Synthesis, crystal structure and properties of cobalt(II) and nickel(II) coordination polymers supported by functionalized dicarboxylate ligands

Four new coordination polymers of cobalt(II) and nickel(II) with functionalized dicarboxylate ligands, namely, [Co^IIL¹(2,2′-bpy)(H₂O)] (1), [Ni^IIL¹(2,2′-bpy)(H₂O)]·H₂O (2), [Co^II₂(L²)₂(2,2′-bpy)₂(H₂O)] (3) and [Ni^II₂(L²)₂(2,2′-bpy)₂(H₂O)] (4), where H₂L¹ = 2,5-dibenzoylterephthalic acid, H₂L² = 4,6-bis(4-methylbenzoyl)isophthalic acid and 2,2′-bpy = 2,2′-bipyridine, were synthesized and characterized by elemental analysis, IR spectra and thermogravimetric analysis. Complex 1 exhibits a zigzag chain with a C–Hπ interaction between the phenyl ring proton and the phenyl ring of an adjacent chains to form a 2D supramolecular sheet. Complex 2 contains two helical chains which extend into 2D via a C–Hπ interaction between the pyridine ring proton and the pyridine ring. Complexes 3 and 4 are isomorphous with helical chains that extend in the same direction and further link to one another by supramolecular forces into a 2D structure. Moreover, magnetic and luminescence properties have been investigated for 1 and 2, respectively.     

Synthesis of uranium complexes incorporating extended azo-imine ligands: Molecular and electronic structure

The new azo-imine ligands 2,4-di-tert-butyl-6-((2-((2-hydroxyphenyl)diazenyl) phenylimino)methyl)phenol, H₂L¹, 1a, and 2,4-di-tert-butyl-6-((2-((2-hydroxyphenyl) diazenyl)p-chlorophenylimino)phenol, H₂L², 1b, were prepared. Reaction of H₂L¹;1a, and H₂L²;1b, with uranyl nitrate hexahydrate afforded the mononuclear complexes of compositions [U(O)₂(L¹)(H₂O)]; 2a, and [U(O)₂(L²)(H₂O)]; 2b, complexes respectively. The newly synthesised ligands (1a and 1b) and the complexes (2a and 2b) were characterised unequivocally. The x-ray structure of 2a was determined. The tetradentate dianionic ligand (L¹)^2- coordinated the uranium ion equatorially with a water molecule in the same plane. Two axially coordinated oxo ligands completed the overall pentagonal bipyramid geometry around U(VI) ion. Structural pattern, electron transfer properties (oxidation near 1.32 ​V vs Ag/AgCl) and electronic transitions of [U(O)₂(L¹)(H₂O)]; 2a, and [U(O)₂(L²)(H₂O)]; 2b have been rationalized by DFT calculations.     

A novel cis-push–pull effect in cycloruthenated azobenzene thiocarbonyl-containing complexes: crystal and molecular structures of [RuX(CS)(η-C,N-C6H4N=NPh)(PPh3)2](X=Cl, I)

Treatment of [RuHCl(CS)(PPh₃)₃] with Hg(o-C₆H₄N=NC₆H₅)₂ affords [RuCl(CS)(η²C,N-o-C₆H₄N=NC₆H₅)(PPh₃)₂] (1) in good yield, where the cyclometallated azobenzene ligand coordinates through an ortho-C and one azo-N to give a five-membered chelate ring. Reaction of 1 with AgNO₃ followed by NaBr or NaI affords the chloride-exchanged products [RuX(CO)(η²C,N-o-C₆H₄N=NC₆H₅)(PPh₃)₂] (2, 3), whereas reaction of 1 with AgOC(O)Me or NaS₂CNEt₂·2H₂O gives the halide mono-phosphine-substituted complexes [Ru(CS)(LL)(η²C,N-o-C₆H₄NNC₆H₅)(PPh₃)] (4, 5). In the solid-state structures of 1 and 3 there are significant changes in the bond lengths for the cyclometallated azobenzene ligand are observed relative to free azobenzene. These are discussed, with the aid of spectroscopic and crystallographic data, in terms of a cis-push–pull effect.     

