold nanoparticles (AuNPs) have been synthesized by greener method using chloroauric acid as precursor and extract of Acorus calamus rhizome as reducing agent. Formation of AuNP was confirmed by the presence of Surface Plasmon Resonance (SPR) peak in UV–Visible spectral analysis. XRD and FT-IR spectral analyses were performed for characterization. SEM images show spherical morphology and HR-TEM images reveal nanosize of AuNPs. The AuNPs were then coated on cotton fabric by pad-dry-cure method and characterized by SEM with EDAX technique. The results reveal the deposition of AuNPs on the surface of cotton fabric. Uncoated cotton, neat extract coated cotton and extract containing AuNPs coated cotton fabrics were then tested for antibacterial activity against Gram positive (Staphylococcus aureus) and Gram negative (Escherichia coli) bacterial strains by AATCC 100 test method. It showed that the extract containing AuNPs coated cotton fabric had higher antibacterial activity than other test samples against E. coli. UV-DRS analysis performed on extract containing AuNPs coated cotton fabric showed improved UV-blocking property than uncoated cotton fabric and neat extract coated cotton fabric.     

An in vitro bacterial adhesion assessment of surface-modified medical-grade PVC

Medical-grade polyvinyl chloride was surface modified by a multistep physicochemical approach to improve bacterial adhesion prevention properties. This was fulfilled via surface activation by diffuse coplanar surface barrier discharge plasma followed by radical graft copolymerization of acrylic acid through surface-initiated pathway to render a structured high density brush. Three known antibacterial agents, bronopol, benzalkonium chloride, and chlorhexidine, were then individually coated onto functionalized surface to induce biological properties. Various modern surface probe techniques were employed to explore the effects of the modification steps. In vitro bacterial adhesion and biofilm formation assay was performed. Escherichia coli strain was found to be more susceptible to modifications rather than Staphylococcus aureus as up to 85% reduction in adherence degree of the former was observed upon treating with above antibacterial agents, while only chlorhexidine could retard the adhesion of the latter by 50%. Also, plasma treated and graft copolymerized samples were remarkably effective to diminish the adherence of E. coli.     

Plasma modification of polypropylene surfaces and grafting copolymerization of styrene onto polypropylene

The surface of polypropylene(iPP) is modified with glow discharge plasma of Ar,so that the modified surfaces of iPP films are obtained.The studies of scanning electron microscopy(SEM) show the surface etching pattern of iPP films. The chemical structures of iPP films are confirmed by X-ray photoelectron spectroscopy(XPS) and Fourier transform infrared(FTIR) spectroscopy.The wetting properties of modified surfaces of iPP films are characterized by contact angle, and the free energy of surfaces is calculated.The free radical of modification surfaces of iPP is measured by chemical method.The surfaces of iPP are achieved with Ar plasma treatment followed by grafting copolymerization with styrene(St) in St.The grafting polymer of St onto iPP is characterized by FTIR.The grafting rate is dependent on plasma exposure time and discharge voltage.The studies show that homopolymerization of St is undergone at the same time during the grafting-copolymerization of St onto iPP.     

Surface Energy and Adhesive Properties of Polyamide 12 Modified by Barrier and Radio-Frequency Discharge Plasma

Summary. The polyamide 12 foil with sufficient surface and adhesive properties to other substrates can be prepared by discharge plasma modification. For improvement of bonding and printing of polymer a surface barrier discharge plasma in N₂ and O₂ as well as a radio-frequency discharge plasma in air has been studied. A significant increase in surface energy of the polymer as well as in strength of adhesive joint to more polar polymer was found. The chemical changes of PA 12 modified by plasma were analyzed using fourier transform infra red – attenuated total reflection (FTIR–ATR) spectroscopy, and X-ray photoelectron spectroscopy (XPS) measurements. The observed changes of surface properties of the polymer due to aging were not important.     

Surface Energy and Adhesive Properties of Polyamide 12 Modified by Barrier and Radio-Frequency Discharge Plasma

The polyamide 12 foil with sufficient surface and adhesive properties to other substrates can be prepared by discharge plasma modification. For improvement of bonding and printing of polymer a surface barrier discharge plasma in N₂ and O₂ as well as a radio-frequency discharge plasma in air has been studied. A significant increase in surface energy of the polymer as well as in strength of adhesive joint to more polar polymer was found. The chemical changes of PA 12 modified by plasma were analyzed using fourier transform infra red – attenuated total reflection (FTIR–ATR) spectroscopy, and X-ray photoelectron spectroscopy (XPS) measurements. The observed changes of surface properties of the polymer due to aging were not important.     

