夹芯圆柱壳在水下爆炸载荷作用下的抗冲击特性

采用声固耦合方法对夹芯圆柱壳和等质量的普通圆柱壳在爆炸载荷作用下的应变、速度和加速度进行有限元计算。结果表明:夹芯防护层对爆炸冲击波可起到较好的衰减作用,即通过芯层的塑性变形,耗散了冲击过程中产生的大部分能量,对里面的圆柱壳体起到较好的保护作用,由于夹芯防护层的存在,与等质量的普通圆柱壳相比,夹芯圆柱壳能够承受更强的爆炸冲击波,降低结构的整体变形。     

Some Approaches to the Solution of Problems on Thin Shells with Variable Geometrical and Mechanical Parameters

A number of approaches to the solution of stress problems for anisotropic inhomogeneous shells in the classical formulation are discussed. A review is made of approaches to the solution of one- and two-dimensional static problems for thin shells with variable parameters and to the solution of stress–strain problems for anisotropic shells of revolution under axisymmetric and non-axisymmetric loading, shallow convexo-convex shells, noncircular cylindrical shells, plates of various shapes, and shells of complex geometry     

Nonlinear Theory of Dynamic Stability for Laminated Composite Cylindrical Shells

ＩｎｔｒｏｄｕｃｔｉｏｎＷｈｅｎｃｏｍｐｏｓｉｔｅｃｙｌｉｎｄｒｉｃａｌｓｈｅｌｌｓａｒｅｕｎｄｅｒｔｈｅａｃｔｉｏｎｏｆｄｙｎａｍｉｃｌｏａｄｉｎｇ ,ｔｈｅｙｍａｙｆａｌｌｉｎｄｙｎａｍｉｃｂｕｃｋｌｉｎｇｏｒｄｙｎａｍｉｃｉｎｓｔａｂｉｌｉｔｙ .Ｉｆｔｈｅｄｙｎａｍｉｃｌｏａｄｉｓｓｕｄｄｅｎｌｙａｐｐｌｉｅｄ ,ｏｒｉｔｉｓｃｈａｎｇｉｎｇｉｎｓｔａｎｔａｎｅｏｕｓｌｙ ,ｓｕｃｈａｓｉｍｐｕｌｓｉｖｅｌｏａｄｉｎｇ ,ｔｈｅｎ ,ｄｙｎａｍｉｃｂｕｃｋｌｉｎｇｗｉｌｌｈａｐｐｅｎｆｏｒｔｈｅｓｈ…     

The effect of transverse shear deformation on stress concentration factors for shallow shells with a small circular hole

Simplified equations are derived for the analysis of stress concentration for shear-deformable shallow shells with a small hole.General solutions of the equations are obtained,in terms of series,for shallow spherical shells and shallow circular cylindrical shells with asmall circular hole.Approximate explicit solutions and numerical results are obtianed forthe stress concentration factors of shallow circular cylindrical shells with a small hole onwhich uniform pressure is acting.     

基于混合变量条形传递函数方法的圆柱壳屈曲分析

提出了一种分析交各向异性圆柱壳和阶梯圆柱壳稳定性问题的混合变量条形传递函数方法。首先基于Fluegge薄壳理论，通过定义广义位移变量和对应的广义力变量，建立了圆柱壳混合变量能量泛函；然后通过引入条形单元，定义混合状态变量和采用传递函数方法对超级壳单元求解，得到具有多种边界条件圆柱壳屈曲问题的半解析解；最后通过位移连续和力平衡条件，可以得到阶梯圆柱壳屈曲问题的解。理论解推导过程表明此方法在引入边界条件和进行阶梯圆柱壳求解时非常方便。算例分析的结果验证了本方法的正确性。     

Complex equations of flexible circular ring shells overall-bending in a meridian plane and general solution for the slender ring shells

ＩｎｔｒｏｄｕｃｔｉｏｎＥｑｕａｔｉｏｎｓｆｏｒｃｉｒｃｕｌａｒｒｉｎｇｓｈｅｌｌｓａｒｅｄｉｆｆｉｃｕｌｔｔｏｓｏｌｖｅ．Ｔｈｅｒｅｓｅａｒｃｈｏｆｔｈｉｓｐｒｏｂｌｅｍｓｔａｒｔｅｄａｔｔｈｅｂｅｇｉｎｎｉｎｇｏｆｔｈｉｓｃｅｎｔｕｒｙ．Ｉｎｔｈｅｌａｔｅ１９７０ｓａｎｄｅａｒｌｙ１９８０ｓ,Ｗ．Ｚ．Ｃｈｉｅｎ（１９７９,１９８０,１９８１）［１～３］ｒｅｂｕｉｌｔｔｈｅｃｏｍｐｌｅｘｅｑｕａｔｉｏｎｓｏｆａｘｉｓ＿ｓｙｍｍｅｔｒｉｃａｌｌｙｌｏａｄｅｄｒｉｎｇｓｈｅｌｌｓｐｒｅｓｅｎｔｅｄ…     

