Formation and characterization of surfactant stabilized silver nanoparticles: a kinetic study

Kinetic data for the silver nitrate–ascorbic acid redox system in presence of three surfactants (cationic, anionic and nonionic) are reported. Conventional spectrophotometric method was used to monitor the formation of surfactant stabilized nanosize silver particles during the reduction of silver nitrate by ascorbic acid. The size of the particles was determined with the help of transmission electron microscope. It was found that formation of stable perfect transparent silver sol and size of the particles depend upon the nature of the head group of the surfactants, i.e., cetyltrimethylammonium bromide (CTAB), sodium dodecyl sulphate (SDS) and Triton X-100. The silver nanoparticles are spherical and of uniform particle size, and the average particle size is about 10 and 50 nm, respectively, for SDS and CTAB. For a certain reaction time, i.e., 30 min, the absorbance of reaction mixture first increased until it reached a maximum, then decreased with [ascorbic acid]. The reaction follows a fractional-order kinetics with respect to [ascorbic acid] in presence of CTAB. On the basis of various observations, the most plausible mechanism is proposed for the formation of silver nanoparticles.     

Controlled Growth of Gold Nanoparticles in Aerosol-OT/Sorbitan Monooleate/Isooctane Mixed Reverse Micelles

Stable anisotropic gold nanoparticles were prepared by the reduction of tetrachloroauric acid with hydrazine in mixed reverse micelles formed with anionic surfactant Aerosol-OT and nonionic surfactant sorbitan monooleate (Span80) in isooctane. It was found that the Span80 serves not only as a structure modifier but also as a stabilizer for Au particles, to prevent their further growth and precipitation. The control of particle size, shape, and degree of dispersion was achieved by varying the process variables, such as molar ratio of reduction agent to metal salt, size of water droplets (omega(o)), concentration of metal salt, and sequence of addition of metal salt into the mixed reverse micelles. When the HAuCl(4) was injected directly into the mixed reversed micelles containing hydrazine, nonspherical gold nanoparticles, such as rods and cubes, were obtained at the molar ratio of hydrazine to HAuCl(4) of less than 1.0. The nonspherical Au particles were preferably formed at larger omega(o) value and lower gold salt loading. By the analyses of high-resolution electron microscope, electron diffraction pattern, and energy-dispersive X-ray analysis (EDX), the resultant particles have been found to be pure gold of face-centered cubic structure. Copyright 2000 Academic Press.     

Effect of Aerosol-Assisted Chemical Vapor Deposition Parameters on Characteristics of the Resulting Carbon-containing Particles

Specific features of the chemical vapor deposition of carbon-containing nanoparticles from aerosols of CH₅COOH–C₃H₇NO solutions, including the effect of the main technological parameters on the size characteristics, structure, and composition of the products being formed, are described. It is shown that the shape, size, and structure of the particles being formed are determined by processes occurring both in the downstream-first evaporation zone and in the main pyrolysis zone, and the temperatures of these zones are the most important technological parameters. It was found that the concentration of benzoic acid in solution can be used as a technological parameter making it possible to gradually vary the size characteristics of the carbon particles obtained. The results of the study form a basis for development of a technology and equipment for obtaining carbon-containing nanoparticles.     

An Experimental Study on the Relationship between the Physical Properties of CTAB/Hexanol/Water Reverse Micelles and ZrO2-Y2O3 Nanoparticles Prepared