Preparation and Characterization of Chitosan-Coated DBD Plasma-Treated Natural Rubber Latex Medical Surgical Gloves with Antibacterial Activities

The natural rubber latex (NRL) film taken from medical surgical gloves was surface-modified with a dielectric barrier discharge (DBD) plasma treatment under an air environment. The results showed that surface hydrophilicity of the NRL film increased after the plasma treatment due to the presence of oxygen-containing polar groups on the plasma-treated surface. An increase in plasma treatment time increased the surface roughness of the NRL film, and eventually decreased the mechanical properties. From the obtained results, the optimum plasma treatment time of 20?s was chosen. After immersion in a chitosan solution, the amount of chitosan deposited on the plasma-treated NRL film increased with increasing chitosan concentrations. The chitosan coating smoothed the surface of the plasma-treated NRL film and also improved the mechanical properties. The highest antibacterial activities of the chitosan-coated DBD plasma-treated NRL film against both Staphylococcus aureus and Escherichia coli were achieved when a 2?%(w/v) chitosan solution was used for the coating.     

Application of Dielectric Barrier Discharge for Waste Water Purification

This study considers treatment of real city rain sewage under the action of an oxygen dielectric barrier discharge (DBD) at atmospheric pressure in the presence or absence of TiO₂ catalyst in the plasma zone. The DBD discharge has been shown to have high decomposition efficiency (up to 98%) for oil hydrocarbons, phenols and synthetic surfactants. The discharge action resulted in the decrease of heavy metal (Pb, Cd, Fe, Mn) content as well. In a plasma-catalytic hybrid process, the efficiency of organic substances decomposition was higher than efficiency for the DBD treatment without catalyst.     

Acceleration of Acetone Destruction Process under Synergistic Action of Photocatalytic Oxidation and Barrier Discharge

Separate and joint work of photocatalytic oxidation based on TiO₂ and surface barrier discharge as a source of active oxygen and UV radiation is investigated for acetone vapors destruction under ambient air conditions. Experiments were carried out in a 404 l airtight Plexiglas chamber and used five different combinations of photocatalyst, barrier discharge and ultraviolet irradiation under identical initial concentration (∼170 ppm) of acetone. It is shown for the synergistic action of photocatalytic method and barrier discharge that the initial rate of acetone decomposition per watt of input power increases in more than 1.5 times compared to photocatalytic oxidation. Under operation of plasma of barrier discharge, intermediate products are formed such as CO, acetic acid, acetaldehyde and methane nitrate (CH₃NO₃). These products are not detected for photocatalytic oxidation. Some interesting features of kinetics of acetone decomposition and formation of intermediate products with participation of barrier discharge are revealed.     

Plasma Jet and Dielectric Barrier Discharge Treatment of Wheat Seeds

Plasma Chemistry and Plasma Processing - Low-temperature plasma treatment of wheat seeds was performed by a plasma jet and dielectric barrier discharge, both at atmospheric pressure. The influence...     

Modification of Polyimide in Barrier Discharge Air-Plasmas: Chemical and Morphological Effects

Chemical and physical modifications of polyimide (PI) surfaces caused by an air plasma have been studied. The plasma-induced surface changes of PI were investigated by using a local dielectric barrier discharge (DBD) in air at atmospheric pressure and room temperature as a function of the plasma exposure time and plasma power, while the excitation frequency was kept constant at about 130 kHz. The first results obtained in this work suggest that DBDs operating in air at atmospheric pressure can be an efficient alternative plasma source for surface treatment of polymers: a short time air plasma treatment of few seconds leads to chemical and physical changes including the rise of wettability, surface oxidation, and enhancement of surface roughness. Therefore, this simple kind of dry surface treatment seems to be an effective, low cost method for production of well-adhering subsequent layers such as metal films, paints, glues, etc. on DBD pretreated polymers.     

Evaluation of Phoma sp. Biomass as an Endophytic Fungus for Synthesis of Extracellular Gold Nanoparticles with Antibacterial and Antifungal Properties

The aim of our study was to examine the different concentrations of AuNPs as a new antimicrobial substance to control the pathogenic activity. The extracellular synthesis of AuNPs performed by using Phoma sp. as an endophytic fungus. Endophytic fungus was isolated from vascular tissue of peach trees (Prunus persica) from Baft, located in Kerman province, Iran. The UltraViolet-Visible Spectroscopy (UV–Vis spectroscopy) and Fourier transform infrared spectroscopy provided the absorbance peak at 526 nm, while the X-ray diffraction and transmission electron microscopy images released the formation of spherical AuNPs with sizes in the range of 10–100 nm. The findings of inhibition zone test of Au nanoparticles (AuNPs) showed a desirable antifungal and antibacterial activity against phytopathogens including Rhizoctonia solani AG1-IA (AG1-IA has been identified as the dominant anastomosis group) and Xanthomonas oryzae pv. oryzae. The highest inhibition level against sclerotia formation was 93% for AuNPs at a concentration of 80 μg/mL. Application of endophytic fungus biomass for synthesis of AuNPs is relatively inexpensive, single step and environmentally friendly. In vitro study of the antifungal activity of AuNPs at concentrations of 10, 20, 40 and 80 μg/mL was conducted against rice fungal pathogen R. solani to reduce sclerotia formation. The experimental data revealed that the Inhibition rate (RH) for sclerotia formation was (15, 33, 74 and 93%), respectively, for their corresponding AuNPs concentrations (10, 20, 40 and 80 μg/mL). Our findings obviously indicated that the RH strongly depend on AuNPs rates, and enhance upon an increase in AuNPs rates. The application of endophytic fungi biomass for green synthesis is our future goal.     

