Coprecipitation as a means for the determination of zirconium traces by isotope dilution analysis in the presence of substoichiometric amounts of complexones

The possibility of using coprecipitation on Cu(OH)₂·nH₂O and Fe₂O₃·nH₂O precipitates to separate a part of zirconium unreacted with complexone in the presence of a 100-fold amount of impurities has been examined. The reaction between ethylenedia-minetetraacetic acid (EDTA) and zirconium 10⁻³−10⁻⁵ M has been used as substoichiometric reaction. A zirconium determination in the concentration range of 10⁻⁴−10⁻⁶ g/ml in artificial mixtures and steel samples has been developed using the systems of EDTA-Zr−Cu(OH)₂·nH₂O and EDTA−Zr−Fe₂O₃·nH₂O.     

Über das Auftreten von Selenantrisulfandisulfonaten im Verlauf der Reduktion von Selenit mit Thiosulfat

Selenite reacts with S₂O ₃ ²⁻ forming SeS₄O ₆ ²⁻ and S₄O ₆ ²⁻ . When the stoichiometric ratio (1∶4) is changed, secondary reactions take place and precipitation, of selenium is observed. Excessive S₂O ₃ ²⁻ reacts with SeS₄O ₆ ²⁻ in neutral solutions forming SeSSO ₃ ²⁻ , which decomposes to Se. In acidic solutions this reaction has a minor importance and causes a small Se-precipitation. The main product gives a build-up reaction, forming SeS₅O ₆ ²⁻ . Excessive SeO ₃ ²⁻ also gives SeSSO ₃ ²⁻ and SeS₅O ₆ ²⁻ . SeSSO ₃ ²⁻ is decomposed by sulfite, forming SeSO ₃ ²⁻ and S₂O ₃ ²⁻ . Thiosulfate reduces SeO ₃ ²⁻ to SeS₄O ₆ ²⁻ . SeSO ₃ ²⁻ gives, a build-up reaction with SeS₅O ₆ ²⁻ , forming Se₂S₅O ₆ ²⁻ and Se₃S₅O ₆ ²⁻ . Decomposition of Se₃S₅O ₆ ²⁻ causes precipitation of a S/Se-mixture. SeSSO ₃ ²⁻ , SeS₅O ₆ ²⁻ , Se₂S₅O ₆ ²⁻ and Se₃S₅O ₆ ²⁻ have been detected for the first time.      

Radiohochspannungsionophoretische Untersuchung der Hydrolyse von Trithionat und Tetrathionat

Outer and inner³⁵S-labelled S₃O ₆ ²⁻ and S₄O ₆ ²⁻ are prepared and then hydrolyzed at different temperatures. The separation of the reaction mixture is made by high-voltage paper ionophoresis. The amount of activity is determined directly on the paper by liquid scintillation. The ratios of activity of the reaction products are compared with those calculated on the basis of three different reaction mechanisms. All experimental results agree very well with the authors' proposed reaction mechanism via the unsymmetrical intermediate⁻O₃S−SOH. The influence of the isotope exchange between S₂O ₃ ²⁻ and SO ₃ ²⁻ on the ratio of activity is examined at different temperatures. Attempts have been made also to capture the SO ₃ ²⁻ which orginates from the first step of the S₄O ₆ ²⁻ decomposition.      

Über das Auftreten Höherer Selenanmonosulfandisulfonate im Verlauf der Reduktion von Selenit mit SeS3O 6 2−

Selenite reacts with SeS₃O ₆ ²⁻ in acidic solutions forming selenanmonosulfandisulfonates with up to 6 Se-atoms in the chain. Se₅S₃O ₆ ²⁻ and Se₆S₃O ₆ ²⁻ have been detected for the first time. The decomposition causes precipitation of a sulfur/selenium-mixture. For the Se-precipitation giving reactions of SeO ₃ ²⁻ with sulfite, S₂O ₃ ²⁻ , SeSO ₃ ²⁻ , SeS₂O ₆ ²⁻ and SeS₃O ₆ ²⁻ a universal reaction scheme has been developed, prevailing of the following single steps: formation of monoselenandisulfonates, formation of build-up reagents, formation of higher selenopolythionates, decomposition of the selenopolythionates with the longest chains.      