Dinuclear nickel(II) complexes with Schiff base ligands: syntheses, structures and bio-relevant catalytic activities

Three Ni(II) complexes of cresol-based Schiff-base ligands, namely [Ni₂(L¹)(NCS)₃(H₂O)₂], (1) [Ni₂(L²)(CH₃COO)(NCS)₂(H₂O)] (2) and [Ni₂(L³)(NCS)₃] (3), (where L¹ = 2,6-bis(N-ethylpyrrolidineiminomethyl)-4-methylphenolato, L² = 2,6-bis(N-ethylpiperidineiminomethyl)-4-methylphenolato and L³ = 2,6-bis{N-ethyl-N-(3-hydroxypropyl iminomethyl)}-4-methylphenolato), have been synthesized and structurally characterized by X-ray single-crystal diffraction in addition to routine physicochemical techniques. Density functional theory calculations have been performed to understand the nature of the electronic spectra of the complexes. Complexes 1?C3 when reacted with 4-nitrophenyl phosphate in 50:50 acetonitrile?Cwater medium promote the cleavage of the O?CP bond to form p-nitrophenol and smoothly convert 3,5-di-tert-butylcatechol (3,5-DTBC) to 3,5-di-tert-butylquinone (3,5-DTBQ) either in MeOH or in MeCN medium. Phosphatase- and catecholase-like activities were monitored by UV?Cvis spectrophotometry and the Michaelis?CMenten equation was applied to rationalize all the kinetic parameters. Upon treatment with urea, complexes 1 and 2 give rise to [Ni₂(L¹)(NCS)₂(NCO)(H₂O)₂] (1??) and [Ni₂(L²)(CH₃COO)(NCO)(NCS)(H₂O)] (2??) derivatives, respectively, whereas 3 remains unaltered under same reaction conditions.     

Co(III) complexes of Me-salpn and Me-salbn and the ring size effect on the coordination modes and electrochemical properties: The crystal structures of trans-[Co(Me-salpn)(py)2]PF6 and cis-α-[Co(Me-salbn)(4-Mepy)2]BPh4 · 4-Mepy

The synthesis and characterization of a series of cobalt(III) complexes of the general type [Co(N₂O₂)(L₂)]⁺ are described. The N₂O₂ Schiff base ligands used are Me-salpn (H₂Me-salpn = N,N′-bis(methylsalicylidene)-1,3-propylenediamine) (1–3) and Me-salbn (H₂Me-salbn = N,N′-bis(methylsalicylidene)-1,4-butylenediamine) (4–5). The two ancillary ligands L include: pyridine (py) 1, 3-metheylpyridine (3-Mepy) 2, 1-methylimidazole (1-MeIm) 3, 4-methylpyridine (4-Mepy) 4 and pyridine (py) 5. These complexes have been characterized by elemental analyses, IR, UV–Vis, and ¹H NMR spectroscopy. The crystal structures of trans-[Co^III(Me-salpn)(py)₂]PF₆, 1, and cis-α-[Co^III(Me-salbn)(4-Mepy)₂]BPh₄ · 4-Mepy, 4, have been determined by X-ray diffraction. Examination of the solution and crystalline structures revealed that the outer coordination sphere of the complexes exerts a noticeable influence on the inner coordination sphere of the Co(III) ion. The electrochemical reduction of these complexes at a glassy carbon electrode in acetonitrile solution indicates that the first reduction process corresponding to Co^III–Co^II is electrochemically irreversible, which is accompanied by the dissociation of the axial (R-py)–cobalt bonds. It has also been observed that the Co(III) state is stabilized with increasing the flexibility of the ligand environment.     

C-H activation in bithiazole ring with thallium(III) ion

Two novel organometallic complex of 2,2′-dimethyl-4,4′-bithiazole (dm4bt) ligand (L) with formula [Tl(dm4bt)₂(NO₃)(H₂O)] (1) and [Tl(dm4bt)₂(NO₃)(DMSO)] (2) have been synthesized and structurally characterized by elemental analysis, FT-IR, ¹H NMR spectra and X-ray crystallography. These complexes also display the first transoid conformation in bithiazole ligands in which C-H bond activation in bithiazole ring is observed with Tl(III) ion.     

