Deep desulfurization of diesel by selective oxidation using amphiphilic paradodecatungstate catalyst

An amphiphilic paradodecatungstate catalyst, [(C₁₈H₃₇)₂N(CH₃)₂]₉[NaH₂W₁₂O₄₂] was prepared and characterized by Fourier transform infrared spectroscopy, UV–visible spectrum, differential thermal analysis, and thermogravimetric analysis. The amphiphilic catalyst exhibits very high catalytic activity that dibenzothiophene (DBT) in model diesel can be oxidized into dibenzothiophene sulfones using hydrogen peroxide as an oxidant. The reactivity of sulfur compounds decreased in the order of DBT > 4,6-DMDBT > BT > 5-MBT. The reaction rates of these sulfur compounds are sensitive to the electron density on sulfur atoms and the steric hindrance of the substituted groups of sulfur compounds. The sulfur level of a commercial diesel after desulfurization can drop from 200 ppm to about 12 ppm.     

功能化含磷钼酸介孔硅材料的制备及其在深度氧化脱硫中的应用

随着全球工业的快速发展,化石燃料的消耗量日益增加,从而导致有毒污染物的排放量随之增加.燃料油中的含硫化合物燃烧后会形成SOx.SOx排放到大气中会形成酸雨污染环境.因此,超清洁燃料的生产迫在眉睫.目前主要的脱硫工艺为加氢脱硫(HDS).HDS能够有效脱除燃油中的硫醚、硫醇和二硫化物等含硫化物,但对于芳香族硫化物及其衍生物(如苯并噻吩、二苯并噻吩和4,6-二甲基二苯并噻吩等)的脱除效果较差,而且HDS需要在高温、高压且有合适催化剂存在的条件下进行反应.因此,开发操作简单、反应条件温和、能够高效脱除芳香族硫化物及其衍生物的脱硫工艺已成为目前研究的热点.催化氧化脱硫(CODS)能够在温和条件下高选择性脱除芳香族硫化物及其衍生物,作为HDS的有效补充,在深度脱硫领域的应用得到了广泛认可.目前适用于CODS的催化剂有分子筛、甲酸、过氧化物酶、氧化钼和杂多酸等.其中,含钼(VI)催化剂在CODS中表现出良好的性能,得到了广泛的研究和应用.在CODS中,催化剂载体同样起着重要作用.从实际应用角度出发,无定形二氧化硅在制备过程及经济性方面存在着不可替代的优势.到目前为止,无定形SiO2负载磷钼酸(HPMo)作为CODS催化剂的研究鲜有报道.本课题组以聚乙烯吡咯烷酮(PVP)为介孔模板剂,以正硅酸四乙酯(TEOS)为硅源,通过沉淀法直接合成了功能化含HPMo介孔复合材料HPMo-SiO2.采用XRD,FT-IR,31P-NMR和XPS等测试手段对所制备的材料进行了表征.结果表明,作为催化活性位点的钼以磷钼酸的形式存在,磷钼酸的Keggen结构在负载过程中没有遭到破坏,并且活性磷钼酸能够均匀分散在二氧化硅载体上.HPMo-SiO2的比表面积为365.0 m2/g,总孔容为1.237 cm3/g,平均孔径为12.91 nm.本文系统研究了模型油脱硫反应条件、催化剂循环使用次数及催化反应动力学.结果表明,HPMo-SiO2具有高效的脱硫活性,在反应温度为55oC,催化剂与模型油质量比为0.7%,反应时间为10 min的条件下,二苯并噻吩(DBT)脱除率可达100%;在反应温度为60oC,催化剂与模型油质量比为1.0%,反应时间为30 min的条件下,苯并噻吩(BT)脱除率可达100%.同等反应条件下,DBT的反应活性大于BT.DBT及BT的氧化脱除反应均符合表观一级动力学模型,且DBT脱除反应的表观活化能小于BT脱除反应.所制备的催化剂经过10次循环使用,DBT脱除率仍可以达到95.2%(BT为95.7%),说明所制备的HPMo-SiO2催化剂具有高活性和强稳定性.通过气质联用及微库仑仪对反应产物进行了分析,结果表明,BT和DBT的氧化产物分别为苯并噻吩砜(BTO2)和二苯并噻吩砜(DBTO2),且氧化产物全部被催化剂吸附,油品中没有含硫化合物的存在,因此不需要后续的氧化产物分离操作,提高了整个脱硫工艺的经济性,并且有效减少了分离操作带来的油品损失.     