Based on the studies of their physical properties such as aqueous solution uptake, electric conductivity, and microstructure, CTAB/hexanol/water reverse micelles (CTAB, cetyltrimethyl ammonium bromide) were used to prepare ZrO2-Y2O3 nanoparticles. The relationship between the micelle microstructure and size, morphology, and aggregate properties of particles prepared was also investigated. It has been found that with high CTAB concentration ([CTAB] > 0.8 mol/l), the reverse micelles can solubilize a sufficient amount of aqueous solution with high metallic ion concentration ( approximately 1.0 mol/L), while the microstructure of the reverse micelles keeps unchanged. The most important factor affecting the size and shape of reverse micelles was found to be the water content w0 (w0, molar ratio of water to surfactant used). When both the CTAB concentration and the w0 values are low, the diameters of reverse micelles are below 20 nm, and the ZrO2-Y2O3 particles prepared are also very small. However, the powders obtained were found to form a lot of aggregates after drying and calcination. High CTAB concentration, high w0 value, and high metallic ion concentration in the aqueous phase for high powder productivity were found to be the suitable compositions of reverse micelles for preparing high-quality ZrO2-Y2O3 nanoparticles. Under these conditions, the reverse micelles are still spherical in shape even the reverse micellar system is nearly saturated with aqueous solutions. These reverse micelles were found to have a diameter of between 60 and 150 nm and the ZrO2-Y2O3 particles prepared therefrom range from 30 to 70 nm with spherical shape and not easy to form aggregates. Copyright 1999 Academic Press.     

Synthesis and Stabilization of Gold Nanoparticles in Reverse Micelles of Aerosol OT and Triton X-100

Mechanisms of the formation and stabilization of gold nanoparticles in reverse micelles of micro-emulsions based on Triton X-100 (TX-100) and Aerosol OT (AOT) are studied. The instability of AOT-based microemulsions is shown to be caused by the oxidative degradation of gold nanoparticles in micelle water pools. Methods are proposed for the stabilization of these microemulsions. It is revealed that the mean size of gold nanoparticles synthesized in TX-100 reverse micelles in the presence of sodium sulfite is markedly smaller than that of particles prepared in AOT reverse micelles. This is explained by the fact that gold clusters are formed in the micelle shell rather than in the water pool. In the shell, the clusters are stabilized by oxyethylene groups of TX-100 molecules.__________Translated from Kolloidnyi Zhurnal, Vol. 67, No. 4, 2005, pp. 534–540.Original Russian Text Copyright © 2005 by Spirin, Brichkin, Razumov.     

Copper sols stabilized by poly(ethylene glycol-600-monolaurate) and its complexes with poly(acrylic acid)

Copper sols stabilized by a polymer-colloid complex are studied via dynamic light scattering and transmission electron microscopy. It is shown that the polymer-colloid complex including poly(acrylic acid) and the nonionogenic polymeric surfactant poly(ethylene glycol-600-monolaurate) is an effective protector of copper nanoparticles formed via the reduction of Cu²⁺ ions in an aqueous medium. The sizes of sol particles of the nanocomposite consisting of the polymer-colloid complex and copper nanoparticles depend on the method of preparation of the nanocomposite. The incorporation of the copper nanoparticles being formed (an average diameter of 5 nm) into particles of the polymer-colloid complex leads to an insignificant change in the sizes of the complex particles. The same sizes are typical for particles of the nanocomposite formed during the introduction of surfactant micelles in the copper sol formed in the solution of poly(acrylic acid). The interaction of copper nanoparticles formed in an aqueous medium with surfactant micelles entails their aggregation; as a result, these nanoparticles turn out to be incorporated into large aggregates with equivalent radii of up to 100 nm. When poly(acrylic acid) is incorporated into this sol, the sizes of its particles insignificantly change apparently because of the low rate of structural rearrangements accompanying the formation of the polymer-colloid complex.     

Novel pH-responsive nanoparticles

In this work we report a new type of pH-responsive micelle-like nanoparticle. Reversible nanoscale structures are formed in solutions of a pH-sensitive hydrophobic polyelectrolyte, poly( N-methacryloyl- l-valine) or poly( N-methacryloyl- l-phenylalanine), and nonionic surfactant (Brij 98) in the presence of hydrochloric acid. The influence of composition and pH on particles size and shape was investigated by a variety of methods. An entity's size and polydispersity could be varied in a broad range making them a perspective candidate as a drug carrier. Unlike the case of typical micelles, our results indicate the presence of cavities in the formed particles. A hypothetical model of a nanoparticle and mechanism of formation are proposed.     