Coordination chemistry of di-2-pyridylketone. Synthesis, spectroscopic investigations, X-ray studies and DFT calculations of Re(III) and Re(V) complexes

The paper presents a combined experimental and computational study of Re(III) and Re(V) complexes containing di-2-pyridylketone and its gem-diol form – [ReCl₃(dpk-N,O)(PPh₃)] (1), [ReCl₃(dpk-N,N′)(OPPh₃)] (2) and [ReOBr₃(dpk-OH)]·2(dpkH⁺Br⁻) (3). All the complexes have been characterized spectroscopically and structurally (by single-crystal X-ray diffraction). The complex 2 has been additionally studied by magnetic measurement. The magnetic behavior of 2 is characteristic of mononuclear octahedral Re(III) complex with d⁴ low-spin (³T_1g ground state) and arise because of the large spin–orbit coupling (ζ = 2500 cm⁻¹), which gives diamagnetic ground state. DFT and time-dependent (TD)DFT calculations have been carried out for [ReCl₃(dpk-N,N′)(OPPh₃)] and [ReOBr₃(dpk-OH), and their UV–vis spectra have been discussed on this basis.     

Syntheses, structures and properties of novel lanthanide complexes with 5-(1H-imidazol-4-yl)methylaminoisophthalic acid

Reactions of ligand 5-(1H-imidazol-4-yl)methylaminoisophthalic acid (H₃L) with varied lanthanide metal salts led to the formation of five scalelike 2D layered complexes {[Ln(H₂L)(HL)(H₂O)₂]·H₂O}_n [Ln(III) = Pr(III) (1), Nd(III) (2), Sm(III) (3), Gd(III) (4), Tb(III) (5)]. The single crystal X-ray diffraction analyses revealed that five complexes crystallized in the same monoclinic space group C2/c are isomorphous and isostructural, and the 2D networks are further connected by hydrogen bonds and π–π interactions resulting in formation of 3D structures. Investigations on the visible luminescent property of the complexes demonstrate that compounds 3 and 5 show characteristic emissions of Sm(III) and Tb(III) in the solid state at room temperature, respectively.     

Conformational study of lanthanide(III) complexes of N-(2-salicylaldiminatobenzyl)-1-aza-18-crown-6 by using X-ray and ab initio methods

A structural study of lanthanide complexes with the deprotonated form of the monobracchial lariat ether N-2-salicylaldiminatobenzyl-aza-18-crown-6 (L⁴) (Ln = La(III)–Tb(III)) is presented. Attempts to isolate complexes of the heaviest members of the lanthanide series were unsuccessful. The X-ray crystal structures of [Pr(L⁴)(H₂O)](ClO₄)₂ · H₂O · C₃H₈O and [Sm(L⁴)(H₂O)](ClO₄)₂ · C₃H₈O show the metal ion being bound to the eight donor atoms of the ligand backbone. Coordination number nine is completed by the oxygen atom of an inner-sphere water molecule. Two different conformations of the crown moiety (labelled as A and B) are observed in the solid state structure of the Pr(III) complex, while for the Sm(III) complex only conformation A is observed. The complexes were also characterized by means of theoretical calculations performed in vacuo at the HF level, by using the 3-21G^∗ basis set for the ligand atoms and a 46 + 4fⁿ effective core potential for lanthanides. The optimized geometries of the Pr(III) and Sm(III) complexes show an excellent agreement with the experimental structures obtained from X-ray diffraction studies. The calculated relative energies of the A and B conformations for the different [Ln(L⁴)(H₂O)]²⁺ complexes (Ln = La, Pr, Sm, Ho or Lu) indicate a progressive stabilization of the A conformation with respect to the B one upon decreasing the ionic radius of the Ln(III) ion. For the [Ln(L⁴)(H₂O)]²⁺ systems, most of the calculated bond distances between the metal ion and the coordinated donor atoms decrease along the lanthanide series, as usually observed for Ln(III) complexes. However, our ab initio calculations provide geometries in which the Ln–O(5) bond distance [O(5) is an oxygen atom of the crown moiety] increases across the lanthanide series from Sm(III) to Lu(III).     