Surface Modification of Polypropylene Non-Woven Fabrics by Atmospheric-Pressure Plasma Activation Followed by Acrylic Acid Grafting

Polypropylene (PP) non-woven fabrics have been activated by an atmospheric-pressure plasma treatment using surface dielectric barrier discharge in N₂ and ambient air. Subsequently, the plasma activated samples were grafted using catalyst-free water solution of acrylic acid. Surface properties of the activated and polyacrylic acid post-plasma grafted non-woven were characterised by scanning electron microscopy, Fourier transform infrared spectroscopy, electron spin resonance spectroscopy, surface energy and dyeability measurements. The grafted non-woven exhibit improved water transport and dyeing properties. The plasma activation in nitrogen plasma gas was more efficient than in air.     

In situ formed silver nanoparticles on glass fibers grafted with polyacrylamide and their antibacterial activity

In this paper, grafted polyacrylamide from the surface of glass fibers was prepared by surface initiated atom transfer radical polymerization in order to control the matrix surface structure and properties. The uniform and stable grafted polymer layer was utilized to prepare silver ions complexes, and then the silver ions were reduced by AlLiH₄ to form in situ silver nanoparticles. The structure, composition, properties and surface morphology of the modified glass fibers were characterized by X-ray photoelectron spectroscopy, fourier transform infrared spectroscopy, thermo gravimetric analysis and scanning electron microscopy. The antibacterial activities of modified glass fibers against E. coli, B. subtilis and S. cerevisiae had been studied respectively by Shake Flask Method. The results show that the antibacterial ratio of Ag nanoparticles loaded glass fibers is significantly improved than that of Ag⁺ loaded, and the highest antibacterial ratio is 72.2% against E. coli.     

Improvement of Atmospheric Water Surface Discharge with Water Resistive Barrier

Atmospheric water surface discharge is a promising method for water treatment. The selection of discharge gap distance must take a pair of conflicting aspects into account: the chemical efficiency grows as the discharge gap distance decreases, while the spark breakdown voltage decreases as the gap distance decreases. To raise the spark breakdown voltage and the chemical efficiency of atmospheric pressure water surface discharge, resistive barrier discharge is introduced in this paper. Both the high voltage electrode and the ground electrode are suspended above water surface to form an electrode-water-electrode discharge system. The water layer plays the role of a resistive barrier which inhibits the growth rate of discharge current as voltage increases. Experiments conducted at different discharge gap distances and water conductivities indicate that both the spark breakdown voltage and the chemical efficiency are remarkably raised in comparison with traditional water surface discharge. After parameter optimization, the discharge reactor is scaled up with activated carbon fiber electrodes and advantages of water resistive barrier discharge are kept.     

Synthesis of Ozone in a Surface Barrier Discharge with a Plasma Electrode

The synthesis of ozone from oxygen in a cylindrical ozonizer operating under surface discharge conditions with a plasma electrode was studied. The conditions of ozone synthesis were optimized. The dependence of ozone concentration and specific energy consumption on gas pressure in the plasma electrode and on distance between the coils of a corona electrode was determined. The results were compared with data obtained with the use of classical surface barrier discharge.__________Translated from Khimiya Vysokikh Energii, Vol. 39, No. 4, 2005, pp. 307–311.Original Russian Text Copyright © 2005 by Alemskaya, Lelevkin, Tokarev, Yudanov.     

The Role of Dielectric Barrier Discharge Atmosphere and Physics on Polypropylene Surface Treatment

Dielectric barrier discharge (DBD) is the discharge involved in corona treatment, widely used in industry to increase the wettability or the adhesion of polymer films or fibers. Usually DBD's are filamentary discharges but recently a homogeneous glow DBD has been obtained. The aim of this paper is to compare polypropylene surface transformations realized with filamentary and glow DBD in different atmospheres (He, N₂, N₂ + O₂ mixtures) and to determine the relative influence of both the discharge regime and the gas nature, on the polypropylene surface transformations. From wettability and XPS results it is shown that the discharge regime can have a significant effect on the surface transformations, because it changes both the ratio of electrons to gas metastables, and the space distribution of the plasma active species. This last parameter is important at atmospheric pressure because the mean free paths are short (m). These two points explain why in He, polypropylene wettability increase is greater by a glow DBD than by a filamentary DBD. In N₂, no significant effect of the discharge regime is observed because electrons and metastables lead to the same active species throughout the gas bulk. The specificity of a DBD in N₂ atmosphere compared to an atmosphere containing oxygen is that it allows very extensive surface transformations and a greater increase of the polypropylene surface wettability. Indeed, even in low concentration and independently of the discharge regime, when O₂ is present in the plasma gas, it controls the surface chemistry and degradation occurs.