Enantioselective one-pot three-component synthesis of propargylamines

[reaction: see text] A copper(I) complex of i-Pr-pybox-diPh has been found to be an efficient catalyst for an enantioselective one-pot three-component synthesis of propargylamines from aldehydes, amines, and alkynes. The reaction has been applied to a wide variety of aromatic aldehydes with excellent yields (up to 99%) and enantiomeric excesses (up to 99% ee). A transition-state model has been proposed to explain the stereochemical outcome of the reaction.     

Enantioselective addition of vinylzinc reagents to 3,4-dihydroisoquinoline N-oxide

Ligand 2a promotes the enantioselective addition of vinylzinc reagents to 3,4-dihydroisoquinoline N-oxide to yield chiral allylic hydroxylamines. With 0.1 equiv of the ligand, the product is obtained in up to 84% ee, whereas with 1.2 equiv of the ligand, the ee is increased to the 90-95% range with a variety of aliphatic, cyclic, and aromatic vinylzinc reagents. This method was used to synthesize the protected unnatural amino acid N-Cbz-d-1,2,3,4-tetrahydroisoquinoline-1-carboxylic acid in three steps from the allylic hydroxylamine.     

Enantioselective addition of alkynylzinc to arylaldehydes catalyzed by azetidino amino alcohols bearing an additional stereogenic center

Chiral azetidino amino alcohol ligands bearing an additional stereogenic center were readily prepared and used as catalysts for the asymmetric addition of alkynylzinc to aromatic aldehydes with enantioselectivities of up to 87% ee. The relationship between the reaction enantioselectivity and the structure of the chiral ligands was also evaluated in this reaction. The experimental results showed that the enantioselectivity level of the reaction was greatly influenced by the second stereogenic center attached to azetidine ring, but the stereochemical sense was only determined by the configuration of the azetidine ring. A possible transition structure for the catalytic asymmetric addition was also proposed.     

Enantioselective addition of chirally modified methyltitanium reagents to aromatic aldehydes

N-Sulfonylated derivatives of norephedrine are excellent ligands for chirally modified methyltitanium reagents, the latter reacting enantioselectively with aromatic aldehydes (ee ~ 90%) to form R-configurated carbinols.     

Enantioselective addition of organolithium reagents to quinoline catalyzed by 1,2-diamines

Some enantiomerically enriched 2-substituted-1,2-dihydroquinolines were obtained by the enantioselective addition of organolithium reagents to quinoline. 1,2-Diamines were used as external chiral ligands and enantiomeric excesses up to 64% were obtained.     

Enantioselective addition of aryllithium reagents to aromatic imines mediated by 1,2-diamine ligands

A variety of optically enriched amines have been obtained by addition of aryllithium reagents to aromatic imines using N,N′-tetramethylcyclohexane-1,2-diamine as chiral ligands. Enantiomeric excesses up to 90% could be obtained.     

Enantioselective addition of alkenylzinc reagents to aldehydes with organoboronates as the alkenyl source

Alkenylboronates were used as a vinyl source in the asymmetric addition of an alkenylzinc reagent to aldehydes catalyzed by a dendritic ligand. The resulting allylic alcohol products were obtained in 66–96% ee and 35–64% yields.     

Enantioselective one-pot conjugate addition of grignard reagents to cyclic enones followed by amidomethylation

Enantioselective conjugate addition of Grignard reagents to enones, catalyzed by Cu-Taniaphos or Josiphos complex, affords chiral enolates. Ensuing one-pot Mannich reaction with TiCl(4)-generated imine leads to aminocarbonyl compounds with benzyloxycarbonyl-protected nitrogen. Both diastereomers of these compounds are isolated in moderate yields but high enantiomeric purities (up to er 97.5:2.5).     

Catalytic asymmetric alkylations of ketoimines. Enantioselective synthesis of N-substituted quaternary carbon stereogenic centers by Zr-catalyzed additions of dialkylzinc reagents to aryl-, alkyl-, and trifluoroalkyl-substituted ketoimines

Catalytic enantioselective alkylations of three classes of ketoimines are reported. Reactions are promoted in the presence 0.5-10 mol % of a Zr salt and a chiral ligand that contains two inexpensive amino acids (valine and phenylalanine) and involve Me2Zn or Et2Zn as alkylating agents. Requisite aryl- and alkyl-substituted alpha-ketoimine esters, accessed readily and in >80% yield on gram scale through a two-step sequence from the corresponding ketones, undergo alkylation to afford quaternary alpha-amino esters in 79-97% ee. Aryl-substituted trifluoroketoimines are converted to the corresponding amines by reactions with Me2Zn, catalyzed by a chiral complex that bears a modified N-terminus. The utility of the catalytic asymmetric protocols is illustrated through conversion of the enantiomerically enriched alkylation products to a range of cyclic and acyclic compounds bearing an N-substituted quaternary carbon stereogenic center.     