Kinetics and mechanism of the ligand substitution reaction between aquapentacyanoruthenate(II) and 4-cyanopyridine in the presence of anionic surfactant micelles

The kinetics of ligand substitution between aquapentacyanoruthenate(II) ion, [Ru(CN)₅H₂O]³⁻ and 4-cyanopyridine (4-CNpy) has been investigated spectrophotometrically in the presence of anionic surfactant micelle, namely sodium dodecylsulphate (SDS) at 400 nm (λ_max of the intense yellow product [Ru(CN)₅4-CNpy]³⁻) under pseudo-first-order conditions using at least 10% excess of 4-CNpy over [Ru(CN)₅H₂O]³⁻. The reaction was studied as a function of [Ru(CN)₅H₂O³⁻], [4-CNpy], [SDS], pH, ionic strength and temperature, by varying each of these variables one at a time. The reaction exhibited overall second-order kinetics, being first order each in [4-CNpy] and [Ru(CN)₅H₂O³⁻] over a wide concentration range. Variation of ionic strength of the medium had a significant negative effect on the rate. The SDS micelle, being negatively charged, does not reveal any regular effect except at or near its critical micelle concentration (c.m.c). The rate of reaction was measured at different temperatures, and the activation parameters were computed using Arrhenius and Eyring plots. A plausible mechanism consistent with the experimental results has been proposed.     

Precise Conductance Measurements on Dilute Aqueous Solutions of Sodium and Potassium Hydrogenphosphate and Dihydrogenphosphate

Precise conductance measurements are reported on dilute aqueous solutions of the sodium and potassium salts of orthophosphoric acid at 25 ^∘C. Conductance measurements on solutions of electrolytes such as these phosphate salts that exist in solution as complicated mixtures of ions have previously proved difficult to interpret. To overcome this, a mathematical method has been developed to calculate the concentrations of all the species in the aqueous system M₃PO₄/M₂HPO₄/M₂HPO₄/H₃PO₄ (M = Na or K) over a continuous range of stoichiometries. The Lee–Wheaton conductance equation has been used to interpret the conductance of these multicomponent solutions in terms of the limiting ionic conductances and concentrations of all the ions in the solution. The limiting molar conductances of the ions H₂PO₄ ⁻ and HPO₄ ²⁻ and the ion-pair formation constants of these ions with sodium and potassium ions were determine This work has enabled the accurate determination of solution parameters for the important hydrogenphosphate ions in water and provides an excellent example of the use of an advanced conductance theory in the analysis of the conductance of multicomponent electrolyte systems.     

Mechanistic and kinetic study on the ozonolysis of ethyl vinyl ether and propyl vinyl ether

The reaction mechanisms for ozonolysis of ethyl vinyl ether (EVE) and propyl vinyl ether (PVE) have been investigated using the density functional theory (DFT) and ab initio method. Cycloaddition reactions of O₃ to EVE and PVE are highly exothermic by 52.91 and 53.17 kcal/mol, respectively. Major products (formaldehyde, ethyl formate, and propyl formate) resulting from the both reactions are identified by comparing them with the experimental results. Further reactions of the most energy-rich Criegee intermediates (C₂H₅OCHOO and C₃H₇OCHOO) have been proposed in the presence of NO and H₂O in which the main products are ethyl formate and propyl formate. The Multichannel Rice–Ramsperger–Kassel–Marcus (RRKM) approach is employed to calculate the total and individual rate constants for major product channels over a wide range of temperatures and different pressures. In the temperature range of 200–2500 K, the main path is the production of ethyl formate with k _EVE+O3 = 4.67 × 10⁻¹² exp(−3029/T), for the EVE with O₃ reaction and k _PVE+O3 = 3.58 × 10⁻¹² exp(−2858/T) for the PVE with O₃ reaction. At 298 K and 760 torr, the rate constants calculated are 1.80 × 10⁻¹⁶ and 2.45 × 10⁻¹⁶ cm³ molecule⁻¹ s⁻¹ for ozonolysis of EVE and PVE, which are consistent with the experimental results. The total rate constants show positive temperature dependence over the temperature range of 200–2000 K but pressure independence in the range of 0.01–10000 Torr. Estimation of branching ratios of several products is also performed. The influence of carbon chain length on reactivity toward ozone is examined.     