分子氧为氧化剂磷钒酸盐为催化剂超深度氧化脱除柴油中的二苯并噻吩

一种“双帽Keggin型”磷钒酸盐在温和的反应条件下以分子氧为氧化剂氧化二苯并噻吩至二苯并噻吩砜的反应中表现出很高的催化活性. 用溶剂萃取或者选择吸附等方法可轻易地将反应产生的二苯并噻吩砜从油品中除去. 这提供了一种新型的分子氧为氧化剂的超深度氧化脱硫方法.     

MCM-41分子筛负载亚硒核过氧钨酸盐催化剂催化二苯并噻吩氧化脱硫

石油在作为燃料使用过程中常常产生各种污染,特别是油品中的含硫化合物不仅会降低油品品质,而且燃烧后产生的硫氧化物可污染大气,形成酸雨,危害人类健康.因此,油品深度脱硫是一项十分重要而紧迫的工作.
　　目前油品脱硫方法有很多种,主要分为加氢脱硫与非加氢脱硫.加氢脱硫反应条件苛刻,脱硫效率低,对设备要求高,因而非加氢脱硫正在被广泛研究.其中氧化脱硫反应条件温和,脱硫效率高,对设备要求不高,有望实现规模化应用.在氧化脱硫反应中,催化剂是研究重点,尤其是催化剂效率及可回收能力.本课题组合成的亚硒核过氧钨酸盐是一种具有高选择性和高催化活性的催化剂,但它在反应后无法实现回收再利用,从而限制了其广泛应用.为了提高该催化剂的可回收能力,本文尝试制备负载型亚硒核过氧钨酸盐用于氧化脱硫反应中,考察其催化效率及可回收能力.
　　分子筛具有孔结构,比表面积大且较为稳定,是理想的催化剂载体.本文采用浸渍法制备了MCM-41分子筛负载的亚硒核过氧钨酸盐,为了提高负载能力,减少催化剂溶脱,还制备了MCM-41-NH2分子筛负载的亚硒核过氧钨酸盐,并运用红外光谱、X射线衍射、N2吸附-脱附和透射电镜对它们进行了表征.结果显示,亚硒核过氧钨酸盐在MCM-41和MCM-41-NH2分子筛内分散均匀,表明负载成功.将负载型亚硒核过氧钨酸盐催化剂用于模拟油样二苯并噻吩(DBT)氧化脱硫实验,并用气相-火焰光度检测仪跟踪实验.结果表明,负载型和非负载型催化剂均具有较高的催化性能.模拟油样在负载型催化剂作用下氧化脱硫反应2 h后, DBT转化率达98.7%,实现了深度脱硫.此外,还优化了反应时间、反应温度及氧化剂和催化剂用量.与其它催化剂相比,在相似脱硫效率情况下,负载型催化剂的催化效率更高,反应条件更加温和,催化剂用量更少,因而更加环保和节能.对反应产物进行了红外光谱、气相-质谱联用分析以及气相色谱保留时间对比分析,结果表明DBT脱硫反应产物为DBTO2.结合相关文献,对该催化剂上DBT氧化脱硫提出了一种可能的催化氧化反应机理.
　　反应后将负载型催化剂回收过滤,洗涤和干燥后,进行下一轮氧化脱硫反应.结果表明, MCM-41分子筛负载的亚硒核过氧钨酸盐在循环使用过程中, DBT转化率下降较快,循环使用4次后, DBT转化率降至80%,而MCM-41-NH2分子筛负载的催化剂在循环使用4次后, DBT转化率仍达90%.这表明MCM-41-NH2分子筛负载的亚硒核过氧钨酸盐催化剂具有更好的稳定性和回收使用性能.
　　综上所述,负载型亚硒核过氧钨酸盐是一种高效的氧化脱硫催化剂,在较为温和的反应条件下即可实现深度催化氧化脱硫,其循环使用性能也得到明显提高.本结果可为该催化剂未来在工业上广泛应用提供一定参考.     