Enantioselective nucleophilic addition of organometallic reagents to quinoline: regio-, stereo- and enantioselectivity

Some 2-alkyl-1,2-dihydroquinoline and some 2-aryl-1,2-dihydroquinoline were obtained by enantioselective addition of methyl-, butyl-, phenyl- and 1-naphthyllithium on quinoline. Bisoxazolines were used as external chiral ligands, giving enantiomeric excess up to 79%. The ligand could be used in catalytic amounts without significant loss of enantioselectivity.     

Asymmetric synthesis of metallocenes through enantioselective addition of organolithium reagents to 6-(dimethylamino)fulvene

Enantioselective addition of aryllithiums 2a-d (Ar = Ph (a), 2-MeC(6)H(4) (b), 2-MeOC(6)H(4) (c), 1-naphthyl (d)) to 6-(dimethylamino)fulvene (1) in the presence of (-)-sparteine in toluene at -78 degrees C generated chiral cyclopentadienyllithiums (4) substituted with an N,N-dimethylamino(aryl)methyl group, where the enantioselectivities are 51, 91, 90, and 83% for 4a, 4b, 4c, and 4d, respectively. Treatment of the chiral cyclopentadienides 4 with FeCl(2) or Fe(acac)(2) gave ferrocenes, which contain an N,N-dimethylamino(aryl)methyl side chain on both of the cyclopentadienyl rings. The enantiomeric purity of the chiral ferrocenes 7 thus obtained is 99% ee or higher for those containing a 2-MeC(6)H(4) (7b) or a 2-MeOC(6)H(4) (7c) group.     

Enantioselective addition of organozinc reagents to ketones catalyzed by grafted isoborneolsulfonamide polymers and titanium isopropoxide

The catalytic enantioselective addition of different organozinc reagents, such as diethylzinc, or in situ generated phenylzinc derivatives to simple aryl methyl ketones was accomplished using titanium tetraisopropoxide and a polymeric ligand grafted with trans-1-phenylsulfonylamino-2-isoborneolsulfonylamidocyclohexane, to give the corresponding tertiary alcohols with enantioselectivities of up to >99% ee. Whereas the highest enantioselectivities were obtained in the ethylation process, the highest chemical yields were obtained in the phenylation process. The ligand could be re-used at least three times without any significant loss of activity.     

Enantioselective addition of vinylzinc reagents to aldehydes catalyzed by modular ligands derived from amino acids

[reaction: see text] A series of N-acylethylenediamine-based ligands were synthesized from Boc-protected amino acids. The ligands were screened for the ability to catalyze the asymmetric addition of vinylzinc reagents to aldehydes. Three sites of diversity on the ligands were optimized for this reaction using a positional scanning approach. The optimized ligand 3d was found to catalyze the formation of 15 different (E)-allylic alcohols with enantioselectivities that ranged from 52 to 91% ee and yields that ranged from 40 to 90%. This ligand was especially effective for the reaction of aromatic aldehydes with vinylzinc reagents derived from bulky terminal alkynes. Ligand 3d catalyzed the addition of (E)-(3,3-dimethylbut-1-enyl)(ethyl)zinc to 2-naphthaldehyde to give (R,E)-4,4-dimethyl-1-(naphthalene-1-yl)pent-2-en-1-ol in 89% ee. The ee of this product could be increased to 97% through a single recrystallization.     

Amino thiols versus amino alcohols in the asymmetric alkynylzinc addition to aldehydes

A series of modular amino thiol and amino alcohol ligands have been synthesized in enantiopure form from common enantiopure precursors. Their structures have been optimized for performance in the asymmetric alkynylzinc addition to aldehydes, and a direct comparison of the effect of the S and O coordinating atoms on the catalytic outcome of these ligands has been performed. Amino thiols have shown to be superior as ligands for this type of chemistry.     

Enantioselective synthesis of β-amino alcohols and α-amino acids via a copper catalyzed addition of diorganozinc reagents to N-phosphinoylimines

Enantioenriched β-amino alcohols were prepared via an asymmetric addition of diethylzinc, catalyzed by the BozPHOS·Cu(I) complex, on in situ formed N-phosphinoylimines. The nature of the hydroxyl protecting groups was found to affect the enantioselectivities. Subsequent deprotection and oxidation of N-phosphinoyl β-amino alcohols afforded optically active α-amino acids (97% ee).     

Highly enantioselective alkynylzinc addition to aromatic aldehydes catalyzed by self-assembled titanium catalysts

A highly enantioselective catalyst generated by a combination of BINOL and another ligand with Ti(OiPr)4 was found to be highly effective for the alkynylzinc addition to aromatic aldehydes with enantioselectivities as high as >99%.     

The use of bifunctional catalyst systems in the asymmetric addition of alkynylzinc to aldehydes

The bifunctional ligand 2a showed a more enhanced reactivity than that of the corresponding amino alcohol ligand in the asymmetric addition of alkynylzinc to benzaldehyde. The bifunctional ligand 2a can catalyze the addition of phenylacetylene to various types of aldehydes including aromatic aldehydes, aliphatic aldehydes, and α,β-unsaturated aldehydes with high enantioselectivity (81–98% ee). The conditions of this catalytic process are both mild and simple.