Dioxomolybdenum(VI) complexes of hydrazone phenolate ligands - syntheses and activities in catalytic oxidation reactions

The new cis-dioxomolybdenum (VI) complexes [MoO₂(L²)(H₂O)] (2) and [MoO₂(L³)(H₂O)] (3) containing the tridentate hydrazone-based ligands (H₂L² = N'-(3,5-di-tert-butyl-2-hydroxybenzylidene)-4-methylbenzohydrazide and H₂L³ = N'-(2-hydroxybenzylidene)-2-(hydroxyimino)propanehydrazide) have been synthesized and characterized via IR, ¹H and ¹³C NMR spectroscopy, mass spectrometry, and single crystal X-ray diffraction analysis. The catalytic activities of complexes 2 and 3, and the analogous known complex [MoO₂(L¹)(H₂O)] (1) (H₂L¹ = N'-(2-hydroxybenzylidene)-4-methylbenzohydrazide) have been evaluated for various oxidation reactions, viz. oxygen atom transfer from dimethyl sulfoxide to triphenylphosphine, sulfoxidation of methyl-p-tolylsulfide or epoxidation of different alkenes using tert-butyl hydroperoxide as terminal oxidant. The catalytic activities were found to be comparable for all three complexes, but complexes 1 and 3 showed better catalytic performances than complex 2, which contains a more sterically demanding ligand than the other two complexes.     

Lanthanide complexes of ethylenediaminotetramethylene-phosphonic acid

Ethylenediaminotetramethylenephosphonic acid (EDTMP, H₈L) was prepared and its complexes with some lanthanide ions (La, Eu, Gd and Sm) were isolated under various conditions. IR spectra and thermal stabilities of EDTMP and its complexes were studied. The experimental conditions of the preparation influence to the composition of the complexes were shown. In alkaline solution (pH=8) deprotonated (P(O)(O^–)₂), and in acidic solution (pH=3–4) deprotonated and partly protonated (P(O)(O^–)(OH)) and non-protonated (P(O)(OH)₂) phosphonic groups are present in the complexes. All the complexes contain coordinated water molecules. The complexes containing a protonated phosphonic group contain coordinated and hydrogen-bonded water molecules.This revised version was published online in November 2005 with corrections to the Cover Date.     

η-Alkynyl and vinylidene transition metal complexes: 10. Reaction of the metal-acetylide [(η-C5H5)(CO)(NO)W---CC---C(CH3)3]Li with 1,2-diiodoethane as electrophile and with various nucleophiles

Treatment of the η¹-acetylide complex [(η⁵-C₅H₅)(CO)(NO)W---CC---C(CH₃)₃]Li (4) with 1,2-diiodoethane in THF at −78 °C, followed by the addition of Li---CC---R [R=C(CH₃)₃, C₆H₅, Si(CH₃)₃, 6a–6c] or n-C₄H₉Li and protonation with H₂O, afforded the corresponding oxametallacyclopentadienyl complexes (η⁵-C₅H₅)W(I)(NO)[η²-O=C(CC---R)CH=CC(CH₃)₃] (7a–7c), 8c and (η⁵-C₅H₅)W(I)(NO)[η²-O=C(n-C₄H₉)CH=CC(CH₃)₃] (9). The formation of these metallafuran derivatives is rationalized by the electrophilic attack of 1,2-diiodoethane onto the metal center of 4 to form first the neutral complex [(η⁵-C₅H₅)(I)(CO)(NO)W---CC---C(CH₃)₃] (5). Subsequent nucleophilic addition of Li---CC---R 6a–6c or n-C₄H₉Li and a reductive elimination step followed by protonation leads to the products 7a–7c and 9. One reaction intermediate could be trapped with CF₃SO₃CH₃ and characterized by a crystal structure analysis. The identity of another intermediate was established by infrared spectroscopic data. The oxametallacyclopentadienyl complex 10 forms in the presence of excess 1,2-diiodoethane through an alternative pathway and crystallizes as a clathrate containing iodine.     