Stability of corrugated composite noncircular cylindrical shells under external pressure

Cylindrical shells consisting of cylindrical panels of smaller radius and subjected to uniform external pressure are analyzed for stability. The geometrical parameters of the shells are approximated by Fourier series on a discrete set of points. The Timoshenko theory of shells is used. The solution is represented in the form of trigonometric series. It is shown that short-and medium-length shells with cylindrical panels are advantageous over circular shells. By selecting appropriate parameters of the panels, keeping the mass of the shell constant, it is possible to achieve a significant gain in critical loads. The shells under consideration are less effective than isotropic shells. Shells with sinusoidal corrugation under external pressure are of no practical interest __________ Translated from Prikladnaya Mekhanika, Vol. 43, No. 12, pp. 91–102, December 2007.     

Timoshenko-Type Theory in the Stability Analysis of Corrugated Cylindrical Shells

A technique is proposed for stability analysis of longitudinally corrugated shells under axial compression. The technique employs the equations of the Timoshenko-type nonlinear theory of shells. The geometrical parameters of shells are specified on discrete set of points and are approximated by segments of Fourier series. Infinite systems of homogeneous algebraic equations are derived from a variational equation written in displacements to determine the critical loads and buckling modes. Specific types of corrugated isotropic metal and fiberglass shells are considered. The calculated results are compared with those obtained within the framework of the classical theory of shells. It is shown that the Timoshenko-type theory extends significantly the possibility of exact allowance for the geometrical parameters and material properties of corrugated shells compared with Kirchhoff–Love theory.     

Study of nonlinear deformation and stability of reinforced shells under combined loading by a bending moment and a transverse boundary force

We present a finite-element statement for the solution of stability problems for reinforced elliptic cylindrical shells with moment properties and nonlinearity in their precritical stressstrain state taken into account. Integrating the equations obtained by equating the linear strain components with zero, we find explicit expressions for the displacements of elements of noncircular cylindrical shells as rigid bodies. Using these expressions, we construct the shape functions of a fourangle finite element of natural curvature and develop an effective algorithm for studying nonlinear deformation and stability of shells. We study the stability of reinforced elliptic cylindrical shells under combined loading by a transverse boundary force and a bending moment and investigate how the ellipticity of the shells and the nonlinearity of deformation at the precritical stage affect the shell stability.     

圆柱壳稳定性问题的研究进展

圆柱壳是工程实际中广泛应用的结构,其主要破坏形式是屈曲失稳．作为力学领域的经典问题,圆柱壳稳定性问题的研究非常之多．其中,受均匀轴向压力的圆柱壳由于临界屈曲载荷的理论预测值与早期试验结果之间的巨大差异,更是推动了壳体稳定性理论的不断发展．本文简要回顾了壳体稳定性理论的发展和分类,并对轴压圆柱壳体试验结果分散且远低于理论预测值的原因及含缺陷圆柱壳体的稳定性研究方法进行了总结,然后综述了地下空间顶管、储油罐、加筋圆柱壳及脱层圆柱壳等实际工程中广泛应用的圆柱壳结构稳定性研究的现状和趋势,最后展望了将来对工程应用中圆柱壳结构的稳定性研究的难点和方向．     

Simplified Plastic Analysis of Edge-Restrained Shallow Shells

Abstract

This paper gives a brief review of recent theoretical and experimental work on compressed and edge-restrained shallow shells. Yield point and post-yield point behavior of these shells is discussed and the available theoretical results are viewed in light of some experimental evidence. It is shown that the solutions for edge-restrained shallow shells are contained in the solutions for the compressed shallow shells.     

复合材料层合板壳非线性力学的研究进展

复合材料层合板壳是由多种组分材料组合而成.与单一材料的板壳结构相比,它无明确的材料主方向,各层间材料间断和不连续,具有明显的几何非线性和材料非线性等新的特点.其失效模式也远比单一材料的情况复杂,具有如基体开裂、脱胶、分层、分层裂纹偏转、多分层以及分层传播等多种模式.各国学者基于不同的考虑,提出了多种方法研究复合材料层合板壳的失效.首先,在简要介绍了层合板壳线性力学基本理论的基础上,重点回顾了层合板壳结构非线性力学几种基本理论发展的过程,主要阐述了经典大挠度非线性理论、一阶剪切变形理论、高阶剪切变形理论、锯齿理论、广义分层理论的理论体系及基本公式,并对几种理论之间的联系和差异进行了总结;其次,介绍了当前层合结构非线性领域的研究进展,综述了典型复合材料板壳结构的失效机理及优化设计、复合材料板壳结构在复杂环境下的破坏机理、复合材料板壳结构的物理非线性、含脱层纤维增强复合材料板壳结构的破坏机理等各研究热点的最新研究成果;最后,对该领域未来的研究方向进行了展望.     