Lyotropic liquid crystal-assisted synthesis of micro- and nanoparticles of silver

A simple, one-step approach for the synthesis of micro- and nanoparticles of silver by employing a lyotropic liquid crystal (LLC) template is described. Anisotropic silver particles are synthesised by reducing an appropriate amount of precursor silver nitrate using a mild reducing agent ascorbic acid in presence of a hexagonal LLC medium, without the aid of any external stabilising agents. In this synthesis, precursor concentration, type of the reducing agent and LLC phase are found to significantly influence the particle size and morphology. Either a decrease in the concentration of silver nitrate or a change in the reducing agent, from ascorbic acid to sodium borohydride in the same reaction medium, yielded quasi-spherical nanoparticles. Besides, replacing the hexagonal LLC medium with a lamellar phase during the synthesis using ascorbic acid also resulted in the formation of spherical particles in nanometre scale. As a comparison, gold nanoparticle synthesis is carried out in hexagonal and lamellar LLC phases. Similar to the observations made in the silver particle synthesis, branched anisotropic particles are formed in the hexagonal phase and quasi-spherical particles are produced in the lamellar phase. A possible growth mechanism for the formation of these particles based on the phase structure of the LLC medium is discussed.     

Optical and electrical properties of inverted emulsions based on sodium bis(2-ethylhexyl) sulfosuccinate containing cadmium sulfide particles

The optical and electrical properties of inverted emulsions based on sodium bis(2-ethylhexyl) sulfosuccinate (AOT) containing nanoparticles of cadmium sulfide are studied. The particle size of the synthesized samples is determined from UV spectroscopy data. The state of solubilized water in invert emulsions is found to change in the presence of cadmium sulfide due to the formation of aqua complexes. The shape of AOT micelles and the structures formed by drying the invert AOT emulsions are shown to be affected by the degree of hydration and the solubilization of CdS particles.     

Nanometer particles synthesis in reverse micelles: Influence of the size and the surface on the reactivity

In this paprr we are presenting the synthesss “in situ” of nanoparticles in reverse micelles. In the case of aggregates containing copper ions, it is possible to form metallic particles surrounded or not by an oxide layer. By mixing aggregates containing cadmium and sulphide ions, CdS particles are formed. The size and polydispersity of the particles are controlled. The photoelectron transfer reaction depends mainly on the surface composition. In the range of 1 to 5 nm, the efficiency in the electron transfer does not depend on the size of the particle. The reverse micelles are formed by using either sodium di(2-ethyl hexyl)sulfosuccinate, usually called {AOT} or mixed bivalent and sodium di(2-ethyl hexyl)sulfosuccinate {AOl/M(AOT)₂}.     

Gold clusters and nanoparticles in reverse micelles formed by tritons X-100, X-114, and X-45

The formation of gold nanoparticles and clusters in solutions of reverse micelles formed by Tritons X-45, X-114, and X-100 (polyoxyethylene isooctylphenyl ethers with degrees of polymerization n = 5, 7–8 and 9–10, respectively) in the presence of sodium sulfite is studied. The stability of these particles is shown to depend on the length of ethylene oxide chains in surfactant molecules, water content in micelles, and the presence of special additives. It is found that, on one hand, L-ascorbic acid favors a reduction of HAuCl₄ and, on the other hand, affects the stability of resultant particles.     