The Cu(II) complexes with bis(pyrazole-1-yl)methane and its derivatives: Synthesis,crystal structure,and magnetic properties

The procedures for the synthesis of the Cu(II) complexes with bis(pyrazole-1-yl)methane (L¹), bis(3,5-dimethyl-4-bromopyrazole-1-yl)methane (L²), and bis(3,5-dimethyl-4-iodopyrazole-1-yl)methane (L³) of the composition Cu₂(L¹)₂Br₄ (I), Cu₂(L²)₂Cl₄ (II), Cu(L³)(NO₃)₂ (III), and Cu(L³)(H₂O)(NO₃)₂ · 2H₂O (IV) were developed. The organic ligands in the above complexes are coordinated to Cu(II) in a bidentate cyclic type through the N(2), N(2′) atoms of the pyrazole rings. The molecular and crystal structures of L², L³, II, III, and IV were determined by X-ray diffraction. The study of the μ_eff(T) function in a temperature interval 2–300 K showed that compound I, which exhibited ferromagnetic exchange interactions in the chains, undergoes transition to antiferromagnetic state with weak ferromagnetism. The exchange antiferromagnetic interactions predominate in compound II.     

Some new DTPA-N,N″-bis(amides) functionalized by alkyl carboxylates: Synthesis,complexation and stability properties

A new series of DTPA-N,N″-bis(amide) ligands functionalized by alkyl carboxylates on the amide side-arms (1a–1l) and their Gd(III) complexes of the type [Gd(1)(H₂O)] · xH₂O (2a–2l) were synthesized and characterized by analytical and spectroscopic techniques. Potentiality of 2a–2l as contrast agent for magnetic resonance imaging (MRI CA) was investigated by measuring some relevant physicochemical properties such as (i) the protonation constants of 1a–1l, (ii) thermodynamic and conditional stability constants of 2a–2l, (iii) the selectivity (pGd) of 1a–1l for the Gd(III) ion over the endogenous metal ions such as Zn(II), Ca(II), and Cu(II), and (iv) the relaxivities (R₁ and R₂) of 2a–2l in aqueous and aqueous HP-β-CD solutions. Comparative studies reveal that most of new Gd(III) complexes show enhanced thermodynamic stability and selectivity as compared with those of [Gd(DTPA-BMA)(H₂O)] (DTPA-BMA = N,N″-di(methylcarbamoylmethyl)diethylenetriamine-N,N′,N″-triacetate). Also enhanced with 1a–1l (except 1f and 1h) is affinity for Gd(III) as compared with [DTPA-BMA]³⁻ under physiological conditions. The relaxivities (R₁ and R₂) of aqueous solutions of 2a–2l, on the other hand, drop significantly as compared with [Gd(DTPA-BMA)(H₂O)] although they increase dramatically (6–10 fold) in aqueous hydroxypropyl-β-cyclodextrin (HP-β-CD) solutions.     

Four divalent transition metal carboxyarylphosphonate compounds: Hydrothermal synthesis, structural chemistry and generalized 2D FTIR correlation spectroscopy studies

Four divalent transition metal carboxyarylphosphonates, [Ni(4,4′-bipy)H₂L¹(HL¹)₂(H₂O)₂]·2H₂O 1, [Ni₂(4,4′-bipy)(L²)(OH)(H₂O)₂]·3H₂O 2, Mn(phen)₂(H₂L¹)₂3 and Mn(phen)(HL²) 4 (H₃L¹=p-H₂O₃PCH₂-C₆H₄-COOH, H₃L²=m-H₂O₃PCH₂-C₆H₄-COOH, 4,4′-bipy=4,4′-bipyridine, phen=1,10-phenanthroline) were synthesized under hydrothermal conditions. 1 features 1D linear chains built from Ni(II) ions bridging 4,4′-bipy. In 2, neighboring Ni₄ cluster units are connected by pairs of H₃L² ligands to form 1D double-crankshaft chains, which are interconnected by pairs of 4,4′-bipy into 2D sheets. 3 exhibits 2D supramolecular layers via the R₂²(8) ringed hydrogen bonding units. 4 has 1D ladderlike chains, in which the 4-membered rings are cross-linked by the organic moieties of the H₃L² ligands. Additionally, 2D FTIR correlation analysis is applied with thermal and magnetic perturbation to clarify the structural changes of functional groups from H₃L¹ and H₃L² ligands in the compounds more efficiently.     