MCM-41负载钨磷杂多酸催化剂的性能研究

制备并表征MCM-41负载H~3PW~1~2O~4~0(PW)催化剂.PW杂多酸在MCM-41上负载量高达70%(质量分数)时,XRD中仍未检测到其晶相峰.PW杂多酸与MCM-41载体的相互作用要比与SiO~2载体的强.PW杂多酸中的质子位是非常强的酸中心,它们对NH~3的微分吸附热在160-180kJ/mol的范围.与PW杂多酸相比,PW/MCM-41催化剂的酸中心强度变弱并且分布不均匀,其酸量和酸中心分布可以通过改变PW杂多酸的负载量来调节.PW/MCM-41是一类适合于中强酸和弱酸催化反应的新型固体酸催化剂。     

氨基酸功能化磷钨酸盐的制备及其催化氧化脱硫性能

以L-丙氨酸和磷钨酸为原料,合成氨基酸功能化磷钨杂多酸盐([Ala]3PW),并采用XRD、FT-IR对其结构进行表征。以[Ala]3PW为催化剂,过氧化氢作为氧化剂,甲基咪唑四氟硼酸盐([HMIM]BF4)为萃取剂氧化萃取一体法脱除模拟油中的二苯并噻吩(DBT)。考察了反应温度、催化剂加入量、O/S物质的量比、萃取剂加入量、硫化物类型等因素对脱硫效率的影响。结果表明,在模拟油为10mL、[Ala]3PW=0.04g、O和S的物质的量比为6、V([HMIM]BF4)/V(oil)=0.6、反应温度50℃、反应时间180min的条件下,DBT的转化率可达到98.2%。催化剂循环使用4次活性没有明显的降低。     

V2O5纳米片固载Pt纳米粒子催化剂的构建及其增强催化空气氧化脱硫性能

以铂系金属为代表的贵金属催化剂在工业反应中通常表现出优异的催化性能,这是因为其具有独特的d带电子结构和较高的价电子比.近年来,由于大气排放法规愈发严苛,铂系贵金属催化剂在催化空气氧化燃油脱硫方面的研究引起了广泛关注.在该催化反应中,铂系金属纳米粒子可以有效活化空气中的氧气,产生的活性氧物种可以将油品中的噻吩类硫化物氧化为其对应的强极性砜类物质,从而可以将其从非极性的油品中分离出来,有效实现油品中硫化物的深度氧化脱除.然而,在反应过程中铂系贵金属纳米粒子易发生流失和烧结,从而导致催化剂的失活.因此,急需寻找一类可以有效固载铂系贵金属纳米粒子的载体.在目前已报道的众多载体中,以ZrO₂、TiO₂、CeO₂、ZnO等为代表的过渡金属氧化物引起了广泛的关注.通常认为,铂系贵金属纳米粒子的d轨道电子和过渡金属氧化物之间可形成金属-载体强相互作用.然而,目前所使用的过渡金属氧化物载体的比表面积较小,从而导致铂系贵金属纳米粒子难以有效且均匀地分散于其表面.本文采用热膨胀气相剥离法制备了超薄V2O5纳米片,并通过超声辅助沉积法将Pt纳米粒子固载于其表面,从而得到一系列可高效活化空气氧化脱硫的催化剂(Pt NPs-n/V₂O₅纳米片).通过电感耦合等离子体光谱、高倍透射电镜、原子力显微镜、X射线光电子能谱、X射线衍射、拉曼光谱和氮气吸附脱附等方法对催化剂的结构和形貌进行了表征.结果表明,尺寸为4-5 nm的Pt纳米粒子可有效均匀分散于层数约为6层的V2O5纳米片表面;在空气氧化脱硫反应中,当催化剂中Pt理论负载量为2 wt%时,反应5 h后,油品的脱硫率可达99.1%,实现了硫化物的深度氧化脱除.该反应体系对不同硫浓度、不同含硫底物的油品均有较好的脱除效果,但对含有烯烃、芳烃的油品脱除效果较差.此外,催化剂循环使用7次后,其脱硫活性仍无明显下降,表现出优异的重复使用性能.对反应后的催化剂进行表征,发现Pt几乎不发生流失,这可能是由于Pt纳米粒子和V₂O₅纳米片之间形成了金属-载体强相互作用.该结果为其他空气氧化反应的有效进行提供了新思路.     