Synthesis and characterization of magnetic Co nanoparticles: A comparison study of three different capping surfactants

This paper compares the performance of three long-chain acids—oleic and elaidic (both olefinic) and stearic (aliphatic)—as a capping agent in the synthesis of magnetic Co nanoparticles. The particles were formed through thermal decomposition of dicobalt octacarbonyl in toluene in the presence of the long-chain acid, and characterized by TEM, high-resolution TEM, and SQUID measurements. Infrared spectra revealed that some of the added olefinic acid was transformed from cis- to trans-configuration (for oleic acid) or from trans- to cis- (for elaidic acid) to facilitate the formation of a densely packed monolayer on the surface of Co nanoparticles. As compared to aliphatic acids, olefinic acids are advantageous for dense packing on small particles with high surface curvatures due to a bent shape of the cis-isomer. The presence of an olefinic acid is able to control particle growth, stabilize the colloidal suspension, and prevent the final product from oxidation by air. Our results indicate that oleic acid, elaidic acid, and a mixture of oleic/stearic acids or elaidic/stearic acids have roughly the same performance in serving as a capping agent for the synthesis of Co nanoparticles with a spherical shape and narrow size distribution.     

Ficus carica Latex-Mediated Synthesis of Silver Nanoparticles and Its Application as a Chemophotoprotective Agent

The present work provides scientific support on the use of latex of Ficus carica to synthesize stable silver nanoparticles (AgNPs). AgNPs synthesized immediately after the addition of latex to silver nitrate solution at room temperature. Synthesized nanoparticles were of spherical shape with average size of 163.7 nm. Fourier transform infrared spectroscopy analysis revealed capping of proteins and phenolic compound on AgNPs, while X-ray diffraction analysis confirmed the fcc nature of AgNPs. Particles formed were stable for a long time (6 months). It was found that incorporation of AgNPs with 2 and 4 % concentration exhibits synergistic increase in sun protection factor of commercial sunscreen and natural extracts ranging from 01 to 12,175 % than control. Further characterization of latex and AgNPs revealed total phenolic content of 98.75 and 94.88 μg/ml. The ferric ion reduction potentials of latex and AgNPs were 79.69 and 18.79 %. Reduction potential of ascorbic acid was synergistically increased after cumulative preparation of ascorbic acid with latex and AgNPs and found to be 106.76 and 101.50 % for ascorbic acid + latex and ascorbic acid + AgNPs, respectively.     

Shape-controlled synthesis of highly monodisperse and small size gold nanoparticles

We describe here that fine control of nanoparticle shape and size can be achieved by systematic varia-tion of experimental parameters in the seeded growth procedure in aqueous solution. Cubic and spherical gold nanoparticles are obtained respectively. In particularly, the Au cubes are highly mono-disperse in 33±2 nm diameter. The experimental methods involve the preparation of Au seed particles and the subsequent addition of an appropriate quantity of Au seed solution to the aqueous growth solutions containing desired quantities of CTAB and ascorbic acid (AA). Here, AA is a weak reducing agent and CTAB is not only a stable agent for nanoparticles but also an inductive agent for leading increase in the face of nanoparticle. Ultraviolet visible spectroscopy (UV-vis), X-ray diffraction (XRD), transmission electron microscopy (TEM) are used to characterize the nanoparticles. The results show that the different size gold nanoparticles displayed high size homogenous distribution and formed mono-membrane at the air/solid interface.     

柠檬酸辅助可控制备花状银粒子及其表面增强拉曼散射性能

以抗坏血酸为还原剂,柠檬酸为结构导向剂,一步还原硝酸银,合成了尺寸和形状可调的花状银颗粒。纳米粒子的粒径可在600～1 200 nm范围内调整,表面突起可达到10～25 nm。柠檬酸的化学性质在银纳米粒子合成多级花状银结构的过程中起着至关重要的作用。通过改变柠檬酸或抗坏血酸溶液的用量,银结构的各向异性形貌可以很容易地调节。以制备的多级花状银颗粒作为表面增强拉曼散射(SERS)基底,对浓度为10~(-10)mol·L~(-1)的罗丹明6G(R6G)仍具有较高的检测灵敏度。     