Syntheses,structures and electrochemistry of manganese(III) complexes derived from N,N′-o-phenylenebis(3-ethoxysalicylaldimine): Efficient catalyst for styrene epoxidation

Syntheses, characterizations, electrochemistry and catalytic properties for styrene epoxidation of three manganese(III) compounds [Mn^IIIL¹(H₂O)(MeOH)](ClO₄) (1) [Mn^IIIL¹(N₃)(H₂O)]·dmf (2) [Mn^IIIL¹(Cl)(H₂O)] (3) derived from the Schiff base compartmental ligand N,N′-o-phenylenebis(3-ethoxysalicylaldimine) (H₂L¹) are reported. The three compounds are characterized by elemental analyses, IR, mass and UV–Vis spectra and conductance values. Single crystal X-ray structures of 1 and 2 have been determined. The structures of 1 and 2 show that these are mononuclear compounds having a salen type structure. In both structures, a dinuclear species is formed by bifurcated hydrogen bonding involving coordinated water molecule. The coordination of chloride in 3 is shown by conductance measurements. The compounds have also been characterized by UV–Vis and mass spectroscopic studies. Cyclic voltammetric and square wave voltammetric studies of the three compounds reveal that these undergo Mn(III)/Mn(II) reduction reversibly with the order of the ease of reduction as 3 > 2 > 1. This order has been explained proposing the composition of active species in solution. Catalytic properties for epoxidation of styrene by all the three complexes using PhIO and NaOCl as oxidant have been studied. The order of both the styrene conversion and styrene epoxidation using the three title compounds is 3 > 1 > 2. Again, it has been observed that more efficient conversion and epoxidation take place when PhIO is used as oxidant.     

Olefin epoxidation catalyzed by [Ru(TDL)(tmeda)H2O] complexes (TDL = tridentate Schiff-base ligand; tmeda = tetramethylethylenediamine)

Mixed-chelate complexes of ruthenium have been synthesized using tridentate Schiff-base ligands (TDLs) derived from condensation of 2-aminophenol or 2-aminobenzoic acid with aldehydes (salicyldehyde, 2-pyridinecarboxaldehyde), and tmeda (tetramethylethylenediamine). [Ru^III(hpsd)(tmeda)(H₂O)]⁺ (1), [Ru^III(hppc)(tmeda)(H₂O)]²⁺ (2), [Ru^III(cpsd)(tmeda)(H₂O)]⁺ (3) and [Ru^III(cppc)(tmeda)(H₂O)]²⁺ (4) complexes (where hpsd²⁻ = N-(hydroxyphenyl)salicylaldiminato); hppc⁻ = N-(2-hydroxyphenylpyridine-2-carboxaldiminato); cpsd²⁻ = (N-(2-carboxyphenyl)salicylaldiminato); cppc⁻ = N-2-carboxyphenylpyridine-2-carboxaldiminato) were characterized by microanalysis, spectral (IR and UV–vis), conductance, magnetic moment and electrochemical studies. Complexes 1–4 catalyzed the epoxidation of cyclohexene, styrene, 4-chlorostyrene, 4-methylstyrene, 4-methoxystyrene, 4-nitrostyrene, cis- and trans-stilbenes effectively at ambient temperature using tert-butylhydroperoxide (t-BuOOH) as terminal oxidant. On the basis of Hammett correlation (log k_rel vs. σ⁺) and product analysis, a mechanism involving intermediacy of a [Ru–O–OBu^t] radicaloid species is proposed for the catalytic epoxidation process.     