Preparation and properties of zirconia nanotube-supported 12-tungstophosphoric acid catalyst

Zirconia nanotube-supported H₃PW₁₂O₄0 (HPW) catalysts exhibit high catalytic activities in the synthesis of fatty acid ethyl ester.     

Promotion of oxidative desulfurization performance of model fuel by 3DOM Ce-doped HPW/TiO2 material

Phosphotungstic acid (HPW) supported on Ce-doped three-dimensional ordered macroporous (3DOM) TiO₂ catalysts are studied in catalytic oxidation desulfurization (ODS) of model oil. The structural and textural of as-synthesized catalysts are characterized by N₂ adsorption, XRD, Raman spectroscopy, SEM-EDS, TEM, FT-IR, XPS, UV–Vis and ICP. These results upheld the existence of periodically arranged macroporous structure of catalyst, with Keggin-type of HPW dispersed homogeneously on TiO₂ matrix. Among these 3DOM Ce-doped HPW/TiO₂ materials, catalyst with 15 wt.% cerium dosage exhibits best ODS performance, which oxidized 99.8% of dibenzothiophene (DBT) into corresponding sulfone within 40 min. The excellent ODS performance of 3DOM Ce-doped HPW/TiO₂ catalyst is related to the common influence of more oxygen vacancies produced by electron transformation between Ce³⁺ and Ce⁴⁺. The chemisorbed oxygen on the surface catalyst will facilitate the selective oxidation of sulfides to sulfones. Moreover, the 3DOM structure of catalyst will further promote the mass transfer of reactants and products on the pore channel. The as-prepared catalyst shows excellent reusability in the ODS system, no obviously decrease in catalytic activity even after 6 runs.     

Immobilized VOsalpr on modified Fe3O4 nanoparticles as a magnetically separable epoxidation catalyst

Fe₃O₄ nanoparticles were prepared and modified with chloropropyl trimethoxysilane (Cl-PTMS). The N,N′-bis(3-salicylidenaminopropyl)amine (salpr) Schiff base ligand was then immobilized on modified Fe₃O₄, which was followed by the addition of VOSO₄ in order to complex it with immobilized sa0lpr. The obtained nanocatalyst designated as VO(Salpr)/SCMNPs was characterized by FT–IR, XRD, SEM, TEM, and VSM techniques. It was found that VO(salpr)/SCMNPs successfully catalyze the epoxidation of allyl alcohols, such as limonene, 1-octene-3-ol, trans-2-hexene-1-ol and geraniol with 50 to 100% conversion and 62 to 100% selectivity with tert-butylhydroperoxide (TBHP). The study of this catalyst's stability and reusability revealed that VO(salpr)/SCMNPs behaves heterogeneously with no desorption during the course of the epoxidation reactions.     

相转移催化剂对催化柴油氧化脱硫作用的数学模型

经过顺序氧化反应动力学方程、相转移催化剂强化作用数学模型方程和萃取相平衡方程的推导,确定了催化柴油氧化萃取脱硫数学模型方程。研究表明,呈指数函数形式的相转移催化剂作用数学模型具有较高的计算精度。通过模型参数估值确定了氧化速率常数的频率因子和活化能、相平衡常数、相转移催化剂作用模型参数,建立了脱硫率数学模型。模型预测显示,柴油脱硫率随着氧化时间延长呈先提高后降低的趋势;氧化时间较短时,柴油脱硫率随相转移催化剂用量提高而增大,但氧化时间较长时的情况相反;柴油脱硫率随着氧化溶液体积分数增大或萃取剂与油比增大均呈提高的趋势。     