Studies on electron transfer reactions: oxidation of phenol and ring-substituted phenols by heteropoly 11-tungstophosphovanadate(V) in aqueous acidic medium

The kinetics of oxidation of phenol and a few ring-substituted phenols by heteropoly 11-tungstophosphovanadate(V), [PV^VW₁₁O₄₀]⁴⁻ (HPA) have been studied spectrophotometrically in aqueous acidic medium containing perchloric acid and also in acetate buffers of several pH values at 25 °C. EPR and optical studies show that HPA is reduced to the one-electron reduced heteropoly blue (HPB) [PV^IVW₁₁O₄₀]⁵⁻. In acetate buffers, the build up and decay of the intermediate biphenoquinone show the generation of phenoxyl radical (ArO^·) in the rate-determining step. At constant pH, the reaction shows simple second-order kinetics with first-order dependence of rate on both [ArOH] and [HPA]. At constant [ArOH], the rate of the reaction increases with increase in pH. The plot of apparent second-order rate constant, k ₂, versus 1/[H⁺] is linear with finite intercept. This shows that both the undissociated phenol (ArOH) and the phenoxide ion (ArO⁻) are the reactive species. The ArO⁻–HPA reaction is the dominant pathway in acetate buffer and it proceeds through the OH⁻ ion triggered sequential proton transfer followed by electron transfer (PT-ET) mechanism. The rate constant for ArO⁻–HPA reaction, calculated using Marcus theory, agrees fairly well with the experimental value. The reactivity of substituted phenoxide ions correlates with the Hammett σ⁺ constants, and ρ value was found to be −4.8. In acidic medium, ArOH is the reactive species. Retardation of rate for the oxidation of C₆H₅OD in D₂O indicates breaking of the O–H bond in the rate-limiting step. The results of kinetic studies show that the HPA-ArOH reaction proceeds through a concerted proton-coupled electron transfer mechanism in which water acts as proton acceptor (separated-CPET).     

Determination of Tannic Acid by Flow Injection Analysis with Inhibited Chemiluminescence Detection

A novel flow injection procedure has been developed for the determination of tannic acid based on the inhibition of the chemiluminescences in luminol-H₂O₂-Manganese tetrasulfonatophthalocyanine (MnTSPc) system by tannic acid. The method is simple, rapid and sensitive with a detection limit of 8 × 10⁻¹⁰ mol·L⁻¹ and a linear range of 7 × 10⁻⁹–5 × 10⁻⁶ mol·L⁻¹. The relative standard deviation is 1.9% for eleven measurements of 5 × 10⁻⁷ mol·L⁻¹ tannic acid. The method has been successfully applied to the determination of tannic acid in real Chinese gall and hop pellets samples.     

Reaction of a naphthalene complex C10H8Yb(THF)2 with cyclopentadienyl-substituted alcohols and amines as a convenient synthetic route to the half-sandwich complexes of divalent ytterbium

The reactions of ytterbium naphthalene complex C₁₀H₈Yb(THF)₂ with 2-cyclopentadienylethanol, 1-cyclopentadienylpropan-2-ol, 3-cyclopentadienyl-1-butoxypropan-2-ol, and cyclopentadienyldimethylsilyl-tert-butylamine were studied. The bivalent ytterbium complexes with chelate bifunctional cyclopentadienyl ligands [(η⁵−C₅H₅)CH₂CH₂(η¹−O)]Yb(THF), [(η⁵−C₅H₅)CH₂CH₂(η¹−O)]Yb(DME). [(η⁵−C₅H₅)CH₂CH(Me)(η¹−O)]Yb(THF), [(η⁵−C₅H₅)CH₂CH(CH₂OC₄H₉)(η¹−O)]Yb(THF), and [(η⁵−C₅H₅)SiMe₂(η¹−N(Bu¹))]Yb(THF) were obtained and characterized. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 742–745, April, 2000.     