Physicochemical Characterization of Four Gadolinium(III) DTPA‐like Complexes

The analysis of ¹⁷O NMR transverse relaxation rates and EPR transverse electronic relaxation rates for aqueous solutions of the four DTPA‐like (DTPA = diethylenetriamine‐N,N,N′,N″,N″‐pentaacetic acid) complexes, [Gd(DTPA‐PY)(H₂O)]^? (DTPA‐PY = N′‐(2‐pyridylmethyl)), [Gd(DTPA‐HP)(H₂O)₂]^? (DTPA‐HP = N′‐(2‐hydroxypropyl)), [Gd(DTPA‐H1P)(H₂O)₂]^? (DTPA‐H1P = N′‐(2‐hydroxy‐1‐phenylethyl)) and [Gd(DTPA‐H2P)(H₂O)₂] (DTPA‐H2P = N′‐(2‐hydroxy‐2‐phenylethyl)), at various temperatures allows us to understand the water exchange dynamics of these four complexes. The water‐exchange lifetime (τM) parameters for [Gd(DTPA‐PY)(H₂O)]^?, [Gd(DTPA‐HP)(H₂O)₂]^?, [Gd(DTPA‐H1P)(H₂O)₂]^? and [Gd(DTPA‐H2P)(H₂O)₂] are of 585, 98, 163, and 69 ns, respectively. Compared with [Gd(DTPA)(H₂O)]^2? (τM = 303 ns), the τM value of [Gd(DTPA‐PY)(H₂O)]^? is slightly higher, but the other three complexes values are significantly lower than those of [Gd(DTPA)(H₂O)]^2?. This difference is explained by the fact that the gadolinium(III) complexes of DTPA‐HP, DTPA‐H1P, and DTPA‐H2P have two inner‐sphere waters. The ²H longitudinal relaxation rates of the labeled diamagnetic lanthanum complex allow the calculation of its rotational correlation time (τR). The τR values calculated for DTPA‐PY, DTPA‐HP, DTPA‐H1P, and DTPA‐H2P are of 127, 110, 142 and 147 ps, respectively. These four values are higher than the value of [La(DTPA)]^2? (τR = 103 ps), because the rotational correlation time is related to the magnitude of its molecular weight.     

Dinuclear double-helical cobalt complexes with two-armed terdentate ligands: Synthesis,structure and physical properties

Three ligands with flexible bis-terdentate coordination sites, di(2-pyridylcarbaldehyde)-6,6′-dicarboxylic acid hydrazone-2,2′-bipyridine (H₂L¹), di(2-acetylpyridyl)-6,6′-dicarboxylic acid hydrazone-2,2′-bipyridine (H₂L²) and di(2-pyridylketone)-6,6′-dicarboxylic acid hydrazone-2,2′-bipyridine (H₂L³) have been easily prepared. Dinuclear double-stranded helicates Co₂(L¹)₂(ClO₄)₂(C₂H₅OH)₂(H₂O)₂ (1), Co₂(HL²)(L²)(ClO₄)₃(C₂H₅OH)₂(H₂O)₂ (2) and Co₂(HL³)(L³)(ClO₄)₃(H₂O)₄ (3) based on the ligands, H₂L^1–3, respectively, have been obtained via self-assembly, their structures were determined by FT-IR, Elemental Analysis, ESI-MS and X-ray diffraction method.     

Structural and energetic aspects of hydrogen bonding and proton transfer to ReH2(CO)(NO)(PR3)2 and ReHCl(CO)(NO)(PMe3)2 by IR and X-ray studies

The interaction of rhenium hydrides ReHX(CO)(NO)(PR₃)₂ 1 (X=H, R=Me (a), Et (b), iPr (c); X=Cl, R=Me (d)) with a series of proton donors (indole, phenols, fluorinated alcohols, trifluoroacetic acid) was studied by variable temperature IR spectroscopy. The conditions governing the hydrogen bonding ReHHX in solution and in the solid state (IR, X-ray) were elucidated. Spectroscopic and thermodynamic characteristics (−ΔH=2.3–6.1 kcal mol⁻¹) of these hydrogen bonded complexes were obtained. IR spectral evidence that hydrogen bonding with hydride atom precedes proton transfer and the dihydrogen complex formation was found. Hydrogen bonded complex of ReH₂(CO)(NO)(PMe₃)₂ with indole (2a–indole) and organyloxy-complex ReH(OC₆H₄NO₂)(CO)(NO)(PMe₃)₂ (5a) were characterized by single-crystal X-ray diffraction. A short NHHRe (1.79(5) Å) distance was found in the 2a–indole complex, where the indole molecule lies in the plane of the Re(NO)(CO) fragment (with dihedral angle between the planes 0.01°).