氯化胆碱/草酸型低共熔溶剂氧化脱除模拟油硫化物

通过氯化胆碱和草酸在100℃下搅拌,合成了氯化胆碱/草酸型低共熔溶剂。以氯化胆碱/草酸为催化剂、过氧化氢为氧化剂、咪唑氟硼酸盐离子液体为萃取剂氧化萃取一体法脱除模拟油中的二苯并噻吩(DBT)。考察了反应温度、反应时间、氧化剂加入量、萃取剂类型、硫化物类型等因素对脱硫效率的影响。结果表明,当以咪唑氟硼酸盐为萃取剂,n(H2O2)/n(S)=8、反应温度30℃、反应80 min时,二苯并噻吩的脱除率可以达到95%。催化剂重复使用5次后,脱硫率仍然保持在90%。     

磷钨钒杂多酸相转移催化剂的制备及其深度氧化脱硫性能

以钒原子取代的Keggin型磷钨杂多酸与不同的季铵类阳离子表面活性剂反应合成了一系列磷钨钒杂多酸相转移催化剂,采用红外和X射线衍射对催化剂进行了表征。以H_2O_2为氧化剂,对模型柴油的氧化脱硫反应进行了研究,考察了季胺类表面活性剂种类、不同季胺盐含量、催化剂用量、氧硫比、反应温度等参数对反应的影响。结果表明,所制备的杂多酸相转移催化剂保留有杂多酸阴离子和季铵盐阳离子的结构特征。[(C_(16)H_(33)(CH_3)_3) N]_3H[PW_(11)VO_(40)]催化剂具有最佳的氧化脱硫性能和重复使用性能,在n(催化剂)/n(模型柴油)=1∶80,n(H_2O_2)/n(模型柴油)=8∶1,反应温度50℃,反应时间3 h的反应条件下,二苯并噻吩的转化率可达到100%;催化剂重复使用五次后,转化率为99.7%。反应过程中,该催化剂与反应物形成微乳体系,如同一个均相混合物,而反应结束体系静置一段时间后,催化剂和产物又形成两相,通过离心法就可以快速分离和回收催化剂。     

乳液催化剂存在下空气辅助甲酸氧化法使油品脱硫(英文)

Catalytic oxidative desulfurization(ODS) of model oil and commercial oil samples was investigated using an air-assisted performic acid oxidation system with a phase transfer or emulsion catalyst comprising a quaternary ammonium salt-based heteropolyoxometalate.Different emulsion catalysts with a Keggin type heteroployoxometalate anion(containing W,Mo,and V) and cetyltrimethylammonium bromide cation were prepared and characterized by X-ray fluorescence,Fourier transform infrared spectroscopy,and scanning electron microscopy.[C16H33N(CH3)3]3[PW9Mo3O40] was the most effective catalyst in the current oxidation system,which reduced the sulfur content of the model oil from 1275 μg/g to 57 μg/g.The reactivity order of different model sulfur compounds was thiophene < dibenzothiophene < 4,6-dimethyldibenzothiophene. The ODS of model sulfur compounds followed first order kinetics with apparent activation energy from 29 to 27 kJ/mol.The catalysts also performed efficiently in the ODS of the industrial oil samples,including untreated naphtha,light gas oil,heavy gas oil,and Athabasca oil sands derived bitumen,for which sulfur removal rates were 83%,85%,68% and 64%,respectively.     

Deep desulfurization by oxidation using an active ionic liquid‐supported Zr metal–organic framework as catalyst

In this study, a Zr metal–organic framework (UIO‐66) was synthesized with zirconium tetrachloride and terephthalic acid using the solvent method. Then various masses of 1‐methylimidazolium‐3‐propylsulfonate hydrosulfate (PSMIMHSO₄) were supported on the UIO‐66 as catalysts, which were used for catalytic oxidative desulfurization. Sulfur removal using 400 mg of 40% PSMIMHSO₄ supported on the UIO‐66 of greater than 94% was obtained at 313 K for 20 min with an O/S molar ratio of 7:1. The results obtained in this work could provide useful information for the design of water‐stable metal–organic frameworks with permanent porosity in applications of catalytic oxidative desulfurization. Copyright © 2014 John Wiley & Sons, Ltd.     