Synthesis and Structure of the Alkoxido-Titanium Pentamolybdate (nBu4N)3[(iPrO)TiMo5O18]: An Entry into Systematic TiMo5 Reactivity

The alkoxido-titanium pentamolybdate [(ⁱPrO)TiMo₅O₁₈]³⁻ (1) has been obtained as its tetrabutylammonium (TBA) salt by hydrolysis of a mixture containing (TBA)₂[Mo₂O₇], (TBA)₄[Mo₈O₂₆] and Ti(OⁱPr)₄ in MeCN and has been characterised by ¹H, ¹³C, ¹⁷O, ⁴⁹Ti and ⁹⁵Mo NMR and FTIR spectroscopy, electrospray ionisation mass spectrometry, elemental microanalysis and single-crystal X-ray crystallography. The Lindqvist-type structure is derived from [Mo₆O₁₉]²⁻ by replacement of {Mo=O}⁴⁺ by {(ⁱPrO)Ti}³⁺ and shows bond alternation in the TiMo₃O₄ rings, with average bond distances of 1.956(8) ? for Ti–O(Mo), 1.832(7) ? for Mo–O(Ti), 1.943(7) ? for Mo_eq–O(Mo_ax) and 1.910(6) ? for Mo_ax–O(Mo_eq), while the increase in charge results in a decrease in ¹⁷O NMR chemical shift for terminal Mo=O groups from δ 933 for [Mo₆O₁₉]²⁻ to δ 875 and 857 for 1 and a shift in ν_Mo=O from 951 cm⁻¹ for [Mo₆O₁₉]²⁻ to 930 cm⁻¹ for 1. The main peaks in the negative-ion electrospray ionisation mass spectrum of (TBA)₃ 1 could be assigned to ion aggregates containing 1 or fragments derived from 1, including {(TBA)₂[(ⁱPrO)TiMo₅O₁₈]}⁻, {(TBA)[(ⁱPrO)TiMo₅O₁₈]}²⁻, {(ⁱPrO)TiMo₂O₈}⁻, {TiMo₅O₁₈}²⁻, {TiMo₄O₁₅}²⁻ and {Mo₃O₁₀}²⁻.     

Voltammetric response and electrochemical properties of the O2/O 2 •− couple in acetone

Voltammetric responses of the O₂/O ₂ ^•− couple as a function of aprotic solvents are investigated. The results show that acetone is a suitable solvent for examining the electrode reaction of the O₂/O ₂ ^•− couple. Studying the electrochemical behavior of the O₂/O ₂ ^•− couple at different electrodes in acetone by cyclic voltammetry suggests that the reversibility of the O₂/O ₂ ^•− couple and the redox peak currents at glassy carbon are better than those at gold and platinum. The kinetic parameters (electron transfer rate constant k ₀ and cathodic transfer coefficient α) of the oxygen reduction to superoxide ion (O ₂ ^•− ) are evaluated using normal-pulse voltammetry. The obtained values of k ₀ (cm/s) and α are (1.95 ± 0.05) × 10⁻⁴ and 0.34 ± 0.01, respectively. The scavenging activities of ascorbic acid and bilirubin are tested and the experimental results confirm that ascorbic acid is a better scavenger toward O ₂ ^•− . Published in Russian in Elektrokhimiya, 2007, Vol. 43, No. 2, pp. 188–194. The text was submitted by the authors in English.     