稳定分散的纳米银溶胶的制备及其表征

Stable aqueous dispersive colloidal Ag nanoparticles were prepared by reducing silver nitrate with sodium borohydride in the presence of 3-mercaptopropionic acid. The formation process of the Ag nanoparticles was investigated by UV-Visible spectroscopy and transmission electron microscopy. The results show that the spherical and rodlike particles and aggregates are formed in the initial stage of the reaction， then the rodlike particles and aggregates are gradually decomposed into small spherical particles， and the final obtained Ag nanoparticles with an average size of 8 nm are in uniform shapes and narrow size distribution， and the colloid remains stable for more than one month， which makes it convenient for use in practice. The presence of capping agent plays an extra role over nanoparticles stabilization and morphology. The presence of capping agent on the surface of Ag nanoparticle is confirmed by the X-ray photoelectron spectroscopy. It is found that Ag nanoparticles are negatively charged in alkaline condition， whereas they are positively charged in acid condition. Electrosteric effect is responsible for their long-term stability.     

Synthesis of gadolinium-based nanoparticles in a system of direct surfactant micelles and study of their magnetic properties

Synthesis method is suggested and the size and shape of Pt-Gd particles formed in reduction of metal ions in an aqueous system of direct micelles were determined in relation to the concentration of surfactants and reducing agents: hydrazine hydrate, quercetin, and rutin. The magnetic properties of the nanoparticles obtained were studied.     

Study of Formation Conditions and Characteristics of Carbon-containing Particles Produced from ortho-Xylene by Aerosol-Assisted Chemical Vapor Deposition

Some fundamental aspects of the aerosol-assisted chemical vapor deposition of carbon-containing nanoparticles from an aerosol of ortho-xylene are described, including the influence exerted by the pyrolysis temperature and flow rate of the carrier-gas on the size characteristics, structure, and composition of the products being formed. It was shown that the shape, size, and structure of particles are determined by processes occurring in the pyrolysis zone, and its temperature is the most important technological parameter, together with the residence time in the reaction zone of products formed in the decomposition of ortho-xylene. The results obtained are of practical importance and form a basis for development of technology and equipment for producing carboncontaining nanoparticles from an aerosol of ortho-xylene.

     

Colloidal self-assemblies used as templates to control size,shape and self-organization of nanoparticles

In this paper we show that the use of colloidal assemblies as templates favors the control of the size and shape of nanoparticles. As expected theoretically, the change in size and shape of copper metal nanosized particles induces changes in their optical properties. Cylindrical copper metal particles having the same size and shape can be obtained in various regions of the phase diagram when the template is made of interconnected cylinders. Self-assembly of silver metal nanoparticles is reported. Monolayers of particles organized in a hexagonal network are formed over very large domains. Small or large aggregates can also be produced, and, in these aggregates, the particles are highly organized and form pseudo-crystals with a face-centered cubic structure for various particles sizes. The optical properties of the silver nanoparticles isolated in micellar solution or self-assembled in 2D or 3D supperlattices are reported. Syntheses of magnetic fluids differing in their particle size are presented. The magnetic properties differ with the particle size.     

New copper-containing catalysts based on modified amorphous silica and their use in flow azide—alkyne cycloaddition

Сopper-containing catalysts supported on amorphous silica modified by amines were prepared using the chemical reduction method. The morphology of copper particles and their chemi calstate depend on the type of the reducing agent used. The use of ascorbic acid results in the formation of monodisperse submicron Cu⁰ particles 200—300 nm in size, whereas Cu⁰ particles with a size ranging from 50 to 150 nm are formed when hydrazine hydrate was used. The morphology and chemical state of the copper particles reduced with sodium borohydride depend substantially on the amount of the reducing agent: Cu⁰ nanoparticles 10—15 nm in size are formed if the reducing agent is an excess, layered Cu₂O plates are formed at the equimolar amount of sodium borohydride, and a decrease in the amount of sodium borohydride results in spherical Cu₂O particles. All the catalysts synthesized in the flow regime showed higher activity in the catalytic cycloaddition of azides to alkynes than the commercially available copper catalysts.