Stability of circumferentially corrugated cylindrical shells under external pressure

Corrugated shells of revolution that may be considered cylindrical when the corrugation amplitude is small are analyzed for stability. The corrugations are transverse to the axis of revolution. Isotropic and orthotropic shells with sine-shaped meridian under uniform external compression are analyzed for stability. It is shown that the stability of corrugated shells can be significantly improved, compared with cylindrical shells, by selecting appropriate number and amplitude of half-waves. A relationship between the buckling modes and the change in the critical loads is established     

NONLINEAR THEORY OF MULTILAYER SANDWICH SHELLS AND ITS APPLICATION (Ⅱ)──FUNDAMENTAL EQUATIONS FOR ORTHOTROPIC SHALLOW SHELLS

This paper applied the simplified theory for multilayer sandwich shells undergoing moderate/small rotations in Ref. [1] to shallow shells. The equilibrium equations and boundary conditions of large deflection of orthotropic and the special case, isotropic shells, are presented.     

Fundamental-solution methods in stress-concentration problems for thin elastic shells

This paper deals with fundamental-solution methods applied to stress-concentration problems for thin elastic shells. Publications concerned with the relevant division of the theory of plates and shells are reviewed. The theories behind the methods are described, and specific results for static and dynamic concentrated loads are presented. The capabilities of the methods are illustrated by fracture problems for orthotropic shells with notches and holes under mechanical loading and for isotropic shells with notches under thermal loading __________ Translated from Prikladnaya Mekhanika, Vol. 43, No. 7, pp. 3–25, July 2007.     

Stability analysis of loaded coaxial cylindrical shells with internal fluid flow

We present numerical results for dynamical stability of loaded coaxial shells of revolution interacting with the internal fluid flow. The motion of the incompressible fluid is described in the framework of the theory of frictionless potential flow, whereas the static load acting on the shells is caused by the steady forces of viscous drag arising in the viscous turbulent flow in a closed channel. For shells with different boundary conditions, we study how the stability boundary is affected by the value of the gap between the shells for different versions of the outer shell rigidity and fluid flow. We show that, as in the case of unloaded coaxial shells, there is a significant deviation from the previous numerical and analytical results.     

Slow Motion of an Assemblage of Porous Spherical Shells Relative to a Fluid

The body-force-driven motion of a homogeneous distribution of spherically symmetric porous shells in an incompressible Newtonian fluid and the fluid flow through a bed of these shell particles are investigated analytically. The effect of the hydrodynamic interaction among the porous shell particles is taken into account by employing a cell-model representation. In the limit of small Reynolds number, the Stokes and Brinkman equations are solved for the flow field around a single particle in a unit cell, and the drag force acting on the particle by the fluid is obtained in closed forms. For a suspension of porous spherical shells, the mobility of the particles decreases or the hydrodynamic interaction among the particles increases monotonically with a decrease in the permeability of the porous shells. The effect of particle interactions on the creeping motion of porous spherical shells relative to a fluid can be quite significant in some situations. In the limiting cases, the analytical solution describing the drag force or mobility for a suspension of porous spherical shells reduces to those for suspensions of impermeable solid spheres and of porous spheres. The particle-interaction behavior for a suspension of porous spherical shells with a relatively low permeability may be approximated by that of permeable spheres when the porous shells are sufficiently thick.     

任意形状薄壳的弹性稳定性方程

本文用张量导出了任意形状薄壳的统一的弹性稳定性方程组,并且在正交曲线坐标系下化成了以张量的物理分量表示的方程,进而可以将正圆锥壳、球壳、圆柱壳、椭球壳、圆板、矩形板等形状的壳和板作为特例来研究。     

Optimal design of axisymmetric plastic shallow shells of von Mises material

An optimal design technique developed earlier for axisymmetric plates and circular cylindrical shells is accommodated for shallow spherical shells subjected to uniform transverse pressure. Material of the shells is assumed to be rigid-plastic obeying the von Mises yield condition and the associated deformation law. The post-yield behaviour of the shells is taken into account. The weight minimization is performed under the condition that the maximal deflection of the shell of variable thickness coincides with the deflection of the reference shell of constant thickness. The problem is transformed into a non-linear boundary value problem which is solved numerically.     

Geometrically nonlinear bending of thin-walled shells and plates under creep-damage conditions

Summary A phenomenological constitutive model for characterization of creep and damage processes in metals is applied to the simulation of mechanical behaviour of thin-walled shells and plates. Basic equations of the shell theory are formulated with geometrical nonlinearities at finite time-dependent deflections of shells and plates in moderate bending. Numerical solutions of initial/boundary-value problems have been obtained for rectangular thin plates (two-dimensional case) and axisymmetrically loaded shells of revolution (one-dimensional case). Based on the numerical examples for the two problems, the influence of geometrical nonlinearities on the creep deformation and damage evolution in shells and plates is discussed. Accepted for publication 30 October 1996