Synthesis of O,O Ethane Bridged Bis-copper(II) Macrocycles. Selective Enzyme Model for Catecholase Activity

New mononuclear and dinuclear complexes [3-hydroxyethyl-1,3,5,8,11pentaazacyclotridecane]copper(II) (1)/nickel(II) (2) perchlorate and O,O ethane bridged bis-copper(II) (3)/nickel(II) (4) macrocycles have been synthesized and characterized by various spectroscopic techniques, viz. i.r., n.m.r., e.p.r., u.v.–vis. and conductance measurements. Spectral data and conductance measurements reveal that all the complexes are consistent with square-planar geometry and are ionic in nature. The catalytic activity of the dinuclear Cu(II) complex (3) in the presence of pyrocatechol was determined spectrometrically by monitoring the increase of the o-benzoquinone characteristic absorption band at 25,000 cm⁻¹ with respect to time in DMF saturated with molecular oxygen. The kinetic parameters V_max (2.8×10⁻³ M s⁻¹) and K_M (1.4×10⁻³ mm) have been determined by Michaelis–Menten method. Electrochemistry of the dinuclear Cu(II) complex has been studied in the presence of molecular oxygen with pyrocatechol and without pyrocatechol at a scan rate of 0.1 V s⁻¹ by cyclic voltammetry. On addition of pyrocatechol, complex shows a shift in E_pc, E_pa and E_1/2 values indicating the oxidation of substrate (pyrocatechol).     

Temperature and Concentration Dependences of the Electrical Conductance,Diffuson and Kinetic Parameters of Sodium Selenite Solutions in Ordinary and Heavy Water

On the basis of conductometric measurements, empirical equations were derived that describe the temperature and concentration dependences of the electrical conductance of Na₂SeO₃ solutions in ordinary and heavy water. The values of the equivalent conductance of the ions at infinite dilution were determined in the temperature region 12 to 45 °C, as well as the kinetic parameters for ionic motion in the solutions. These parameters were compared with respect to the solvent nature. The values of the effective ionic radii and ionic hydration numbers were obtained. The changes of Gibbs energy, entropy and enthalpy for the transition of ions from one quasi-equilibrium state to another were calculated at different temperatures. According to the terms of Samoylov’s theory, Na⁺ and SeO₃²⁻ ions in H₂O and D₂O were shown to be positively hydrated and stabilize the solvent structure, with this effect being more pronounced in D₂O and increasing slightly with increasing temperature.     

Dye-coated stationary-phases: A retention model for anions in ion-interaction chromatography

Summary The separation of inorganic anions (NO₃ ⁻, NO₂ ⁻, Cl⁻, Br⁻, I⁻, SO₄ ²⁻, S₂O₃ ²⁻) by ion-interaction chromatography mediated with a specific dye has been investigated. Chromatography was performed on a LiChrospher RP-18 colum dynamically coated with crystal violet, using acetonitrile-water buffered with phthalate as the mobile phase. The presence of the dye in the eluent enabled indirect spectrophotometric detection of the analytes, which have no significant UV absorption. Retention data were collected for the different anions by varying the composition of the mobile phase according to a full factorial experimental design. A theoretical model for the retention of singly- and doubly-charged analytes, on the basis of the two main processes of ion-exchange and ion-pair formation, has been proposed and validated with the experimental data.     

Rubidium-cationic conductance in the systems Rb2 ? 2xAl2 ? xAxO4 (A = P, V)

RbAlO₂-based solid solutions are synthesized in the systems Rb_{2 − x} Al_{2 − x} A _x O₄ (A = P, V). Temperature and concentration dependences of their conductance are studied; the rubidium-cationic character of the conductance is corroborated. The high ionic conductivity of the synthesized phases (∼5 × 10⁻³ S cm⁻¹ at 300°C, ∼2 × 10⁻² S cm⁻¹ at 700°C) is caused by (a) formation of rubidium vacancies as a result of the replacing of Al³⁺ ions by fivefold-charged cations of phosphorus or vanadium and (b) disordered crystal structure of γ-KAlO₂ type. The obtained data are compared with the results of the studying of similar systems. Original Russian Text ? G.Sh. Shekhtman, E.I. Volegova, E.I. Burmakin, 2009, published in Elektrokhimiya, 2009, Vol. 45, No. 4, pp. 495–499.     