Supported 12-tungstophosphoric acid as heterogeneous and recoverable catalysts for the synthesis of oxazolines,imidazolines and thiazolines under solvent-free conditions

12-Tungstophosphoric acid (TPA) supported on silica, activated carbon and poly(4-styrylmethyl)pyridinium chloride (PMP) were found to be highly efficient catalysts for the synthesis of oxazolines, imidazolines and thiazolines from the condensation of various nitriles with aminoalcohols, ethylenediamine and cisteamine, respectively. In the case of oxazolines, dicyanobenzenes were selectively converted to mono- and bis-oxazolines in the presence of these catalysts. In the reaction of dicyanobenzenes with ethylenediamine, only mono-imidazolines were produced and the remaining cyano group did not react even with long reaction times. In the case of thiazolines, only bis-thiazolines were produced in the reaction of dicyanobenzenes with cysteamine. Furthermore, these catalysts could be recovered and reused without significant loss of their activities.     

An efficient green catalyst comprising 12-tungstophosphoric acid and MCM-41: synthesis characterization and diesterification of succinic acid,a potential bio-platform molecule

An efficient green catalyst comprising 12-tungstophosphoric acid (TPA) and MCM-41 was synthesized. The catalytic activity was evaluated for liquid phase solvent free diesterification of succinic acid. The support and the synthesized catalyst were characterized by various physico-chemical techniques. Fourier transform infrared, diffuse reflectance spectroscopy, and ³¹P NMR spectra indicate that the Keggin structure of TPA was not destroyed after anchoring to MCM-41. X-ray diffraction, scanning electron microscopy, and transmission electron microscopy show that TPA is uniformly dispersed inside the channels without disturbing the hexagonal array of MCM-41. The present contribution reports solvent free diesterification of succinic acid with alcohols under mild reaction conditions. The catalyst shows higher activity toward diester, especially for dioctyl succinate 99% yield was obtained with very high turnover number, 12.43×10⁴. Also the catalyst shows potential of being used as recyclable catalytic material after simple regeneration without loss of any catalytic activity.     

Tungstophosphoric acid nanoparticles supported on polyamic acid: A mild and recoverable heterogeneous catalyst for the selective synthesis of mono and bulky bis(1,8-dioxooctahydroxanthene)s under solvent-free conditions

A series of 1,8-dioxooctahydroxanthene derivatives and some crowded bis(1,8-dioxooctahdroxanthene) were selectively synthesized using tungstophosphoric acid nanoparticles supported on polyamic acid (TPA/PAA) as a new catalyst in solvent-free conditions. The high purity products were isolated and catalyst was easily separated in simple work-up and was recycled several times without loss of reactivity under the described reaction conditions. The reaction is characterized by short reaction time, high efficiency and environmentally friendly reaction conditions.     

磷钨酸功能化氮化碳的制备及其氧化脱硫研究

以磷钨酸和氮化碳为原料,合成磷钨酸功能化的氮化碳(g-C₃N₄/HPW),并采用XRD、SEM、FT-IR对其结构进行表征。以g-C₃N₄/HPW为催化剂,过氧化氢作为氧化剂,咪唑氟硼酸盐为萃取剂氧化萃取一体法脱除模拟油中的二苯并噻吩(DBT)。考察了反应温度、催化剂加入量、双氧水加入量、萃取剂加入量、硫化物类型等因素对脱硫效果的影响。结果表明,在模拟油为5 mL,g-C₃N₄/HPW为0.02 g,H₂O₂加入量为1.0 mL,BF₄ 为1.5 mL,反应温度70 ℃,反应120 min的条件下,DBT的转化率可达到93%。反应体系循环使用4次催化剂的活性没有明显的降低。     

Green oxidation of alcohols by using hydrogen peroxide in water in the presence of magnetic Fe3O4 nanoparticles as recoverable catalyst

Magnetically nano Fe₃O₄ efficiently catalyzes green oxidation of primary and secondary benzylic and aliphatic alcohols to give the corresponding carbonyl products in good yields. The reactions were carried out in an aqueous medium in the presence of hydrogen peroxide as an oxidant at 50°C. In addition, the magnetically nano Fe₃O₄ catalyst could be reused up to four runs without any significant loss of activities. Catalyst was characterized by scanning electron microscopy, transmission electron microscopy, X-ray powder diffraction, thermogravimetric analysis, vibrating sample magnetometer, and IR.