Theoretical study of the C3S molecule

For the most stable linear isomer of C₃S in its X¹Σ⁺ state a six-dimensional potential energy surface (PES) has been calculated ab initio by coupled cluster – connected triples (CCSD(T)) method. The analytic form of the PES has been transformed in a quartic force field in dimensionless normal coordinates and employed in calculations of spectroscopic constants using second-order perturbation theory. The PES and the full kinetic energy operator in internal coordinates have been used to calculate variationally the anharmonic ro-vibrational energies for J=0 and J=1. The two experimental band origins of C₃S observed in the gas phase, ν₁ and ν₁+ν₅−ν₅, agree very well with the theoretical values. The anharmonic ro-vibrational levels, including the bending modes up to 2200 cm⁻¹, are reported. The singlet ground state PES has a saddle point at about 1.25 eV above the linear minimum and two other higher lying cyclic local minima. The only dipole- and spin-allowed electronic transition between 0 and 5 eV is calculated to be the ¹Π−X¹Σ⁺ transition with a vertical transition energy of 353.2 nm in good agreement with the matrix value of 378 nm. The dissociative paths C + C₂S, C₂ + CS and C₃ + S of low lying singlet and triplet states have been investigated. Electronic Supplementary Material: Supplementary material is available in the online version of this article at dx.doi.org/10.1007/s00214-005-0683-7 Dedicated to Professor H. Stoll.     

Study of the activation of molecular oxygen in the presence of manganese(II) complexes

The electronic structures of the systems [Mn(phen)₂]²⁺ (I), Mn(HCO₃ ⁻)₂(H₂O)₃ (II), [Mn(phen)₂(H₂O)O₂]²⁺ (III) and [Mn(phen)₂O₂]²⁺ (IV) have been calculated by the IEHM method. The change in the energy barrier for the activation of O₂ (−4.59 eV (III), −4.69 eV (IV) for the elementary step has been calculated using the vibronic activation theory. The formation of an adduct of molecular oxygen with II is shown to be unlikely. Deceased. Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 33, No. 3, pp. 192–195, May–June, 1997.     

Electronic structure and reactivity of PO 43? , P2O 74? phosphate and SO 42? , S2O 72? sulfate anions

Group-theoretical analysis and molecular orbital methods were used to obtain (in analytical form) the electronic structure and reactivity of the PO ₄ ³⁻ , SO ₄ ²⁻ and P₂O ₇ ⁴⁻ , S₂O ₇ ²⁻ anions. The reactivity of the anions is dictated by the availability of lone electron pairs on the top quasidegenerate MOs in the form of linear combinations of group orbitals from atomic orbitals (AOs) of peripheral oxygen atoms for PO ₄ ³⁻ , SO ₄ ²⁻ and the central (bridging) atom for P₂O ₇ ⁴⁻ , S₂O ₇ ²⁻ . These electron pairs are responsible for the donor-acceptor interactions during complexation, clustering, and other (addition, substitution, etc.) reactions. Original Russian Text Copyright ? 2005 V. A. Zasukha, A. P. Shpak, V. V. Trachevskii, and E. V. Urubkova __________ Translated from Zhurnal Strukturnoi Khimii, Vol. 46, No. 3, pp. 405–415, May–June, 2005.     

Synthesis and structural characterization of mixed ligand complexes of nickel(II) with 1-cyano-1-carboethoxyethylene-2,2-dithiolate and some nitrogen donors

Mixed ligand complexes of Ni^II ion with 1-cyano-1-carboethoxyethylene-2,2-dithiolate (CED²⁻[S₂C = C (CN)(COOC₂H₅)]²⁻) as a primary ligand and o-phenylenediamine (OPD), pyridine (py), α-picoline (α-pic), β-picoline (β-pic) or γ-picoline (γ-pic) as secondary ligands have been isolated and characterized on the basis of analytical data, molar conductance, magnetic susceptibility, electronic and infrared spectral studies. The molar conductance data reveal that the complexes have 1:1 electrolytic nature in DMF solution. Magnetic and electronic spectral studies suggest distorted octahedral stereochemistry around Ni^II ion in its complexes. Infrared spectral studies suggest bidentate chelating behaviour of CED²⁻ ion and OPD while other ligands show unidentate behaviour in their complexes.